Development of Novel Polysaccharide Membranes for Guided Bone Regeneration: In Vitro and In Vivo Evaluations.

INTRODUCTION: Guided bone regeneration (GBR) procedures require selecting suitable membranes for oral surgery. Pullulan and/or dextran-based polysaccharide materials have shown encouraging results in bone regeneration as bone substitutes but have not been used to produce barrier membranes. The present study aimed to develop and characterize pullulan/dextran-derived membranes for GBR. MATERIALS AND METHODS: Two pullulan/dextran-based membranes, containing or not hydroxyapatite (HA) particles, were developed. In vitro, cytotoxicity evaluation was performed using human bone marrow mesenchymal stem cells (hBMSCs). Biocompatibility was assessed on rats in a subcutaneous model for up to 16 weeks. In vivo, rat femoral defects were created on 36 rats to compare the two pullulan/dextran-based membranes with a commercial collagen membrane (Bio-Gide®). Bone repair was assessed radiologically and histologically. RESULTS: Both polysaccharide membranes demonstrated cytocompatibility and biocompatibility. Micro-computed tomography (micro-CT) analyses at two weeks revealed that the HA-containing membrane promoted a significant increase in bone formation compared to Bio-Gide®. At one month, similar effects were observed among the three membranes in terms of bone regeneration. CONCLUSION: The developed pullulan/dextran-based membranes evidenced biocompatibility without interfering with bone regeneration and maturation. The HA-containing membrane, which facilitated early bone regeneration and offered adequate mechanical support, showed promising potential for GBR procedures.

Bone Regeneration in Small and Large Segmental Bone Defect Models after Radiotherapy Using Injectable Polymer-Based Biodegradable Materials Containing Strontium-Doped Hydroxyapatite Particles.

The reconstruction of bones following tumor excision and radiotherapy remains a challenge. Our previous study, performed using polysaccharide-based microbeads that contain hydroxyapatite, found that these have osteoconductivity and osteoinductive properties. New formulations of composite microbeads containing HA particles doped with strontium (Sr) at 8 or 50% were developed to improve their biological performance and were evaluated in ectopic sites. In the current research, we characterized the materials by phase-contrast microscopy, laser dynamic scattering particle size-measurements and phosphorus content, before their implantation into two different preclinical bone defect models in rats: the femoral condyle and the segmental bone. Eight weeks after the implantation in the femoral condyle, the histology and immunohistochemistry analyses showed that Sr-doped matrices at both 8% and 50% stimulate bone formation and vascularization. A more complex preclinical model of the irradiation procedure was then developed in rats within a critical-size bone segmental defect. In the non-irradiated sites, no significant differences between the non-doped and Sr-doped microbeads were observed in the bone regeneration. Interestingly, the Sr-doped microbeads at the 8% level of substitution outperformed the vascularization process by increasing new vessel formation in the irradiated sites. These results showed that the inclusion of strontium in the matrix-stimulated vascularization in a critical-size model of bone tissue regeneration after irradiation.

Nesting and fate of transplanted stem cells in hypoxic/ischemic injured tissues: The role of HIF1α/sirtuins and downstream molecular interactions.

The nesting mechanisms and programming for the fate of implanted stem cells in the damaged tissue have been critical issues in designing and achieving cell therapies. The fracture site can induce senescence or apoptosis based on the surrounding harsh conditions, hypoxia, and oxidative stress (OS). Respiration deficiency, disruption in energy metabolism, and consequently OS induction change the biophysical, biochemical, and cellular components of the native tissue. Additionally, the homeostatic molecular players and cell signaling might be changed. Despite all aforementioned issues, in the native stem cell niche, physiological hypoxia is not toxic; rather, it is vitally required for homing, self-renewal, and differentiation. Hence, the key macromolecular players involved in the support of stem cell survival and re-adaptation to a new dysfunctional niche must be understood for managing the cell therapy outcome. Hypoxia-inducible factor 1-alpha is the master transcriptional regulator, involved in the cell response to hypoxia and the adaptation of stem cells to a new niche. This protein is regulated by interaction with sirtuins. Sirtuins are highly conserved NAD+-dependent enzymes that monitor the cellular energy status and modulate gene transcription, genome stability, and energy metabolism in response to environmental signals to modulate the homing and fate of stem cells. Herein, new insights into the nesting of stem cells in hypoxic-ischemic injured tissues were provided and their programming in a new dysfunctional niche along with the involved complex macromolecular players were critically discussed.

A Preclinical Validation of Iron Oxide Nanoparticles for Treatment of Perianal Fistulizing Crohn's Disease.

Fistulizing anoperineal lesions are severe complications of Crohn's disease (CD) that affect quality of life with a long-term risk of anal sphincter destruction, incontinence, permanent stoma, and anal cancer. Despite several surgical procedures, they relapse in about two-thirds of patients, mandating innovative treatments. Ultrasmall particles of iron oxide (USPIO) have been described to achieve in vivo rapid healing of deep wounds in the skin and liver of rats thanks to their nanobridging capability that could be adapted to fistula treatment. Our main purpose was to highlight preclinical data with USPIO for the treatment of perianal fistulizing CD. Twenty male Sprague Dawley rats with severe 2,4,6-trinitrobenzenesulfonic acid solution (TNBS)-induced proctitis were operated to generate two perianal fistulas per rat. At day 35, two inflammatory fistulas were obtained per rat and perineal magnetic resonance imaging (MRI) was performed. After a baseline MRI, a fistula tract was randomly drawn and topically treated either with saline or with USPIO for 1 min (n = 17 for each). The rats underwent a perineal MRI on postoperative days (POD) 1, 4, and 7 and were sacrificed for pathological examination. The primary outcome was the filling or closure of the fistula tract, including the external or internal openings. USPIO treatment allowed the closure and/or filling of all the treated fistulas from its application until POD 7 in comparison with the control fistulas (23%). The treatment with USPIO was safe, permanently closed the fistula along its entire length, including internal and external orifices, and paved new avenues for the treatment of perianal fistulizing Crohn's disease.

miRNA Delivery by Nanosystems: State of the Art and Perspectives.

MicroRNAs (miRNAs) are short (~21-23 nucleotides), non-coding endogenous RNA molecules that modulate gene expression at the post-transcriptional level via the endogenous RNA interference machinery of the cell. They have emerged as potential biopharmaceuticals candidates for the treatment of various diseases, including cancer, cardiovascular and metabolic diseases. However, in order to advance miRNAs therapeutics into clinical settings, their delivery remains a major challenge. Different types of vectors have been investigated to allow the delivery of miRNA in the diseased tissue. In particular, non-viral delivery systems have shown important advantages such as versatility, low cost, easy fabrication and low immunogenicity. Here, we present a general overview of the main types of non-viral vectors developed for miRNA delivery, with their advantages, limitations and future perspectives.

Bone regeneration in both small and large preclinical bone defect models using an injectable polymer-based substitute containing hydroxyapatite and reconstituted with saline or autologous blood.

Microbeads consisting of pullulan and dextran supplemented with hydroxyapatite have recently been developed for bone tissue engineering applications. Here, we evaluate the bone formation in two different preclinical models after injection of microbeads reconstituted with either saline buffer or autologous blood. Addition of saline solution or autologous blood to dried microbeads packaged into syringes allowed an easy injection. In the first rat bone defect model performed in the femoral condyle, microcomputed tomography performed after 30 and 60 days revealed an important mineralization process occurring around and within the core of the microbeads in both conditions. Bone volume/total volume measurements revealed no significant differences between the saline solution and the autologous blood groups. Histologically, osteoid tissue was evidenced around and in contact of the microbeads in both conditions. Using the sinus lift model performed in sheep, cone beam computed tomography revealed an important mineralization inside the sinus cavity for both groups after 3 months of implantation. Representative Masson trichrome staining images showed that bone formation occurs at the periphery and inside the microbeads in both conditions. Quantitative evaluation of the new bone formation displayed no significant differences between groups. In conclusion, reconstitution of microbeads with autologous blood did not enhance the regenerative capacity of these microbeads compared to the saline buffer group. This study is of particular interest for clinical applications in oral and maxillofacial surgery.

Roadmap on nanomedicine.

Since the launch of the Alliance for Nanotechnology in Cancer by the National Cancer Institute in late 2004, several similar initiatives have been promoted all over the globe with the intention of advancing the diagnosis, treatment and prevention of cancer in the wake of nanoscience and nanotechnology. All this has encouraged scientists with diverse backgrounds to team up with one another, learn from each other, and generate new knowledge at the interface between engineering, physics, chemistry and biomedical sciences. Importantly, this new knowledge has been wisely channeled towards the development of novel diagnostic, imaging and therapeutic nanosystems, many of which are currently at different stages of clinical development. This roadmap collects eight brief articles elaborating on the interaction of nanomedicines with human biology; the biomedical and clinical applications of nanomedicines; and the importance of patient stratification in the development of future nanomedicines. The first article reports on the role of geometry and mechanical properties in nanomedicine rational design; the second articulates on the interaction of nanomedicines with cells of the immune system; and the third deals with exploiting endogenous molecules, such as albumin, to carry therapeutic agents. The second group of articles highlights the successful application of nanomedicines in the treatment of cancer with the optimal delivery of nucleic acids, diabetes with the sustained and controlled release of insulin, stroke by using thrombolytic particles, and atherosclerosis with the development of targeted nanoparticles. Finally, the last contribution comments on how nanomedicine and theranostics could play a pivotal role in the development of personalized medicines. As this roadmap cannot cover the massive extent of development of nanomedicine over the past 15 years, only a few major achievements are highlighted as the field progressively matures from the initial hype to the consolidation phase.

Development of 3D Hepatic Constructs Within Polysaccharide-Based Scaffolds with Tunable Properties.

Organoids production is a key tool for in vitro studies of physiopathological conditions, drug-induced toxicity assays, and for a potential use in regenerative medicine. Hence, it prompted studies on hepatic organoids and liver regeneration. Numerous attempts to produce hepatic constructs had often limited success due to a lack of viability or functionality. Moreover, most products could not be translated for clinical studies. The aim of this study was to develop functional and viable hepatic constructs using a 3D porous scaffold with an adjustable structure, devoid of any animal component, that could also be used as an in vivo implantable system. We used a combination of pharmaceutical grade pullulan and dextran with different porogen formulations to form crosslinked scaffolds with macroporosity ranging from 30 µm to several hundreds of microns. Polysaccharide scaffolds were easy to prepare and to handle, and allowed confocal observations thanks to their transparency. A simple seeding method allowed a rapid impregnation of the scaffolds with HepG2 cells and a homogeneous cell distribution within the scaffolds. Cells were viable over seven days and form spheroids of various geometries and sizes. Cells in 3D express hepatic markers albumin, HNF4α and CYP3A4, start to polarize and were sensitive to acetaminophen in a concentration-dependant manner. Therefore, this study depicts a proof of concept for organoid production in 3D scaffolds that could be prepared under GMP conditions for reliable drug-induced toxicity studies and for liver tissue engineering.

Synthesis of cationic quaternized pullulan derivatives for miRNA delivery.

Pullulan is a natural polysaccharide of potential interest for biomedical applications due to its non-toxic, non-immunogenic and biodegradable properties. The aim of this work was to synthesize cationic pullulan derivatives able to form complexes with microRNAs (miRNAs) driven by electrostatic interaction (polyplexes). Quaternized ammonium groups were linked to pullulan backbone by adding the reactive glycidyltrimethylammonium chloride (GTMAC). The presence of these cationic groups within the pullulan was confirmed by elemental analysis, Fourier-transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (1H NMR). The alkylated pullulan was able to interact with miRNA and form stable polyplexes that were characterized regarding size, zeta potential and morphology. The presence of miRNA was confirmed by agarose gel electrophoresis and UV spectrophotometry. In vitro tests on human umbilical vein endothelial cells did not show any cytotoxicity after 1 day of incubation with nanosized polyplexes up to 200 µg/mL. QA-pullulan was able to promote miRNA delivery inside cells as demonstrated by fluorescence microscopy images of labelled miRNA. In conclusion, the formation of polyplexes using cationic derivatives of pullulan with miRNA provided an easy and versatile method for polysaccharide nanoparticle production in aqueous media and could be a new promising platform for gene delivery.

The conundrum of dietary antioxidants in cancer chemotherapy.

Although chemotherapy succeeds in reducing tumor burden, the efficacy is limited due to acquired drug resistance and often irreparable side effects. Studies show that antioxidants may influence the response to chemotherapy and its side effects, although their use remains controversial. The evidence shows that some chemo-drugs induce oxidative stress and lead to normal tissue apoptosis and the entry of cancer cells to a dormant G0 state. Through the suppression of oxidative stress, antioxidants could protect normal cells and bring the tumor out of dormancy so as to expose it to chemotherapies. This review is focused on the redox biology of cancer/normal cells and association of reactive oxygen species with drug resistance, cancer dormancy, and side effects. To this end, evidence from cellular, animal, and clinical studies is provided to better understand the conundrum of dietary antioxidants in cancer chemotherapy.

Mitigation of monocyte driven thrombosis on cobalt chrome surfaces in contact with whole blood by thin film polar/hydrophobic/ionic polyurethane coatings.

Monocytes are active at the crossroads between inflammation and coagulation processes since they can secrete pro-inflammatory cytokines and express tissue factor (TF), a major initiator of coagulation. Cobalt-chrome (CoCr), a metal alloy, used as a biomaterial for vascular stents, has been shown to be potentially pro-thrombotic and pro-inflammatory. Research work with a polymer from a family of degradable-polar hydrophobic ionic polyurethanes (D-PHI), called HHHI, has been shown to exhibit anti-inflammatory responses from human monocytes. We have generated multifunctional polyurethane thin films (MPTF) based on the HHHI chemistry, as a thin coating for CoCr and have evaluated the reactivity of blood with MPTF-coated CoCr. The results showed that the coating of CoCr with MPTF derived from HHHI prevents thrombin generation, reduces coagulation activation, and suppresses fibrin formation in whole blood. Activation of monocytes was also suppressed at the surface of MPTF-coated CoCr and specifically the decrease in thrombin generation was accompanied by a significant decrease in TF and pro-inflammatory cytokine levels. Mass spectroscopy of the adsorbed proteins showed lower levels of fibrinogen, fibronectin and complement C3, C4, and C8 when compared to CoCr. We can conclude that MPTFs reduce the pro-thrombotic and pro-inflammatory phenotype of monocytes and macrophages on CoCr, and prevent clotting in whole blood.

Astaxanthin Complexes to Attenuate Muscle Damage after In Vivo Femoral Ischemia-Reperfusion.

(1) Background: Reperfusion injury refers to the cell and tissue damage induced, when blood flow is restored after an ischemic period. While reperfusion reestablishes oxygen supply, it generates a high concentration of radicals, resulting in tissue dysfunction and damage. Here, we aimed to challenge and achieve the potential of a delivery system based on astaxanthin, a natural antioxidant, in attenuating the muscle damage in an animal model of femoral hind-limb ischemia and reperfusion. (2) Methods: The antioxidant capacity and non-toxicity of astaxanthin was validated before and after loading into a polysaccharide scaffold. The capacity of astaxanthin to compensate stress damages was also studied after ischemia induced by femoral artery clamping and followed by varied periods of reperfusion. (3) Results: Histological evaluation showed a positive labeling for CD68 and CD163 macrophage markers, indicating a remodeling process. In addition, higher levels of Nrf2 and NQO1 expression in the sham group compared to the antioxidant group could reflect a reduction of the oxidative damage after 15 days of reperfusion. Furthermore, non-significant differences were observed in non-heme iron deposition in both groups, reflecting a cell population susceptible to free radical damage. (4) Conclusions: Our results suggest that the in situ release of an antioxidant molecule could be effective in improving the antioxidant defenses of ischemia/reperfusion (I/R)-damaged muscles.

Coating of cobalt chrome substrates with thin films of polar/hydrophobic/ionic polyurethanes: Characterization and interaction with human immunoglobulin G and fibronectin.

Biomaterial implants often lead to specific tissue reactions that could compromise their bio-integration and/or optimal cellular interactions. Polyurethanes (PU) are of particular interest as coatings to mask CoCr's bioactivity, since they are generally more biocompatible than metal substrates, present a broad range of chemistry, and have highly tunable-mechanical properties. In the current work, complex polyvinyl-urethanes (referred to as D-PHI materials) are studied for their surface phase structures: specifically, an original D-PHI polymer (O-D-PHI) and a differential formulation with relatively higher hydrophobic and ionic content (HHHI) are of interest. The PUs are diluted in tetrahydrofuran (THF) to generate thin films which differentially influence the physical and chemical properties of the D-PHI coatings. AFM images over time show the gradual appearance of domains exhibiting crystalline organisation, and whose shape and size were dependent on D-PHI thickness (thin films vs non-solvent cast resin materials). After three weeks, a complete stabilization of the crystal state is observed. The thin coatings are stable in an aqueous and 37 °C environment. The adsorption of two human plasmatic proteins Immunoglobulin G (IgG) and Fibronectin (Fn), involved in inflammation and coagulation, was studied. The exposure of specific protein sequences (IgG-Fab, Fn-Cell Binding Domain and Fn-N-terminal domain) were dramatically reduced on both D-PHI materials when compared to bare metal CoCr. The implications of these findings would be relevant to defining coating strategies used to improve the blood clotting and immune cell reactivity to CoCr implant materials.

Mouse Wnt1-CRE-RosaTomato Dental Pulp Stem Cells Directly Contribute to the Calvarial Bone Regeneration Process.

Stem cells endowed with skeletogenic potentials seeded in specific scaffolds are considered attractive tissue engineering strategies for treating large bone defects. In the context of craniofacial bone, mesenchymal stromal/stem cells derived from the dental pulp (DPSCs) have demonstrated significant osteogenic properties. Their neural crest embryonic origin further makes them a potential accessible therapeutic tool to repair craniofacial bone. The stem cells' direct involvement in the repair process versus a paracrine effect is however still discussed. To clarify this question, we have followed the fate of fluorescent murine DPSCs derived from PN3 Wnt1-CRE- RosaTomato mouse molar (T-mDPSCs) during the repair process of calvaria bone defects. Two symmetrical critical defects created on each parietal region were filled with (a) dense collagen scaffolds seeded with T-mDPSCs, (b) noncellularized scaffolds, or (c) no scaffold. Mice were imaged over a 3-month period by microcomputed tomography to evaluate the extent of repair and by biphotonic microscopy to track T-mDPSCs. Histological and immunocytochemical analyses were performed in parallel to characterize the nature of the repaired tissue. We show that T-mDPSCs are present up to 3 months postimplantation in the healing defect and that they rapidly differentiate in chondrocyte-like cells expressing all the expected characteristic markers. T-mDPSCs further maturate into hypertrophic chondrocytes and likely signal to host progenitors that form new bone tissue. This demonstrates that implanted T-mDPSCs are able to survive in the defect microenvironment and to participate directly in repair via an endochondral bone ossification-like process. Stem Cells 2019;37:701-711.

Early angiogenesis detected by PET imaging with 64Cu-NODAGA-RGD is predictive of bone critical defect repair.

Therapies using stem cells may be applicable to all fields of regenerative medicine, including craniomaxillofacial surgery. Dental pulp stem cells (DPSCs) have demonstrated in vitro and in vivo osteogenic and proangiogenic properties. The aim of the study was to evaluate whether early angiogenesis investigated by nuclear imaging can predict bone formation within a mouse critical bone defect. Two symmetrical calvarial critical-sized defects were created. Defects were left empty or filled with i) DPSC-containing dense collagen scaffold, ii) 5% hypoxia-primed DPSC-containing dense collagen scaffold, iii) acellular dense collagen scaffold, or iv) left empty. Early angiogenesis assessed by PET using 64Cu-NODAGA-RGD as a tracer was found to be correlated with bone formation determined by micro-CT within the defects from day 30, and to be correlated to the late calcium apposition observed at day 90 using 18F-Na PET. These results suggest that nuclear imaging of angiogenesis, a technique applicable in clinical practice, is a promising approach for early prediction of bone grafting outcome, thus potentially allowing to anticipate alternative regenerative strategies. STATEMENT OF SIGNIFICANCE: Bone defects are a major concern in medicine. As life expectancy increases, the number of bone lesions grows, and occurring complications lead to a delay or even lack of consolidation. Therefore, to be able to predict healing or the absence of scarring at early times would be very interesting. This would not "waste time" for the patient. We report here that early nuclear imaging of angiogenesis, using 64Cu-NODAGA-RGD as a tracer, associated with nuclear imaging of mineralization, using 18F-Na as a tracer, is correlated to late bone healing objectivized by classical histology and microtomography. This nuclear imaging represents a promising approach for early prediction of bone grafting outcome in clinical practice, thus potentially allowing to anticipate alternative regenerative strategies.

Effect of cross-linking on the physicochemical and in vitro properties of pullulan/dextran microbeads.

Hydrogels are very promising for tissue engineering as they provide scaffolds and a suitable microenvironment to control cell behavior and tissue regeneration. We used a patented method to obtain beads of pullulan/dextran cross-linked with sodium trimetaphosphate (STMP), that were already described for in vivo bone repair. The aim of this study was to provide a comparative analysis of microbeads made of polysaccharides prepared using three different STMP feeding ratio of 1.5, 2.25 or 3 % w/w. The morphology, swelling and biodegradability of these structures were assessed. Mesenchymal stem cells were also seeded to evaluate the cell organization onto the beads. We found that the amount of phosphorus resulting from the cross-linking was proportional to the introduced STMP concentration. An increase of cross-linking decreased the in vitro enzymatic degradability, and also decreased the swelling in PBS or water. The microstructures observed by SEM and confocal microscopy indicated that homogeneous spherical microbeads were obtained, except for the lower cross-linking ratio where the shapes were altered. Beads hydrated in PBS exhibited a mean diameter ranging from 400 to 550 µm with the decrease of STMP ratio. Cells adhered to the surface of microbeads even in the absence of protein coating. Cell viability studies revealed an increase in cell numbers over two weeks for the highest cross-linked beads, whereas the two lowest STMP concentrations induced a decrease of cell viability. Overall, this study demonstrated that pullulan/dextran hydrogels can be designed as microbeads with adjustable physicochemical and biological properties to fulfill requirements for tissue engineering approaches.

Influence of the three-dimensional culture of human bone marrow mesenchymal stromal cells within a macroporous polysaccharides scaffold on Pannexin 1 and Pannexin 3.

Because cell interactions play a fundamental role for cell differentiation, we investigated the expression of Pannexin 1 and Pannexin 3 in human bone marrow mesenchymal stromal cells (HBMSCs) in a three-dimensional (3D) microenvironment provided by a polysaccharide-based macroporous scaffold. The pannexin (Panx) family consists of three members, Panx1, Panx2, and Panx3. The roles of Panx large-pore ion and metabolite channels are recognized in many physiological and pathophysiological scenarios, but the role of these proteins in human physiological processes is still under investigation. Our study demonstrates that HBMSCs cultured within 3D scaffolds have induced Panx1 and Panx3 expression, compared with two-dimensional culture and that the Panx3 gene expression profile correlates with those of bone markers on mesenchymal stromal cells culture into the 3D scaffold. We showed that Panx1 is involved in the HBMSCs 3D cell-cell organization, as acting on the size of cellular aggregates, demonstrated by the use of Probenecid and the mimetic peptide 10panx1 as specific inhibitors. Inhibition of Panx3 using siRNA strategy shows to reduce the expression of osteocalcin as osteoblast-specific marker by HBMSCs cultured in 3D conditions, suggesting a role of this Panx in osteogenesis. Moreover, we evaluated Panx1 and Panx3 expression within the cellularized scaffolds upon subcutaneous implantation in NOG (NOD/Shi-scid/IL-2Rγnull ) mice, where we could observe a more intense expression in the constructs than in the surrounding tissues in vivo. This study provides new insights on the expression of pannexins in HBMSCs on a 3D microenvironment during the osteogenic differentiation, in vitro and in vivo.

A New Synthetic Model for Microvascular Anastomosis Training? A Randomized Comparative Study Between Silicone and Polyvinyl Alcohol Gelatin Tubes.

INTRODUCTION: Assessment of a resident's microsurgical competency with the rodent model remains the current gold standard. However, cost and ethical issues related to animal welfare may limit training opportunities. Therefore, synthetic alternatives such as silicone tubes have been developed to provide easy access to training, shorten the learning curve, and have been incorporated into microsurgical courses as a low-fidelity model for basic skills acquisition. This study compares the use of polyvinyl alcohol (PVA) gelatin tubes with silicone for resident microsurgical training. MATERIAL AND METHODS: Residents were randomized into silicone (S) or PVA (P) groups and underwent the same training. Following basic instruction, microsurgical anastomoses were performed with the rat's aorta or carotid artery or both. Performance was assessed using the Objective Structured Assessment of Technical Skills (OSATS) score and 5 different items to assess the quality of the anastomosis. Posttest questionnaires were also conducted for qualitative assessment of both students' and trainers' experience with silicone and PVA in comparison with rat vessels. RESULTS: OSATS score in Group P was higher than Group S (18.2 ± 2.6 vs 16.6 ± 2.5, p = 0.015). Results of anastomoses were similarly better in Group P based on OSATS score (19.3 ± 1.2 vs 17.7 ± 0.7, p = 0.027). Subjectively, both students and trainers found that PVA tubes resembled the rat aorta more closely than silicone. The number of rats used was also significantly lower in Group P than Group S (65 vs 75 total, p = 0.023). CONCLUSION: PVA gelatin tubes may be a viable alternative to silicone for microsurgical training because this synthetic model mirrors better rat vessels and can improve training performance based on objective assessment while using less animals overall.

Cardiovascular Bio-Engineering: Current State of the Art.

Despite the introduction of new drugs and innovative devices contributing in the last years to improve patients' quality of life, morbidity and mortality from cardiovascular diseases remain high. There is an urgent need for addressing the underlying problem of the loss of cardiac or vascular tissues and therefore developing new therapies. Autologous vascular transplants are often limited by poor quality of donor sites and heart organ transplantation by donor shortage. Vascular and cardiac tissue engineering, whose aim is to repair or replace cardiovascular tissues by the use of cells, engineering and materials, as well as biochemical and physicochemical factors, appears in this scenario as a promising tool to repair the damaged hearts and vessels. We will present a general overview on the fundamentals in the area of cardiac and vascular tissue engineering as well as on the latest progresses and challenges.

[Tissue engineering: a multidisciplinary approach]. / Ingénierie tissulaire - Une approche multidisciplinaire.

The prostheses have been around for thousands of years. Initially, it was substitute materials to replace members (leg, foot, hand) or for surgery (suture). The materials used have evolved, but they had never been created for medical applications. Recently, other strategies have emerged to construct or repair tissues. They are based on the use of biological components such as proteins or cells and provide a biological dimension to the term "biomaterial" and they often involve engineering. We illustrate the tissue engineering approaches using the examples of muscle and vessel regeneration strategies in the frame of restorative medicine.