RESUMO
The sea area around the Orkney archipelago, Scotland is subjected to substantial maritime shipping activities. By contract, the Svalbard archipelago, Norway currently has a rather low marine traffic profile. Future projections, however, indicate that the Trans-Arctic route might change the whole transportation picture and Svalbard may be at the centre of maritime activities. Both archipelagos have sensitive environmental resources at sea and inland, including bird communities. There are, for instance, 13 Red Listed species present in Orkney and 2 in Svalbard. In this regard, it is important to address oil spill risks along existing and projected shipping routes. Hypothetical spills were simulated in twelve scenarios for both the Orkney and Svalbard archipelagos with the OpenDrift open-source software. The results indicate risks to seabird communities. For Orkney, the spills resulted in the most extensive contamination of the sea and land environments in autumn. For Svalbard, autumn spills on the contrary presented the lowest risk to seabirds. Based on the simulations, we recommend increased caution for shipping activities in the problematic seasons, improved local readiness for ship accidents and sufficient pre-incident planning.
Assuntos
Poluição por Petróleo , Animais , Svalbard , Noruega , Acidentes , AvesRESUMO
Construction of colloidal nanoparticles (NPs) into advanced functional nanocomposites and hybrids with the predesigned hierarchical structure and high-performance is attractive, especially for natural biological nanomaterials, such as proteins and polysaccharides. Herein, a simple and sustainable approach called interfacial NP complexation (INC) was applied to construct diverse functional (conductive, drug-loaded, or antimicrobial) nanocomposite filaments from oppositely charged colloidal nanocelluloses. By incorporating different additives during the INC process, including multiwalled carbon nanotube, an antitumor drug (doxorubicin hydrochloride), and metal (silver) NPs (Ag NPs), high-performance functional continuous filaments were synthesized, and their potential applications in electronics, drug delivery, and antimicrobial materials were investigated, respectively. This novel INC method based on charged colloidal NPs opens new avenues for building various functional filaments for a diversity of end uses.
Assuntos
Sistemas de Liberação de Medicamentos , Liberação Controlada de Fármacos , Nanopartículas Metálicas/química , Nanotubos de Carbono/química , Prata/química , Anti-Infecciosos/síntese química , Anti-Infecciosos/química , Antineoplásicos/química , Antineoplásicos/farmacologia , Doxorrubicina/química , Doxorrubicina/farmacologia , Condutividade Elétrica , Humanos , Neoplasias/tratamento farmacológico , Neoplasias/patologiaRESUMO
Cellulose nanocrystals (CNCs) are promising bio-derived nanomaterials for the bottom-up fabrication of biomedical constructs. In this report, dicarboxylic acid-functionalized CNC (DCC) was functionalized with arginylglycylaspartic acid (RGD) tripeptide as a motif for improved cell adhesion and targeting. The product (DCC-RGD) self-assembled into a more elongated nanofibrillar structure through lateral and end-to-end association. When added into poly(ethylene imine) (PEI)/pDNA polyplex solution, nanocelluloses interacted electrostatically with positively charged polyplexes without affecting their integrity. The constructs were tested for their potentials as non-viral transfection reagents. Cell viability and transfection efficiency of fibroblast NIH3T3 cells were monitored as a function of CNC concentration where, in general, viability increased as the CNC concentration increased, and transfection efficiency could be optimized. Using wild-type MDCK and αV-knockout MDCK cells, the construct was able to provide targeted uptake of polyplexes. The findings have potential applications, for example, cell-selective in vitro or ex vivo transfection of autologous mesenchymal stem cells for cell therapy, or bottom-up design of future innovative biomaterials.
Assuntos
Celulose/química , DNA/química , Iminas/química , Nanofibras/química , Nanopartículas/química , Oligopeptídeos/química , Polietilenos/química , Animais , Sobrevivência Celular/efeitos dos fármacos , Células Cultivadas , Ácidos Dicarboxílicos/química , Ácidos Dicarboxílicos/farmacologia , Cães , Relação Dose-Resposta a Droga , Células Madin Darby de Rim Canino , Camundongos , Estrutura Molecular , Células NIH 3T3 , Oligopeptídeos/farmacologia , Tamanho da Partícula , Plasmídeos , Propriedades de SuperfícieRESUMO
Herein, we report the fabrication of a polyion complex hydrogel from two oppositely charged derivatives of cellulose nanofibrils (CNF). CNF was produced from dissolving pulp through subsequent periodate oxidation, chemical modification, and microfluidization. Three different durations for periodate oxidation (30â¯min, 120â¯min, and 180â¯min) resulted in three different aldehyde contents. Further, two types of chemical modifications were introduced to react with the resulting aldehydes: chlorite oxidation to yield anionic CNF with carboxylic acid groups (DCC) and imination with Girard's reagent T to yield cationic CNF containing quaternary ammonium groups (CDAC). Functional group contents were assessed using conductometric titration and elemental analysis, while nanofibril morphologies were assessed using atomic force microscopy (AFM). Longer durations of periodate oxidation did not yield different width profile but was found to decrease fibril length. The formation of self-standing hydrogel through mixing of DCC and CDAC dispersions was investigated. Oscillatory rheology was performed to assess the relative strengths of different gels. Self-standing hydrogels were obtained from mixture of DCC180 and CDAC180 dispersions in acetate buffer at pH 4 and 5 at a low concentration of 0.5% w/w that displayed approximately 10-fold increase in storage and loss moduli compared to those of the individual dispersions. Self-standing gels containing doxorubicin (an anticancer drug) displayed pH-responsive release profiles. At physiological pH 7.4, approximately 65% of doxorubicin was retained past a burst release regime, while complete release was observed within 5â¯days at pH 4. Biocompatibility of DCC180, CDAC180, and their mixture were investigated through quantification of the metabolic activity of NIH3T3 cells in vitro. No significant cytotoxicity was observed at concentrations up to 900⯵g/mL. In short, the nanocellulose-based polyion complex hydrogels obtained in this study are promising nature-derived materials for biomedical applications. STATEMENT OF SIGNIFICANCE: We demonstrate that polyion complex can be formed between two cellulose nanofibrils containing complementary charges. To the best of our knowledge, this is the first time that polyion complex formation between complementarily-modified cellulose nanofibrils has been reported, and the results may lead to new ideas on applications of the very promising nanocellulosic materials. The polyion complex helps form a self-standing network that is demonstrated to provide controlled and pH-responsive release of doxorubicin. Particularly, the report explores the connection between the physical properties of functionalizable nanocellulosic materials and their potential biomedical applications. Thus, the study encompasses several broad fields of materials science and engineering, chemistry, and biomedical science that we believe is in line with the readers' interests.
Assuntos
Celulose , Doxorrubicina , Hidrogéis , Nanofibras , Animais , Celulose/química , Celulose/farmacocinética , Celulose/farmacologia , Preparações de Ação Retardada/química , Preparações de Ação Retardada/farmacocinética , Preparações de Ação Retardada/farmacologia , Doxorrubicina/química , Doxorrubicina/farmacocinética , Doxorrubicina/farmacologia , Hidrogéis/química , Hidrogéis/farmacocinética , Hidrogéis/farmacologia , Concentração de Íons de Hidrogênio , Camundongos , Células NIH 3T3 , Nanofibras/química , Nanofibras/uso terapêutico , Relação Estrutura-AtividadeRESUMO
Superabsorbents are highly appealing materials for use in cleaning up oil and chemical spills. However, the development of a low-cost, highly efficient superabsorbent remains a major challenge. This paper demonstrates a straightforward method of producing a cellulose nanofibril aerogel that is low-cost, ultralight, highly porous, hydrophobic, and reusable superabsorbing cellulose nanofibril aerogel from recycled waste fibers using a simple, environmentally friendly nanofibrillation treatment involving deep eutectic solvent and freeze-drying. Nanofibrillation and hydrophobic modification (silylation) of waste cellulose fibers resulted in nanofibril sponges with ultralow density (0.0029 g/cm3) and high porosity (up to 99.81%) after freeze-drying. These sponges exhibited excellent absorption performances for various oils and organic solvents and were reusable. In particular, the nanofibril aerogels showed selectivity in absorbing marine diesel oil from an oil-water mixture and possessed ultrahigh absorption capacities of up to 142.9 g/g, much higher than those of the commercial absorbent materials (i.e., polypropylene-based material) (8.1-24.6 g/g) that were used as references. The absorbed oil could easily be recovered by means of simple mechanical squeezing. In addition, the nanofibril sponges exhibited excellent reusability, maintaining a high capacity to absorb diesel oil for at least 30 cycles at 71.4-81.0% of capacity compared to a fresh absorbent. The above-mentioned advantages make cellulose nanofibril superabsorbents created from recycled waste cellulose fibers promising material for cleaning oil and chemical spills.
RESUMO
A chemical pretreatment for producing cellulose nanocrystals (CNCs) with periodate oxidation and reductive amination is reported. This new functionalization of cellulose fibers dispenses an alternative method for fabricating individual CNCs without the widely used acid hydrolysis process. CNCs can be directly modified during the pretreatment step, and no additional post-treatments are required to tune the surface properties. Three butylamine isomers were tested to fabricate CNCs with amphiphilic features. After mechanical homogenization, CNCs occurred as individual crystallinities without aggregation where high uniformity in terms of shape and size was obtained. The elemental analysis and (1)H NMR measurement show that iso- and n-butylamine attach the highest number of butylamino groups to the cellulose fibers. Linking the alkyl groups increases the hydrophobic nature of the CNCs, where water contact angles from self-standing films up to 110.5° are reported. Since these butylamino-functionalized CNCs have hydrophobic characteristics in addition to the hydrophilic backbone of cellulose, the stabilization impact on oil/water emulsions is demonstrated as a potential application.
Assuntos
Celulose/química , Nanopartículas/química , Tensoativos/química , Butilaminas/química , Cristalografia por Raios X , Emulsões , Interações Hidrofóbicas e Hidrofílicas , Oxirredução , Óleo de Soja/química , Viscosidade , Água/químicaRESUMO
Hybrid organic-inorganic films mimicking natural nacre-like composite structures were fabricated from cellulose nanofibers obtained from sequential periodate-chlorite oxidation treatment and talc platelets, using a simple vacuum-filtration method. As a pretreatment, commercial talc aggregates were individualized into well-dispersed talc platelets using a wet stirred media mill with high-shear conditions to promote the homogeneity and mechanical characteristics of hybrids. The nanofiber-talc hybrids, which had talc contents from 1 to 50 wt %, were all flexible in bending, and possessed tensile strength and Young's modulus values up to 211 ± 3 MPa and 12 ± 1 GPa, respectively, the values being remarkably higher than those reported previously for nanofibrillated cellulose-talc films. Because of the lamellar and well-organized structure of hybrids in which the talc platelets were evenly embedded, they possessed a small pore size and good oxygen barrier properties, as indicated by the preliminary results. The talc platelets decreased the moisture adsorption of highly talc-loaded hybrids, although they still exhibited hydrophilic surface characteristics in terms of contact angles.