Green synthesis of silver nanoparticles-capped aminated lignin as a robust active catalyst for dye discoloration.

Considering the severity of global environmental issues, biomass-derived products have received significant attention as alternatives to foster sustainability and eco-friendliness. The use of metal nanoparticle catalysts for dye decomposition is emerging as a promising approach for environmentally friendly dye removal. In this study, an aminosilane-modified lignin (AML)/silver nanoparticle (AgNP) composite was fabricated and used as a hydrogenation catalyst. The AgNPs were well dispersed on the AML surface and formed strong bonds within the AML/AgNP complex. AML also served as an effective reducing and capping agent for Ag(I) ions. The AML/AgNPs were found to be an efficient catalyst with excellent dye degradation ability and easy reusability. Biomass-derived lignin can be used as a reducing and capping agent for metals and this complex can be used as a high-value bio-catalyst for wastewater remediation.

Anti-Obesity Effect of Lactobacillus acidophilus DS0079 (YBS1) by Inhibition of Adipocyte Differentiation through Regulation of p38 MAPK/PPARγ Signaling.

Obesity is spawned by an inequality between the portion of energy consumed and the quantity of energy expended. Disease entities such as cardiovascular disease, arteriosclerosis, hypertension, and cancer, which are correlated with obesity, influence society and the economy. Suppression of adipogenesis, the process of white adipocyte generation, remains a promising approach for treating obesity. Oil Red O staining was used to differentiate 3T3-L1 cells for screening 20 distinct Lactobacillus species. Among these, Lactobacillus acidophilus DS0079, referred to as YBS1, was selected for further study. YBS1 therapy decreased 3T3-L1 cell development. Triglyceride accumulation and mRNA expression of the primary adipogenic marker, peroxisome proliferator-activated receptor gamma (PPARγ), including its downstream target genes, adipocyte fatty acid binding protein 4 and adiponectin, were almost eliminated. YBS1 inhibited adipocyte differentiation at the early stage (days 0-2), but no significant difference was noted between the mid-stage (days 2-4) and late-stage (days 4-6) development. YBS1 stimulated the activation of p38 mitogen-activated protein kinase (p38 MAPK) during the early stages of adipogenesis; however, this effect was eliminated by the SB203580 inhibitor. The data showed that YBS1 administration inhibited the initial development of adipocytes via stimulation of the p38 MAPK signaling pathway, which in turn controlled PPARγ expression. In summary, YBS1 has potential efficacy as an anti-obesity supplement and requires further exploration.

Incidence and outcomes of intraoperative periprosthetic acetabular fractures during cementless total hip arthroplasty: a prospective three-dimensional computer tomography-based study.

PURPOSE: Unlike periprosthetic femoral fractures, periprosthetic acetabular fractures during total hip arthroplasty (THA) have not been evaluated in detail. We prospectively evaluated the incidence, patterns, risk factors, and clinical outcomes of intraoperative periprosthetic acetabular fractures using pre- and postoperative computer tomography (CT). METHODS: In this prospective single-centre study, we evaluated 234 consecutive patients (250 hips) who underwent THA and three-dimensional CT before and after the surgery. We assessed the incidence, pattern of fractures, outcomes for each fracture pattern, reoperation and revision rates, Harris hip score, and visual analog scale (VAS) for pain. Multivariate regression models were used to identify risk factors for periprosthetic acetabular fractures. RESULTS: In total, 43 periprosthetic acetabular fractures (17.2%) were identified via CT. Fractures occurred most frequently at the superolateral wall. Early cup migration occurred in three hips. None of the patients underwent revision surgery for acetabular loosening. Regression modeling showed that rheumatoid arthritis was a significant predictor of periprosthetic acetabular fractures. CONCLUSIONS: Periprosthetic acetabular fractures are not infrequent during cementless THA and are more common in patients with rheumatoid arthritis.

Behavioral and transcriptional effects of repeated electroconvulsive seizures in the neonatal MK-801-treated rat model of schizophrenia.

RATIONALE: Electroconvulsive therapy (ECT) is an effective treatment modality for schizophrenia. However, its antipsychotic-like mechanism remains unclear. OBJECTIVES: To gain insight into the antipsychotic-like actions of ECT, this study investigated how repeated treatments of electroconvulsive seizure (ECS), an animal model for ECT, affect the behavioral and transcriptomic profile of a neurodevelopmental animal model of schizophrenia. METHODS: Two injections of MK-801 or saline were administered to rats on postnatal day 7 (PN7), and either repeated ECS treatments (E10X) or sham shock was conducted daily from PN50 to PN59. Ultimately, the rats were divided into vehicle/sham (V/S), MK-801/sham (M/S), vehicle/ECS (V/E), and MK-801/ECS (M/E) groups. On PN59, prepulse inhibition and locomotor activity were tested. Prefrontal cortex transcriptomes were analyzed with mRNA sequencing and network and pathway analyses, and quantitative real-time polymerase chain reaction (qPCR) analyses were subsequently conducted. RESULTS: Prepulse inhibition deficit was induced by MK-801 and normalized by E10X. In M/S vs. M/E model, Egr1, Mmp9, and S100a6 were identified as center genes, and interleukin-17 (IL-17), nuclear factor kappa B (NF-κB), and tumor necrosis factor (TNF) signaling pathways were identified as the three most relevant pathways. In the V/E vs. V/S model, mitophagy, NF-κB, and receptor for advanced glycation end products (RAGE) pathways were identified. qPCR analyses demonstrated that Igfbp6, Btf3, Cox6a2, and H2az1 were downregulated in M/S and upregulated in M/E. CONCLUSIONS: E10X reverses the behavioral changes induced by MK-801 and produces transcriptional changes in inflammatory, insulin, and mitophagy pathways, which provide mechanistic insight into the antipsychotic-like mechanism of ECT.

Exosomes in ascites from patients with human pancreatic cancer enhance remote metastasis partially through endothelial-mesenchymal transition.

BACKGROUND: Despite advances in multidisciplinary treatment, the prognosis of pancreatic cancer remains poor. Since distant metastasis defines prognosis, elucidation of the mechanism of metastasis is important for improving survival. Exosomes are extracellular secretory vesicles and are responsible for intercellular communication. In this study, we investigated whether exosomes secreted by human pancreatic cancer cells are involved in promoting distant metastasis of cancer and the mechanism that underlies the promotion of metastasis. METHODS: Exosomes were isolated from ascites of a patient with pancreatic cancer and a patient with liver cirrhosis as a control. Three days after the administration of exosomes to nude mice, GFP-labeled human pancreatic cancer cells were injected via the spleen or tail vein, and then the liver and lungs were histologically analyzed. To elucidate the mechanism, vascular permeability was estimated using FITC-dextran in place of pancreatic cancer cells in vivo and human umbilical vascular endothelial cells (HUVECs) were used to analyze vascular permeability and the induction of endothelial-mesenchymal transition (EndMT) in vitro. RESULTS: Distant metastasis and vascular permeability were significantly enhanced in mice treated with exosomes from pancreatic cancer patients in comparison to exosomes from a control patient in vivo. In addition, exosomes from pancreatic cancer patients significantly enhanced vascular permeability and the induction of EndMT in HUVECs in vitro. CONCLUSION: Exosomes derived from pancreatic cancer cells form a pre-metastatic niche and promote the extravasation and colonization of pancreatic cancer cells to remote organs, partially through endothelial-mesenchymal transition.

Eco-friendly and facile preparation of chitosan-based biofilms of novel acetoacetylated lignin for antioxidant and UV-shielding properties.

The development of eco-friendly, sustainable, biodegradable, and biocompatible green biopolymer composites is becoming increasingly important. In this study, acetoacetylated lignin (ATL) was obtained via an eco-friendly, facile one-step synthesis reaction, and chitosan (CS)-containing ATL films (CSL) were prepared. The chemical structural analysis of ATL confirmed that the acetoacetyl groups were successfully grafted onto kraft lignin (KL). ATL with adequate acetoacetyl groups exhibited enhanced molecular weight and antioxidant and ultraviolet (UV)-shielding properties. In particular, ATL, with a half maximal inhibitory concentration (IC50) of 23.8 µg·mL-1, exhibited superior antioxidant activity than butylated hydroxytoluene (38.3 µg·mL-1) and KL (50.0 µg·mL-1). When ATL was incorporated into the CS solution to prepare biofilms, the antioxidant activity, UV-shielding property, water resistance, and thermal stability of the CSL greatly improved. Notably, the UV-A and UV-B shielding properties of the 2 % CSL were 130 % and 78 % higher than those of the pure CS film, respectively. Therefore, ATL designed with lignin-derived multifunctional properties has potential applications as an antioxidant and UV-shielding bio-additive and shows significant prospects in food packaging and biomedical applications.

Clozapine Blood Concentration Predicts Corrected QT-Interval Prolongation in Patients With Psychoses.

BACKGROUND: Corrected QT-interval (QTc) prolongation (QTP) is a rare but fatal adverse effect of antipsychotics. Clozapine is the only antipsychotic recommended for treatment of resistant schizophrenia; however, clozapine has been reported to cause QTP. We sought factors predictive of QTP in patients who had antipsychotic polypharmacy involving clozapine. We explored whether the clozapine blood concentration might predict QTP. METHODS: We included 133 patients with schizophrenia spectrum disorder who had antipsychotic polypharmacy involving clozapine. We used the χ2 and nonparametric tests to compare clozapine therapeutic drug monitoring (TDM) values and QTc-prolonged person (QTPP) status. Multivariate regression and mediator models were used to identify risk factors for QTPP status and QTP. RESULTS: In total, 111 patients were prescribed clozapine. The QTPP rates were 31.3% (20) for men and 23.2% (16) for women. Compared with the non-QTPP group, the QTPP group exhibited significantly higher daily dose of all antipsychotics including clozapine, a higher clozapine dose, and elevated clozapine and norclozapine TDM values. Furthermore, such patients were prescribed a greater number of antipsychotics. Multivariate logistic regression revealed that only the clozapine TDM value could be predictive factor for QTPP status (P = 0.018). A clozapine TDM value above the therapeutic range (>600 mg/dL) was associated with a high risk of QTPP status (adjusted odds ratio, 6.5; 95% confidence interval, 1.7-25.2; P = 0.006). The mediator model revealed that the clozapine TDM values completely mediated the association between the clozapine dose and the QTc interval. CONCLUSIONS: The clozapine blood concentration reliably predicts QTP in patients with clozapine use.

Utilizing Three-Dimensional Head-Lesser Trochanter Distance Could Further Reduce Leg Length Inequality in Primary Bipolar Hemiarthroplasty.

Background: The aim of this study was to investigate whether the use of three-dimensional (3-D) computed tomography (CT)-based head-lesser trochanter distance (HLD) could reduce leg length discrepancy (LLD) more than the use of a two-dimensional (2-D) plain film method in primary bipolar hemiarthroplasty. Methods: Propensity score matching (PSM) analysis was used to adjust the confounding factors. A retrospective comparative analysis of 128 patients was performed. In the control group, the leg length was equalized using the 2-D, plain film-based HLD. In the study group, primary bipolar hemiarthroplasty was performed using the 3-D CT-based HLD method. Postoperative LLDs were compared between the two groups using the method of Ranawat. In addition, the Harris hip score (HHS) was evaluated and compared at one year after surgery. Results: A significant difference was observed in mean postoperative LLD between the 2-D HLD group and the 3-D CT HLD group: 1.6 ± 1.2 mm (range, 0.1−6.0 mm) and 1.1 ± 1.2 mm (range, 0.1−5.1 mm), respectively (p < 0.05). Additionally, a higher percentage of patients in the 3-D CT HLD group had an LLD of less than 2 mm. The mean HHS at one year after surgery showed no significant difference between the two groups. Conclusions: To minimize the occurrence of LLD, HLD measurement from a CT scanner may be more accurate than an X-ray. The 2-D and 3-D HLD differences in the 3-D CT HLD group were statistically significant. Using a 3-D, CT-based HLD method might decrease the possibility of an LLD over 2 mm.

Circulating microRNA miR-137 as a stable biomarker for methamphetamine abstinence.

OBJECTIVE: Stimulant use instigates abstinence syndrome in humans. miRNAs are a critical component for the pathophysiology of stimulant abstinence. Here we sought to identify a miRNA marker of methamphetamine abstinence in the circulating extracellular vesicles (cEVs). METHODS: miR-137 in the cEVs was quantified by qPCR in thirty-seven patients under methamphetamine abstinence and thirty-five age-matched healthy controls recruited from 2014 to 2016 from the general adult population in a hospital setting, Seoul, South Korea. Diagnostic power was evaluated by area under curve in the receiver-operating characteristics curve and other multiple statistical parameters. RESULTS: Patients under methamphetamine abstinence exhibited a significant reduction in cEV miR-137. Overall, cEV miR-137 had high potential as a blood-based marker of methamphetamine abstinence. cEV miR-137 retained the diagnostic power irrespective of the duration of methamphetamine abstinence or methamphetamine use. Interestingly, cEV miR-137 interacted with age: Control participants displayed an aging-dependent reduction of cEV miR-137, while methamphetamine-abstinent patients showed an aging-dependent increase in cEV miR-137. Accordingly, cEV miR-137 had variable diagnostic power depending on age, in which cEV miR-137 more effectively discriminated methamphetamine abstinence in the younger population. Duration of methamphetamine use or abstinence, cigarette smoking status, depressive disorder, or antidepressant treatment did not interact with the methamphetamine abstinence-induced reduction of cEV miR-137. CONCLUSION: Our data collectively demonstrated that miR-137 in the circulating extracellular vesicles held high potential as a stable and accurate diagnostic marker of methamphetamine abstinence syndrome.

Minimum 10-year follow-up of micro-arc oxidation coating on a cementless grit-blasted tapered-wedge stem of total hip arthroplasty: a multicentre study.

BACKGROUND: Recently, a femoral stem treated with grit-blasting and micro-arc oxidation (MAO) coating has commercialised but medium-term follow-up studies are lacking. The aim of this study was to report the outcome of a grit-blasted and MAO-coated femoral component designed as a straight, double-wedged, tapered stem with a rectangular cross-section with minimum 10 years follow-up. METHODS: Between March 2006 and December 2008, 309 primary total hip arthroplasties using a grit-blasted and MAO-coated femoral component were performed by 3 experienced hip surgeons in 3 hospitals. At minimum 10 years after index THA, 299 hips were living, 10 hips were deceased, and 65 hips were lost to follow-up or had a follow-up period <10 years. Finally, 234 hips were enrolled in this study. RESULTS: Mean duration of clinical follow-up was 129.6 months. The mean Harris Hip Score was improved from 46.9 to 88.4 at the final follow-up. 4 hips were revised for 2 aseptic femoral loosening, 1 aseptic acetabular cup loosening and 1 late infection. 3 hips were revised for a periprosthetic femoral fracture requiring a femoral component revision. The average time to revision was 51.6 (range 0-148) months. Kaplan-Meier survivorship analysis with an end point of revision for any reason demonstrated a survival rate of 97.4% at 10 years. Survival was 98.7% with revision for aseptic loosening as the endpoint. CONCLUSIONS: The outcomes of a cementless grit-blasted and MAO-coated tapered-wedge stem of THA were excellent to satisfactory after a follow-up of at least 10 years.

Improved Biological Responses of Titanium Coating Using Laser-Aided Direct Metal Fabrication on SUS316L Stainless Steel.

Direct metal fabrication (DMF) coatings have the advantage of a more uniform porous structure and superior mechanical properties compared to coatings provided by other methods. We applied pure titanium metal powders to SUS316L stainless steel using laser-aided DMF coating technology with 3D printing. The purpose of this study was to determine the efficacy of this surface modification of stainless steel. The capacity of cells to adhere to DMF-coated SUS316L stainless steel was compared with machined SUS316L stainless steel in vitro and in vivo. Morphological in vitro response to human osteoblast cell lines was evaluated using scanning electron microscopy. Separate specimens were inserted into the medulla of distal femurs of rabbits for in vivo study. The distal femurs were harvested after 3 months, and were then subjected to push-out test and histomorphometrical analyses. The DMF group exhibited a distinct surface chemical composition, showing higher peaks of titanium compared to the machined stainless steel. The surface of the DMF group had a more distinct porous structure, which showed more extensive coverage with lamellipodia from osteoblasts than the machined surface. In the in vivo test, the DMF group showed better results than the machined group in the push-out test (3.39 vs. 1.35 MPa, respectively, p = 0.001). In the histomorphometric analyses, the mean bone-to-implant contact percentage of the DMF group was about 1.5 times greater than that of the machined group (65.4 ± 7.1% vs. 41.9 ± 5.6%, respectively; p < 0.001). The porous titanium coating on SUS316L stainless steel produced using DMF with 3D printing showed better surface characteristics and biomechanical properties than the machined SUS316L.

Biochanin A induces a brown-fat phenotype via improvement of mitochondrial biogenesis and activation of AMPK signaling in murine C3H10T1/2 mesenchymal stem cells.

In this study, we investigated the effect of Biochanin A (BioA), an O-methylated isoflavone on the brown-fat phenotype formation and on the associated thermogenic program including mitochondrial biogenesis and lipolysis in C3H10T1/2 MSCs. Our data demonstrates that Treatment with BioA in an adipogenic differentiation cocktail induced formation of brown-fat-like adipocytes from C3H10T1/2 MSCs without treatment with a known browning inducer (rosiglitazone or T3) at an early stage of differentiation. The formation of brown-fat-like adipocytes by BioA treatment was evidenced by upregulation of key thermogenic markers: Ucp1, Pgc1α, Prdm16, and Pparγ. BioA also increased the expression of beige (Cd137 and Fgf21) and brown (Elovl3 and Zic1)-specific markers. Additionally, BioA treatment promoted mitochondrial biogenesis, judging by the upregulation of genes; Cox8b, Cidea, Dio2, Sirt1, Opa1, and Fis1. BioA treatment increased the amount of mitochondrial DNA and its encoded proteins: oxidative phosphorylation complexes (I-V); this change was associated with high oxygen consumption by C3H10T1/2 MSCs. A small-interfering-RNA-induced gene knockdown and experiments with dorsomorphin-driven competitive inhibition revealed that BioA exerts the thermogenic action via activation of AMPK signaling. Our study shows the mechanism of BioA-induced promotion of a brown-fat phenotype. Nonetheless, clinical research is necessary to validate BioA as a brown-fat-like signature inducer.

Long-Term Results of Total Hip Arthroplasty in Young Patients With Osteonecrosis After Allogeneic Bone Marrow Transplantation for Hematological Disease: A Multicenter, Propensity-Matched Cohort Study With a Mean 11-Year Follow-Up.

BACKGROUND: The number of young patients with hematological disease requiring total hip arthroplasty (THA) is expected to increase. We aimed to investigate the long-term THA outcomes in patients with osteonecrosis of the femoral head (ONFH) following allogeneic bone marrow transplantation (BMT) for hematological disease. METHODS: All patients who underwent THA for osteonecrosis after BMT from 1997 to 2012 were identified at 2 institutions. Using propensity scores, 75 THAs in 45 patients were matched for age, gender, body mass index, American Society of Anesthesiologists score, and year of surgery with 75 THAs in 58 patients with idiopathic ONFH without a history of hematological disease (1:1 ratio). The mean age at surgery was 36.7 years and 52% were men. Clinical and radiographic evaluations were performed and clinical scores were obtained at last follow-up. Kaplan-Meier analyses were used to compare survivorship. RESULTS: At a mean follow-up of 10.6 ± 3.5 years, clinical, radiographic, and survivorship outcomes, and the Harris hip scores were similar between both groups. The 13-year survivorship for all-cause revision was 93.4% for the BMT group and 95% for the control group (P = .928). No significant differences were observed between groups in the rates of reoperation (4% vs 5.3%, P = 1.000), 90-day readmission (all 5.3%), or overall mortality (4.4% vs 1.7%, P = .681). No hips had periprosthetic joint infection or septic loosening in either group. Osteolysis occurred in none of the BMT patients and in 2 hips (2.7%) of the control patients (P = .497). CONCLUSION: This large cohort multicenter survey at 11-year follow-up shows that contemporary cementless THA in young hematological disease patients after allogeneic BMT is not associated with a higher risk for surgical complications, revision, reoperation, readmission, and mortality compared to a matched cohort of idiopathic ONFH.

Comparative analysis of titanium coating on cobalt-chrome alloy in vitro and in vivo direct metal fabrication vs. plasma spraying.

BACKGROUND: Titanium surface coating on cobalt-chromium (CoCr) alloy has characteristics desirable for an orthopedic implant as follows: strength, osteointegrative capability, and biocompatibility. Creating such a coated surface takes a challenging process and two dissimilar metals are not easily welded. In our study, we utilized additive manufacturing with a 3D printing called direct metal fabrication (DMF) and compared it to the plasma spraying method (TPS), to coat titanium onto CoCr alloy. We hypothesized that this would yield a coated surface quality as acceptable or better than the already established method of plasma spraying. For this, we compared characteristics of titanium-coated surfaces created by direct metal fabrication method (DMF) and titanium plasma spraying (TPS), both in vitro and in vivo, for (1) cell morphology, (2) confocal microscopy images of immunofluorescent assay of RUNX2 and fibronectin, (3) quantification of cell proliferation rate, (4) push-out biomechanical test, and (5) bone histomorphometry. METHOD: For in vitro study, human osteoblast cells were seeded onto the coated surfaces. Cellular morphology was observed with a scanning electron microscope. Cellular proliferation was validated with ELISA, immunofluorescent assay. For in vivo study, coated rods were inserted into the distal femur of the rabbit and then harvested. The rods were biomechanically tested with a push-out test and observed for histomorphometry to evaluate the microscopic bone to implant ratio. RESULT: For cell morphology observation, lamellipodia and filopodia, a cytoplasmic projection extending into porous structure, formed on both surfaces created by DMF and TPS. The proliferation of the osteoblasts, the DMF group showed a better result at different optic density levels (p = 0.035, 0.005, 0.001). Expression and distribution of fibronectin and Runx-2 genes showed similar degrees of expressions. The biomechanical push-out test yielded a similar result (p = 0.714). Histomorphometry analysis also showed a similar result (p = 0.657). CONCLUSION: In conclusion, DMF is a method which can reliably create a proper titanium surface on CoCr alloy. The resulting product of the surface shows a similar quality to that of the plasma spraying method, both in vivo and in vitro, in terms of biological and mechanical property.

Mangiferin induces the expression of a thermogenic signature via AMPK signaling during brown-adipocyte differentiation.

Mangiferin (MF) from Mangifera indica has been serendipitously found to ameliorate obesity and is used as an antioxidant, anti-inflammatory, antimicrobial, and anticancer agent. Nonetheless, the mechanism of MF-induced brown-adipose-tissue activation has not been studied. Therefore, we investigated the effect of MF on thermogenic features during brown-adipocyte differentiation. Treatment with MF improved the expression of a brown-fat signature and of mitochondrial-mass-related genes, thus resulting in UCP1 induction. MF also raised the expression of other thermogenic regulators, including peroxisome proliferator-activated receptor gamma coactivator 1 alpha (PGC1α), PR domain-containing protein 16 (PRDM16), and peroxisome proliferator-activated receptors alpha and gamma (PPAR-α and -γ). MF promoted mitochondrial biogenesis, judging by increased expression of cell death-inducing DNA fragmentation factor α-like effector A (CIDEA), mitochondrial transcription factor A (TFAM), iodothyronine deiodinase 2 (DIO2), cytochrome c oxidase subunit 7A (COX7A), cyclooxygenase 2 (COX2), sirtuin 1 (SIRT1), and nuclear respiratory factor 1 (NRF1). MF treatment increased the mitochondrial DNA amount and improved mitochondrial respiratory function by increasing the oxygen consumption rate during brown-adipocyte differentiation. A gene knockdown assay involving small interfering RNA and competitive inhibition with dorsomorphin revealed that MF may promote thermogenesis in brown preadipocytes via activation of AMPK signaling. Collectively, our findings suggest that MF may be a novel pharmaceutical agent that can ameliorate obesity via activation of brown adipose tissue.

PINK1-PRKN mitophagy suppression by mangiferin promotes a brown-fat-phenotype via PKA-p38 MAPK signalling in murine C3H10T1/2 mesenchymal stem cells.

OBJECTIVE: Mangiferin (MF), a xanthonoid derived from Mangifera indica, has shown therapeutic effects on various human diseases including cancer, diabetes, and obesity. Nonetheless, the influence of MF on non-shivering thermogenesis and its underlying mechanism in browning remains unclear. Here, our aim was to investigate the effects of MF on browning and its molecular mechanisms in murine C3H10T1/2 mesenchymal stem cells (MSCs). MATERIALS/METHODS: To determine the function of MF on browning, murine C3H10T1/2 MSCs were treated with MF in an adipogenic differentiation cocktail and the thermogenic and correlated metabolic responses were assessed using MF-mediated signalling. Human adipose-derived MSCs were differentiated and treated with MF to confirm its role in thermogenic induction. RESULTS: MF treatment induced the expression of a brown-fat signature, UCP1, and reduced triglyceride (TG) in C3H10T1/2 MSCs. MF also induced the expression of major thermogenesis regulators: PGC1α, PRDM16, and PPARγ and up-regulated the expression of beiging markers CD137, HSPB7, TBX1, and COX2 in both murine C3H10T1/2 MSCs and human adipose-derived mesenchymal stem cells (hADMSC). We also observed that MF treatment increased the mitochondrial DNA and improved mitochondrial homeostasis by regulating mitofission-fusion plasticity via suppressing PINK1-PRKN-mediated mitophagy. Furthermore, MF treatment improved mitochondrial respiratory function by increasing mitochondrial oxygen consumption and expression of oxidative-phosphorylation (OXPHOS)-related proteins. Chemical-inhibition and gene knockdown experiments revealed that ß3-AR-dependent PKA-p38 MAPK-CREB signalling is crucial for MF-mediated brown-fat formation via suppression of mitophagy in C3H10T1/2 MSCs. CONCLUSIONS: MF promotes the brown adipocyte phenotype by suppressing mitophagy, which is regulated by PKA-p38MAPK-CREB signalling in C3H10T1/2 MSCs. Thus, we propose that MF may be a good browning inducer that can ameliorate obesity.

Electroconvulsive Seizures Induce Autophagy by Activating the AMPK Signaling Pathway in the Rat Frontal Cortex.

BACKGROUND: It is uncertain how electroconvulsive therapy-induced generalized seizures exert their potent therapeutic effects on various neuropsychiatric disorders. Adenosine monophosphate-activated protein kinase (AMPK) plays a major role in maintaining metabolic homeostasis and activates autophagic processes via unc-51-like kinase (ULK1). Evidence supports the involvement of autophagy system in the action mechanisms of antidepressants and antipsychotics. The effect of electroconvulsive therapy on autophagy-related signaling requires further clarification. METHODS: The effect of electroconvulsive seizure on autophagy and its association with the AMPK signaling pathway were investigated in the rat frontal cortex. Electroconvulsive seizure was provided once per day for 10 days (E10X), and compound C or 3-methyadenine was administered through an intracerebroventricular cannula. Molecular changes were analyzed with immunoblot, immunohistochemistry, and transmission electron microscopy analyses. RESULTS: E10X increased p-Thr172-AMPKα immunoreactivity in rat frontal cortex neurons. E10X increased phosphorylation of upstream effectors of AMPK, such as LKB1, CaMKK, and TAK1, and of its substrates, ACC, HMGR, and GABABR2. E10X also increased p-Ser317-ULK1 immunoreactivity. At the same time, LC3-II and ATG5-ATG12 conjugate immunoreactivity increased, indicating activation of autophagy. An intracerebroventricular injection of the AMPK inhibitor compound C attenuated the electroconvulsive seizure-induced increase in ULK1 phosphorylation as well as the protein levels of LC3-II and Atg5-Atg12 conjugate. Transmission electron microscopy clearly showed an increased number of autophagosomes in the rat frontal cortex after E10X, which was reduced by intracerebroventricular treatment with the autophagy inhibitor 3-methyadenine and compound C. CONCLUSIONS: Repeated electroconvulsive seizure treatments activated in vivo autophagy in the rat frontal cortex through the AMPK signaling pathway.

Sinapic acid induces the expression of thermogenic signature genes and lipolysis through activation of PKA/CREB signaling in brown adipocytes.

Lipid accumulation in white adipose tissue is the key contributor to the obesity and orchestrates numerous metabolic health problems such as type 2 diabetes, hypertension, atherosclerosis, and cancer. Nonetheless, the prevention and treatment of obesity are still inadequate. Recently, scientists found that brown adipose tissue (BAT) in adult humans has functions that are diametrically opposite to those of white adipose tissue and that BAT holds promise for a new strategy to counteract obesity. In this study, we evaluated the potential of sinapic acid (SA) to promote the thermogenic program and lipolysis in BAT. SA treatment of brown adipocytes induced the expression of brown-adipocyte activation-related genes such as Ucp1, Pgc-1α, and Prdm16. Furthermore, structural analysis and western blot revealed that SA upregulates protein kinase A (PKA) phosphorylation with competitive inhibition by a pan-PKA inhibitor, H89. SA binds to the adenosine triphosphate (ATP) site on the PKA catalytic subunit where H89 binds specifically. PKA-cat-α1 gene-silencing experiments confirmed that SA activates the thermogenic program via a mechanism involving PKA and cyclic AMP response element-binding protein (CREB) signaling. Moreover, SA treatment promoted lipolysis via a PKA/p38-mediated pathway. Our findings may allow us to open a new avenue of strategies against obesity and need further investigation. [BMB Reports 2020; 53(3): 142-147].

Titanium Powder Coating Using Metal 3D Printing: A Novel Coating Technology for Cobalt-Chromium Alloy Implants.

Background: Three-dimensional (3D) printing with a direct metal fabrication (DMF) technology has been innovatively introduced in the field of surface treatment of prostheses. The purpose of this study was to determine whether such modifications on the surface of cobalt-chromium (CoCr) alloy by titanium powder coating using DMF improves the osseointegration ability of CoCr alloy. Methods: We compared the in vitro and in vivo ability of cells to adhere to DMF-coated CoCr alloy with machining. Biological and morphological responses to human osteoblast cell lines were examined by measuring cell proliferation rate and observing expression of actin filament. For in vivo study, we inserted different specimens in each medulla of the distal femurs of rabbit. After 3 months, the distal femurs were harvested, and a push-out test and histomorphometric analyses were performed. Results: The cell proliferation rate and cell adhesion in the DMF group were higher compared with those in the machined group. Human osteoblast cells on the DMF-coated surface were more strongly adhered and well-proliferated compared with those on the other surface. In the in vivo test, there was a significant difference in the ultimate shear strength between the DMF and machined groups (2.49 MPa vs. 0.87 MPa, respectively, p = 0.001). In the histomorphometric analysis, there was a significant difference in the mean bone-to-implant contact percentages between the DMF and machined groups (72.3 ± 6.2% vs. 47.6 ± 6.9%, respectively, p < 0.001). Conclusion: Titanium coating of CoCr alloy with 3D metal printing provides optimal surface characteristics and a good biological surface both in vitro and in vivo.

Phloroglucinol ameliorates cognitive impairments by reducing the amyloid ß peptide burden and pro-inflammatory cytokines in the hippocampus of 5XFAD mice.

Among the various causative factors involved in the pathogenesis of Alzheimer's disease (AD), oxidative stress has emerged as an important factor. Phloroglucinol is a polyphenol component of phlorotannin, which is found at sufficient levels in Ecklonia cava (E. cava). Phloroglucinol has been reported to exert antioxidant activities in various tissues. Previously, we reported that the stereotaxic injection of phloroglucinol regulated synaptic plasticity in an AD mouse model. In this study, we aimed to investigate the effects of oral administration of phloroglucinol in AD. The oral administration of phloroglucinol for 2 months attenuated the impairments in cognitive function observed in 6-month-old 5X familial AD (5XFAD) mice, as assessed with the T-maze and Y-maze tests. The administration of phloroglucinol for 2 months in 5XFAD mice caused a reduction in the number of amyloid plaques and in the protein level of BACE1, a major amyloid precursor protein cleavage enzyme, together with γ-secretase. Phloroglucinol also restored the reduction in dendritic spine density and the number of mature spines in the hippocampi of 5XFAD mice. In addition, phloroglucinol-administered 5XFAD mice displayed lower protein levels of GFAP and Iba-1 and mRNA levels of TNF-α and IL-6 compared with vehicle-administered 5XFAD mice. These results demonstrated that phloroglucinol alleviated the neuropathological features and behavioral phenotypes in the 5XFAD mouse model. Taken together, our results suggest that phloroglucinol has therapeutic potential for AD treatment.