Identifying the course of the greater palatine artery using intraoral ultrasonography: cohort study.

AIMS: The greater palatine artery (GPA) is one of the most important anatomical structure for free gingival grafts or connective-tissue grafts during soft tissue surgery for dental implants. Several studies have identified the approximate location of the GPA, but it is impossible to detect its exact location during surgery due to large variability between individuals. The authors, therefore, investigated the course of the GPA using intraoral ultrasonography to determine the feasibility of using real-time nonionizing ultrasonography for implant surgery. MATERIALS AND METHODS: This study included 40 healthy young participants. The courses of the GPA were identified using intraoral ultrasound probes from the first premolar to the second molar. The distance from the gingival margin to the GPA (GM-GPA) and the depth of the palatal gingiva from the GPA (PG-GPA) were measured by two independent examiners. Measurements were analyzed statistically, and interexaminer reliability was determined. RESULTS: The distance of the GM-GPA and the mean depth of the PG-GPA were 14.8 ± 1.6 mm and 4.10 ± 0.51 mm (mean ± SD), respectively. GM-GPA decreased when the GPA ran from the second molar to the first molar, and GM-GPA was significantly shorter in females (P < 0.05). PG-GPA increased when the GPA ran to the posterior teeth. Interexaminer measurement agreements were excellent, with intraclass correlation coefficient values of 0.983 and 0.918 for GM-GPA and PG-GPA, respectively. CONCLUSIONS: Using an intraoral ultrasound probe, real-time GPA tracking is possible, which is expected to help reduce the possibility of bleeding during surgery.

Foreign body aspiration and ingestion in dental clinic: a seven-year retrospective study.

Background: This retrospective study investigated the incidence rate of accidental foreign body aspiration and ingestion according to patient sex, age, and dental department. This study aimed to verify whether the incidence rate is higher in geriatric than in younger patients and whether it is different among dental departments. Methods: Accidental foreign body aspiration and ingestion cases were collected from electronic health records and the safety report system of Yonsei University Dental Hospital from January 2011 to December 2017. The collected data included patients' age, sex, medical conditions, treatment procedures, and foreign objects that were accidentally aspirated or ingested. The incidence rate was calculated as the number of accidental foreign body aspirations and ingestions relative to the total number of patient visits. Differences depending on the patients' sex, age, and dental department were statistically identified. Results: There were 2 aspiration and 37 ingestion cases during the 7-year analysis period. The male to female incidence ratio was 2.8:1. The incidence rate increased with age and increased rapidly among those aged 80 years or older. Seven of the 37 patients with accidental foreign body ingestion had intellectual disability, Lou Gehrig's disease, dystonia, or oral and maxillofacial cancer. The incidence rate was highest in the Predoctoral Student Clinic and the Department of Prosthodontics. The most frequently swallowed objects were fixed dental prostheses and dental implant components. Conclusion: The incidence rate of accidental foreign body aspiration and ingestion differed according to patient sex, age, and dental department. Dental practitioners must identify high-risk patients and apply various methods to prevent accidental foreign body aspiration and ingestion in dental clinics. Inexperienced practitioners should be particularly careful.

Conservative orthodontic treatment for severe pathologic migration following total glossectomy: A case report.

Glossectomy combined with radiotherapy causes different levels of tongue function disorders and leads to severe malocclusion, with poor periodontal status in cancer survivors. Although affected patients require regular access to orthodontic care, special considerations are crucial for treatment planning. This case report describes the satisfactory orthodontic management for the correction of severe dental crowding in a 43-year-old female 6 years after treatment for tongue cancer with total glossectomy combined with radiotherapy, to envision the possibility of orthodontic care for oral cancer survivors. Extraction was performed to correct dental crowding and establish proper occlusion following alignment, after considering the possibility of osteoradionecrosis. Orthodontic mini-implants were used to provide skeletal anchorage required for closure of the extraction space and intrusion of the anterior teeth. The dental crowding was corrected, and Class I occlusal relationship was established after 36 months of treatment. The treatment outcome was sustained after 15 months of retention, and long-term follow-up was recommended.

Location of the Mandibular Incisive Canal Related to the Placement of Dental Implants: A Case Report.

Cone-beam computerized tomography (CBCT) can show an uncommon mandibular incisive canal that cannot be detected by panoramic radiography, which is used preoperatively to form the initial plan of the size and length of an implant fixture for surgical placement in the mandibular interforaminal area. Determination of the position and anatomical configuration of the mandibular incisive canal is challenging. The purpose of this case report is to discuss anatomical variations in the mandibular incisive canal and the mental canal by reviewing previous studies. Furthermore, we propose that the anterior loop length of the mental canal near the mental foramen, as well as the diameter of the mandibular incisive canal, should be verified by CBCT prior to performing implant surgery in the anterior mandibular area to prevent possible nerve damage.

Foreign body removal assisted by an intraoral ultrasound probe.

Ultrasonography has recently been applied to the field of oral and maxillofacial surgery because of its noninvasiveness and ease of use. However, traditional transducers are not used in the intraoral area because of their large size. A novel intraoral transducer was introduced with size, volume, and axis modifications. This new transducer allows the surgeon to approach the intraoral region during dental procedures. This report describes a case of successful removal of a foreign body using the newly developed intraoral ultrasound probe. Precise localization and minimally invasive removal of the foreign body using the intraoral transducer were simultaneously conducted. Because of its many advantages, this intraoral ultrasound transducer has the potential to be applied in oral and maxillofacial surgery.

Long-Term Stability of Pre-Orthodontic Orthognathic Bimaxillary Surgery Using Intraoral Vertical Ramus Osteotomy Versus Conventional Surgery.

PURPOSE: The aim of the present study was to compare the long-term stability of bimaxillary surgery using an intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontic treatment. MATERIALS AND METHODS: The present retrospective study included 31 consecutive patients with skeletal Class III malocclusions who had undergone bimaxillary surgery (Le Fort I osteotomy and bilateral IVRO). Patients were divided into 2 groups based on treatment type: pre-orthodontic orthognathic surgery (POGS; n = 17) and conventional surgery with presurgical orthodontic treatment (CS; n = 14). Lateral cephalograms were obtained before surgery, 1 day after surgery, 1 month after surgery, 1 year after surgery, and 2 years after surgery to evaluate skeletal and soft tissue changes between the 2 groups. Data were analyzed using χ2 tests, Mann-Whitney U tests, repeated-measures analyses of variance, and independent t tests. RESULTS: There was no significant difference in skeletal or soft tissue measurements-with the exception of the angle between the sella-and-nasion plane and the occlusal plane (SN-OP; P < .001)-between the CS and POGS groups at 2 years after IVRO. The SN-OP had increased in the CS group but decreased in the POGS group at 2 years after surgery. CONCLUSIONS: These findings suggest that POGS and CS have similar long-term stability in patients with skeletal Class III malocclusion.

Single-Tooth Osteotomy Using Piezoelectric Devices to Treat an Ankylosed Maxillary Molar.

Single-tooth osteotomy is a surgical technique in which the tooth and adjacent bone with sufficient soft tissue are repositioned in a single step or moved orthodontically. It is not used in the maxillary posterior region because of poor accessibility, bleeding complications, and anatomical limitations such as the maxillary sinus. However, the development of piezoelectric surgical devices and the popularization of the sinus floor elevation procedure have simplified the approach to the posterior maxillary area. This article reports two cases of single-tooth osteotomy of ankylosed teeth that were performed safely in the posterior maxilla with the use of a piezoelectric device and a sinus membrane elevation. In addition, several merits of this approach as compared with conventional osteotomy are described.

Mandibular metastasis of cholangiocarcinoma: A case report.

Tumors metastasizing from distant regions to the oral and maxillofacial region are uncommon, comprising only 1%-2% of all malignancies. Cholangiocarcinoma is a malignancy that arises from cholangiocytes, which are epithelial cells that line the bile ducts. These cancers are difficult to diagnose and have a poor prognosis. In this paper, we report a rare case of mandibular metastasis of cholangiocarcinoma diagnosed at the primary site and discuss the radiographic findings observed in this case.

Correlation analysis of three-dimensional changes of hard and soft tissues in class III orthognathic surgery patients using cone-beam computed tomography.

BACKGROUND: This study was to investigate the correlation between changes of the soft and hard tissues three-dimensionally in class III orthognathic patients using cone-beam computed tomography. METHODS: Cone-beam computed tomography images were obtained within 2 weeks before surgery and at 6 months after surgery in 18 adult class III patients who underwent Le Fort I osteotomy and bilateral intraoral vertical ramus osteotomy. Subjects were divided into group 1 with no mandibular asymmetry (menton deviation, <2 mm; n = 9) and group 2 with mandibular asymmetry (menton deviation, >4 mm; n = 9). Landmarks were designated on the reconstructed three-dimensional models. Correlations and proportions of changes of the soft tissue to hard tissue were calculated. RESULTS: There were significant correlations of ΔB' to ΔB and ΔPog' to ΔPog in both groups on the horizontal axis (P < 0.05), and their proportions were 0.53 and 0.67 in group 1 and 0.77 and 0.88 in group 2, respectively. There were significant correlations of ΔB' to ΔB, ΔPog' to ΔPog, and ΔMe' to ΔMe on the sagittal axis in both groups (P < 0.05), and their proportions were 0.94, 0.84, and 0.96 in group 1 and 0.95, 0.91, and 1.03 in group 2, respectively. There were significant correlations of the three-dimensional distances between ΔB' to ΔB, ΔPog' to ΔPog, and ΔMe' to ΔMe in both groups (P < 0.05), and their proportions were 0.92, 0.79, and 0.95 in group 1 and 0.92, 0.88, and 0.97 in group 2, respectively. However, there were no significant correlations between changes in soft and hard tissues on the vertical axis in both groups (P > 0.05). CONCLUSIONS: In class III orthognathic patients with mandibular asymmetry, the proportions of ΔB' to ΔB, ΔPog' to ΔPog, and ΔMe' to ΔMe on the horizontal and sagittal axes and the three-dimensional distances were different from patients with no mandibular asymmetry.

Endodontic and surgical treatment of root damage caused by orthodontic miniscrew placement.

INTRODUCTION: Miniscrews are being increasingly used for anchorage control in orthodontics. Despite the concern over root damage caused by miniscrews, there are few reports of precise clinical evaluations and appropriate management of that damage. In the case presented herein, the root damage caused by the placement of miniscrews was repaired by root canal treatment and surgical intervention. METHODS: A 44-year-old man received orthodontic treatment for intrusion of the left maxillary first molar with a miniscrew anchorage system. During that treatment, the miniscrews had fallen out and had to be reinserted more than 6 times in the same area. Two years later, the patient complained of a spontaneous pain in the maxillary left molar region. Although the patient received root canal treatment, intraoral sinus tracts could still be detected, and the patient's discomfort persisted. Periradicular surgery revealed that the persistent infection was related to root surface damage caused by orthodontic miniscrew placement. Healing was achieved by a combination of root canal treatment and surgical intervention. RESULTS: Scanning electron microscopy of the damaged distobuccal root apex revealed a mature biofilm consisting of a network of matrix that contained mostly rod-like and spherical bacteria. At a 12-month recall checkup, the patient was free of pain. A repeat periapical radiograph revealed reduction of the pretreatment radiolucent lesion. CONCLUSIONS: More careful planning of miniscrew placement is necessary to lessen the danger of root damage. Furthermore, a precise evaluation of both root and pulpal damage and careful consideration of the choice of optimal treatment modality are needed.

Implant displacement into the mandible: an unusual complication during implant surgery.

In contrast with problems regarding initial stability of dental implants in the posterior maxilla, heat generation during bone drilling is one of the complications that can occur in the mandible which is usually composed of dense bone. This report presents an unusual case of implant displacement into the mandibular posterior area of a middle-aged woman. This problem was presumably caused by poor bone density, loss of cortical bone engagement, and differences in bone quality between the alveolar bone and the basal bone.

A radiographic study of the posterior superior alveolar artery.

PURPOSE: The purpose of this study was to elucidate the differences of the prevalence and diameter of the posterior superior alveolar artery (PSAA) and the distance of its inferior border from the alveolar crest on computed tomography (CT) images according to age and sex. MATERIALS AND METHODS: CT images of maxilla in 200 patients were randomly selected from patients who underwent CT imaging at Yonsei University Dental Hospital, and analyzed. The prevalence of the PSAA in maxillary sinus and the distance of its inferior border from the alveolar crest in the premolar and molar area were measured. RESULTS: The average prevalence of the PSAA on CT images was 52.0%, and it is higher in males (64%) than in females (40%). The diameter of the PSAA was 1.52 ± 0.47 mm (mean ± SD), and larger in males. The distance from the PSAA to the alveolar crest was greater in the premolar area (18.90 ± 4.21 mm) than in the molar area (15.45 ± 4.04 mm), and it did not differ significantly with age or sex. CONCLUSIONS: The prevalence of the PSAA on CT images was higher, and the diameter was larger in males. The PSAA was more close to the alveolar crest in the molar areas. The evaluation of the PSAA in maxillary sinus on CT images before surgery could reduce the likelihood of excess bleeding during surgery especially in molar areas.

Mesiobuccal root canal anatomy of Korean maxillary first and second molars by cone-beam computed tomography.

OBJECTIVE: The aim of this study was to investigate the types of canal configurations and the incidence of a second mesiobuccal (MB2) canal in Korean maxillary molar mesiobuccal (MB) roots by analyzing cone-beam computed tomographic (CBCT) images. STUDY DESIGN: Three-dimensional CBCT images of 458 maxillary first molars and 467 second molars from 276 Korean patients were analyzed to determine the incidence of an MB2 canal, the types of canal configurations, and the correlations between the incidence of an MB2 canal and age, gender, and tooth position. RESULTS: The incidence of 2-canaled MB roots was 71.8% in first molars and 42.2% in second molars, with the most common configurations being Weine types III and II. The frequency of an MB2 canal decreased with age in both molars (P < .05). CONCLUSIONS: Types III and II canal configurations were the most prevalent in the 2-canaled MB roots of Korean maxillary molars.

Orthodontic extrusion of the lower third molar with an orthodontic mini implant.

Neurologic changes owing to damage to the inferior alveolar nerve (IAN) are the most serious complication of lower third molar (M3) extraction because of their close spatial relationship. We adopted the concept of regional orthodontic treatment and extrusion, using skeletal anchorage with an orthodontic mini implant. Two malformed M3s that were closely apposed to the IAN were extruded with the aid of 3 or 4 orthodontic brackets and a mini implant. Both of the M3s were extruded successfully. The patients experienced little discomfort with the orthodontic appliances and there was neither permanent neurologic damage nor fracture of the root fragments following subsequent M3 extraction. Orthodontic treatment using a miniscrew to separate the IAN and M3, or luxation of the M3 may be a good alternative treatment option for extrusion of a vertically impacted lower M3 with fragile roots.

Alignment of CT images of skull dysmorphology using anatomy-based perpendicular axes.

Rigid body registration of 3D CT scans, based on manual identification of homologous landmarks, is useful for the visual analysis of skull dysmorphology. In this paper, a robust and simple alignment method was proposed to allow for the comparison of skull morphologies, within and between individuals with craniofacial anomalies, based on 3D CT scans, and the minimum number of anatomical landmarks, under rigidity and uniqueness constraints. Three perpendicular axes, extracted from anatomical landmarks, define the absolute coordinate system, through a rigid body transformation, to align multiple CT images for different patients and acquisition times. The accuracy of the alignment method depends on the accuracy of the localized landmarks and target points. The numerical simulation generalizes the accuracy requirements of the alignment method. Experiments using a human dried skull specimen, and ten sets of skull CT images (the pre- and post-operative CT scans of four plagiocephaly, and one fibrous dysplasia patients), demonstrated the feasibility of the technique in clinical practice.

Osseointegration assessment of dental implants using a synchrotron radiation imaging technique: a preliminary study.

PURPOSE: This study tests the possibility of using synchrotron radiation (SR) x-ray micro-imaging as a new method to evaluate osseointegration. MATERIALS AND METHODS: A simple imaging setup with primarily unmonochromatic SR was used to study the interface of a dental implant in contact with bone. The samples were prepared by sectioning the undecalcified specimen of a titanium screw implanted in the tibia of a New Zealand white rabbit. Radiographs of the interface between surrounding tissues and dental titanium implant were imaged using the SR imaging system at PLS (Pohang Light Source) 5C1 beamline, a micro-computed tomography (microCT) system (SkyScan-1072), and a conventional dental x-ray system (Siemens Heliodent MD). RESULTS: The image quality of the osseointegrated titanium implant was compared among the 3 imaging systems. The SR imaging technique showed greater details than other radiographic modalities for evaluation of the healing stage of bone-implant contact. DISCUSSION: The evaluation was especially focused on the image quality of the osseous contact at the bone-to-implant interfaces. CONCLUSIONS: This SR imaging technique provides finer details and can be expected to make an impact in the clinical study of osseointegration.