[Fibromatous Epulis: A Clinical Case Report].

A 35-year-old patient presented with a painless, broad-based exophytic lesion in the buccal interdental region between teeth 13 and 14. Despite oral hygiene efforts the lesion persisted for around one year. Radiology excluded bone involvement, and histopathology after excision confirmed a fibromatous epulis, which is characterized by collagen-rich connective tissue. There was no recurrence within one-year follow-up. Surgical removal proved to be efficient.

OrthoCalc: The six degrees of freedom measurement workflow of rotational and displacement changes for maxilla positioning evaluation.

BACKGROUND: This study is undertaken to establish the accuracy and reliability of OrthoCalc, a 3D application designed for the evaluation of maxillary positioning. METHODS: We registered target virtual planned models, maxillary models from pre-operative and post-operative CT scans, and post-operative intra-oral scans to a common reference system, allowing for digital evaluation. To assess rotational changes, we introduced a novel measurement method based on virtual cuboid models. Displacement errors were calculated based on proposed registration matrices. We also compared OrthoCalc to established commercial medical software as a benchmark. RESULTS: Statistical significance calculated showed no significant differences between OrthoCalc and commercial software. the biggest error of 0.04 degree in rotation change was found in the yaw. A maximum displacement change of 0.75 mm was found in the X direction. CONCLUSIONS: Our study validates OrthoCalc as a precise and reliable tool for assessing maxillary position changes with six degrees of freedom in orthognathic surgery, endorsing its clinical utility.

Biomechanical feasibility of non-locking system in patient-specific mandibular reconstruction using fibular free flaps.

Mandibular reconstruction with free fibular flaps is frequently used to restore segmental defects. The osteosythesis, including locking and non-locking plate/screw systems, is essential to the mandibular reconstruction. Compared with the non-locking system that requires good adaption between plate and bone, the locking system appears to present a better performance by locking the plate to fixation screws. However, it also brings about limitations on screw options, a higher risk of screw failure, and difficulties in screw placement. Furthermore, its superiority is undermined by the advancing of patient-specific implant design and additive manufacturing. A customized plate can be designed and fabricated to accurately match the mandibular contour for patient-specific mandibular reconstruction. Consequently, the non-locking system seems more practicable with such personalized plates, and its biomechanical feasibility ought to be estimated. Finite element analyses of mandibular reconstruction assemblies were conducted for four most common segmental mandibular reconstructions regarding locking and non-locking systems under incisal biting and right molars clenching, during which the influencing factor of muscles' capacity was introduced to simulate the practical loadings after mandibular resection and reconstruction surgeries. Much higher, somewhat lower, and similar maximum von Mises stresses are separately manifested by the patient-specific mandibular reconstruction plate (PSMRP), fixation screws, and reconstructed mandible with the non-locking system than those with the locking system. Equivalent maximum displacements are identified between PSMRPs, fixation screws, and reconstructed mandibles with the non-locking and locking system in all four reconstruction types during two masticatory tasks. Parallel maximum and minimum principal strain distributions are shared by the reconstructed mandibles with the non-locking and locking system in four mandibular reconstructions during both occlusions. Conclusively, it is feasible to use the non-locking system in case of patient-specific mandibular reconstruction with fibular free flaps based on the adequate safety, comparable stability, and analogous mechanobiology it presents compared with the locking system in a more manufacturable and economical way.

Preclinical study of additive manufactured plates with shortened lengths for complete mandible reconstruction: Design, biomechanics simulation, and fixation stability assessment.

BACKGROUND: A combination of short titanium plates fabricated using additive manufacturing (AM) provides multiple advantages for complete mandible reconstruction, such as the minimisation of inherent implant deformation formed during AM and the resulting clinical impact, as well as greater flexibility for surgical operation. However, the biomechanical feasibility of this strategy is still unclear, and therefore needs to be explored. METHOD: Three different combinations of short mandible reconstruction plates (MRPs) were customised considering implant deformation during the AM process. The resulting biomechanical performance was analysed by finite element analysis (FEA) and compared to a conventional single long MRP. RESULTS: The combination of a long plate and a short plate (Design 3 [LL61 mm/RL166 mm]) shows superior biomechanical properties to the conventional single long plate (Design 1 [TL246 mm]) and reveals the most reliable fixation stability among the three designs with short plates. Compared to conventional Design 1, Design 3 provides higher plate safety (maximum tensile stress on plates reduced by 6.3%), lower system fixation instability (relative total displacement reduced by 41.4%), and good bone segment stability (bone segment dislocation below 42.1 µm) under masticatory activities. CONCLUSIONS: Preclinical evidence supports the biomechanical feasibility of using short MRPs for complete mandible reconstruction. Furthermore, the results could also provide valuable information when treating other large-sized bone defects using short customised implants, expanding the potential of AM for use in implant applications.

Biomechanical comparison of locking and non-locking patient-specific mandibular reconstruction plate using finite element analysis.

Patient-specific mandibular reconstruction plate (PSMRP), as one of the patient-specific implants (PSIs), offers a host of benefits to mandibular reconstruction. Due to the limitation of fabricating screw hole threads in the PSMRP, 3D printed PSMRP is applied to the non-locking system directly in the mandibular reconstruction with bone graft regardless of the locking system. Since the conventional manual-bending reconstruction plate (CMBRP) provides better fixation in the locking system, it needs to be validated whether the locking PSMRP performs better than the non-locking PSMRP in the patient-specific mandibular reconstruction. Thereupon, the purpose of this study was to compare the biomechanical behavior between the locking and non-locking PSMRP. Finite element analysis (FEA) was used to conduct the biomechanical comparison between the locking PSMRP and non-locking PSMRP by simulating the momentary incisal clenching through static structural analysis. Mandible was reconstructed through the virtual surgical planning, and subsequently a 3D model of mandibular reconstruction assembly, including reconstructed mandible, PSMRP, and fixation screws, was generated and meshed for the following FEA simulations. In the form of equivalent von Mises stress, equivalent elastic strain, and total deformation, the locking PSMRP demonstrated its higher strengths of preferable safety, desirable flexibility, and anticipated stability compared with the non-locking PSMRP, indicated by much lower maximum stress, lower maximum strain and equivalent displacement. Locking PSMRP/screw system provides a better fixation effect to the patient-specific mandibular reconstruction than the non-locking one as a result of its productive fixation nature. FEA plays a paramount role in pre-validating the design of PSMRP through the biomechanical behavior evaluation in static structural analysis.

[Conduction anesthesia of the infraorbital nerve - A guide to intraoral nerve block anesthesia of the infraorbital nerv]. / Leitungsanästhesie des Nervus infraorbitalis.

In order to be able to perform major oral surgery in the upper jaw, sufficient local analgesia is indispensable. While the inferior alveolar nerve is often blocked for dental treatments in the lower jaw, block anesthesia in the upper jaw is less common. This article gives pragmatic advice on how to block the infraorbital nerve. By using this method patients comfort is significantly improved and the surgeon can focus on the treatment at hand.

Accuracy of computer-assisted mandibular reconstructions with free fibula flap: Results of a single-center series.

OBJECTIVES: We evaluated the accuracy of computer-assisted mandibular reconstructions. PATIENTS AND METHODS: We retrospectively reviewed data for 26 patients who had mandibular reconstruction with a microvascular free fibula flap, January 2015 to June 2018. Postoperative mandible models were obtained from computed tomography scans. After registering the models to the corresponding preoperative plan, we performed comparative measurements. Patients were grouped by condylar involvement and subdivided based on number of fibular segments used for reconstruction. For each segment, we measured length and osteotomy angles. For the final postoperative outcome, we compared intercoronoid, intergonial, and anteroposterior distances and intersegmental plane shift. RESULTS: Means (SD) for deviation of each osteotomy angle and fibular segment length were 1.98° (2.98) and 1.78 mm (2.69), respectively, remaining constant across subgroups. Other mean values were as follows: intercoronoid distance deviation, 3.86 mm (range, 0.20-11.21 mm); intergonial distance deviation, 3.14 mm (range, 0.05-8.28 mm); anteroposterior distance deviation, 2.92 mm (range, 0.03-8.49 mm); and intersegmental plane shift, 11.00° (range, 2.76-24.15°). Where the condyle was preserved, the intercoronoid and intergonial deviation means differed significantly (respectively 5.02 mm and 4.88 mm, both P < 0.05) for one-segmented and three-segmented fibular reconstructions. Furthermore, reconstructions involving the condylar region compared with condyle preservation showed significantly different intersegmental plane shifts (7.18°; P < 0.05). CONCLUSION: Computer-assisted surgery provides cutting guides for obtaining accurate fibular segments, but current fixation methods lead to inaccuracies and reproducibility errors. In multisegmental transfer with condylar involvement, computer-assisted fixation is recommended to ensure accuracy of the preoperative plan.

Cone Beam Computed Tomography Evaluation of the Artery in the Lateral Wall of the Maxillary Sinus: Retrospective Analysis of 602 Sinuses.

PURPOSE: This retrospective study evaluates the location of the arteries in the maxillary sinus, particularly in the middle portion, using cone beam computed tomography (CBCT) scans that can detect the lateral arteries with high reliability. METHODS: In this retrospective study, 2 experienced independent examiners evaluated 602 sinuses on CBCT scans. DISCUSSION: No significant correlation was found between the location of arteries and the patient's age, sex, or dentition. In 92.0% (P ≤ 0.001) of the sinuses, at least 1 arterial branch was detectable. CONCLUSION: Based on the CBCT scans, we found that a very high proportion of patients have the maxillary artery in their lateral sinus wall, which is important information for sinus augmentation or sinus surgery.

Retrospective analysis of 471 surgically treated zygomaticomaxillary complex fractures.

PURPOSE: Zygomaticomaxillary complex (ZMC) fractures are frequent in facial trauma; only fractures of the mandible are more common. Although the frequency of these fractures is geographically consistent, the aetiology differs widely among countries and even regions. Differences in socio-economic status and the ageing population seem to be two causes. This retrospective epidemiological study evaluates patients who were surgically treated for ZMC fractures at a Swiss university clinic. MATERIALS AND METHODS: This study included 471 patients who were surgically treated for ZMC fractures in an oral and maxillofacial surgery clinic at a Swiss university hospital between January 2004 and December 2012. Complicated fractures such as LeFort II/III and bilateral ZMC fractures were excluded. Data on gender, age, and type of trauma were recorded. Fractures were classified by aetiology: motorised road traffic (car or motorcycle), bicycle, interpersonal violence, sports, falls (both less than and greater than 3 m in height) and other causes. RESULTS: A total of 350 patients were male (74%), and 121 were female (26%). The ZMC fractures were most likely to occur in the third decade (117 cases, 25%). A predominance of male patients was found in the young age groups, but an equal ratio was found in the elderly groups. Etiologically, falls of less than 3 m were the most common cause of ZMC fractures (125 cases, 27%). Interpersonal violence was second (88 patients, 19%); male patients dominated this group, which had a male-to-female ratio of 21:1. A predominance of male patients was found in every subdivision when analysing by aetiology and gender. The lowest proportion of males (57%) was found for falls of less than 3 m. CONCLUSION: In our study, interpersonal violence and falls outnumbered road traffic accidents among causes of maxillofacial fractures. This is probably a consequence of strict road and work laws. Additionally, the older and more active populations accounted for the highest proportion of falls, and young male patients were the predominant victims of ZMC fractures.

Traitement médicamenteux du lichen plan buccal.

Oral lichen planus is a relatively common T-cell mediated inflammatory disease with potential malignant transformation. It may present itself with pain and oral lesions such as ulcers and Wickham’s striae. Treatment includes topical corticosteroids, preferably Clobetasol, immunosuppressive drugs and retinoids. Hyaluronic acid and aloe vera have been proven to be successful. If topical treatment fails, systemic therapy with corticosteroids may be needed. Because of the potential malignant transformation periodic follow-up is mandatory.

Die intraligamentäre Anästhesie. Eine wertvolle Alternative zu konventionellen Techniken?

Reliable analgesia can nowadays be achieved with several techniques and different anesthetic solutions, but side effects may be encountered. Severe and potentially fatal cardiovascular reactions can be the result of an intravascular injection. An easy to use, effective and safe alternative is the periodontal ligament injection. Nerve damage or cardiovascular side effects are not to be expected. This type of anesthesia can be of advantage for many dental procedures. With new devices like the computer-controlled local anesthetic delivery system, the periodontal ligament injection is a convenient way of local anesthesia for both patient and dentist.

Is radical surgery of an inverted papilloma of the maxillary sinus obsolete? a case report.

BACKGROUND: Sinonasal inverted papilloma is a locally aggressive tumor arising from the Schneiderian membrane which lines the nasal cavity and paranasal sinuses. Aggressive surgical approaches, such as lateral rhinotomy, were used until recently for complete removal of the inverted papilloma. Currently, endoscopic resection is the gold standard in the treatment of inverted papilloma. However, there are situations that justify an open approach. For example there are studies that report a higher postoperative recurrence rate after endonasal endoscopic resection, particularly in the treatment of recurrent diseases. While endoscopic resection performed by an experienced surgeon is definitely a minimally invasive therapy, an open approach is not necessarily associated with functional and aesthetic disadvantages. This case report describes the treatment of inverted papilloma by an open approach. This has been described before but the new gold standard of endoscopic resection has to be taken into account before any treatment decision is made nowadays. CASE PRESENTATION: Contrast-enhanced magnetic resonance imaging of the head and neck area was indicated in a 72-year-old white German man who presented with suspected squamous cell carcinoma of his lower lip. Magnetic resonance imaging additionally revealed a 3×2 cm2 polycyclic arranged mucosal thickening with cystic and solid contrast affine shares at the antral laterocaudal area of his right maxillary sinus, extending from his right lateral nasal wall to his maxillary sinus floor. He received antral polypectomy with medial maxillectomy via a unilateral LeFort I osteotomy approach. His pterygoid plate was preserved. A histological examination demonstrated a tumor composed of hyperplastic squamous epithelium protruding into the stroma (surface epithelial cells grew downward into the underlying supportive tissue), thus producing a grossly convoluted cerebriform appearance. Two weeks later, the patient regained a well-formed maxilla without any restrictions. He has remained disease-free for 25 months following the surgery and surveillance was continued in our tumor clinic. CONCLUSIONS: Endoscopic resection of an inverted papilloma continues to be the gold standard. However, some cases require a radical approach. This does not necessarily increase patient morbidity.

Incidence and frequency of nondental incidental findings on cone-beam computed tomography.

PURPOSE: The purpose of the present study was to determine the frequency of relevant nondental related incidental findings in cone-beam computed tomography (CBCT) of the head and neck. MATERIAL AND METHODS: Nine hundred ninety-nine images were retrospectively reviewed for incidental findings. Those were defined as carotid artery calcification (CAC), paranasal sinus findings (PSF), sialolithiasis of the parotid gland (SP) or submandibular gland (SSub), calcification of the ligamentum stylohyoideum (CLS), and Stafne bone cavity (SBC). All datasets obtained between 2010 and 2014 at a university-based school of dental medicine in Switzerland were reviewed. Demographic data such as age and sex were also recorded. RESULTS: A total of 350 incidental findings within the 999 CBCT scans were identified. The most frequent finding was PSF (27.8%), followed by CLS (11.6%), CAC (5.3%), and SSub (0.8%). No SP or SBC was found. Incidental findings were most frequent between 61 and 70 years of age. Males had a higher prevalence in CAC, PSF, and SSub than females. CONCLUSIONS: These results underscore the need for a complete examination of every CBCT image beyond the region of interest.

TABOTAMP® in der MKG-Chirurgie – Wirkung, Indikationen und Kontraindikationen.

Since the 1950s, oxidised regenerate cellulose (TABOTAMP ®) has been successfully applied for local haemostasis in intra- or postoperative bleeding complications. The scope of this medical product is large and it has found its place in oral and maxillofacial surgery. Although the application of TABOTAMP ® in medicine and dentistry is common, further complications next to the absence of the haemostatic effect may be encountered if used incorrectly. The aim of this article is an update on the proper use of TABOTAMP ®. Further, tips are provided for the indication-specific application of this useful agent in clinical practice.

The 3dMD photogrammetric photo system in cranio-maxillofacial surgery: Validation of interexaminer variations and perceptions.

BACKGROUND: Three-dimensional photography of the face is increasingly used to overcome the downsides of conventional photography or anthropometry regarding reliable evaluation. However, the precision of such a system has to be validated before it can be implemented for clinical use. MATERIAL AND METHODS: Eight people were photographed with the 3dMDface system using lighting from sets of 2 × 4 compact fluorescent lights in a clinical photography room without natural light sources. Two different operators then individually, and without interaction, marked 27 different anatomical landmarks using the 3dMD Patient software. During this process, the operators were fully blinded against each other. The purpose of the study was to determine the repeatability and accuracy of the system when used by different operators and at different times. The 3D differentiation was analyzed using mixed ANOVA with person as the random factor, and operator, repetition, and landmark as the fixed factors. The ANOVA was followed by a Ryan-Einot-Gabriel-Welsch F post-hoc test for landmarks. RESULTS: Statistical analysis grouped the landmarks into three subgroups: high precision, medium precision and low precision. CONCLUSIONS: Virtual 3D models derived from the 3dMDface system not only provide a high level of technical precision but also of intra- and interobserver reliability regarding landmark identification. However, some of the classical landmarks are not reliable when it comes to virtual models; these are generally landmarks that examiners of real patients would tend to identify using palpation of underlying bony structures, such as the soft gonion.

Fallpräsentation: Kiefergelenkbeschwerden als erstes Zeichen einer malignen Erkrankung.

CASE REPORT: TMJ-like symptoms as first sign of a tumorous disease. Metastasis as an uncommon origin of the symptoms (in German).

Influence of Mirrored Computed Tomograms on Decision-Making for Revising Surgically Treated Orbital Floor Fractures.

PURPOSE: This study evaluated whether intraoperative imaging with computer-assisted virtual reconstruction would be advantageous in reconstructions of orbital floor fractures. The surgeon's intention to revise a reconstructed primary orbital floor fracture by evaluating a postoperative mirrored computed tomographic (CT) scan was analyzed intraoperatively before wound closure, during inpatient hospitalization, and after hospitalization. The inter-rater agreement and the match of intention to revise and actual revision were analyzed. MATERIALS AND METHODS: Fifty-one anonymized postoperative CT scans of patients with a unilateral orbital floor fracture were mirrored using software. These computer-assisted virtual reconstructions were consecutively examined by 4 examiners. Seven of these patients underwent a revision. In the first part, the inter-rater agreements for all 3 times were analyzed. In the second part, the examiners' intentions to revise were compared with the actual performed revisions. RESULTS: The overall inter-rater agreements were 0.69 for the intraoperative phase, 0.55 for the in-hospital phase, and 0.39 for the post-hospital phase. The intraoperative inter-rater agreement for each examiner was 0.58 to 0.80. The Fleiss κ value for the in-hospital and post-hospital phases was lower. The comparison of the examiners' intention to revise and the actual revisions showed that 15 to 24 additional would have been revised. In contrast, 6 of 7 actual revisions would have been revised intraoperatively. The missed actual revision was the same case by all 4 examiners. The accordance of intention to revise with the actual revisions decreased during hospitalization and even more after hospitalization. This study showed strong agreement among examiners for revising anatomically incorrectly reduced orbital floor fractures intraoperatively by evaluating postoperative mirrored CT scans. During the in-hospital and post-hospital phases, the restraints against revision seemed to increase, thus leading to poorer inter-rater agreement. This analysis of postoperative CT scans with computer-assisted virtual reconstructions of the orbit would have led to considerably more revisions intraoperatively, but all actual revisions were detected except for 1 case. This case was the same for all 4 examiners. Operation time would have been prolonged in the additional revised cases, but a better anatomic reconstruction would have been achieved. Furthermore, the intraoperative result of the reconstruction would have been controlled instantly and corrected immediately, if needed. CONCLUSION: This study showed that of 6 of 7 actual revisions, implant placement would have been revised intraoperatively by all 4 examiners, if intraoperative imaging with computer-assisted virtual reconstruction of the orbit would have been applied. Therefore, the authors suggest that intraoperative imaging with computer-assisted virtual reconstruction could be advantageous in the prevention of later revisions of orbital floor fractures. In this study, the threshold to revise implant placement intraoperatively seemed to be lower when using intraoperative imaging with virtual reconstructions, because considerably more cases would have been revised intraoperatively by the examiners. In the in-hospital and post-hospital phases, this threshold increased, suggesting the more important role of clinical findings. It is uncertain whether the actual surgeons would have revised the same cases as the examiners if they had used intraoperative imaging with virtual reconstructions for their deliberation. However, the intraoperative inter-rater agreement was good and cost-intensive postoperative revisions might be prevented.

Frequency and anatomy of the retromolar canal - implications for the dental practice.

The retromolar canal (RMC) is an anatomical variant of the mandibular canal. Apart from blood vessels it also contains accessory nerve fibers and is clinically important, because its presence can account for failures of mandibular block anesthesias and in rare cases, injuries of its neurovascular bundle can lead to complications such as hemorrhages and dysesthesias. The aim of this retrospective case study was to analyze the frequency and anatomy of the RMC using cone beam computed tomography (CBCT) in order to draw conclusions for the dental practice. A total of 680 CBCT scans comprising 1,340 mandibular sides were evaluated. A total of 216 RMCs (16.12%) were found. The most common appearance of the canal (39.82%) corresponded to type Al (vertical course), whereas type C (horizontal course) occurred least often (6.02%). Mean measured values were 1.03 mm (SD=0.27mm) regarding the RMC diameter, 10.19 mm (SD=2.64mm) regarding the RMC height and 15.10 mm (SD=2.83 mm) regarding the distance of the RMC to the second molar. Neither demographic factors nor the spatial resolution of the CBCT had a statistically significant impact on the frequency of the RMC. Since the present study revealed a frequency of RMCs amounting to 16.12% (corresponding approximately to every sixth retromolar area), we recommend to spare it during surgery or to consider an additional locoregional anesthesia in the retromolar region. For preoperative diagnosis the CBCT has proved suitable, offering the possibility to select the spatial resolution depending on the indication, so that radiation exposure is reduced without a decrease in validity.

[CEOT - Calcified anomalies in dental X-ray. A case-based review of differential diagnoses in radiopaque lesions in maxilla and mandible]. / CEOT - Kalzifizierende Veränderungen im zahnärztlichen Röntgenbild.

The calcifying epithelial odontogenic tumor (CEOT) is a benign tumor entity, usually localized in the molar region of the lower jaw. CEOT is not known for a destructive growth pattern, nevertheless it grows expansive. To properly diagnose a CEOT, histological verification is necessary. Due to its rare appearance and low incidence (approximately 4 cases per year worldwide), it is usually not diagnosed or thought of at once. Usually it happens to be the "surprising" diagnosis after histological verification. Hereby, we represent a case report of a CEOT - also known as "pindborg" tumor, and discuss the most likely differential diagnoses.

Anatomic (positional) variation of maxillary wisdom teeth with special regard to the maxillary sinus.

The removal of wisdom teeth is one of the most common interventions in oral surgery. In order to avoid complications, a profound knowledge of the anatomy of teeth and adjacent tissues is crucial. In the case of maxillary wisdom teeth, their relationship to the maxillary sinus, to the pterygoid fossa, to the maxillary tuber and the adjacent venous plexus is particularly important. Three-dimensional (3D) imaging, for example by means of cone beam computed tomography (CBCT), is increasingly utilized in practice. However, the necessity of CBCT imaging is still a matter of intensive debate. The aim of this study was to describe the anatomic (positional) variation of maxillary wisdom teeth and, based on these findings, to elucidate the additional benefit of such imaging. A retrospective case study was performed using patients examined by means of CBCT imaging in the Department of Dento-Maxillofacial Radiology during the period from 2008 to 2013. Primary study variables comprised the spatial relationship of the teeth to the maxillary sinus, the degree of retention and root development, the covering of the root with bone and mucosa, the root configuration, and the developmental stage of the tooth. In addition, the association of the inclination of teeth in the transversal and sagittal plane with the above variables was evaluated. Descriptive statistical parameters were calculated for all results of the examination. In total, CBCT recordings of 713 maxillary wisdom teeth from 430 patients were evaluated. Their mean age was 29.8 years, and the proportion of male patients slightly prevailed (54.4%). Most teeth exhibited fully developed roots (64.1%). Overall 22.9% of third molars were impacted, 32.3% were retained, and 6.5% were erupting. In more than a third of the patients, wisdom teeth were in occlusion. The inclination of the third molars both in the transversal and sagittal plane was significantly associated with the distance of the root from the maxillary sinus as well as with the bony covering of the root. Owing to the possibility of evaluating preoperatively the relationship of a wisdom tooth to the maxillary sinus and to other anatomic structures, we recommend the use of CBCT, whenever conventional radiography fails to provide adequate information about the critical anatomic circumstances of maxillary third molars. However, CBCT should, at least nowadays, not be utilized as the standard radiographic examination.