Computer guided maxillo-malar piezoelectric osteotomies for midface augmentation.

PURPOSE: Despite maxillo-malar osteotomies having been discarded in the most recent literature, in the setting of orthognathic surgery they provide several advantages for middle third augmentation. This paper reintroduces maxillo-malar osteotomies as an effective method to increase volume of midfacial region in combination with contemporary technology, including piezosurgery, virtual surgical planning, and navigation. MATERIAL AND METHODS: Eighteen patients with midface hypoplasia were included in this study and underwent orthognathic surgery with maxillo-malar osteotomies. All patients underwent the same workflow: virtual design of maxillo-malar osteotomies, surgery with navigation-assisted piezoelectric osteotomies, and computerized morphometric analysis. RESULTS: Simulated maxillo-malar osteotomies were successfully replicated in the operating room, as shown by accuracy evaluation performed using three-dimensional analysis. In long-term follow-up period, no permanent complications were assessed. Superimposition between postoperative and preoperative CBCTs revealed that the soft tissue area influenced by the underlying skeletal movement was comparable for all cases. CONCLUSIONS: Virtual surgical planning, navigation, and piezosurgery are today indispensable tools to perform maxillo-malar osteotomies safely and accurately. We suggest incorporating such osteotomies in the surgeon's armamentarium for patients with severe midfacial hypoplasia as they offer an integrated solution to restore functionality and aesthetics.

Social Profiloplasty: A Practical Assessment and Injection Guide.

The trend of aesthetic medical procedures continues growing every year since decades all over the globe, especially considering minimal invasive treatments since the results are immediate and the downtime minimal. Hence, treatments with hyaluronic acid fillers have become extremely popular and routinely used in common practice. However, numerous areas of treatment were identified and described in the last years clinical training and consciousness of possibly complication remain still under represented. In the following article, we present four key treatment areas for optimal overall facial rejuvenation of what the authors define the social profile. Of each area an assessment, anatomical considerations, danger zones, and the preferred personal technique of the authors are described.

Temporomandibular Joint Arthrocentesis and Microfragmented Adipose Tissue Injection for the Treatment of Internal Derangement and Osteoarthritis: A Randomized Clinical Trial.

PURPOSE: Internal derangement and osteoarthritis are the most common degenerative temporomandibular joint diseases and initial treatment for such conditions relies on arthrocentesis. Microfragmentation of adipose tissue has been proven in orthopedic literature to represent a more effective method to preserve stem cells, but no application has ever been reported in the temporomandibular joint. The purpose of this randomized clinical trial is to compare standard treatment conducted by injecting hyaluronic acid after the procedure to the new treatment relying upon microfragmented adipose tissue injection using the Lipogems technology. MATERIALS AND METHODS: A randomized clinical trial was designed enrolling 20 patients in the control group receiving the standard treatment and 20 patients in the experimental group receiving microfragmented adipose tissue obtained through the Lipogems technology after arthrocentesis. Two main outcomes were defined, pain (visual analogic scale) and function (maximum interincisal opening). Both were measured in the immediate preoperative time, and 10 days, 1 month, and 6 months after the procedure. RESULTS: In both groups, pain reduction and mouth opening significantly improved compared with the preoperative situation (P = .001). At 6-month follow-up, there was an almost statistically significant reduction of pain compared with preoperative visual analogic scale (P = .0546) and a statistically significant improvement of mouth opening (P = .0327). Overall, statistical analyses showed that the experimental group had a statistically significant superiority in the success rate of the procedure compared with the control group (P = .018). CONCLUSIONS: Preliminary results of this clinical trial show that the injection of microfragmented adipose tissue can significantly improve outcomes of pain and function compared with the standard treatment and encourage to pursue research on this topic. Further studies with a longer follow-up time are needed to evaluate the clinical stability of the achieved improvement in pain and function.

Nonsurgical Redefinition of the Chin and Jawline of Younger Adults With a Hyaluronic Acid Filler: Results Evaluated With a Grid System Approach.

BACKGROUND: Aesthetic treatment of the lower face is increasingly in demand, particularly owing to age-related changes in appearance. VYC-25L is a novel hyaluronic acid filler with high G' and high cohesivity, specifically designed for sculpting and contouring of the chin and jaw. OBJECTIVES: The aim of this study was to assess the use of a grid traced onto the chin and jaw for guiding treatment with VYC-25L. METHODS: This was a retrospective, single-center analysis of data from adult patients undergoing treatment of the lower third of the face with VYC-25L. A grid system of horizontal and vertical lines was used to systematize the process of treatment planning and performance. RESULTS: Thirty subjects were enrolled (53.3% female; mean [standard deviation] age, 34.4 [2.8] years). The mean quantity of VYC-25L used was 4.0 [0.8] mL. Based on the 5-point Global Aesthetic Improvement Scale, 29 patients (96.7%) rated their appearance at 20 days posttreatment as "much improved" or "very much improved." The only complications recorded were early transient soft-tissue edema (n = 14; 46.7%) and bruising (n = 6; 20.0%). There were no cases of infection, paresthesia, asymmetry, hematoma, necrosis, or skin discoloration. CONCLUSIONS: Treatment of the chin and jawline with VYC-25L, with injection locations determined by a standardized grid-based approach, appears to be effective and safe with high rates of patient satisfaction. Injection of this filler offers a potentially high-impact approach for patients across a variety of biological and economic circumstances.

Volumetric Analysis of Fat Injection by Computerized Tomography in Orthognathic Surgery: Preliminary Report on a Novel Volumetric Analysis Process for the Quantification of Aesthetic Results.

BACKGROUND: Integrated approaches to orthognathic surgery should include accurate volumetric evaluation of the skull and soft tissues. In patients with dentofacial deformities, the most frequent aesthetic deficits are attributable to an underdevelopment of hard and soft tissues. Traditional osteotomic procedures often fail to guarantee a stability of soft tissues over time. For this reason, in selecting a surgical strategy, the surgeon should consider not only traditional osteotomies, but also soft-tissue improving procedures, such as lipofilling. Preoperative surgical planning systems, such as the Virtual surgical planning (VSP) protocol, are based mainly on skeletal movement prediction. Quantitative estimation of soft-tissue modifications is not part of common clinical practice. Most commonly, the evaluation of soft-tissue modifications after orthognathic procedures is instead performed by clinical qualitative means.The purpose of this study was to describe a novel computed tomography (CT)-based volumetric analysis process for the quantification of injected autologous adipose tissue in patients who have undergone simultaneous orthognathic and lipofilling procedures. METHODS: This was a retrospective review of consecutive patients who underwent combined orthognathic surgery and lipofilling from June 2016 to May 2017 for malocclusion with functional and aesthetic impairments. Preoperative planning included clinical evaluation and virtual osteotomy planning according to the VSP protocol. The volume of fat to be injected was estimated clinically by comparing virtual renderings with preoperative clinical photographs. The surgical technique involved Le Fort I and sagittal split mandibular osteotomies, combined with autologous fat injection in the malar and perioral regions. Postoperative evaluation was performed with a novel imaging process based on CT image segmentation to quantify the exact volume of injected fat. Skeletal stability was also evaluated at 3 months. RESULTS: Sixteen patients were enrolled in the study, all females, with a mean age of 24.5 years (range, 18-36 years). The mean difference between the fat tissue injected and that quantified postoperatively was 6.01 cm. All patients had clinically satisfactory facial convexity, with complete restoration of the cheekbone contour, at 3 months. CONCLUSION: This study introduces a novel CT-image based technique to quantitatively assess the contribution of injected fat to the postoperative soft-tissue volume increase after combined orthognathic surgery with autologous lipofilling. In the future, this CT-based volumetric analysis technique could be the gold standard for evaluating facial lipofilling outcomes, and for assessing clinical aesthetic outcomes based on the injected volume of fat.

Piezosurgery: Ten Years' Experience of Percutaneous Osteotomies in Rhinoplasty.

PURPOSE: The possibility to obtain precise osteotomies without major soft tissue damage represents a key point in modern approaches to rhinoplasty. In 2007, the authors first described their ultrasonic approach for percutaneous nasal bone osteotomies with minimal periosteal detachment. In this article, they retrospectively analyze the results of their piezo-surgical rhinoplasty technique through their 10-year experience and describe new perspectives of this technique. PATIENTS AND METHODS: A series of 183 patients was retrospectively evaluated. Surgical technique was based on piezoelectric external nasal osteotomies, performed percutaneously, without periosteal detachment. For the last patients, the piezoelectric instrument also was tracked with a navigator (piezo-navigated approach). Data on surgery, hospitalization, ecchymosis, edema, and postoperative complications were evaluated. RESULTS: Of the 183 patients, 168 (91.8%) showed grade 0 or 1 edema. Grade 2 edema was noticed in only 15 of 183 patients (8.2%). In 6 of the 183 procedures (3.3%), postoperative complications potentially related to the piezoelectric osteotomy system occurred. CONCLUSION: The piezoelectric external approach can be considered a safe and reliable technique. Preliminary data suggest the possibility of using surgical planning and navigation in positioning the osteotomies in selected subsets of patients.

All-in-one surgical guide: A new method for cranial vault resection and reconstruction.

INTRODUCTION: Great precision is required for craniofacial surgery, and computer-aided design (CAD) methods may be used to plan surgery before it is performed. In this study, three-dimensional (3D)-printed cutting guides are used to match computer models with surgical procedures. We describe a novel method of computer-aided surgery for autologous cranioplasty that includes a new strategy for generating and using cutting guides. These guides may be used not only for osteotomies, but also for many other steps in the surgical procedure. MATERIALS AND METHODS: Preoperatively, anatomical data were imported into a CAD package and used for virtual surgical planning (VSP). Cutting guides were designed after considering how to integrate all the surgical steps. Models of the microplates and micro-screws were also made. Surgical guides were exported and printed, and preoperative simulations using a replica of the patient's skull established the sequence of steps. The accuracy of the procedure was evaluated postoperatively using computed tomography (CT) scans. RESULTS: In every patient examined, the all-in-one surgical-guide system was able to automate the many steps in the procedure and dramatically decreased the duration of surgery. The experimental guide enhanced every phase of surgery, including excising the lesion, and harvesting, positioning, and fixing the graft. In each step, precision was enhanced and the outcome corresponded with the VSP. CONCLUSIONS: The few previous reports on cutting guides used in cranioplasty generally describe the use of separate guides for dismantling and reconstruction. The ability to perform more surgical sequences using a single tool can improve surgical accuracy. Clearly there is no single perfect surgical guide; however, effective surgical-design strategies should be used to build the best approach to each procedure.