Mixed methods usability evaluation of an assistive wearable robotic hand orthosis for people with spinal cord injury.

BACKGROUND: Robotic hand orthoses (RHO) aim to provide grasp assistance for people with sensorimotor hand impairment during daily tasks. Many of such devices have been shown to bring a functional benefit to the user. However, assessing functional benefit is not sufficient to evaluate the usability of such technologies for daily life application. A comprehensive and structured evaluation of device usability not only focusing on effectiveness but also efficiency and satisfaction is required, yet often falls short in existing literature. Mixed methods evaluations, i.e., assessing a combination of quantitative and qualitative measures, allow to obtain a more holistic picture of all relevant aspects of device usability. Considering these aspects already in early development stages allows to identify design issues and generate generalizable benchmarks for future developments. METHODS: We evaluated the short-term usability of the RELab tenoexo, a RHO for hand function assistance, in 15 users with tetraplegia after a spinal cord injury through a comprehensive mixed methods approach. We collected quantitative data using the Action Research Arm Test (ARAT), the System Usability Scale (SUS), and timed tasks such as the donning process. In addition, qualitative data were collected through semi-structured interviews and user observations, and analyzed with a thematic analysis to enhance the usability evaluation. All insights were attributed and discussed in relation to specifically defined usability attributes such as comfort, ease of use, functional benefit, and safety. RESULTS: The RELab tenoexo provided an immediate functional benefit to the users, resulting in a mean improvement of the ARAT score by 5.8 points and peaking at 15 points improvement for one user (clinically important difference: 5.7 points). The mean SUS rating of 60.6 represents an adequate usability, however, indicating that especially the RHO donning (average task time = 295 s) was perceived as too long and cumbersome. The participants were generally very satisfied with the ergonomics (size, dimensions, fit) of the RHO. Enhancing the ease of use, specifically in donning, increasing the provided grasping force, as well as the availability of tailoring options and customization were identified as main improvement areas to promote RHO usability. CONCLUSION: The short-term usability of the RELab tenoexo was thoroughly evaluated with a mixed methods approach, which generated valuable data to improve the RHO in future iterations. In addition, learnings that might be transferable to the evaluation and design of other RHO were generated, which have the potential to increase the daily life applicability and acceptance of similar technologies.

A Tailorable Robotic Hand Orthosis to Support Children with Neurological Hand Impairments: a Case Study in a Child's Home.

Neurological disorders such as traumatic brain injuries (TBI) can lead to hand impairments in children, negatively impacting their quality of life. Fully wearable robotic hand orthoses (RHO) have been proposed to actively support children and promote the use of the impaired limb in daily life. Here we report a case study on the feasibility of using the pediatric RHO PEXO for assistance at home in a 13- year-old child with hand impairment after TBI. The size and functionalities of the RHO were first fully tailored to the child's needs. We trained the child and their parent on independently using the RHO before taking it home for a period of two weeks. The use of the RHO improved hand ability. Additionally, the tailoring and training benefited the unimanual capacity (Box and Block Test score +2 after tailoring) and bimanual performance (Assisting Hand Assessment score +4) of the child with PEXO. Further, it increased device acceptance by the child and the parent. The child used PEXO at home for 76 minutes distributed over three days during eating and drinking tasks. Personal and environmental factors caused the moderate use. No adverse events or safety-related issues occurred. This study highlights the value of tailoring an assistive RHO and, for the first time, demonstrates the feasibility of home use of a pediatric RHO by children with neurological hand impairments.

Feasibility of force myography for the direct control of an assistive robotic hand orthosis in non-impaired individuals.

BACKGROUND: Assistive robotic hand orthoses can support people with sensorimotor hand impairment in many activities of daily living and therefore help to regain independence. However, in order for the users to fully benefit from the functionalities of such devices, a safe and reliable way to detect their movement intention for device control is crucial. Gesture recognition based on force myography measuring volumetric changes in the muscles during contraction has been previously shown to be a viable and easy to implement strategy to control hand prostheses. Whether this approach could be efficiently applied to intuitively control an assistive robotic hand orthosis remains to be investigated. METHODS: In this work, we assessed the feasibility of using force myography measured from the forearm to control a robotic hand orthosis worn on the hand ipsilateral to the measurement site. In ten neurologically-intact participants wearing a robotic hand orthosis, we collected data for four gestures trained in nine arm configurations, i.e., seven static positions and two dynamic movements, corresponding to typical activities of daily living conditions. In an offline analysis, we determined classification accuracies for two binary classifiers (one for opening and one for closing) and further assessed the impact of individual training arm configurations on the overall performance. RESULTS: We achieved an overall classification accuracy of 92.9% (averaged over two binary classifiers, individual accuracies 95.5% and 90.3%, respectively) but found a large variation in performance between participants, ranging from 75.4 up to 100%. Averaged inference times per sample were measured below 0.15 ms. Further, we found that the number of training arm configurations could be reduced from nine to six without notably decreasing classification performance. CONCLUSION: The results of this work support the general feasibility of using force myography as an intuitive intention detection strategy for a robotic hand orthosis. Further, the findings also generated valuable insights into challenges and potential ways to overcome them in view of applying such technologies for assisting people with sensorimotor hand impairment during activities of daily living.

Reliability, validity and clinical usability of a robotic assessment of finger proprioception in persons with multiple sclerosis.

BACKGROUND: Multiple sclerosis often leads to proprioceptive impairments of the hand. However, it is challenging to objectively assess such deficits using clinical methods, thereby also impeding accurate tracking of disease progression and hence the application of personalized rehabilitation approaches. OBJECTIVE: We aimed to evaluate test-retest reliability, validity, and clinical usability of a novel robotic assessment of hand proprioceptive impairments in persons with multiple sclerosis (pwMS). METHODS: The assessment was implemented in an existing one-degree of freedom end-effector robot (ETH MIKE) acting on the index finger metacarpophalangeal joint. It was performed by 45 pwMS and 59 neurologically intact controls. Additionally, clinical assessments of somatosensation, somatosensory evoked potentials and usability scores were collected in a subset of pwMS. RESULTS: The test-retest reliability of robotic task metrics in pwMS was good (ICC=0.69-0.87). The task could identify individuals with impaired proprioception, as indicated by the significant difference between pwMS and controls, as well as a high impairment classification agreement with a clinical measure of proprioception (85.00-86.67%). Proprioceptive impairments were not correlated with other modalities of somatosensation. The usability of the assessment system was satisfactory (System Usability Scale ≥73.10). CONCLUSION: The proposed assessment is a promising alternative to commonly used clinical methods and will likely contribute to a better understanding of proprioceptive impairments in pwMS.

Tremor analysis with wearable sensors correlates with outcome after thalamic deep brain stimulation.

INTRODUCTION: Thalamic deep brain stimulation (DBS) provides excellent tremor control in most patients with essential tremor (ET). However, not all tremor patients show clinically significant improvement after DBS surgery. Currently, there is no reliable clinical or instrument-based measure to predict how patients respond to DBS. Therefore, we set out to provide a method for tremor outcome prediction prior to surgery. METHODS: We retrospectively analysed quantitative tremor data collected with inertial measurement units (IMU) in 13 patients who underwent DBS surgery in the ventral intermediate nucleus of the thalamus (VIM). All patients were diagnosed with either ET or ET-plus according to current diagnostic criteria of the movement disorder society. We used linear and logistic regression models to evaluate the influence of different tremor characteristics on tremor outcome. RESULTS: We found that the ratio between the amplitude of the first overtone and the amplitude of the fundamental frequency, denoted as the Harmonic Index, has a significant influence on tremor reduction after DBS surgery. This measure shows a strong correlation with the post-operative improvement of tremor outcome based on the Whiget Tremor Rating Scale. CONCLUSION: Based on these findings, we propose a novel approach to predict tremor outcome after DBS surgery. Quantitative tremor assessment adds to the preoperative prediction of DBS response and might therefore have a relevant clinical impact in the management of patients suffering from pharmacoresistant tremor.

Investigating Motor Skill Learning Processes with a Robotic Manipulandum.

Skilled reaching tasks are commonly used in studies of motor skill learning and motor function under healthy and pathological conditions, but can be time-intensive and ambiguous to quantify beyond simple success rates. Here, we describe the training procedure for reach-and-pull tasks with ETH Pattus, a robotic platform for automated forelimb reaching training that records pulling and hand rotation movements in rats. Kinematic quantification of the performed pulling attempts reveals the presence of distinct temporal profiles of movement parameters such as pulling velocity, spatial variability of the pulling trajectory, deviation from midline, as well as pulling success. We show how minor adjustments in the training paradigm result in alterations in these parameters, revealing their relation to task difficulty, general motor function or skilled task execution. Combined with electrophysiological, pharmacological and optogenetic techniques, this paradigm can be used to explore the mechanisms underlying motor learning and memory formation, as well as loss and recovery of function (e.g. after stroke).