Anterior atlantoaxial motion preservation fixation technique for axis complex fractures (odontoid process with Hangman's fractures) and technique notes.

This study aims to investigate the feasibility and efficacy of anterior atlantoaxial motion preservation fixation (AMPF) in treating axis complex fractures involving the odontoid process fracture and Hangman's fractures with C2/3 instability. A retrospective study was conducted on eight patients who underwent AMPF for axis complex fractures at the General Hospital of Central Theater Command from February 2004 to October 2021. The types of axis injuries, reasons for injuries, surgery time, intraoperative blood loss, spinal cord injury classification (American Spinal Injury Association, ASIA), as well as complications and technical notes, were documented. This study included eight cases of type II Hangman's fracture, five cases of type II and three cases of type III odontoid process fracture. Five patients experienced traffic accidents, while three patients experienced falling injuries. All patients underwent AMPF surgery with an average intraoperative blood loss of 288.75 mL and a duration of 174.5 min. Two patients experienced dysphagia 1 month after surgery. The patients were followed up for an average of 15.63 months. One case improved from C to E in terms of neurological condition, three cases improved from D to E, and four cases remained at E. Bony fusion and Atlantoaxial Motion Preservation were successfully achieved for all eight patients. AMPF is a feasible and effective way for simultaneous odontoid process fracture and Hangman's fractures with C2/3 instability, while preserving atlantoaxial movement.

[O-arm navigation versus C-arm navigation for guiding percutaneous long sacroiliac screws placement in treatment of Denis type â ¡ sacral fractures].

Objective: To compare the effectiveness of O-arm navigation and C-arm navigation for guiding percutaneous long sacroiliac screws in treatment of Denis type Ⅱ sacral fractures. Methods: A retrospective study was conducted on clinical data of the 46 patients with Denis type Ⅱ sacral fractures between April 2021 and October 2022. Among them, 19 patients underwent O-arm navigation assisted percutaneous long sacroiliac screw fixation (O-arm navigation group), and 27 patients underwent C-arm navigation assisted percutaneous long sacroiliac screw fixation (C-arm navigation group). There was no significant difference in gender, age, causes of injuries, Tile classification of pelvic fractures, combined injury, the interval from injury to operation between the two groups ( P>0.05). The intraoperative preparation time, the placement time of each screw, the fluoroscopy time of each screw during placement, screw position accuracy, the quality of fracture reduction, and fracture healing time were recorded and compared, postoperative complications were observed. Pelvic function was evaluated by Majeed score at last follow-up. Results: All operations were completed successfully, and all incisions healed by first intention. Compared to the C-arm navigation group, the O-arm navigation group had shorter intraoperative preparation time, placement time of each screw, and fluoroscopy time, with significant differences ( P<0.05). There was no significant difference in screw position accuracy and the quality of fracture reduction ( P>0.05). There was no nerve or vascular injury during screw placed in the two groups. All patients in both groups were followed up, with the follow-up time of 6-21 months (mean, 12.0 months). Imaging re-examination showed that both groups achieved bony healing, and there was no significant difference in fracture healing time between the two groups ( P>0.05). During follow-up, there was no postoperative complications, such as screw loosening and breaking or loss of fracture reduction. At last follow-up, there was no significant difference in pelvic function between the two groups ( P>0.05). Conclusion: Compared with the C-arm navigation, the O-arm navigation assisted percutaneous long sacroiliac screws for the treatment of Denis typeⅡsacral fractures can significantly shorten the intraoperative preparation time, screw placement time, and fluoroscopy time, improve the accuracy of screw placement, and obtain clearer navigation images.

[Finite element analysis of five internal fixation modes in treatment of Day type â ¡crescent fracture dislocation of pelvis].

Objective: To compare the biomechanical differences among the five internal fixation modes in treatment of Day type Ⅱ crescent fracture dislocation of pelvis (CFDP), and find an internal fixation mode which was the most consistent with mechanical principles. Methods: Based on the pelvic CT data of a healthy adult male volunteer, a Day type Ⅱ CFDP finite element model was established by using Mimics 17.0, ANSYS 12.0-ICEM, Abaqus 2020, and SolidWorks 2012 softwares. After verifying the validity of the finite element model by comparing the anatomical parameters with the three-dimensional reconstruction model and the mechanical validity verification, the fracture and dislocated joint of models were fixed with S 1 sacroiliac screw combined with 1 LC-Ⅱ screw (S 1+LC-Ⅱ group), S 1 sacroiliac screw combined with 2 LC-Ⅱ screws (S 1+2LC-Ⅱ group), S 1 sacroiliac screw combined with 2 posterior iliac screws (S 1+2PIS group), S 1 and S 2 sacroiliac screws combined with 1 LC-Ⅱ screw (S 1+S 2+LC-Ⅱ group), S 2-alar-iliac (S 2AI) screw combined with 1 LC-Ⅱ screw (S 2AI+LC-Ⅱ group), respectively. After each internal fixation model was loaded with a force of 600 N in the standing position, the maximum displacement of the crescent fracture fragments, the maximum stress of the internal fixation (the maximum stress of the screw at the ilium fracture and the maximum stress of the screw at the sacroiliac joint), sacroiliac joint displacement, and bone stress distribution around internal fixation were observed in 5 groups. Results: The finite element model in this study has been verified to be effective. After loading 600 N stress, there was a certain displacement of the crescent fracture of pelvis in each internal fixation model, among which the S 1+LC-Ⅱ group was the largest, the S 1+2LC-Ⅱ group and the S 1+2PIS group were the smallest. The maximum stress of the internal fixation mainly concentrated at the sacroiliac joint and the fracture line of crescent fracture. The maximum stress of the screw at the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 2AI+LC-Ⅱ group. The maximum stress of the screw at the ilium fracture was the largest in the S 1+2PIS group and the smallest in the S 1+2LC-Ⅱ group. The displacement of the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 1+S 2+LC-Ⅱ group. In each internal fixation model, the maximum stress around the sacroiliac screws concentrated on the contact surface between the screw and the cortical bone, the maximum stress around the screws at the iliac bone concentrated on the cancellous bone of the fracture line, and the maximum stress around the S 2AI screw concentrated on the cancellous bone on the iliac side. The maximum bone stress around the screws at the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 2AI+LC-Ⅱ group. The maximum bone stress around the screws at the ilium was the largest in the S 1+2PIS group and the smallest in the S 1+LC-Ⅱ group. Conclusion: For the treatment of Day type Ⅱ CFDP, it is recommended to choose S 1 sacroiliac screw combined with 1 LC-Ⅱ screw for internal fixation, which can achieve a firm fixation effect without increasing the number of screws.

Inclined angles of acetabular quadrilateral plate: digital measurement and clinical application of the new anatomical concept.

PURPOSE: Matta scoring standard is one of the most frequently used postoperative imaging evaluations for acetabular fracture reduction, but has obvious shortcomings. This study, for the first time, proposed the concept of inclined angles of acetabular quadrilateral plate. The purpose of this study was to investigate the normal range of the inclined angles in adults by digital measurement and explore the feasibility of using them to evaluate the reduction quality of acetabular quadrilateral fractures after surgery. METHODS: Firstly, the pelvic CT three-dimensional reconstruction data of 40 healthy adults including 20 males and 20 females were collected. The normal range of the anterior, middle, and posterior inclined angles were measured via Mimics software. Secondly, a modified Matta criteria that combined the classic Matta criteria and evaluation criteria of the inclined angles was proposed. And we classified modified Matta criteria into three grades including excellent, good and poor. Finally, a total of 125 cases with quadrilateral plate fractures was included and the postoperative CT data were analyzed by using both the classic Matta criteria and our modified Matta criteria. Then, the accuracy and consistency of both criteria to evaluate postoperative hip function was investigated. RESULTS: The average anterior inclined angle: male (97.11° ± 2.59°), female (90.63° ± 2.09°); middle inclined angle: male (105.57° ± 1.93°), female (100.64° ± 2.46°); and posterior inclined angle: male (112.62° ± 2.54), female (106.37° ± 2.53°). Whether in males or in females, the anterior, middle, and posterior inclined angles showed a progressively increasing trend. All the three inclined angles in males were all significantly larger than those in females (p < 0.05). Among 125 cases with quadrilateral plate fractures, 101 cases (80.8%) were graded as excellent, 18 cases (14.4%) as good, and 6 cases (4.8%) as poor according to the classic Matta criteria. While based on modified Matta criteria, there were excellent in 37 cases (29.6%), good in 76 cases (60.8%), and poor in 12 cases (9.6%). According to the Harris hip score system, the functional outcomes were excellent in 59 cases (47.2%), good in 26 cases (20.8%), fair in 24 cases (19.2%), and poor in 16 cases (12.8%). Our results showed that among the cases evaluated as excellent according to the classic Matta criteria and modified Matta criteria, the excellent-to-good rates of hip function were 70.3% and 78.4%, respectively. And among the cases evaluated as poor according to the modified Matta criteria, the fair-to-poor rate of hip function was 75%, while this value was 50% for classic Matta criteria. Both differences were statistically significant (p < 0.05). CONCLUSION: Inclined angles of the quadrilateral plate could be used to assess the quality of fracture reduction and provide a basis for evaluating the rotational displacement of fracture blocks in the quadrilateral plate, which compensates the shortage of classic Matta criteria.

Comparison of the intraarticular osteotomy and the "window" osteotomy in the treatment of tibial plateau fracture involving depressed posterolateral fragments.

OBJECTIVES: The methods of reduction of depressed posterolateral fragments in tibial plateau fracture through anterolateral approaches remain controversial. This paper aimed to compare the intraarticular osteotomy technique and the "window" osteotomy technique for the reduction of depressed posterolateral fragments through anterolateral approach. METHOD: From January 2015 to January 2022, we retrospectively reviewed the data on patients with tibial plateau fracture involving depressed posterolateral fragments treated with the intraarticular osteotomy or the "window" osteotomy. 40 patients underwent the intraarticular osteotomy were divided into group A, while 36 patients underwent the "window" osteotomy were divided into group B. The operative time, bone grafting volume, fracture healing time, complication, reduction quality and postoperative functional results were compared between the two groups. RESULTS: The average follow-up duration was 16.6 ± 3.7 months. The average bone grafting volume for all patients in group B was essential larger than group A (p = 0.001). Compared to group B, patients in groups A had significantly shorter fracture healing time (p = 0.011). The depth of depressed articular surface, PSA and the radiographic evaluation at 2 days and 6 months after surgery in group A were significantly lower than group B (p<0.05). Based on the HSS knee-rating score, no significant difference in function results was found between the two groups (p>0.05). No significant difference was found in operation time and blood loss between the two groups (p>0.05). CONCLUSION: The intraarticular osteotomy could obtain satisfactory clinical results in tibial plateau fracture involving posterolateral fragments.

Three-Dimensional Printed Plate Template Versus Hemipelvis Model in Patient-Specific Plate Preparation for Posterior Wall Acetabular Fractures.

OBJECTIVE: The application of three-dimensional (3D) printing technology in the management of posterior wall acetabular fractures can greatly reduce surgical invasiveness and operative time and simplify the procedure of reconstruction plate contouring, but the cost and time of patient-specific plate preparation on the basis of traditional 3D-printed pelvis model should not be neglected. We described a new method for patient-specific plate preparation by using 3D-printed plate template. The study aimed to assess the effectiveness and feasibility of the 3D-printed plate template in patient-specific plate preparation for posterior wall acetabular fractures. METHODS: A total of 65 cases of posterior wall acetabular fractures with surgical treatment from December 2012 to December 2020 were chosen. According to the different plate contouring methods, the 65 cases were divided into three groups, which were group A (21 cases), group B (20 cases), and group C (24 cases). In group A, the 3D-printed plate template was used to contour the patient-specific reconstruction plate before surgery, whereas the 3D-printed hemipelvis model was adopted for group B. In group C, the reconstruction plate was contoured intraoperatively. Among the three groups, the instrumentation time, surgical time, blood loss, patient-specific plate preparation time, complications, reduction quality, and hip function were compared. The Kruskal-Wallis test was used to analyze the reduction quality and hip function among three groups. RESULTS: In comparison with group C, patients in groups A and B were featured by obviously shorter instrumentation time (-22, -23 min), shorter surgical time (-46, -44 min), and less intraoperative blood loss (-110, -122 mL). Compared to the hemipelvis model in group B (2.29 ± 0.56 vs. 12.70 ± 3.79 days), the 3D printing time for plate templates in group A was significantly shorter. The reduction quality and hip function had no obvious statistical difference among the three groups. The complication rate within group A (3/21) and group B (3/20) were both slightly lower than group C (5/24), with no obvious difference. CONCLUSIONS: Both the patient-specific pre-contoured plate fixation methods based on the 3D-printed hemipelvis model and plate template can achieve satisfactory clinical efficacy, with the advantage of shorter instrumentation and surgical time, and less intraoperative blood loss. However, 3D printing of plate template is easier and less time-consuming, considering the shorter time and less cost for 3D printing of physical model.

Incidence of and Risk Factors for Screw Loosening after Iliosacral Screw Fixation for Posterior Pelvic Ring Injury.

PURPOSES: Screw loosening is a common complication of iliosacral screw fixation, with subsequent loss of stability and fracture re-displacement. This study aimed to investigate the incidence of and risk factors for screw loosening after iliosacral screw fixation for posterior pelvic ring injury. METHODS: A total of 135 patients with posterior pelvic ring injuries who were treated with iliosacral screw fixation in our department between July 2015 and April 2021 were selected for this retrospective analysis. The possible risk factors for screw loosening were investigated using univariate and multivariate logistic regression analyses of patient demographics and trauma-related and iatrogenic variables, including age, sex, body mass index, Osteoporosis Self-Assessment Tool for Asians (OSTA) index, mechanism of injury, Young-Burgess classification, site of injury, type of injury, type of screw, mode of fixation, numbers of guidewire adjustments, accuracy of screw position, and quality of fracture reduction. RESULTS: The incidence of screw loosening was 15.6% (n = 21). The mean duration for screw loosening was 3.2 ± 1.5 months after operation. Univariate analysis results showed that the Young-Burgess classification, type of injury, site of injury, type of screw, mode of fixation, and OSTA index might be related to screw loosening (p < 0.05). According to the multivariate logistic regression, vertical shear injuries (Odds ratios [OR] 9.80, 95% Confidence intervals [CI] [1.96-73.28], p = 0.008), type of injury (OR 0.25, 95% CI [0.13-0.79], p = 0.027), common screws (OR 6.94, 95% CI [1.53-31.40], p = 0.012), screws insertion only at the level of the first sacral segment (S1) (OR 8.79, 95% CI [1.18-65.46], p = 0.034), injury site located in the medial sacral foramina (OR 6.28, 95% CI [1.16-34.06], p = 0.033), and lower OSTA index [OR 0.41, 95% CI [0.24-0.71], p = 0.001] were significantly related to screw loosening. CONCLUSIONS: Vertical shear injuries, sacral fractures, injury site located in the medial sacral foramina, and lower OSTA index are significantly associated with the postoperative occurrence of screw loosening. Transiliac-transsacral screw fixation and screws insertion both at the level of the S1 and second sacral segment can prevent screw loosening.

Epidemiological updates of post-traumatic related limb osteomyelitis in china: a 10 years multicentre cohort study.

BACKGROUND: Post-traumatic related limb osteomyelitis (PTRLO) is a complex bone infection. Currently, there are no available microbial data on a national scale that can guide appropriate antibiotic selection, and explore the dynamic changes in dominant pathogens over time. This study aimed to conduct a comprehensive epidemiological analysis of PTRLO in China. METHODS: The study was approved by the Institutional Research Board (IRB), and 3526 PTRLO patients were identified from 212 394 traumatic limb fracture patients at 21 hospitals between 1 January 2008 and 31 December 2017. A retrospective analysis was conducted to investigate the epidemiology of PTRLO, including changes in infection rate (IR), pathogens, infection risk factors and antibiotic resistance and sensitivity. RESULTS: The IR of PTRLO increased gradually from 0.93 to 2.16% (Z=14.392, P <0.001). Monomicrobial infection (82.6%) was significantly higher than polymicrobial infection (17.4%) ( P <0.001). The IR of Gram-positive (GP) and Gram-negative (GN) pathogens showed a significant increase from the lowest 0.41% to the highest 1.15% (GP) or 1.62% (GN), respectively. However, the longitudinal trend of GP vs. GN's composition did not show any significance (Z=±1.1918, P >0.05). The most prevalent GP strains were Methicillin-sensitive Staphylococcus aureus (MSSA) (17.03%), Methicillin-resistant Staphylococcus aureus (MRSA) (10.46%), E. faecalis (5.19%) and S. epidermidis (4.87%). In contrast, the dominant strains GN strains were Pseudomonas Aeruginosa (10.92%), E. cloacae (10.34%), E. coli (9.47%), Acinetobacter Baumannii (7.92%) and Klebsiella Pneumoniae (3.33%). In general, the high-risk factors for polymicrobial infection include opened-fracture (odds ratio, 2.223), hypoproteinemia (odds ratio, 2.328), and multiple fractures (odds ratio, 1.465). It is important to note that the antibiotics resistance and sensitivity analysis of the pathogens may be influenced by complications or comorbidities. CONCLUSIONS: This study provides the latest data of PTRLO in China and offers trustworthy guidelines for clinical practice. (China Clinical Trials.gov number, ChiCTR1800017597).

[Osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation in treatment of tibial plateau fractures involving posterolateral column collapse].

Objective: To investigate the effectiveness of osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation in the treatment of tibial plateau fractures involving posterolateral column collapse. Methods: A clinical data of 23 patients with tibial plateau fractures involving posterolateral column collapse, who had undergone osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation between January 2015 and June 2021, was retrospectively analyzed. There were 14 males and 9 females with an average age of 42.6 years ranging from 26 to 62 years. The causes of injury included traffic accident in 16 cases, falling from height in 5 cases, and other injuries in 2 cases. According to Schatzker classification, there were 15 cases of type Ⅴ and 8 cases of type Ⅵ. The time from injury to operation was 4-8 days with an average of 5.9 days. The operation time, intraoperative blood loss, fracture healing time, and complications were recorded. The depth of articular surface collapse of posterolateral column and posterior inclination angle (PSA) of the tibial plateau were compared before operation and at 2 days and 6 months after operation; fracture reduction of tibial plateau fracture was evaluated by Rasmussen anatomic score. The recovery of knee function was evaluated by Hospital for Special Surgery (HSS) score at 2 days and 6 months after operation. Results: All 23 patients were completed the operation successfully. The operation time was 120-195 minutes, with an average of 152.8 minutes; the intraoperative blood loss was 50-175 mL, with an average of 109.5 mL. All patients were followed up 12-24 months, with an average of 16.7 months. One patient had superficial wound infection after operation, and the incision healed after dressing change; primary healing of incision of other patients was obtained. The fracture healing time was 12-18 weeks, with an average of 13.7 weeks. No failure of internal fixation, varus and valgus deformity of the knee joint, and instability of the knee joint was found at last follow-up. One patient developed joint stiffness and the range of motion of the knee joint was 10°-100°; the range of motion of the knee joint of other patients was 0°-125°. At 2 days and 6 months after operation, the depth of articular surface collapse of posterolateral column, PSA, and Rasmussen anatomic scores significantly improved when compared with those before operation ( P<0.05). There was no significant difference between the two postoperative time points ( P>0.05). The HSS score at 6 months after operation was significantly higher than that at 2 days after operation ( P<0.05). Conclusion: For tibial plateau fractures involving posterolateral column collapse, reduction and internal fixation through osteotomy of non-core weight-bearing area of the lateral tibial plateau has the advantages of fully expose the posterolateral column fragment, good articular surface reduction, sufficient bone grafting, and fewer postoperative complications. It is beneficial to restore knee joint function and can be widely used in clinic.

[Clinical study of percutaneous double-segment lengthened sacroiliac screws internal fixation via three-dimensional navigation technology in treatment of Denis type â ¡ and â ¢ sacral fractures].

Objective: To investigate the effectiveness of percutaneous double-segment lengthened sacroiliac screws internal fixation assisted by three-dimensional (3D) navigation technology in treatment of Denis type Ⅱ and Ⅲ sacral fractures. Methods: A clinical data of 45 patients with the Denis type Ⅱ and Ⅲ sacral fractures admitted between January 2017 and May 2020 was retrospectively analyzed. There were 31 males and 14 females, with an average age of 48.3 years (range, 30-65 years). The pelvic fractures were all high energy injuries. According to the Tile classification standard, there were 24 cases of type C1, 16 cases of type C2, and 5 cases of type C3. The sacral fractures were classified as Denis type Ⅱ in 31 cases and type Ⅲ in 14 cases. The interval between injury and operation was 5-12 days (mean, 7.5 days). The lengthened sacroiliac screws were implanted in S 1 and S 2 segments respectively under the assistance of 3D navigation technology. The implantation time of each screw, the intraoperative X-ray exposure time, and the occurrence of surgical complications were recorded. After operation, the imaging reexamination was used to evaluate the screw position according to Gras standard and the reduction quality of sacral fractures according to Matta standard. At last follow-up, the pelvic function was scored with Majeed scoring standard. Results: The 101 lengthened sacroiliac screws were implanted with the assisting of 3D navigation technology. The implantation time of each screw was 37.3 minutes on average (range, 30-45 minutes), and the X-ray exposure time was 46.2 seconds on average (range, 40-55 seconds). All patients had no neurovascular or organ injury. All incisions healed by first intention. The quality of fracture reduction was evaluated according to Matta standard as excellent in 22 cases, good in 18 cases, and fair in 5 cases, and the excellent and good rate was 88.89%. The screw position was evaluated according to Gras standard as excellent in 77 screws, good in 22 screws, and poor in 2 screws, and the excellent and good rate was 98.02%. All patients were followed up 12-24 months (mean, 14.6 months). All fractures healed and the healing time was 12-16 weeks (mean, 13.5 weeks). Pelvic function was evaluated according to Majeed scoring standard as excellent in 27 cases, good in 16 cases, fair in 2 cases, and the excellent and good rate was 95.56%. Conclusion: Percutaneous double-segment lengthened sacroiliac screws internal fixation for the treatment of Denis type Ⅱ and Ⅲ sacral fractures is minimally invasive and effective. With the assistance of 3D navigation technology, the screw implantation is accurate and safe.

A pH-dependent anti-CD47 antibody that selectively targets solid tumors and improves therapeutic efficacy and safety.

BACKGROUND: The antiphagocytic molecule CD47 is overexpressed in a wide variety of cancer cells, and antibodies targeting CD47 for cancer therapies are currently under intensive investigation. However, owing to the ubiquitous expression of CD47 on healthy cells, anti-CD47 therapies often achieve only weak therapeutic benefits and can induce severe side effects. Here, we report the generation of a pH-dependent anti-CD47 antibody (BC31M4) which selectively binds to tumors under the acidic solid tumor microenvironment. METHODS: BC31M4 was generated using antibody phage display and a pH-dependent selection strategy. The pH-dependent binding and blocking activities of BC31M4 were verified using in vitro assays, and the structural basis of the pH-dependent binding property was characterized. BC31M4's antitumor effect was confirmed by both phagocytosis assays and studies in xenograft models. The tumor selectivity, mechanism of action, PK properties, side effects, and therapeutic efficacy were further evaluated in humanized (hCD47 and its receptor hSIRPα) immunocompetent syngeneic mouse models. RESULTS: The crystal structure reveals that two histidines locate within the CDRs of the light chain directly contribute to the pH-dependent binding of BC31M4. BC31M4 promotes macrophage phagocytosis of tumor cells more potently at acidic-pH than at physiological-pH. Our hCD47/hSIRPα humanized syngeneic mouse model results demonstrated that BC31M4 selectively accumulates in tumors but not in normal tissues. BC31M4 causes minimal side effects and exhibits superior PK properties as compared to the other examined anti-CD47 antibodies. When combined with adoptive T cell transfer, BC31M4 efficiently promotes adaptive immune responses against tumors and also induces immune memory. Moreover, we show that BC31M4's antitumor effects rely on an Fc that mediates strong effector functions. CONCLUSIONS: Our study illustrates that the development of a tumor-selective, pH-dependent anti-CD47 antibody safely confers strong therapeutic effects against solid tumors, thus providing a promising therapeutic strategy to overcome the challenges of anti-CD47 therapy.

Chiral Se@CeO2 superparticles for ameliorating Parkinson's disease.

In this study, we prepare chiral D-/L-type Se@CeO2 superparticles (D-/L-SPs) with a g-factor of 0.018 using D-/L-cysteine as chiral ligands. The chiral SPs demonstrate ultra-high enzyme activity of peroxidase (POD), superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GPx). Due to the synergistic effect between Se and CeO2, the maximum initial velocity of GPx, CAT, and POD for L-SP is 10, 7, and 5.6 times higher than that of a mixture of Se nanoparticles (NPs) and CeO2 NPs. Significantly, the chiral L-SPs show much stronger ROS scavenging ability than D-SP in the PD-like cell model. Moreover, the amount of α-synuclein (α-syn) in the cerebrospinal fluid of PD mice is reduced by 70.7% within two weeks. The L-SPs effectively alleviate neurodegeneration in a mouse model of PD, showing potential applications in the clinical treatment of neurodegenerative diseases.

Microwave in situ inactivation in the treatment of bone giant cell tumor: a mid-term descriptive study.

AIM: To evaluate the mid-term clinical efficacy of microwave in situ inactivation combined with bone grafting or polymethyl methacrylate (PMMA) filling in the treatment of giant cell tumor of bone (GCTB). METHODS: This is a retrospective, descriptive, and analytical study. A total of 30 GCTB patients received microwave in situ inactivation from January 2012 to January 2020, whose clinical recurrence rate was evaluated at the last follow-up after microwave in situ inactivation surgery. The Musculoskeletal Tumor Society (MSTS) function score was used to evaluate the postoperative clinical panoramic results. RESULTS: All patients were followed up for 21 to 110 months, with an average of 63.79 months. Distal femur (40%) and proximal tibia (28%) had a higher rate of GCTB incidence. Seventeen percent of tumor patients suffered from associated pathologic fracture. The rate of Campanacci classification stage III was 60%. The average MSTS score was evaluated as 27.53 points overall at the last follow-up. In terms of complications, three, two, two and one cases developed fat liquefaction, controllable tissue rejection reaction, incision infection and degenerative changes around lesion joint, respectively, without in situ recurrences and reoperation as well as distant lung metastasis. CONCLUSIONS: The method of microwave in situ inactivation combined with bone grafting or PMMA filling is prudently recommended as one of the options for the limb salvage treatment of giant cell tumor of long and periarticular bone. LEVEL OF EVIDENCE: IV: case series.

An anti-CD98 antibody displaying pH-dependent Fc-mediated tumour-specific activity against multiple cancers in CD98-humanized mice.

The cell-surface glycoprotein CD98-a subunit of the LAT1/CD98 amino acid transporter-is an attractive target for cancer immunotherapies, but its widespread expression has hampered the development of CD98-targeting antibody therapeutics. Here we report that an anti-CD98 antibody, identified via the screening of phage-display libraries of CD98 single-chain variable fragments with mutated complementarity-determining regions, preserves the physiological function of CD98 and elicits broad-spectrum crystallizable-fragment (Fc)-mediated anti-tumour activity (requiring Fcγ receptors for immunoglobulins, macrophages, dendritic cells and CD8+ T cells, as well as other components of the innate and adaptive immune systems) in multiple xenograft and syngeneic tumour models established in CD98-humanized mice. We also show that a variant of the anti-CD98 antibody with pH-dependent binding, generated by solving the structure of the antibody-CD98 complex, displayed enhanced tumour-specific activity and pharmacokinetics. pH-dependent antibody variants targeting widely expressed antigens may lead to superior therapeutic outcomes.

Comparison of Three-Dimensional Navigation-Guided Percutaneous Iliosacral Screw and Minimally Invasive Percutaneous Plate for the Treatment of Zone II Unstable Sacral Fractures.

OBJECTIVE: The percutaneous IS screws and the minimally invasive percutaneous plate are the most popular internal methods for Zone II unstable sacral fractures. However, the choice of fixation remains controversial for orthopaedic surgeons. The purpose of study was to evaluate and compare the clinical results of percutaneous iliosacral (IS) screw fixation under three-dimensional (3D) navigation and minimally invasive percutaneous plate fixation in the treatment of Zone II unstable sacral fractures. METHODS: A retrospective study was performed, including 64 patients with Zone II unstable sacral fractures who underwent percutaneous IS screw fixation under 3D navigation (navigation group) and minimally invasive percutaneous plate fixation (plate group) from January 2011 and March 2021 in our department. The age, gender, fracture type, mechanism of injury, injury severity score (ISS), time from admission to operation, operative time, intraoperative blood loss, hospital stay, incision length, follow-up time, time to clinical healing, and complications were recorded and analyzed. Matta standard was used to assess fracture reduction outcomes. The Majeed function system assessed functional outcomes at the last follow-up. RESULTS: The average follow-up time was (14.42 ± 1.57) months in the navigation group and (14.79 ± 1.37) months in the plate group. No statistical difference between the two groups in age, gender, fracture type, mechanism of injury, ISS, time from admission to operation, and time to clinical healing. However, significant differences were detected in operative time, intraoperative blood loss, hospital stay, and incision length (p < 0.001). According to Matta standard at 2 days postoperatively, the excellent and good rate was 91.42% in the navigation group, and it was 93.10% in the plate group. There was no significant difference between the two groups (p = 0.961). According to Majeed function system at the follow-up, the excellent and good rate was 97.14% in the navigation group, and 93.10% in the plate group. The difference between the two groups was not statistically significant (p = 0.748). There were no neurovascular injuries associated with this procedure. The incidence of complications was 44.82% (13/29) in the plate group, while 14.28% (5/35) in the navigation group (p = 0.007). CONCLUSION: This study found that compared with minimally invasive percutaneous plate fixation, percutaneous IS screw fixation under 3D navigation is a suitable option for the treatment of Zone II unstable sacral fractures. This approach is characterized by its shorter operation time, less surgical trauma, less bleeding, less hospital time, and fewer complications.

A cross-reactive pH-dependent EGFR antibody with improved tumor selectivity and penetration obtained by structure-guided engineering.

The clinical use of anti-EGFR antibody-based cancer therapy has been limited by antibody-EGFR binding in normal tissues, so developing pH-dependent anti-EGFR antibodies that selectively bind with EGFR in tumors-by taking advantage of the acidity of tumor microenvironment relative to normal tissues-may overcome these limitations. Here, we generated pH-dependent anti-EGFR antibodies with cross-species reactivity for human and mouse EGFR, and we demonstrate that pH-dependent antibodies exhibit tumor-selective binding by binding strongly to EGFR under acidic conditions (pH 6.5) but binding weakly under neutral (pH 7.4) conditions. Based on screening a non-immune human antibody library and antibody affinity maturation, we initially generated antibodies with cross-species reactivity for human and mouse EGFR. A structure model was subsequently constructed and interrogated for hotspots affecting pH-dependent binding, which supported development of a cross-reactive pH-dependent anti-EGFR antibody, G532. Compared with its non-pH-dependent antibody variant, G532 exhibits improved tumor selectivity, tumor penetration, and antitumor activity. Thus, beyond showing that pH-dependent anti-EGFR antibodies can overcome multiple limitations with antibody-based cancer therapies targeting EGFR, our study illustrates a structure-guided antibody-antigen binding pH-dependency engineering strategy to enhance antibody tumor selectivity and tumor penetration, which can inform the future development of antibody-based cancer therapies targeting other ubiquitously expressed molecules.

One-stop computerized virtual planning system for the surgical management of posterior wall acetabular fractures.

BACKGROUND: Posterior wall acetabular fractures remain one of the most difficult fracture injuries to treat. Accurate assessment of fracture characteristics and appropriate preoperative surgical strategies are essential for excellent reduction. This paper evaluates the feasibility and effectiveness of a one-stop computerized virtual planning system for the surgical management of posterior wall acetabular fractures. METHODS: 52 cases of posterior wall acetabular fractures treated surgically were selected in our department between January 2015 and December 2020 for retrospective analysis. 52 cases were classified into group A (25 patients) and group B (27 patients) according to whether computerized virtual planning procedures were performed preoperatively. In group A, virtual surgical simulation was conducted using a one-stop computerized planning system preoperatively. In group B, traditional surgery was employed. Reduction quality, surgical time, blood loss, hip function, complications, and instrumentation time were compared between the two groups. RESULTS: The actual surgery for all patients in group A was essentially the same as the virtual surgery before the operation. Compared to group B, patients in group A had markedly shorter surgical time (-43 min), shorter instrumentation time (-20 min), and less intraoperative blood loss (-130 ml). However, no significant statistical difference was observed in reduction quality and hip function. The complication rate was slightly lower in group A (4/25) than in group B (7/27), without a significant difference. CONCLUSION: The one-stop computerized virtual planning system is a highly effective, user-friendly and educational tool for allowing the cost-efficient surgical simulation of posterior wall acetabular fractures and providing a more individualized therapeutic schedule. The one-stop computerized planning system is feasible to treat posterior wall acetabular fractures, which is an effective method than the conventional treatment of posterior wall acetabular fractures. TRIAL REGISTRATION: retrospective registration.

Application of computerized virtual preoperative planning procedures in comminuted posterior wall acetabular fractures surgery.

BACKGROUND: The treatment of comminuted posterior wall acetabular fractures remains challenging due to the difficulty in understanding of fracture patterns and lack of appropriate preoperative planning process. Virtual preoperative planning procedures are now being commonly used in orthopedic surgery to aid in management of such complex problems. Our aim was to evaluate the feasibility and clinical value of a new method by applying computerized virtual preoperative planning procedures in the treatment of comminuted posterior wall acetabular fractures. METHODS: A total of 45 patients with comminuted posterior wall acetabular fractures from June 2014 to December 2018 were retrospectively analyzed. Based on the usage of computerized virtual preoperative planning procedures, they were assigned to group A and group B. In group A (24 patients), the new method was applied before surgery. In group B (21 patients), the conventional surgery was performed without assistance of computerized virtual preoperative planning procedures. The two groups were assessed in terms of blood loss, surgical time, reduction quality, fracture healing time, postoperative complications, and hip function. RESULTS: There were no significant differences in demographic data between the two groups. Patients in group A had significantly less intraoperative blood loss (429.58 vs 570.24 ml, P < 0.001) and shorter operation time (154.79 vs 181.90 min, P < 0.01) compared to group B. Using the Matta scoring system, the reduction was graded as anatomic in 20 cases, imperfect in three cases and poor in one case in group A, versus 16 cases was graded as anatomic, three as imperfect and two as poor for group B. According to the modified Merle d'Aubigné score, hip function was graded as excellent in 15 cases, good in seven cases, fair in one and poor in one for group A in comparison to 11 cases, seven cases, two cases, and one case for group B, respectively. The reduction quality and hip function did not differ within the two groups (P > 0.05). The general postoperative complication rate in group A and group B was 12.5% and 28.6%, respectively, but the difference between the two groups was not statistically significant. CONCLUSION: The application of computerized virtual preoperative planning procedures is feasible in comminuted posterior wall acetabular fractures. It helps orthopedic surgeons better understand the fracture characteristics, enables simulation of the reduction process and preoperative planning of internal fixation methods. This new preoperative planning method using a 3D virtual model is a more effective method than conventional method in surgical treatment of comminuted posterior wall acetabular fractures. Trial registration retrospectively registered.