Minimally Invasive transCervical oEsophagectomy (MICE) for oesophageal cancer: prospective cohort study (IDEAL stage 2A).

BACKGROUND: Minimally invasive transcervical oesophagectomy is a surgical technique that offers radical oesophagectomy without the need for transthoracic access. The aim of this study was to evaluate the safety and feasibility of the minimally invasive transcervical oesophagectomy procedure and to report the refinement of this technique in a Western cohort. METHODS: A single-centre prospective cohort study was designed as an IDEAL stage 2A study. Patients with oesophageal cancer (cT1b-4a N0-3 M0) who were scheduled for oesophagectomy with curative intent were eligible for inclusion in the study. The main outcome parameter was the postoperative pulmonary complication rate and the secondary outcomes were the anastomotic leakage, recurrent laryngeal nerve palsy, and R0 resection rates, as well as the lymph node yield. RESULTS: In total, 75 patients underwent minimally invasive transcervical oesophagectomy between January 2021 and November 2023. Several modifications to the surgical technique were registered, evaluated, and implemented in the context of IDEAL stage 2A. A total of 12 patients (16%) had postoperative pulmonary complications, including pneumonia (4 patients) and pleural effusion with drainage or aspiration (8 patients). Recurrent laryngeal nerve palsy was observed in 33 of 75 patients (44%), with recovery in 30 of 33 patients (91%). A total of 5 of 75 patients (7%) had anastomotic leakage. The median number of resected lymph nodes was 29 (interquartile range 22-37) and the R0 resection rate was 96% (72 patients). CONCLUSION: Introducing minimally invasive transcervical oesophagectomy for oesophageal cancer in a Dutch institution is associated with a low rate of postoperative pulmonary complications and a high rate of temporary recurrent laryngeal nerve palsy.

Trabecular, but not cortical, bone tissue protein synthesis rates are lower in the femoral head when compared to the proximal femur following an intracapsular hip fracture.

BACKGROUND: All musculoskeletal tissues are in a constant state of turnover, with a dynamic equilibrium between tissue protein synthesis and breakdown rates. The synthesis of protein allows musculoskeletal tissues to heal following injury. Yet, impaired tissue healing is observed following certain injuries, such as geriatric hip fractures. It is assumed that the regenerative properties of femoral head bone tissue are compromised following an intracapsular hip fracture and therefore hip replacement surgery is normally performed. However, the actual impact on in vivo bone protein synthesis rates has never been determined. DESIGN: In the present study, 10 patients (age: 79 ± 10 y, BMI: 24 ± 4 kg/m2) with an acute (<24 h) intracapsular hip fracture received a primed continuous intravenous infusion of L-[ring-13C6]-phenylalanine before and throughout their hip replacement surgery. Trabecular and cortical bone tissue from both the femoral head and proximal femur were sampled during surgery to assess protein synthesis rates of affected (femoral head) and unaffected (proximal femur) bone tissue, respectively. In addition, tissue samples of gluteus maximus muscle, synovium, ligamentum teres, and femoral head cartilage were collected. Tissue-specific protein synthesis rates were assessed by measuring L-[ring-13C6]-phenylalanine incorporation in tissue protein. RESULTS: Femoral head trabecular bone protein synthesis rates (0.056 [0.024-0.086] %/h) were lower when compared to proximal femur trabecular bone protein synthesis rates (0.081 [0.056-0.118] %/h; P = 0.043). Cortical bone protein synthesis rates did not differ between the femoral head and proximal femur (0.041 [0.021-0.078] and 0.045 [0.028-0.073] %/h, respectively; P > 0.05). Skeletal muscle, synovium, ligamentum teres, and femoral head cartilage protein synthesis rates averaged 0.080 [0.048-0.089], 0.093 [0.051-0.130], 0.121 [0.110-0.167], and 0.023 [0.015-0.039] %/h, respectively. CONCLUSION: In contrast to the general assumption that the femoral head is avital after an intracapsular displaced hip fracture in the elderly, our data show that bone protein synthesis is still ongoing in femoral head bone tissue during the early stages following an intracapsular hip fracture in older patients. Nonetheless, trabecular bone protein synthesis rates are lower in the femoral head when compared to the proximal femur in older patients following an acute intracapsular hip fracture. Trial register no: NL9036.

Viability of selected microorganisms in parenteral preparations for novel systemic anti-cancer therapy.

BACKGROUND: Risk factors for aseptic preparation of parenteral medicines encompass the growth-promoting nature of the preparation. Although many aqueous parenteral preparations do not have growth-promoting properties, inadvertently introduced microorganisms may remain viable. Knowledge about the viability of microorganisms in parenteral preparations can add useful information for assigning shelf life to preparations used to treat cancer patients. AIM: The aim of the study was to assess the viability of four different facultative pathogenic microorganisms in 20 ready-to-administer parenteral preparations aseptically prepared in hospital pharmacies. METHODS: Samples of 20 different biologics and small molecules for systemic anti-cancer therapy were inoculated either with different bacteria (i.e., Staphylococcus aureus, Pseudomonas aeruginosa, Enterococcus faecium) or with Candida albicans suspension. The resulting test concentrations were 104-105 microorganisms per mL. Aliquots of inoculated test solutions were transferred in duplicate to tryptic soy agar plates at the time points 0, 4, 24, 48, 144 h. The plates were incubated for 24 h (bacterial strains) and 72 h (C. albicans) at 37 °C and colony forming units (CFUs) were counted. RESULTS: In most test solutions, especially in monoclonal antibody solutions, increased CFU counts of P. aeruginosa and unchanged or increased CFU counts of E. faecium and S. aureus were registered. Pronounced nutritive properties of monoclonal antibodies and filgrastim were not registered. Azacitidine, pixantrone and vinflunine containing test solutions revealed species-specific bacteriostatic and even bactericidal activity. All test solutions, except nivolumab and pixantrone containing solutions, showed constant or increasing CFU counts of C. albicans after incubation. CONCLUSION: Viability of the selected pathogenic microorganisms was retained in most of the tested biological and small molecule preparations used to treat cancer patients. Therefore, in pharmacy departments strict aseptic conditions should be regarded and the lack of antimicrobial activity should be considered when assigning shelf life to RTA parenteral preparations.

A Novel Monoclonal Antibody Degrades the Thyrotropin Receptor Autoantibodies in Graves' Disease.

OBJECTIVE: Autoantibodies against the thyrotropin receptor (TSH-R-Ab) are key mediators for the pathogenesis of Graves' disease (GD). TSH-R-Ab degradation was evaluated using several immunoassays within an exploratory, controlled trial in patients with GD receiving a monoclonal antibody (mAb) targeting the neonatal crystallizable fragment receptor (FcRn). METHODS: Serial measurements of TSH-R-Ab serum levels were performed using 3 different binding and cell-based assays in patients with GD either on medication or on placebo. RESULTS: In contrast to the placebo group, in which no changes were observed, a 12-week mAb therapy led to an early and significant decrease (>60%) in the serum TSH-R-Ab levels in patients with thyroidal and extrathyroidal GD, as unanimously shown in all 3 assays. These marked changes were noted already at week 7 post baseline (P <.0001 for the binding immunoassay and for the luciferase (readout) bioassay). The 3 TSH-R-Ab binding and bioassays were highly correlated in the samples of both study groups (binding immunoassay vs luciferase bioassay, r =.91, P <.001, binding vs cyclic adenosine monophosphate (cAMP) bioassay, r = 0.86, P <.001, and luciferase vs cAMP bioassay, r = 0.71, P =.006). The serological results correlated with the course of the extrathyroidal clinical parameters of GD, that is, clinical activity score and proptosis. CONCLUSION: Targeting the FcRn markedly reduces the disease-specific TSH-R-Ab in patients with GD. The novel and rapid TSH-R-Ab bioassay improves diagnosis and management of patients with GD.

Significant interaction between high-dose methotrexate and high-dose piperacillin-tazobactam causing reversible neurotoxicity and renal failure in an osteosarcoma patient.

INTRODUCTION: Pharmacokinetic interaction of high-dose methotrexate (MTX) and other concomitantly administered renally secreted medicinal products may lead to insufficient methotrexate serum level decrease and significant MTX toxicity. CASE REPORT: We report the case of an 18-year-old male patient treated with high-dose MTX for an osteosarcoma and with high-dose piperacillin-tazobactam at the same time. MTX serum levels were severely elevated 24 hours after the MTX infusion and did not decrease in accordance with the specific calcium folinate rescue protocol. The patient experienced renal failure accompanied by neurological symptoms, most consistent with MTX-related renal and CNS toxicity.Management and outcome: After discontinuation of piperacillin-tazobactam, intensified calcium folinate rescue therapy, and IV hydration, the MTX serum levels decreased appropriately, and toxicity symptoms resolved. DISCUSSION: Severe MTX-related toxicity, caused by drug-drug interaction, suggests that the concomitant use of high-dose MTX and high-dose piperacillin-tazobactam should be avoided generally.

Multi-center observational study on the adherence, quality of life, and adverse events in lung cancer patients treated with tyrosine kinase inhibitors.

INTRODUCTION: Cancer patients tend to prefer oral instead of parenteral chemotherapy. To date, there is little evidence on the medication adherence in cancer patients. We investigated medication adherence to tyrosine kinase inhibitors in patients suffering from non-small cell lung cancer. METHODS: Tyrosine kinase inhibitor adherence was measured electronically by MEMS® (medication event monitoring system) over at least six months. Adherence rates were calculated in terms of Dosing Compliance, Timing Compliance, Taking Compliance, and Drug Holidays. Patients were dichotomized as adherent when Dosing Compliance and Timing Compliance were ≥80%, Taking Compliance ranged between 90 and 110%, and <1 Drug Holiday was registered. Quality of life was assessed by two questionnaires (EORTC QLQ-C30 version 3.0, EORTC QLQ-LC13) at three time points. Adverse drug events were reported via patient diaries. RESULTS: Out of 32 patients enrolled, data from 23 patients were evaluable. Median Dosing Compliance, Taking Compliance, and Timing Compliance adherence rates of tyrosine kinase inhibitor intake amounted to 100%, 98%, and 99%, respectively; Drug Holidays were observed in three patients. Four patients were dichotomized as non-adherent. Three of them had a twice-daily tyrosine kinase inhibitor regimen. Median quality of life scores amounted to 67 (max. 100) and remained unchanged over the study period. Fatigue and rash were the most frequently reported adverse drug events. CONCLUSION: Medication adherence of non-small cell lung cancer patients treated with tyrosine kinase inhibitors was extraordinarily high and is likely to support the effectiveness of tyrosine kinase inhibitor treatment and a good quality of life over a long period of time. Adherence facilitating information and education is especially relevant for patients taking tyrosine kinase inhibitors in a twice-daily regimen.

Formulation and Administration of Biological Medicinal Products".

Monoclonal antibody (Mabs) containing medicinal products are widely used in clinical practice. Prior to parenteral administration, licensed Mab containing medicinal products are transferred to the ready-to-administer (RTA) forms. Reconstitution and/or preparation should follow the guidelines for Good Reconstitution/Good Preparation Practice. Preparation in the pharmacy must take place within the framework of a suitable quality management system. The responsible pharmacist must apply a risk assessment on the process to ensure the appropriate quality of the RTA preparation, especially because the extent of quality testing is limited by batch size (often one single unit) and time restraints. In these cases, appropriate quality is to be assured by means of qualification activities, environmental monitoring, process validation with growth medium and in-process controls. Correct labelling of the Mab containing RTA preparations includes a suitable storage advice and a defined shelf life. Physicochemical stability of a given Mab preparation can be assessed based on a specific stability study (supplied by the manufacturer in the SmPC or scientific journals, study published by an expert in a peer-reviewed scientific journal). Physicochemical stability studies require the use of various orthogonal physicochemical methods to detect accurately the degradation changes that may result from the deamidation, oxidation, disulfide formation, aggregation or fragmentation during storage. Complementary, biological activity can be measured. Compatibility studies of Mabs and devices used for preparation and administration are still scarce. Microbiological stability of Mab preparations is related to the complexity of the preparation process, the growth supporting nature of the preparation and the integrity of the container or container/closure combination. In use viability tests revealed that the potential of Mab preparations to support microbial growth was similar to that of the pure vehicle solutions used as control solutions. The enumerated microbial counts varied according to the species utilized and the type of Mab preparation. If sterility testing of the individual preparation is impossible, maximum permitted shelf life can be assessed empirically with regard to the maximum shelf lives defined in the USP <797> monograph. Finally, microbiological and physicochemical stability are to be considered concurrently when determining the shelf life of an individual Mab preparation. In each case, shelf life should be limited according to the shorter period of proven stability, either derived from the microbiological or physicochemical stability data.

Efficacy of four cleaning solutions for the decontamination of selected cytotoxic drugs on the different surfaces of an automated compounding system.

The automated aseptic preparation of ready-to-administer antineoplastic drug solutions with robotic systems reduces the risk of occupational exposure. However, the surfaces in the preparation area of the robot are to be cleaned by wiping with an appropriate cleaning solution. The aim of the study was to evaluate the cleaning efficacy of four cleaning solutions on four surface materials installed in the APOTECAchemo robot. Predefined amounts of cisplatin (Cis), 5-fluorouracil (5-FU), and cyclophosphamide (CP) were intentionally spread on test plates made of stainless steel, aluminium, polyoxymethylene, and polycarbonate just as installed in the robotic system APOTECAchemo. After drying, the plates were cleaned with 0.2% ethanolic NaOH, 0.23% isopropanolic sodium dodecylsulfate (SDS-2P), 0.5% sodium hypochlorite (NaOCl), and 0.1% benzalkonium chloride (BZK) solutions following a standardized wiping protocol. Residual contamination was recovered with wipe tests, Pt was quantified by voltammetry, and 5-FU and CP was quantified by gas chromatography-tandem mass spectrometry (GC-MSMS). The mean residual contamination after cleaning and the cleaning efficacy (CE) rates were calculated and aggregated on different levels. The CE rates varied between 81.5% and 100% and lay in the majority of cases above 90%. The lowest CE rates were registered for Pt contamination. Especially on aluminium surfaces the residual contamination was high. The overall CE rates of the three different drugs and four different surface types amounted to 98.3% for NaOCl, 97.9% for SDS-2P, 96.9% for ethanolic NaOH, and 96.5% for BZK. The tested cleaning solutions proved to be higher than 90% in most cases, but none of them was able to eliminate 100% of the intentional surface contamination of three antineoplastic drugs on the test plates. The cleaning efficacy varied according to the different surface types and antineoplastic drug. Results could be used in the daily clinical practice to develop and implement effective cleaning procedures.

One Week of Hospitalization Following Elective Hip Surgery Induces Substantial Muscle Atrophy in Older Patients.

OBJECTIVES: Short successive periods of skeletal muscle disuse have been suggested to substantially contribute to the observed loss of skeletal muscle mass over the life span. Hospitalization of older individuals due to acute illness, injury, or major surgery generally results in a mean hospital stay of 5 to 7 days, during which the level of physical activity is strongly reduced. We hypothesized that hospitalization following elective total hip arthroplasty is accompanied by substantial leg muscle atrophy in older men and women. DESIGN AND PARTICIPANTS: Twenty-six older patients (75 ± 1 years) undergoing elective total hip arthroplasty participated in this observational study. MEASUREMENTS: On hospital admission and on the day of discharge, computed tomographic (CT) scans were performed to assess muscle cross-sectional area (CSA) of both legs. During surgery and on the day of hospital discharge, a skeletal muscle biopsy was taken from the m. vastus lateralis of the operated leg to assess muscle fiber type-specific CSA. RESULTS: An average of 5.6 ± 0.3 days of hospitalization resulted in a significant decline in quadriceps (-3.4% ± 1.0%) and thigh muscle CSA (-4.2% ± 1.1%) in the nonoperated leg (P < .05). Edema resulted in a 10.3% ± 1.7% increase in leg CSA in the operated leg (P < .05). At hospital admission, muscle fiber CSA was smaller in the type II vs type I fibers (3326 ± 253 µm2 vs 4075 ± 279 µm2, respectively; P < .05). During hospitalization, type I and II muscle fiber CSA tended to increase, likely due to edema in the operated leg (P = .10). CONCLUSIONS: Six days of hospitalization following elective total hip arthroplasty leads to substantial leg muscle atrophy in older patients. Effective intervention strategies are warranted to prevent the loss of muscle mass induced by short periods of muscle disuse during hospitalization.

Physicochemical stability of carfilzomib (Kyprolis®) containing solutions in glass vials, ready-to-administer plastic syringes and infusion bags over a 28-day storage period.

Centralized aseptic preparation of ready-to-administer carfilzomib containing parenteral solutions in plastic syringes and polyolefine (PO) infusion bags needs profound knowledge about the physicochemical stability in order to determine the beyond-use-date of the preparations. Therefore, the purpose of this study was to determine the physicochemical stability of carfilzomib solution marketed as Kyprolis® powder for solution for infusion. Reconstituted solutions and ready-to-administer preparations of Kyprolis® stored under refrigeration (2-8℃) or at room temperature (25℃) were analyzed at predetermined intervals over a maximum storage period of 28 days. Chemical stability of carfilzomib was planned to be determined with a stability-indicating reversed-phase high-performance liquid chromatography assay. Physicochemical stability was planned to be determined by visual inspection of clarity and color as well as pH measurement. The study results show that reconstituted carfilzomib containing parenteral solutions are stable in glass vials as well as diluted solutions in plastic syringes and PO infusion bags over a period of at least 28 days when stored light protected under refrigeration. When stored at room temperature, reconstituted and diluted carfilzomib solutions are physicochemically stable over 14 days and 10 days, respectively. The physicochemical stability of carfilzomib infusion solutions allows cost-saving pharmacy-based centralized preparation of ready-to-administer preparations.

Extensive Type II Muscle Fiber Atrophy in Elderly Female Hip Fracture Patients.

BACKGROUND: Sarcopenia, or the loss of muscle mass and strength, is known to increase the risk for falls and (hip) fractures in older people. The objective of this study was to assess the skeletal muscle fiber characteristics in elderly female hip fracture patients. METHOD: Percutaneous needle biopsies were collected from the vastus lateralis muscle in 15 healthy young women (20 ± 0.4 years), 15 healthy elderly women (79 ± 1.7 years), and 15 elderly women with a fall-related hip fracture (82 ± 1.5 years). Immunohistochemical analyses were performed to assess Type I and Type II muscle fiber size, and myonuclear and satellite cell content. RESULTS: Type II muscle fiber size was significantly different between all groups (p < .05), with smaller Type II muscle fibers in the hip fracture patients (2,609 ± 185 µm2) compared with healthy elderly group (3,723 ± 322 µm2) and the largest Type II muscle fibers in the healthy young group (4,755 ± 335 µm2). Furthermore, Type I muscle fiber size was significantly lower in the hip fracture patients (4,684 ± 211 µm2) compared with the healthy elderly group (5,842 ± 316 µm2, p = .02). The number of myonuclei per Type II muscle fiber was significantly lower in the healthy elderly and hip fracture group compared with the healthy young group (p = .011 and p = .002, respectively). Muscle fiber satellite cell content did not differ between groups. CONCLUSION: Elderly female hip fracture patients show extensive Type II muscle fiber atrophy when compared with healthy young or age-matched healthy elderly controls. Type II muscle fiber atrophy is an important hallmark of sarcopenia and may predispose to falls and (hip) fractures in the older population.

Compatibility of irinotecan-loaded DC Bead with different volumes and types of non-ionic contrast media.

OBJECTIVES: Irinotecan-loaded microspheres are used for simultaneous embolisation and chemotherapy of liver metastases of colorectal carcinoma. The aim of the study was to evaluate the compatibility of recently introduced DC BeadM1 (bead size 70-150 µm) loaded with irinotecan after admixture with different types and volumes of non-ionic contrast media over a maximum period of 24 h and storage at room temperature. METHODS: Test suspensions were prepared by loading 2 mL DC BeadM1 with 100 mg irinotecan within 2 h. The loading efficiency was determined by measuring the concentrations of irinotecan in the excess solutions via a reversed phase high pressure liquid chromatography (RP-HPLC) assay with ultraviolet detection. The compatibility of irinotecan-loaded DC BeadM1 with different types and volumes of contrast media was studied by mixing 2 mL loaded bead slurry each with up to four different volumes (5, 10, 20, 30 mL) of seven different contrast media. Samples were withdrawn after 30 min, 1, 2, 4, 8 and 24 h. Admixtures were stored light protected at room temperature over the observation period. The concentrations of eluted irinotecan were measured in triplicate samples using the RP-HPLC assay. RESULTS: Mixing of irinotecan loaded beads with non-ionic contrast media decreased the irinotecan loading efficiency between minimum 2.5% and maximum 17% over the observation period of 24 h. The rate and amount of irinotecan eluted from the beads varied relying on the type and volume of contrast medium admixed. However, no further elution or degradation was observed after the rapid release during the first 8 h. CONCLUSIONS: Because of the rapid and extensive release of irinotecan, it is not recommendable to prepare admixtures of irinotecan-loaded DC BeadM1 with contrast media in centralised cytotoxic preparation units in advance. Admixture should be performed with the smallest possible amount by the radiologists immediately prior to the delivery procedure.

Loading, release and stability of epirubicin-loaded drug-eluting beads.

PURPOSE: The aim of this study was to determine the loading efficiency, physico-chemical stability and release of epirubicin-loaded DC Bead™ (Biocompatibles UK Ltd, a BTG International group company) (bead size 70-150 µm (=DC BeadM1™) and 100-300 µm) after loading with epirubicin solution (2 mg/ml) or reconstituted powder formulation (25 mg/ml) and controlled storage. METHODS: DC Bead™ were loaded with 76 mg epirubicin solution (Epimedac™, Medac GmbH) or 75 mg epirubicin powder formulation (Farmorubicin™, Pharmacia Pfizer GmbH) per 2 ml of beads. Drug loading efficiency and stability were determined by measuring the epirubicin concentration in the excess solution after predetermined intervals (maximum 24 h) and different agitation conditions.Syringes with loaded beads were stored protected from light at room temperature. At predetermined intervals the beads were transferred into 200 ml phosphate buffered solution (pH 7.2) as elution medium and stirred automatically for 2 h not followed or followed by addition of 200 ml of 20% sodium chloride (=NaCl) solution and stirred for another 2 h to analyse the drug release and integrity of the epirubicin-loaded beads. Elution experiments were performed and samples taken periodically over a four-week period (day 0, 7, 14 and 28). A reversed-phase high-performance liquid chromatography assay with ultraviolet detection was utilized to analyse the concentration and purity of epirubicin. RESULTS: The loading procedure for DC Bead™ with epirubicin drug solutions resulted in a loading percentage of 95-99% within 6 h dependent on the bead size, epirubicin concentration in the loading solution and loading conditions. Loading levels remained stable and no epirubicin degradation products were observed over the period of 28 days, while the loaded beads were stored light protected at room temperature.Release of epirubicin into 200 ml phosphate buffered solution elution medium and additionally followed by release into the admixture with 200 ml 20% NaCl solution amounted to 5% and about 20% of the loaded epirubicin, respectively. Integrity of loaded epirubicin was proven over 28 days. CONCLUSIONS: Epirubicin can be loaded into DC Bead™ of different sizes using the epirubicin powder formulation (25 mg/ml) or epirubicin injection concentrate (2 mg/ml). Physico-chemical stability is maintained over a period of at least 28 days when stored light protected at room temperature. Elution of epirubicin is dependent on the volume and cation exchange capacity of the elution medium.

Compatibility of epirubicin-loaded DC bead™ with different non-ionic contrast media.

PURPOSE: The aim of this study was to determine the compatibility of epirubicin-loaded DC bead™ with different non-ionic contrast media over a period of seven days when stored light protected under refrigerated conditions. METHODS: DC bead™ (2 ml) (Biocompatibles UK Ltd) of the bead size 70-150 µm ( = DC bead M1) or bead size 100-300 µm were loaded with 75 mg epirubicin powder formulation (Farmorubicin® dissolved in 3 ml water for injection to a concentration of 25 mg/ml) or 76 mg epirubicin injection solution (Epimedac® 2 mg/ml) within 2 h or 6 h, respectively. After removal of the excess solution, the epirubicin-loaded beads were mixed in polypropylene syringes with an equal volume (∼1.5 ml) of contrast media, i.e. Accupaque™ 300 (Nycomed Inc.), Imeron® 300 (Bracco S.p.A), Ultravist® 300 (Bayer Pharma AG), Visipaque™ 320 (GE Healthcare) and agitated in a controlled manner to get a homogenous suspension. Syringes with loaded beads in contrast media were stored protected from light under refrigeration (2-8℃). Compatibility was determined by measuring epirubicin concentrations in the suspensions in triplicate on day 0, 1, and 7. A reversed phase high-performance liquid chromatography assay with ultraviolet detection was utilized to analyze the concentration and purity of epirubicin. RESULTS: Mixing of epirubicin-loaded beads with different non-ionic contrast media released 0.1-0.5% of epirubicin over a period of 24 h, irrespectively, of the DC bead™ size or type of contrast media. No further elution or degradation was observed after seven days when the admixtures were stored protected from light under refrigeration. CONCLUSION: Compatibility of epirubicin-loaded DC bead™ with an equal volume of different contrast media in polypropylene syringes is given over a period of seven days. Due to a maximum elution of 0.1-0.5% of epirubicin from loaded DC bead™, admixtures with contrast media can be prepared in advance in centralized cytotoxic preparation units. Microbiological aspects have to be considered when determining the expiration date of the product.

Media-fill simulation tests in manual and robotic aseptic preparation of injection solutions in syringes.

OBJECTIVE: The purpose of this study was to evaluate the contamination rate of media-fill products either prepared automated with a robotic system (APOTECAchemo™) or prepared manually at cytotoxic workbenches in the same cleanroom environment and by experienced operators. Media fills were completed by microbiological environmental control in the critical zones and used to validate the cleaning and disinfection procedures of the robotic system. METHODS: The aseptic preparation of patient individual ready-to-use injection solutions was simulated by using double concentrated tryptic soy broth as growth medium, water for injection and plastic syringes as primary packaging materials. Media fills were either prepared automated (500 units) in the robot or manually (500 units) in cytotoxic workbenches in the same cleanroom over a period of 18 working days. The test solutions were incubated at room temperature (22℃) over 4 weeks. Products were visually inspected for turbidity after a 2-week and 4-week period. Following incubation, growth promotion tests were performed with Staphylococcus epidermidis. During the media-fill procedures, passive air monitoring was performed with settle plates and surface monitoring with contact plates on predefined locations as well as fingerprints. The plates got incubated for 5-7 days at room temperature, followed by 2-3 days at 30-35℃ and the colony forming units (cfu) counted after both periods. The robot was cleaned and disinfected according to the established standard operating procedure on two working days prior to the media-fill session, while on six other working days only six critical components were sanitized at the end of the media-fill sessions. Every day UV irradiation was operated for 4 h after finishing work. RESULTS: None of the 1000 media-fill products prepared in the two different settings showed turbidity after the incubation period thereby indicating no contamination with microorganisms. All products remained uniform, clear, and light-amber solutions. In addition, the reliability of the nutrient medium and the process was demonstrated by positive growth promotion tests with S. epidermidis. During automated preparation the recommended limits < 1 cfu per settle/contact plate set for cleanroom Grade A zones were not succeeded in the carousel and working area, but in the loading area of the robot. During manual preparation, the number of cfus detected on settle/contact plates inside the workbenches lay far below the limits. The number of cfus detected on fingertips succeeded several times the limit during manual preparation but not during automated preparation. There was no difference in the microbial contamination rate depending on the extent of cleaning and disinfection of the robot. CONCLUSION: Extensive media-fill tests simulating manual and automated preparation of ready-to-use cytotoxic injection solutions revealed the same level of sterility for both procedures. The results of supplemental environmental controls confirmed that the aseptic procedures are well controlled. As there was no difference in the microbial contamination rates of the media preparations depending on the extent of cleaning and disinfection of the robot, the results were used to adapt the respective standard operating procedures.

Physico-chemical stability of eribulin mesylate containing concentrate and ready-to-administer solutions.

OBJECTIVES: The aim of this study was to determine the stability of commercially available eribulin mesylate containing injection solution as well as diluted ready-to-administer solutions stored under refrigeration or at room temperature. METHODS: Stability was studied by a novel developed stability-indicating reversed-phase high-performance liquid chromatography (RP-HPLC) assay with ultraviolet detection (detection wavelength 200 nm). Triplicate test solutions of eribulin mesylate containing injection concentrate (0.5 mg/mL) and with 0.9% sodium chloride solution diluted ready-to-administer preparations (0.205 mg/mL eribulin mesylate in polypropylene (PP) syringes, 0.020 mg/mL eribulin mesylate in polypropylene/polyethylene (PE) bags) were stored protected from light either at room temperature (25) or under refrigeration (2-8). Samples were withdrawn on day 0 (initial), 1, 3, 5, 7, 14, 21 and 28 of storage and assayed. Physical stability was determined by measuring the pH value once a week and checking for visible precipitations or colour changes. RESULTS: The stability tests revealed that concentrations of eribulin mesylate remained unchanged over a period of 28 days irrespective of concentration, container material or storage temperature. Neither colour changes nor visible particles have been observed. The pH value varied slightly over time but remained in the stability favourable range of 5-9. CONCLUSION: Eribulin mesylate injection (0.5 mg/mL) is physico-chemically stable over a period of 28 days after first puncture of the vial. After dilution with 0.9% NaCl vehicle solution, ready-to-administer eribulin mesylate injection solutions (0.205 mg/mL in PP syringe) and infusion solutions (0.02 mg/mL in prefilled PP/PE bags) are physico-chemically stable for a period of at least four weeks either refrigerated or stored at room temperature. For microbiological reasons storage under refrigeration is recommended.

Inhalation solutions--which ones may be mixed? Physico-chemical compatibility of drug solutions in nebulizers--update 2013.

Many patients suffering from chronic respiratory diseases rely on inhalation therapy with nebulizers. About 25% of patients who need to inhale several different drugs per day save time by mixing them for simultaneous inhalation. This review presents a comprehensive overview of the available data concerning physico-chemical compatibility of commonly mixed nebulizer solutions and suspensions. Information is based on our in vitro studies and a thorough literature search. Results indicate that many nebulizer solutions/suspensions are mixable without provoking incompatibilities. However, certain excipients contained in some of the tested drug products could be identified as a reason for incompatibilities, e.g. impaired activity of dornase alfa. Studies assessing the aerosol characteristics of compatible mixtures nebulized with commonly used nebulizers are limited and should be encouraged. The clinical efficacy of simultaneous inhalation of duplicate, tripartite or quadripartite mixtures must be evaluated in clinical studies before final recommendations for the inhalation regimens can be made.

Long-term stability study of clofarabine injection concentrate and diluted clofarabine infusion solutions.

PURPOSE: The aim of this study was to investigate the physicochemical stability of clofarabine (CAFdA) injection concentrate and ready-to-use CAFdA infusion solutions over a prolonged period of 28 days. METHODS: To determine the stability of CAFdA infusion solutions, the injection concentrate (Evoltra®, 1 mg/mL, Genzyme) was diluted either with 0.9% sodium chloride or 5% glucose infusion solution. The resulting concentrations of 0.2 mg/mL or 0.6 mg/mL, respectively, were chosen to represent the lower and upper limit of the ordinary concentration range. Test solutions were stored under refrigeration (2-8°C) or at room temperature either light protected or exposed to light. CAFdA concentrations and pH values were determined at different time intervals throughout a 28-day storage period. Compatibility of diluted CAFdA infusion solutions (0.1-0.4 mg/mL) with different container materials (polyvinyl chloride (PVC), glass, and polypropylene/polyethylene (PP/PE)) was tested over a 48-h storage period. CAFdA concentrations were measured by a stability-indicating reversed phase high-performance liquid chromatography (HPLC) assay with ultraviolet detection. RESULTS: CAFdA injection concentrate and CAFdA infusion solutions remained physicochemically stable (>90% CAFdA) for 4 weeks. Results are independent of storage conditions, drug concentrations (0.2, 0.6, and 1.0 mg/mL) and diluents (0.9% sodium chloride, 5% glucose infusion solution). Adsorption of CAFdA to container material can be excluded. CONCLUSIONS: CAFdA injection concentrate and diluted infusion solutions in commonly used vehicles are stable for at least 28 days either refrigerated or at room temperature. Physicochemical stability favors pharmacy-based centralized preparation. Due to microbiological reasons, strict aseptic handling and storage of the products under refrigeration is recommended.

Loading profile of topotecan into polyvinyl alcohol microspheres (DC Bead™) over a 7-day period.

PURPOSE: DC Bead™ is successfully used for chemoembolization of various liver cancers. The purpose of this study was to determine the loading capacity of the semi-synthetic topoisomerase-1 inhibitor topotecan into the DC Bead™ microspheres under static or agitated conditions and to assess the physicochemical stability over a period of 7 days. METHODS: Commercially available topotecan hydrochloride powder (Hycamtin®) was reconstituted with water for injection to yield a nominal concentration of 1 mg/mL topotecan. Polyvinyl alcohol (PVA)-based microspheres (DC Bead™, 300-500 µm, 2 mL/vial) were mixed with 4 mL of the reconstituted topotecan solution. Vials were stored light protected at room temperature under static or agitated conditions for 7 days (n = 3, for each loading condition). At different time intervals, samples were taken from the excess solution and assayed via a stability-indicating HPLC assay. Drug-loading profiles were determined by measuring the remaining topotecan concentration in the excess solution. RESULTS: Under agitated conditions, topotecan was loaded into the microspheres rapidly after mixing. After 5 min 86.4 ± 0.1% of topotecan was loaded. Under static conditions, drug uptake was slower. Only 65.0 ± 0% were loaded after 5 min; 86.6 ± 0.1% drug uptake was achieved not until 1 h. Over a storage period of 7 days, topotecan remained loaded in the DC Bead™ microspheres at a level of >90%. CONCLUSION: Drug uptake of 4 mg topotecan (1 mg/mL solution) into DC Beads™ was faster under agitated loading conditions. Nevertheless, after 1 h, ∼90% of topotecan was loaded into the DC Bead™ microspheres independent from the type of loading condition. The loading rate remained >90% over the observation period of 7 days and light-protected storage at room temperature. Loading and stability of topotecan-loaded DC Beads™ is suitable and convenient for preparation in a pharmacy-based cytotoxic preparation unit.

Assessing the risk to health care staff from long-term exposure to anticancer drugs--the case of monoclonal antibodies.

Today the occupational health and safety risk involved when handling most anticancer drugs is well recognized and, as a result of regulatory requirements, safety measures have been established. There is little knowledge about the occupational hazard posed by handling monoclonal antibodies assigned to ATC Class L01XC. The aim of our study was to evaluate the occupational risk of monoclonal antibodies. Using the information obtained in a systematic review of the literature, the potentially dangerous properties of the active drug substances were assessed using a specially devised algorithm. As a result, all monoclonal antibodies in question were categorized as substances with developmental toxicity. In addition, gemtuzumab ozogamicin was categorized as mutagenic. In view of the high molecular weights and the proteinogenic nature of monoclonal antibodies, the route of exposure for health care staff is limited to inhalation, unless there is an accident. Employers should implement the necessary administrative and engineering controls. Employees should adhere to the standards in order to avoid occupational exposure. The hazard assessment algorithm devised and the evaluation procedure may also be used for other drugs considered to be dangerous.