RESUMO
In recent years, the incidence of bone defects has been increasing year by year. Bone transplantation has become the most needed surgery after a blood transfusion and shows a rising trend. Three-dimensional-printed implants can be arbitrarily shaped according to the defects of tissues and organs to achieve perfect morphological repair, opening a new way for non-traumatic repair and functional reconstruction. In this paper, strontium-doped mineralized collagen was first prepared by an in vitro biomimetic mineralization method and then polylactic acid was homogeneously blended with the mineralized collagen to produce a comprehensive bone repair scaffold by a gas extrusion 3D printing method. Characterization through scanning electron microscopy, X-ray diffraction, and mechanical testing revealed that the strontium-functionalized composite scaffold exhibits an inorganic composition and nanostructure akin to those of human bone tissue. The scaffold possesses uniformly distributed and interconnected pores, with a compressive strength reaching 21.04 MPa. The strontium doping in the mineralized collagen improved the biocompatibility of the scaffold and inhibited the differentiation of osteoclasts to promote bone regeneration. This innovative composite scaffold holds significant promise in the field of bone tissue engineering, providing a forward-thinking solution for prospective bone injury repair.
RESUMO
A simple and novel method for the deposition of polypyrrole (PPy) and cellulose nanocrystal (CNC) composites on different fiber substrates by reactive ink-jet printing was proposed. PPy/CNCs composites were successfully prepared, and the surface resistance of conductive layer deposited on different fiber substrates is the least when the monomer concentration is 0.6 M. PPy/CNCs were deposited on polyethylene terephthalate (PET) to form a conductive layer by adding polyvinyl alcohol (PVA), and the optimum sintering temperature is 100 °C (monomer/PVA ratio 4.0, conductivity 0.769 S cm-1). The PPy/CNCs conductive layer deposited on the paper has the lowest surface resistance and the best adhesion, and the surface resistance of PPy/CNCs conductive layer decreases first and then increases with the increase of sulfonate concentration. Moreover, the volume of anion in sulfonate will affect the arrangement and aggregation of PPy molecular chain in composite materials. Appropriate sulfonate doping can improve the conductivity and stability of conductive paper, and the maximum conductivity is 0.813 S cm-1. Three devices based on PPy/CNCs conductive paper were proposed and fabricated. Therefore, this ink-jet printing provides a new method for the preparation of conductive materials, sensors, energy storage and electromagnetic shielding, etc.
RESUMO
Spurred on by advances in materials chemistry and nanotechnology, scientists have developed many novel nanopreparations for cancer diagnosis and therapy. To treat complex malignant tumors effectively, multifunctional nanomedicines with targeting ability, imaging properties and controlled drug release behavior should be designed and exploited. The therapeutic efficiency of loaded drugs can be dramatically improved using redox-responsive nanoplatforms which can sense the differences in the redox status of tumor tissues and healthy ones. Redox-sensitive nanocarriers can be constructed from both organic and inorganic nanomaterials; however, at present, drug delivery nanovectors progressively lean towards inorganic nanomaterials because of their facile synthesis/modification and their unique physicochemical properties. In this review, we focus specifically on the preparation and application of redox-sensitive nanosystems based on mesoporous silica nanoparticles (MSNs), carbon nanomaterials, magnetic nanoparticles, gold nanomaterials and other inorganic nanomaterials. We discuss relevant examples of redox-sensitive nanosystems in each category. Finally, we discuss current challenges and future strategies from the aspect of material design and practical application.
Assuntos
Nanoestruturas/química , Nanoestruturas/uso terapêutico , Nanomedicina Teranóstica , Animais , Carbono/química , Carbono/uso terapêutico , Ouro/química , Ouro/uso terapêutico , Humanos , Fenômenos Magnéticos , Oxirredução , Dióxido de Silício/química , Dióxido de Silício/uso terapêuticoRESUMO
Electrode materials play a vital role in the development of electrochemical immunosensors (EIs), particularly of label-free EIs. In this study, composites containing reduced graphene oxide with silver nanoparticles (rGO/Ag NPs) were synthesized using binary reductants, i.e. hydrazine hydrate and sodium citrate. Due to the fact that graphene oxide (GO) was fully restored to rGO, and rGO stacking was effectively inhibited by insertion of small Ag NPs between the graphene sheets, the electrical conductivity of rGO/Ag NPs composites was significantly improved compared to rGO alone, with an enhancement factor of 346% at 40wt% of rGO. Moreover, the conducting path between rGO and Ag NPs formed because the structural defects in rGO were effectively repaired by decoration with Ag NPs. Subsequently, based on a screen-printed three-electrode system, a label-free EI for detecting prostate-specific antigen (PSA) was constructed using rGO/Ag NPs composites as a support material. The fabricated EIs demonstrated a wide linear response range (1.0-1000ng/ml), low detection limit (0.01ng/ml) and excellent specificity, reproducibility and stability. Thus, the proposed EIs based on rGO/Ag NPs composites can be easily extended for the ultrasensitive detection of different protein biomarkers.
Assuntos
Técnicas Eletroquímicas/métodos , Grafite/química , Imunoensaio/métodos , Nanocompostos/química , Antígeno Prostático Específico/sangue , Prata/química , Anticorpos Imobilizados/química , Técnicas Biossensoriais/instrumentação , Técnicas Biossensoriais/métodos , Técnicas Eletroquímicas/instrumentação , Eletrodos , Desenho de Equipamento , Humanos , Imunoensaio/instrumentação , Limite de Detecção , Nanopartículas Metálicas/química , Nanopartículas Metálicas/ultraestrutura , Modelos Moleculares , Nanocompostos/ultraestrutura , Óxidos/química , Reprodutibilidade dos TestesRESUMO
Our previous work showed that a charge-reversal layer-by-layer nanosystem, PEI/PAH-Cit/AuNP-CS, effectively facilitates cellular uptake of siRNA and enhances the silencing efficacy of MDR1 siRNA. Here, the plasmid loading capacity of this vehicle was examined using EGFP-N1, and the plasmid release profile was determined in response to pH changes. The cytotoxicity of the EGFP-N1/PEI/PAH-Cit/AuNP-CS complex against HeLa and 293T cells was almost negligible. PEI/PAH-Cit/AuNP-CS efficaciously delivered the plasmids EGFP-N1 (encoding green fluorescent protein) and pGL3.0 (encoding luciferase) into 293T and HeLa cells, thus verifying the universality of PEI/PAH-Cit/AuNP-CS as a gene carrier. The results of an inverted fluorescence microscopy, flow cytometry (FCM) and western blotting methods demonstrated that PC-3 prostate cancer cells treated with EGFP-p53/PEI/PAH-Cit/AuNP-CS expressed higher levels of GFP than cells treated with EGFP-p53/PEI. Furthermore, PC-3 cells treated with EGFP-p53/PEI/PAH-Cit/AuNP-CS showed reduced cellular viability and increased nuclear fragmentation, consistent with elevated p53 expression. Propidium iodide (PI) flow cytometric assays were conducted to demonstrate that EGFP-p53/PEI/PAH-Cit/AuNP-CS elevated the level of apoptosis in PC-3 cells. Western blotting and caspase activation studies revealed that EGFP-p53/PEI/PAH-Cit/AuNP-CS complexes may induce PC-3 apoptosis via the mitochondria-mediated signaling pathway by up-regulation of Bax, down-regulation of Bcl-2, and activation of caspase-3.