Femoral Head Penetration Rates and Oxidation of Highly Cross-Linked Polyethylene Hip Liners Implanted More Than 10 Years.

BACKGROUND: Highly cross-linked polyethylene (HXLPE) was introduced to improve wear in total hip arthroplasty, with manufacturers implementing different thermal treatments to reduce oxidation. It is important to understand how long-term time in vivo affects the wear of these materials. The purpose of this study was to investigate the wear and oxidative performance of first-generation HXLPE hip inserts implanted for greater than 10 years and compare annealed and remelted HXLPE formulations. METHODS: There were 49 total hip arthroplasty liners retrieved during routine revision surgery as part of an institutional review board-approved implant retrieval program. Penetration rates for the liners were calculated as the difference between the thickness of the unloaded and loaded regions divided by implantation time. Oxidation indices for the rim, locking mechanism, articulating surface, and backside regions were measured using Fourier-transform infrared spectroscopy according to American Society for Testing and Materials 2102. Mann-Whitney U tests were used to determine the statistical difference between annealed and remelted components. RESULTS: The cohort had an average implantation time of 13.1 ± 2.6 years for annealed and 12.1 ± 1.7 years for remelted components. The components were revised most often for polyethylene wear, instability, and loosening. The penetration rate averaged 0.0177 ± 0.014 mm/year for annealed components and 0.015 ± 0.022 mm/year for remelted components. Penetration rates did not differ between the remelted and annealed cohorts (P = .28). Oxidation indices were found to be significantly higher in the annealed cohort for all regions of interest (P < .001). CONCLUSIONS: Oxidation was found to be higher in the annealed HXLPE; however, this does not seem to be associated with greater wear as we found the average penetration rates for the cohorts were low, and the penetration rates were similar between the annealed and remelted cohorts.

Evaluating ChatGPT's Capabilities on Orthopedic Training Examinations: An Analysis of New Image Processing Features.

Introduction The efficacy of integrating artificial intelligence (AI) models like ChatGPT into the medical field, specifically orthopedic surgery, has yet to be fully determined. The most recent adaptation of ChatGPT that has yet to be explored is its image analysis capabilities. This study assesses ChatGPT's performance in answering Orthopedic In-Training Examination (OITE) questions, including those that require image analysis. Methods Questions from the 2014, 2015, 2021, and 2022 AAOS OITE were screened for inclusion. All questions without images were entered into ChatGPT 3.5 and 4.0 twice. Questions that necessitated the use of images were only entered into ChatGPT 4.0 twice, as this is the only version of the system that can analyze images. The responses were recorded and compared to AAOS's correct answers, evaluating the AI's accuracy and precision. Results A total of 940 questions were included in the final analysis (457 questions with images and 483 questions without images). ChatGPT 4.0 performed significantly better on questions that did not require image analysis (67.81% vs 47.59%, p<0.001). Discussion While the use of AI in orthopedics is an intriguing possibility, this evaluation demonstrates how, even with the addition of image processing capabilities, ChatGPT still falls short in terms of its accuracy. As AI technology evolves, ongoing research is vital to harness AI's potential effectively, ensuring it complements rather than attempts to replace the nuanced skills of orthopedic surgeons.

Improved patient reported outcomes with the direct anterior approach versus the posterior approach for total hip arthroplasty in the early post-operative period.

BACKGROUND: Patients undergoing total hip arthroplasty (THA) with the direct anterior approach (DAA) may experience faster recovery but may also have better baseline health than those who undergo THA with the posterior approach (PA). This study aimed to compare patient-reported outcome measures (PROMs) between the DAA and PA while controlling for baseline factors. METHODS: This is a secondary data analysis from a prospective cohort study of patients utilizing a smartphone-based care management platform following THA. The primary outcomes were HOOS JR and EQ-5D-5L through 1 year and change from baseline. Longitudinal regression models were created to control for baseline characteristics and investigate the impact of surgical approach on PROMs. RESULTS: Of 1364 THAs evaluated, 731 (53.6%) were female, and 840 (61.6%) used the PA. Patients in the PA group were of similar age but had higher body mass index and comorbidity scores. Pre-operative HOOS JR and EQ-5D-5L were comparable, but higher post-operatively in the DAA group through 6 months (p = 0.03 and p = 0.005). At 1 year post-operatively, HOOS JR and EQ-5D-5L did not vary between groups (p = 0.48 and p = 0.56), nor did changes from baseline (p = 0.47 and p = 0.11). After controlling baseline characteristics, DAA was significantly associated with higher average HOOS JR through 6 months (p = 0.03) and EQ-5D-5L through 3 months (p = 0.005), but not at 12 months (p = 0.89 and p = 0.56). CONCLUSION: THA patients undergoing DAA demonstrate earlier improvements in HOOS JR and EQ-5D-5L. However, these differences may not be clinically significant and are not evident at 1-year post-operative. Patient selection and surgeon training may continue to affect outcomes by surgical approach.

Short-Term Surface Damage Mechanisms of Retrieved Highly Cross-Linked Polyethylene Patellar Components.

BACKGROUND: Previous retrieval studies of patellar components for total knee arthroplasty focused on historical designs and polyethylene materials that are no longer clinically relevant. Therefore, this study aimed to compare revision reasons and surface damage mechanisms of conventional, gamma inert sterilized polyethylene and highly cross-linked polyethylene (HXLPE) patellar components in contemporary designs from a single manufacturer. METHODS: A total of 114 gamma inert and 76 HXLPE patellar components were gathered in a multicenter orthopaedic implant retrieval program. Patient age and body mass index were similar between cohorts (P = .27 and P = .42, respectively); however, the gamma inert cohort was implanted longer (µdifference = 3.1 years; P = .005). A matched subset was created based on the total knee arthroplasty design, patellar shape, and implantation time. Revision reasons were gathered from revision operating notes, and surface damage was examined via the Hood scoring method. Differences between HXLPE and gamma inert cohorts were evaluated using Mann-Whitney U-tests. RESULTS: The most common revision reasons were infection, loosening, and instability, with the most common patellar complication resulting in revision being patellar loosening for both cohorts with similar incidences for both (chi-square; P = .60, P = .59). The most common surface damage modes were burnishing, scratching, and pitting in both cohorts. Total surface damage was significantly higher in the gamma inert components (P = .02), but not in the matched subset (P = .46). CONCLUSION: Overall, the clinical performance of HXLPE was similar to that of conventional polyethylene for patellar components with short implantation times. While this study provides much needed information on the performance of HXLPE patellae in short-term retrievals, long-term studies are still needed.

Patient Satisfaction with Orthopedic Telemedicine Health Visits During the COVID-19 Pandemic.

Background:Telemedicine usage in orthopedic surgery has seen a dramatic increase as a result of the severe acute respiratory syndrome coronavirus 2 pandemic. The purpose of this study was to examine patient perceptions with telemedicine at a large orthopedic practice.Materials and Methods:An anonymous online survey was distributed to all patients who received a telemedicine health visit at our institution for musculoskeletal complaints from March 17 to June 1, 2020. Responses were scored on a 5-point Likert scale (strongly disagree, disagree, neutral, agree, and strongly agree, 1-5) and analyzed by average score and percent reaching top box.Results:A majority of patients (76.5%) were satisfied with their visit, and only 19.2% did not want telemedicine as a future option. Patients who presented for follow-up visits (4.11 vs. 3.94, p = 0.0053; 48% vs. 41%, p = 0.02) and utilized video (4.21 vs. 3.88, p < 0.001; 51% vs. 39%, p < 0.001) were more satisfied. Average satisfaction between older (>65 years) and younger patients was similar (4.06 vs. 4.06, p = 0.97), however, younger patients were more likely to reach top box (42% vs. 51%, p < 0.001). Confidence that the physician came to the correct diagnosis (r = 0.78, p < 0.001) and receiving the same information and care as an in-office visit (r = 0.60, p < 0.001) demonstrated the strongest correlation with satisfaction and desire for future telemedicine visits, respectively. Interestingly, 31.1% of patients would have sought treatment elsewhere had telemedicine not been an option.Conclusions:Overall, satisfaction rates are high for orthopedic patients undergoing telemedicine visits. Patients are more confident in telemedicine when presenting for a follow-up visit and with the use of video.

Success of Various Marketing Strategies for a New-to-the-Area Orthopedic Practice.

Background Competition for patients among orthopaedic private practices, multi-specialty groups, and hospital systems continues to persist. An effective marketing campaign is essential for a practice to succeed in this competitive environment. The purpose of this study was to investigate the cost-effectiveness and efficacy of each marketing campaign and the influence of patient demographics on efficacy. Methods The first 300 consecutive, new patients were prospectively surveyed on how they initially discovered and then selected the orthopaedic practice. Demographics and marketing costs were tabulated and categorized to analyze the effectiveness of each marketing strategy. Results A substantial portion of the marketing budget was allocated for traditional (67.0%) and online advertising (25.0%). However, only 56/300 (18.7%) patients surveyed were brought to the practice by these methods combined. In contrast, expenditure on a marketing liaison (8.0%) delivered 128 patients (42.7%) through referrals: 80 (26.7%) from physicians, 28 (9.3%) from urgent cares, 17 (5.7%) from physical therapists, and 3 (1.0%) from attorneys. Conclusion Marketing strategies were not proportionally beneficial during the first six months of the orthopaedic practice start-up period. During this early ramping up period, the most cost-effective marketing strategy was utilization of a liaison for direct in-person visits to various healthcare facilities.

Distal Femoral Replacement and Periprosthetic Joint Infection After Non-Oncological Reconstruction: A Retrospective Analysis.

BACKGROUND: Distal femoral replacement (DFR) is commonly used to manage massive bone loss around the knee arising from aseptic loosening, periprosthetic joint infection (PJI), and distal femoral fractures. A number of studies report the outcome of DFR with considerable variation in long-term survivorship. This study investigated the outcome of DFR for patients with aseptic failures, fractures, and PJI. METHODS: A retrospective review of 182 patients who underwent DFR for non-oncological indications between 2002 and 2018 was conducted. Data collected included the following: indication, postoperative complications, reoperation, revision, and follow-up. Implant survivorship with Kaplan-Meier curves along with a log-rank test for different preoperative indications was performed. A Cox regression model was used to evaluate the risk of revision. RESULTS: The overall postoperative complication rate was very high at 36%. The most common complication was PJI (17%). The rate of reoperation for any cause was 29.7%, and the revision rate was 13.7%. The most common cause of re-revision was PJI (7.1%). Revision-free survivorship of the DFR implant was 91.6% at 1 year, 87.9% at 2 years, 82.5% at 5 years, and 73.4% at 10 years. Patients who had a prior-PJI had the lowest survivorship compared to patients undergoing DFR for management of periprosthetic fracture and mechanical loosening. Additionally, the prior-PJI group was at a fourfold increased risk of postoperative PJI compared to the aseptic group. CONCLUSION: DFR is a valuable reconstructive option for patients with massive bone loss around the knee. However, patients undergoing DFR are at high risk of complications, reoperations, and failure.

Differences in Patient and Physician Perceptions of Urgency for Musculoskeletal Conditions During the COVID-19 Pandemic.

In 2020, the coronavirus disease 2019 (COVID-19) pandemic limited musculoskeletal care to urgent or "nonelective" office visits and procedures. No guidelines exist to inform patients or physicians what meets these criteria. The purpose of this multi-institutional study was to describe the differences in perceptions of urgency for musculoskeletal complaints between patients and providers during the COVID-19 pandemic. An anonymous survey was distributed to patients who visited the authors' orthopedic clinics in January and February 2020 and practicing orthopedic surgeons. The surveys were administered in May 2020 after COVID-19 was officially labeled a pandemic and included questions regarding demographic information and perceptions of orthopedic urgency. A total of 1491 patients and 128 physicians completed the surveys. A significantly higher percentage of physicians considered the following diagnoses an appropriate indication for an urgent visit compared with patients: fracture (P<.001), acute dislocation (P<.001), infection (P<.001), neurologic compromise (P<.001), tumor (P<.001), acute tendon injury (P<.001), weakness (P<.001), inability to bear weight (P<.001), post-surgical problem (P<.001), and painful joint effusion (P<.001). There were no significant differences in the perception of urgency for the following conditions: bursitis/tendonitis (P=1.00), joint/extremity deformity without pain (P=.113), and loss of range of motion of a joint (P=.467). Younger patients and those with higher levels of education were significantly more likely to consider their conditions urgent. Patients may require additional education to prevent delay in treatment of urgent conditions-especially time-sensitive conditions such as neurologic compromise, tumors, and infections-when access to physicians is limited. [Orthopedics. 2021;44(4):e534-e538.].

Total Hip Arthroplasty in Patients With Avascular Necrosis After Hematopoietic Stem Cell Transplantation.

The immunosuppressive regimens required for hematopoietic stem cell transplantation predispose recipients to complications, including avascular necrosis. Cancer-related comorbidities, immunosuppression, and poor bone quality theoretically increase the risk for perioperative medical complications, infection, and implant-related complications in total joint arthroplasty. This study reviewed 20 primary total hip arthroplasties for avascular necrosis in 14 patients. Outcomes were assessed at routine clinical visits and Harris hip scores were calculated. Follow-up radiographs were evaluated for component malposition, loosening, polyethylene wear, and osteolysis. Average follow-up was 44.5 months for all patients. Postoperative clinical follow-up revealed good to excellent outcomes, with significant improvement in functional outcome scores. There were no periprosthetic infections or revisions for aseptic loosening. There was 1 dislocation on postoperative day 40, which was treated successfully with a closed reduction. Two patients with a prior history of venous thromboembolism developed a pulmonary embolus on postoperative day 13 and 77, respectively. Four patients died several months to years after arthroplasty of complications unrelated to the surgical procedure. Total hip arthroplasty can both be safely performed and greatly improve quality of life in recipients of hematopoietic stem cell transplantation who develop avascular necrosis. However, prolonged venous thromboembolism prophylaxis should be carefully considered in this high-risk patient population. [Orthopedics. 2018; 41(2):e257-e261.].

Fretting and Corrosion Damage in Taper Adapter Sleeves for Ceramic Heads: A Retrieval Study.

BACKGROUND: During revision surgery with a well-fixed stem, a titanium sleeve can be used in conjunction with a ceramic head to achieve better stress distribution across the taper surface. In vitro testing suggests that corrosion is not a concern in sleeved ceramic heads; however, little is known about the in vivo fretting corrosion of the sleeves. The purpose of this study was to investigate fretting corrosion in sleeved ceramic heads in retrieved total hip arthroplasties. METHODS: Thirty-seven sleeved ceramic heads were collected during revision. The femoral heads and sleeves were implanted 0.0-3.3 years. The implants were revised predominantly for instability, infection, and loosening. Fifty percent of the retrievals were implanted during a primary surgery. Fretting corrosion was assessed using the Goldberg-Higgs semiquantitative scoring system. RESULTS: Mild-to-moderate fretting corrosion scores (score = 2-3) were observed in 92% of internal tapers, 19% of external tapers, and 78% of the stems. Severe fretting corrosion was observed in 1 stem trunnion that was previously retained during revision surgery and none of the retrieved sleeves. There was no difference in corrosion damage of sleeves used in primary or revision surgery. CONCLUSION: The fretting corrosion scores in this study were predominantly mild and lower than reported fretting scores of cobalt-chrome heads in metal-on-polyethylene bearings. Although intended for use in revisions, we found that the short-term in vivo corrosion behavior of the sleeves was similar in both primary and revision surgery applications. From an in vivo corrosion perspective, sleeves are a reasonable solution for restoring the stem taper during revision surgery.

Same Day Total Hip Arthroplasty Performed at an Ambulatory Surgical Center: 90-Day Complication Rate on 549 Patients.

BACKGROUND: There is an increasing interest in outpatient total hip arthroplasty (THA), as there are perceived benefits to the patient, insurer, and overall healthcare system. However, the safety of outpatient total joint arthroplasty has not been studied. METHODS: Five hundred forty-nine patients who underwent mini-posterior THA at a freestanding independent ambulatory surgical center (ASC) were reviewed. All patients were discharged to home on the day of surgery. RESULTS: The average age of the patients was 54.4 years (range 27-73). The average American Society of Anesthesiologists score was 1.6 (range 1-3). Of the 549 patients, 3 (0.5%) admitted from the surgery center to our local hospital. One patient was admitted for pain control after failing to disclose his long-term high-dose narcotic dependence, one patient was admitted for an acetabular component migration identified on postoperative x-ray, and one patient was admitted for hypotension, bradycardia, and an acute polyarthralgia exacerbation. An additional patient was seen 2 days after surgery in a local emergency department for oversedation secondary to narcotics and later discharged to home. CONCLUSION: Outpatient THA at an ASC is safe and effective when performed on the appropriately indicated patient. There were 4 visits to the hospital within 2 days of surgery. Only 1 was related to medical events, 2 were pain control and/or medication-related and the final was technique-related. Known orthopedic complications including infection, dislocation, and deep vein thrombosis appear consistent with the literature for a series of this size. Same day discharge THA in an ASC is safe and reproducible.

Is there material loss at the backside taper in modular CoCr acetabular liners?

BACKGROUND: Metal wear and corrosion products generated by hip replacements have been linked to adverse local tissue reactions. Recent investigations of the stem/head taper junction have identified this modular interface as another possible source of metal debris; however, little is known regarding other modular metallic interfaces, their ability to produce metal debris, and possibly to provide insight in the mechanisms that produce metal debris. QUESTIONS/PURPOSES: We asked three questions: (1) can we develop a reliable method to estimate volumetric material loss from the backside taper of modular metal-on-metal liners, (2) do backside tapers of modular metal-on-metal liners show a quantifiable volumetric material loss, and, if so, (3) how do regions of quantitatively identified material loss correspond to visual and microscopic investigations of surface damage? METHODS: Twenty-one cobalt-chromium (CoCr) liners of one design and manufacturer were collected through an institutional review board-approved retrieval program. All liners were collected during revision surgeries, where the primary revision reason was loosening (n=11). A roundness machine measured 144 axial profiles equally spaced about the circumference of the taper region near the rim to estimate volume and depth of material loss. Sensitivity and repeatability analyses were performed. Additionally, visual and scanning electron microscopy investigations were done for three liners. RESULTS: Our measurement method was found to be reproducible. The sensitivity (how dependent measurement results are on experimental parameters) and repeatability (how consistent results are between measurements) analyses confirmed that component alignment had no apparent effect (weak correlation, R2=0.04) on estimated volumetric material loss calculations. Liners were shown to have a quantifiable material loss (maximum=1.7 mm3). Visual investigations of the liner surface could identify pristine surfaces as as-manufactured regions, but could misidentify discoloration as a possible region of material loss. Scanning electron microscopy more accurately distinguished between as-manufactured and damaged regions of the taper. CONCLUSIONS: The roundness machine has been used to develop a repeatable method for characterizing material loss; future work comparing a gravimetric standard with estimations of material loss determined from the roundness machine may show the accuracy and effectiveness of this method. Liners show rates of material loss that compare with those reported for other taper junctions. Visual inspection alone may misidentify as-manufactured regions as regions of material loss. CLINICAL RELEVANCE: This study identifies the acetabular liner/shell interface in modular metal-on-metal devices as a potential source of metal wear or corrosion products. The relation between metal debris and clinical performance, regardless of the type of bearing couple, is a concern for clinicians. Therefore, it is important to characterize every type of modular junction to understand the quantity, location, and mechanism(s) of material loss.

Histological characterization of periprosthetic tissue responses for metal-on-metal hip replacement.

The histology of periprosthetic tissue from metal-on-metal (MOM) hip devices has been characterized using a variety of methods. The purpose of this study was to compare and evaluate the suitability of two previously developed aseptic lymphocyte-dominated vasculitis-associated lesions (ALVAL) scoring systems for periprosthetic hip tissue responses retrieved from MOM total hip replacement (THR) systems revised for loosening. Two ALVAL scoring systems (Campbell and Oxford) were used to perform histological analyses of soft tissues from 17 failed MOM THRs. The predominant reactions for this patient cohort were macrophage infiltration and necrosis, with less than half of the patients (41%) showing a significant lymphocytic response or a high ALVAL reaction (6%). Other morphological changes varied among patients and included hemosiderin accumulation, cartilage formation, and heterotopic ossification. Both scoring systems are useful for correlating macrophage and lymphocyte responses and for comparison with the other; however, given the diversity and variability of the current responses, the Oxford-ALVAL system is more suitable for scoring tissues from MOM THR patients revised for loosening. It is important that standardized methods of scoring MOM tissue responses be used consistently so multiple study results can be compared and a consensus can be generated.

Fracture of the proximal tibia after revision total knee arthroplasty with an extensor mechanism allograft.

Extensor mechanism reconstruction with an extensor mechanism allograft (EMA) remains one of the most reliable methods for treating the extensor mechanism deficient total knee arthroplasty. We report 3 patients who were treated with an EMA who sustained a proximal tibial shaft fracture. In all 3 cases, a short tibial component was present that ended close to the level of the distal extent of the bone block. When performing an EMA, it is important to recognize that the tibial bone block creates a stress riser and revision to a long-stemmed tibial component should be strongly considered to bypass this point to minimize the risk of fracture.

Do dynamic cement-on-cement knee spacers provide better function and activity during two-stage exchange?

BACKGROUND: Implantation of an antibiotic bone cement spacer is used to treat infection of a TKA. Dynamic spacers fashioned with cement-on-cement articulating surfaces potentially facilitate patient mobility and reduce bone loss as compared with their static counterparts, while consisting of a biomaterial not traditionally used for load-bearing articulations. However, their direct impact on patient mobility and wear damage while implanted remains poorly understood. QUESTIONS/PURPOSES: We characterized patient activity, surface damage, and porous structure of dynamic cement-on-cement spacers. METHODS: We collected 22 dynamic and 14 static knee antibiotic cement spacers at revision surgeries at times ranging from 0.5 to 13 months from implantation. For these patients, we obtained demographic data and UCLA activity levels. We characterized surface damage using the Hood damage scoring method and used micro-CT analysis to observe the internal structure, cracking, and porosity of the cement. RESULTS: The average UCLA score was higher for patients with dynamic spacers than for patients with static spacers, with no differences in BMI or age. Burnishing was the only prevalent damage mode on all the bearing surfaces. Micro-CT analysis revealed the internal structure of the spacers was porous and highly inhomogeneous, including heterogeneous dispersion of radiopaque material and cavity defects. The average porosity was 8% (range, 1%-29%) and more than ½ of the spacers had pores greater than 1 mm in diameter. CONCLUSIONS: Our observations suggest dynamic, cement-on-cement spacers allow for increased patient activity without catastrophic failure. Despite the antibiotic loading and internal structural inhomogeneity, burnishing was the only prevalent damage mode that could be consistently classified with no evidence of fracture or delamination. The porous structure of the spacers varied highly across the surfaces without influencing the material failure.

Prosthetic knee infection in the young immigrant patient--do not forget tuberculosis!

Skeletal tuberculosis (TB) frequently masquerades as more common etiologies and can be difficult to diagnose. We describe a case of TB knee arthritis in a young Haitian-born woman in whom the diagnosis was not initially suspected, resulting in treatment with total knee arthroplasty that subsequently failed. A long course of medical and surgical therapies was then necessary to treat this patient. Issues in the diagnosis and management of TB in the native and prosthetic knee joint are presented.

Post damage in contemporary posterior-stabilized tibial inserts: influence of implant design and clinical relevance.

The mechanisms of damage at the polyethylene post in 3 contemporary tibial insert designs were evaluated and compared with a historical standard (Insall-Burstein II; Zimmer, Warsaw, Ind). One hundred five gamma sterilized posterior-stabilized tibial inserts were revised after an average of 4.7 years (0.05-13.6 years). Retrievals were classified according to their designs: Insall-Burstein II (n = 28); PFC (Johnson & Johnson, Raynham, Mass; n = 30); NexGen (Zimmer; n = 32); and Scorpio (Stryker Orthopaedics, Mahwah, NJ; n = 15). Reasons for revision and patient details were available. Surface damage scoring and photogrammetry were performed on all the retrieved tibial inserts. Oxidation analysis was carried out for traceable historical, gamma air-sterilized and conventional, gamma inert-sterilized tibial inserts (n = 61) with the use of infrared spectroscopy. The posts for all 3 contemporary designs exhibited damage similar to the historical controls. Articular, post, and backside damage scores significantly increased with implantation time. Post damage was insensitive to design and patient factors but was exacerbated by oxidation. An association between damage at the post and articular surface was also confirmed. Logistic models suggested an interaction between post damage, backside surface damage, and implant loosening.

In vivo oxidation contributes to delamination but not pitting in polyethylene components for total knee arthroplasty.

The aim of this study was to better understand how in vivo oxidation contributes to fatigue damage in total knee arthroplasty (TKA). A total of 119 tibial inserts were consecutively collected after revision surgery. Of the 119 polyethylene retrievals, 29 were gamma sterilized in air (historical), whereas the remaining 90 were gamma sterilized in nitrogen (conventional). Surface damage assessment and characterization of oxidation were performed on all the retrievals. Delamination was significantly more prevalent and extensive in the longer-term, highly oxidized, historical tibial inserts. Pitting damage, in contrast, seemed to be equally prevalent between both retrieval groups and was not correlated with in vivo oxidation. Our findings support our hypothesis that in vivo oxidation is a contributing factor to delamination, but not pitting, in TKA. Despite the lower oxidation displayed by conventional retrievals, this study provides strong evidence that delamination secondary to in vivo oxidation may occur during the second decade of implantation.

Intraoperative molds to create an articulating spacer for the infected knee arthroplasty.

BACKGROUND: Chronic infections in TKA have been traditionally treated with a two-stage protocol incorporating a temporary antibiotic-loaded cement spacer. The use of a static as opposed to an articulating spacer is controversial. Some surgeons believe a static spacer results in a higher rate of infection eradication, whereas others believe an articulating spacer provides equivalent rates of infection control with improved function between stages and the potential for better eventual range of motion. QUESTIONS/PURPOSES: We determined the rates of infection control and postoperative function for an articulating all-cement antibiotic spacer fashioned intraoperatively from prefabricated silicone molds. METHODS: We retrospectively reviewed 60 patients with an infected TKA using the same cement-on-cement articulating spacer. A minimum of 4 g antibiotic per package of cement was used when making the spacer. Complications and pre- and postoperative knee flexion, extension, and Knee Society scores were recorded. Bone loss associated with the spacer was determined radiographically and by intraoperative inspection of the bony surfaces at the second stage. Minimum followup was 24 months (mean, 35 months; range, 24-51 months). RESULTS: Seven patients (12%) became reinfected, four with an organism different from that identified at the index resection arthroplasty. One spacer femoral component broke between stages but did not require any specific treatment. We identified no bone loss between stages and no complications related to the cement-on-cement articulation. The mean pretreatment Knee Society scores of 53 improved to 79. The mean preoperative flexion of 90.6º improved to 101.3º at final followup. CONCLUSIONS: An articulating antibiotic spacer was associated with control of a deep periprosthetic infection in 88% of patients while allowing range of motion between stages. LEVEL OF EVIDENCE: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Gull-wing osteotomy for the treatment of the deficient patella in revision total knee arthroplasty.

Reconstruction of the deficient patella remains a challenge in revision total knee arthroplasty. Twelve consecutive patients who had a knee revision in which a nonresurfacable patella was treated with a gull-wing patellar osteotomy were followed using a computerized database. Radiographs revealed successful healing of the osteotomy in all patients with central tracking of the patella in the trochlear groove. There was a significant improvement in the range of motion and Knee Society scores. There were no patellar fractures or significant patellar malalignment in this series. This technique has shown promising results for the treatment of the nonresurfacable patella during revision total knee arthroplasty, and we conclude that it is a viable method of patellar salvage reserved for the most advanced cases of patellar bone stock compromise.