Spin Trapping Analysis of Radical Intermediates on the Thermo-Oxidative Degradation of Polypropylene.

The purpose of this study is to investigate the thermo-oxidative degradation behavior of polypropylene (PP) by comparing three types of pristine PP granules (consisting of homopolymer, random copolymer, and block copolymer) with their corresponding oxidized analogues. These analogues were intensely oxidized under oxygen at 90 °C for 1000 h by using the electron spin resonance (ESR) spin trapping method that can detect short-lived radical intermediates during the degradation. The degrees of oxidation could be evaluated by chemiluminescence (CL) intensity, which was related to the concentration of hydroperoxide groups generated in the PP chain. In the pristine PP samples, a small amount of hydroperoxides were found to be formed unintentionally, and their homolysis produces alkoxy radicals, RO•, which then undergo ß-scission to yield chain-end aldehydes or chain-end ketones. These oxidation products continue to take part in homolysis to produce their respective carbonyl and carbon radicals. On the other hand, in the oxidized PP granules, because of their much higher hydroperoxide concentration, the two-stage cage reaction and the bimolecular decomposition of hydroperoxides are energetically favorable. Carbonyl compounds are formed in both reactions, which are then homolyzed to form the carbonyl radical species, •C(O)-. PP homopolymer produced the largest amount of carbonyl radical spin adduct; thus, it was found that the homopolymer is most sensitive to oxygen attack, and the presence of ethylene units in copolymers enhances the oxidation resistance of PP copolymers.

Antibacterial Property of Cellulose Acetate Composite Materials Reinforced with Aluminum Nitride.

Cellulose acetate (CA) is a synthetic compound that is derived from the acetylation of cellulose. CA is well known as it has been used for many commercial products such as textiles, plastic films, and cigarette filters. In this research, antibacterial CA composites were produced by addition of aluminum nitride (AlN) at different weight percentage, from 0 wt. % to 20 wt. %. The surface characterization was performed using laser microscope, Raman and FTIR spectroscopy. The mechanical and thermal properties of the composite were analyzed. Although the mechanical strength tended to decrease as the concentration of AlN increased and needed to be optimized, the melting temperature (Tm) and glass transition temperature (Tg) showed a shift toward higher values as the AlN concentration increased leading to an improvement in thermal properties. AlN additions in weight percentages >10 wt. % led to appreciable antibacterial properties against S. epidermidis and E. coli bacteria. Antibacterial CA/AlN composites with higher thermal stability have potential applications as alternative materials for plastic packaging in the food industry.

Chitosan-Functionalized Recycled Polyethylene Terephthalate Nanofibrous Membrane for Sustainable On-Demand Oil-Water Separation.

The preservation of marine ecosystems is one of the most severe challenges at present. In particular, oil-water separation from oil spills and oily wastewater is important. For this reason, a low-cost, effective, and sustainable polymeric solution is in high demand. In this work, a controlled-wettability membrane for selective separation of oil-water mixtures and emulsions is developed. The nanofibrous membrane is prepared via a facile and cost-effective electrospinning technique using environmentally sustainable materials, such as recycled polyethylene terephthalate and chitosan. The effect of different concentrations of chitosan on the morphology, chemical composition, mechanical properties, wettability, and separation performance of the membrane is evaluated. The membranes exhibited underoil superhydrophobic and underwater superoleophobic behavior, which is essential to perform the selective separation. In fact, the designed filter has competitive antifouling properties (oil intrusion pressure > 45 kPa) and showed high heavy- and light-oil/water separation efficiencies (>95%) both for emulsions and immiscible mixtures.

Facile and Scalable Fabrication of Porous Polystyrene Fibers for Oil Removal by Centrifugal Spinning.

The demand for an efficient oil sorbent with high sorption capacity, low cost, scalable fabrication, and high selectivity for the cleanup of spreading oil on water is increasingly urgent due to the frequent occurrence of oil spill accidents in seawater all over the world. In this study, porous polystyrene (PS) fibers with high hydrophobicity and superoleophilicity were directly fabricated by a centrifugal spinning method (CS). The effect of solvents, tetrahydrofuran (THF), and dimethylformamide (DMF) on the morphology and porous structure of the polystyrene fibers was evaluated by using scanning electron microscopy and nitrogen adsorption-desorption experiments. The formation mechanism for the porous structure on the fibers was also evaluated. The oil sorption capacities of the PS fibers for silicon oil, pump oil, and vegetable oil were investigated. The highest oil sorption capacity was found in PS fibers fabricated from PS solution with a THF/DMF weight ratio of 1/3, which exhibited the highest specific surface area, pore volume, and porosity. The high productivity and highly porous structure of PS fibers indicate that CS is a promising method to fabricate porous fibers for the cleanup of oil spills.