Combined toxicity of microplastics and copper on Goniopora columns.

As microplastics (MP) become ubiquitous, their interactions with heavy metals threatens the coral ecosystem. This study aimed to assess the combined toxicity of MP and copper (Cu) in the environment of coral. Goniopora columna was exposed to polyethylene microplastics (PE-MP) combined with Cu2+ at 10, 20, 50, 100, and 300 µg/L for 7 days. Polyp length and adaptability were recorded daily, and coral samples were collected at 1, 3, 5, and 7 days to analyse zooxanthellae density and antioxidant activity. Tissue observations and the analysis of MP and Cu2+ accumulation were conducted on the 7th day. After 1 day of exposure, PE-MP combined with different concentrations of Cu2+ significantly decreased polyp length and adaptability compared with PE-MP alone. Simultaneously, a significant increase in malondialdehyde (MDA) content, lead to coral oxidative stress, which was a combined effect with PE-MP. After 3 days of exposure, PE-MP combined with Cu2+ at >50 µg/L significantly reduced zooxanthellae density, damaging the coral's symbiotic relationship. In antioxidant enzyme activity, superoxide dismutase (SOD) activity decreased significantly after 1 day of exposure. After 3 days of exposure, glutathione peroxidase (GPx) activity significantly increased with Cu2+ at >20 µg/L. After 5 days of exposure, PE-MP combined with different concentrations of Cu2+ significantly reduced catalase (CAT), glutathione (GSH), and glutathione transferase (GST) activity, disrupting the antioxidant enzyme system, and acting antagonistically to PE-MP alone. Tissue observations revealed that the PE-MP combined with Cu2+ at >50 µg/L caused severe mesenteric atrophy, vacuolar, and Cu2+ accumulation in the coral mesenteric compared with PE-MP alone. The results suggest that combined exposure of PE-MP and copper leads to more severe oxidative stress, disruption antioxidant enzyme system, tissue damage, and Cu2+ accumulation, resulting in a significant maladaptation of corals to the environment.

Impact of polyethylene microplastics on coral Goniopora columna causing oxidative stress and histopathology damages.

In recent years, the increase of microplastics in the sea exerted a negative impact on coral health. This study has been undertaken to analyze the impact of microplastics on corals. Here, Goniopora columna was exposed to different concentrations of polyethylene microplastics (PE-MP). The daily polyps length and adaptability were recorded. Analysis of the zooxanthellae density and antioxidant activity of coral was done after 1, 3, 5 and 7 days. Further tissue morphology and accumulation of PE-MP were analyzed. The results showed that PE-MP at different concentrations can be adsorbed on the surface of corals and enter inside corals after 7 days. PE-MP at different concentrations reduced polyps length, adaptability and cause the changes in the density of zooxanthellae to be the reason for unbalancing of corals. PE-MP at different concentrations reduced the superoxide dismutase (SOD) activity after exposure to 1 day. PE-MP increased the catalase (CAT) activity at 100 mg/L after exposure; even after reducing the concentration has the same effect. PE-MP at various concentrations increased the glutathione peroxidase (GPx) activity after exposure to 5 and 7 days. It also increased the glutathione transferase (GST) and glutathione (GSH) activity after exposure to 5 and 7 days. PE-MP at different concentrations increased the malondialdehyde (MDA) content after exposure from 1 to 7 days. Analysis of tissue morphology and tissue accumulation shows that different concentrations of PE-MP cause mesenteric atrophy, vacuole, and accumulation in the coral mesenteric. These results indicate that the PE-MP can impact the antioxidant system and hampers the function of enzymes responsible for detoxification of G. columna, increase lipid peroxide content and also cause tissue damage through accumulating in the coral mesenteric.

Evaluation of polycyclic aromatic hydrocarbons in silky sharks Carcharhinus falciformis collected from Western Indian Ocean and human health risk assessment.

The silky shark (Carcharhinus falciformis) is the most abundant and widely distributed shark species in the marine system of tropical regions. However, it appears that there is limited information on USEPA 16 polycyclic aromatic hydrocarbons (PAHs) concentration in silky shark muscle tissue, which has together with the lack of a health risk assessment of human consumption of silky shark filets. The potential toxicity of PAHs in muscles of silky sharks and cancer and non-cancer risk of consumers were assessed. Results showed that the total PAHs (TPAHs) concentration in the muscle tissue of silky sharks was between 62 and 657 ng/g ww, with an average of 234 ± 221 (mean ± standard deviation) ng/g ww, and can be considered as minimally to moderately contaminated level. Naphthalene (NA), phenanthrene (PH), and fluoranthene (FLU) are the most abundant PAHs in silky sharks muscle tissue, accounting for 38.6%, 11.0%, and 19.0% of TPAHs, respectively. The average values of toxic benzo[a]pyrene (BaP) equivalent (TEQcarc) and toxic dioxin equivalent (TEQfish) of PAHs equal to the potency of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) in silky shark muscle are 13.5 ± 16.4 ng BaP/g ww and 34.1 ± 77.4 pg TCDD/g ww, respectively, and they showed a good linear relationship (r = 0.928; p < 0.001). The TEQcarc of silky sharks muscle is higher than USEPA's screening value of PAHs of 3.2 ng BaP/g ww for adults, indicating a potential negative impact on public health. The calculated hazard index (HI) of PAHs is less than 1, suggesting that residents eating silky shark muscle will not expect to cause significant non-cancer risk. However, the incremental lifetime cancer risk (ILCR) of BaP as 10.6-26.3% and 8.2-32.4% in males and females, respectively, may pose a significant cancer risk. In general, children and the elderly have relatively higher risks, as well as males have a higher cancer and non-cancer risk than females.

Seasonal variation of diversity, weathering, and inventory of microplastics in coast and harbor sediments.

Spatiotemporal variations in the abundance of microplastics (MPs) in surface sediments along the southwestern coast of Taiwan (including harbor and coastal regions) were investigated and the diversity, degree of weathering, and inventory of MPs in the sediments further quantified. The spatiotemporal variations of MP characteristics were used to assess possible transport routes of MPs. Results indicated that the average MP abundance in the partially-enclosed harbor region was 79.3 MPs in 1 kg dry sediment (item/kg dw), which was 3-5 times higher than that in the coastal region. Average MP abundance during the dry season (36.5 ± 52.2 item/kg dw) was relatively higher than that during the wet season (22.3 ± 23.2 item/kg dw). The dominant MPs were small (0.1-1.0 mm, 90%), colored (62.3%), and consisted mainly of fibers (54.1%) and fragments (40.5%). Analysis by µFTIR revealed the presence of ten types of polymers in the MPs, with the most abundant being polypropylene (35.1%), rayon (33.2%), and polystyrene (10.0%). Values of the microplastic diversity integrated index (MPDII) indicated that MP diversity was greater in the harbor region (MPDII = 0.62) than in the coastal region (MPDII = 0.51-0.54), and greater during the wet season (MPDII = 0.60) than during the dry season (MPDII = 0.50). As indicated by values of the MP carbonyl index (CI), the MPs exhibited a high degree of oxidation (CI >0.31) that appeared unrelated to spatiotemporal variations. In the dry season, MP inventory was 12.2 tons and the wet season inventory was 8.1 tons. The hydrodynamic forces may be an influenced force for the spatiotemporal distribution patterns of the MPs in surface sediments. MPs could accumulate in the surface sediments during the dry season and resuspend in the wet season with the higher rainfall and then migrate towards the deep sea following the water flow.

Recycling dredged harbor sediment to construction materials by sintering with steel slag and waste glass: Characteristics, alkali-silica reactivity and metals stability.

This work recovered the dredged sediment around Kaohsiung Harbor, Taiwan, for preparing lightweight aggregates (LWA), of which physicochemical properties as affected by the addition of basic-oxygen-furnace (BOF) slag and waste glass were investigated. LWA properties included water absorption, particle density, compressive strength, shrinkage, and microstructure of sintered pellets were evaluated to ensure feasibility of dredged harbor sediment reutilization technique. Results showed that adding appropriate amount of glass powders (~7%) to the mixtures of sediment and slag significantly reduced the water absorption (as low as 2.2%) of the sintered pellets and increase the compressive strength (as high as 23.1 MPa) of LWA, which were found to be controlled by open porosity and shrinkage. Excessive addition of glass (>10%) led to increase in internal pore sizes of the sintered pellets, and thus reduced the compressive strength. The alkali-silica reactivity (ASR) of the LWA was innocuous according to the ASTM C289 test. Sintering and glass addition improved the stability of heavy metal and environmental compatibility of the LWA. The recycling of waste sediment, slag, and glass for LWA production can provide an alternative for the disposal of dredge harbor sediment and has positive impact on waste reduction, which not only can reduce secondary contamination to the environment, but also can contribute to circular economy.