The Accuracy of Guided Implant Surgery With Different Fields of View of Cone-Beam Computerized Tomography.

Although a smaller size field of view (FOV) of cone-beam computerized tomography (CBCT) reduces radiation exposure, its effect on the accuracy of static computer-aided implant surgery (s-CAIS) remains unknown. This study aimed to evaluate the impact of the size of FOV on the accuracy of s-CAIS and to investigate if the arch affects this effect. A total of 32 implant sites on 8 identical scannable models (maxillae and mandibles) were randomly allocated to 2 FOV sizes: test (5 × 5 cm) and control (10 × 10 cm). All models were scanned with an intraoral scanner (IOS). With the registration of the surface scan and CBCT image, a prosthetic-driven implant position was planned. Following the fabrication of surgical templates, a single-blinded surgeon placed all implants with the fully guided s-CAIS protocol. IOS captured the implant positions with the scan body attached. Implant-planning software measured the angular deviation, 3-dimensional (3D) deviation at the crest, and 3D deviation at the apex between preplanned and actual implant positions. Two-way analysis of variance was used to analyze the effect of FOV and arch on the deviations. The size of FOV did not show a significant effect (P > .198) on angular deviation, 3D deviation at the crest, or 3D deviation at the apex. No significant difference was found when comparing the effect of the size of FOV between the maxillary and mandibular implants. In conclusion, the use of small FOV CBCT demonstrated comparable accuracy of s-CAIS to the use of medium FOV CBCT.

ITI consensus report on zygomatic implants: indications, evaluation of surgical techniques and long-term treatment outcomes.

OBJECTIVES: The aim of the ITI Consensus Workshop on zygomatic implants was to provide Consensus Statements and Clinical Recommendations for the use of zygomatic implants. MATERIALS AND METHODS: Three systematic reviews and one narrative review were written to address focused questions on (1) the indications for the use of zygomatic implants; (2) the survival rates and complications associated with surgery in zygomatic implant placement; (3) long-term survival rates of zygomatic implants and (4) the biomechanical principles involved when zygoma implants are placed under functional loads. Based on the reviews, three working groups then developed Consensus Statements and Clinical Recommendations. These were discussed in a plenary and finalized in Delphi rounds. RESULTS: A total of 21 Consensus Statements were developed from the systematic reviews. Additionally, the group developed 17 Clinical Recommendations based on the Consensus Statements and the combined expertise of the participants. CONCLUSIONS: Zygomatic implants are mainly indicated in cases with maxillary bone atrophy or deficiency. Long-term mean zygomatic implant survival was 96.2% [95% CI 93.8; 97.7] over a mean follow-up of 75.4 months (6.3 years) with a follow-up range of 36-141.6 months (3-11.8 years). Immediate loading showed a statistically significant increase in survival over delayed loading. Sinusitis presented with a total prevalence of 14.2% [95% CI 8.8; 22.0] over a mean 65.4 months follow-up, representing the most common complication which may lead to zygomatic implant loss. The international experts suggested clinical recommendations regarding planning, surgery, restoration, outcomes, and the patient's perspective.

Complications related to digital technologies in treating edentulous patients with dental implants-Part II. Computer-guided surgery and prosthetic stages.

This is the second part of a JPD Digital presentation focusing on commonly seen complications and solutions related to using digital technologies in treating edentulous patients during the surgical and prosthetic stages. The proper usage of the computer-aided design and computer-aided manufacturing surgical templates and immediate loading prosthesis during computer-guided surgery and accurate translation of digital planning into clinical execution are discussed. In addition, design concepts of implant-supported complete fixed dental prostheses are presented to minimize subsequent issues in their long-term clinical service. In concert with these topics, this presentation will allow clinicians to deepen their understanding of the advantages and limitations of utilizing digital technologies in implant dentistry.

Enhanced Antibacterial Effect on Zirconia Implant Abutment by Silver Linear-Beam Ion Implantation.

Peri-implant lesions, such as peri-implant mucositis and peri-implantitis, are bacterial-derived diseases that happen around dental implants, compromising the long-term stability and esthetics of implant restoration. Here, we report a surface-modification method on zirconia implant abutment using silver linear-beam ion implantation to reduce the bacterial growth around the implant site, thereby decreasing the prevalence of peri-implant lesions. The surface characteristics of zirconia after ion implantation was evaluated using energy dispersive spectroscopy, X-ray photoelectron spectroscopy, and a contact-angle device. The antibacterial properties of implanted zirconia were evaluated using Streptococcus mutans and Porphyromonas gingivalis. The biocompatibility of the material surface was evaluated using human gingival fibroblasts. Our study shows that the zirconia surface was successfully modified with silver nanoparticles by using the ion-implantation method. The surface modification remained stable, and the silver-ion elution was below 1 ppm after one-month of storage. The modified surface can effectively eliminate bacterial growth, while the normal gingiva's cell growth is not interfered with. The results of the study demonstrate that a silver-ion-implanted zirconia surface possesses good antibacterial properties and good biocompatibility. The surface modification using silver-ion implantation is a promising method for future usage.

Bead-anchored surgical templates for static computer-assisted implant surgery: A dental technique.

This technique report describes an alternative method to stabilize surgical templates throughout full-arch static computer-assisted implant surgery (FA s-CAIS). In FA s-CAIS, remaining teeth, mucosa, existing implants, custom occlusal device, bone, or any combination thereof, could be used as an initial positioning mechanism to position surgical templates. Different anchoring mechanisms are then used to stabilize the surgical templates during surgery. In this report, a novel design of surgical templates using remaining dentition and opposing occlusal surfaces as initial positioning mechanism followed by the combination of bone block fixation screw and stainless-steel beads as secondary anchoring mechanisms is described. The advantages, limitations, and comparisons with surgical templates using other anchoring mechanisms are also discussed.

Using a Digital Dentistry Integrated Planning and Manufacturing Service in Completely Edentulous Treatment.

The use of an integrated digital planning and manufacturing modular service and a time-tested dental implant system to treat a completely edentulous patient, as shown in this case report, offers numerous clinical benefits. Computer-guided surgery and digital dentistry have gained in popularity and demonstrated great clinical success; however, clinicians and dental laboratory technicians can further maximize the benefit gained from these technologies through additional training and resource investment. By using the streamlining solution (Smile in a Box®, Straumann) described in a clinical step-by-step manner in this case report, dental professionals can provide effective digital solutions for improved patient treatment acceptance, experience, and satisfaction.

Addition of an irrigation channel to a surgical template to facilitate cooling during implant osteotomy.

The increased precision and design of surgical templates for static computer-aided implant surgery has led to concerns of excessive heat generation from the friction between the twist drills, metal sleeves in the surgical template, and guide handles during osteotomy preparation. In addition, the presence of a surgical template can prevent proper cooling of the twist drill as it enters the osteotomy site, leading to greater heat generation. This excessive heat may result in bone necrosis and failure of osseointegration to the implant surface. This article describes a straightforward technique of incorporating an existing design feature in many virtual implant planning software programs to add an irrigation channel to the implant surgical template for effective cooling during osteotomy preparation.

CAD-CAM cobalt-chromium surgical template for static computer-aided implant surgery: A dental technique.

A digital process for designing and manufacturing a cobalt-chromium (Co-Cr) surgical template for static computer-aided implant surgery (s-CAIS) is described. The use of Co-Cr provides the advantage of a material with improved mechanical properties to reduce the possibility of surgical template fracture during s-CAIS. The stronger material also allows for a thinner surgical template, which in turn allows better access when the interarch operative space is limited or a longer implant is inserted. Limitations of the technique include the need for computer-aided manufacturing technology and, with the use of Co-Cr, a higher overall cost.

Impact of caffeine on metabolic activity and biofilm formation of Candida albicans on acrylic denture resin in the presence of nicotine.

STATEMENT OF PROBLEM: Candida albicans has been implicated in denture stomatitis, and this effect is exacerbated by nicotine exposure. However, studies have also suggested that caffeine exposure inhibits the growth of C. albicans. The interaction effects of nicotine and caffeine are not yet clear on the growth of C. albicans. PURPOSE: The purpose of this in vitro study was to determine the effect of caffeine on metabolic activity and biofilm formation of C. albicans growing on acrylic denture resin while simultaneously exposed to nicotine and, if an effect were to be identified, whether this effect would vary depending on the caffeine concentration. MATERIAL AND METHODS: A total of 240 acrylic resin specimens were divided into 2 equal groups (120 each). Specimens in one group were processed to measure C. albicans metabolic activity, and those in the other group were processed to measure C. albicans biofilm attachment. Ten subgroups (n=12) were established within each group with different concentration combinations of nicotine and caffeine to test the interaction effect. The first subgroup was designed as a negative control, containing 0 mg/mL of nicotine and caffeine. The following subgroups all contained 8.00 mg/mL of nicotine, and the caffeine concentrations were prepared at the following 9 levels: 0, 0.25, 0.50, 1.00, 2.00, 4.00, 8.00, 16.00, and 32.00 mg/mL. Metabolic activity was measured by using a 2,3-bis (2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-carboxanilide (XTT) assay. Biofilm attachment was measured by using spiral plating and calculated in terms of the number of colony-forming units (CFUs)/mL. Descriptive statistics and a 2-way ANOVA were conducted to determine whether the concentrations of nicotine and caffeine used affected the biofilm attachment and metabolic activity of C. albicans (α=.05). RESULTS: The presence of 8 mg/mL of nicotine increased the metabolic activity and biofilm formation of C. albicans. When compared with the 0 mg/mL of caffeine and 8.00 mg/mL of nicotine group, caffeine from 1.00 to 4.00 mg/mL significantly increased C. albicans biofilm metabolic activity. Caffeine at 16.00 and 32.00 mg/mL significantly decreased C. albicans biofilm metabolic activity in the presence of 8 mg/mL of nicotine. Caffeine from 1.00 to 32.00 mg/mL significantly decreased the biofilm formation of C. albicans in the presence of 8 mg/mL of nicotine. CONCLUSIONS: The presence of 8 mg/mL of nicotine alone increased the metabolic activity and biofilm formation of C. albicans. In the presence of 8 mg/mL of nicotine with different caffeine concentrations, the results suggest that, overall, caffeine at higher concentrations (16 and 32 mg/mL) inhibited the metabolic activity and biofilm formation of C. albicans on acrylic denture resin most.

Consideration for Contemporary Implant Surgery.

The advancement of technology often provides clinicians and patients better clinical alternatives to achieve optimal treatment outcomes. Computer-guided options allow clinicians to realize the virtual prosthodontically driven surgical plan, facilitating more predictable implant placement. Although the use of technology does not mean the clinicians can forgo the fundamental treatment principles when treating a patient, proper assessment and diagnostic approach from prosthodontic, surgical, and radiographic perspectives are still essential for a successful clinical outcome. The purpose of this article is to review the fundamental concepts for the use of computer-guided surgery to facilitate prosthodontic treatment.

Creation of a 3-dimensional virtual dental patient for computer-guided surgery and CAD-CAM interim complete removable and fixed dental prostheses: A clinical report.

This clinical report proposes a digital workflow using 2-dimensional (2D) digital photographs, a 3D extraoral facial scan, and cone beam computed tomography (CBCT) volumetric data to create a 3D virtual patient with craniofacial hard tissue, remaining dentition (including surrounding intraoral soft tissue), and the realistic appearance of facial soft tissue at an exaggerated smile under static conditions. The 3D virtual patient was used to assist the virtual diagnostic tooth arrangement process, providing patient with a pleasing preoperative virtual smile design that harmonized with facial features. The 3D virtual patient was also used to gain patient's pretreatment approval (as a communication tool), design a prosthetically driven surgical plan for computer-guided implant surgery, and fabricate the computer-aided design and computer-aided manufacturing (CAD-CAM) interim prostheses.

Cone beam computed tomography imaging as a primary diagnostic tool for computer-guided surgery and CAD-CAM interim removable and fixed dental prostheses.

This article describes a digital workflow using cone beam computed tomography imaging as the primary diagnostic tool in the virtual planning of the computer-guided surgery and fabrication of a maxillary interim complete removable dental prosthesis and mandibular interim implant-supported complete fixed dental prosthesis with computer-aided design and computer-aided manufacturing technology. Diagnostic impressions (conventional or digital) and casts are unnecessary in this proposed digital workflow, providing clinicians with an alternative treatment in the indicated clinical scenario.

Digital approach to planning computer-guided surgery and immediate provisionalization in a partially edentulous patient.

This report describes a digital approach for computer-guided surgery and immediate provisionalization in a partially edentulous patient. With diagnostic data obtained from cone-beam computed tomography and intraoral digital diagnostic scans, a digital pathway of virtual diagnostic waxing, a virtual prosthetically driven surgical plan, a computer-aided design and computer-aided manufacturing (CAD/CAM) surgical template, and implant-supported screw-retained interim restorations were realized with various open-architecture CAD/CAM systems. The optional CAD/CAM diagnostic casts with planned implant placement were also additively manufactured to facilitate preoperative inspection of the surgical template and customization of the CAD/CAM-fabricated interim restorations.

Maxillary and mandibular immediately loaded implant-supported interim complete fixed dental prostheses on immediately placed dental implants with a digital approach: A clinical report.

This clinical report describes the treatment of maxillary and mandibular immediate implant placement and immediately loaded implant-supported interim complete fixed dental prostheses with a contemporary digital approach. The virtual diagnostic tooth arrangement eliminated the need for a customized radiographic template, and the diagnostic data collection required for computer-guided surgery (digital diagnostic impressions, digital photographs, and a cone beam-computed tomography [CBCT] scan) was completed in a single visit with improved workflow efficiency. Computer-aided design and computer-aided manufacturing (CAD/CAM)-fabricated surgical templates and interim prosthesis templates were made in a dental laboratory to facilitate computer-guided surgery and the immediate loading process.

Application of digital diagnostic impression, virtual planning, and computer-guided implant surgery for a CAD/CAM-fabricated, implant-supported fixed dental prosthesis: a clinical report.

This clinical report demonstrated the use of an implant-supported fixed dental prosthesis fabricated with a contemporary digital approach. The digital diagnostic data acquisition was completed with a digital diagnostic impression with an intraoral scanner and cone-beam computed tomography with a prefabricated universal radiographic template to design a virtual prosthetically driven implant surgical plan. A surgical template fabricated with computer-aided design and computer-aided manufacturing (CAD/CAM) was used to perform computer-guided implant surgery. The definitive digital data were then used to design the definitive CAD/CAM-fabricated fixed dental prosthesis.

Treatment of a maxillary central incisor with class III invasive cervical resorption and compromised ferrule: a clinical report.

This clinical report presents the treatment of a maxillary central incisor with class III invasive cervical resorption and a compromised ferrule. Nonsurgical endodontic therapy combined with periodontal surgery was provided for debridement. Direct light-polymerizing resin-modified glass ionomer cement and a zirconia crown were used to repair the defect. Symptomatic endodontic complication was diagnosed with localized cone beam computed tomography at 6-month follow-up, and periapical microsurgery was rendered. The patient was followed-up for 30 months after treatment and had no further complications.

A retrospective study of complications associated with 100 consecutive maxillary sinus augmentations via the lateral window approach.

PURPOSE: To report the complications encountered during 100 consecutive maxillary sinus augmentations via the lateral window approach and to propose solutions to manage these complications. MATERIALS AND METHODS: Pretreatment residual bone heights and the presence of septa were recorded. The incidences of any intraoperative or postoperative sinus complications such as excessive bleeding, membrane perforation, infection, wound dehiscence, sinusitis, loss of bone graft, and implant success were reported. results: This study evaluated 42 men and 44 women requiring 100 consecutive sinus elevation procedures between March 2008 and February 2011. Five intraoperative membrane perforations were noted, and one subsequently developed an active infection (2 weeks after surgery). Eight instances of suppuration were noted, while 10 sites presented with wound dehiscence 1 to 2 weeks after surgery. One example of partial loss of the bone graft 6 months after surgery was identified. Of a total of 151 implants placed in 97 sinuses (one patient with bilateral sinuses and one with unilateral sinus did not complete implant placement), 2 implants presented excessive bone loss prior to uncovering. One implant was removed and one was left submerged. conclusions: Sinus floor elevation utilizing the lateral window approach is a predictable approach to manage bone volume deficiency in the posterior maxilla for patients seeking dental implant-based treatment. However, complications may include membrane tear, infection, wound dehiscence, loss of graft, and implant failure. It is vital for the clinician to understand how to recognize and solve these complications.