Health risks and sources of trace elements and black carbon in PM2.5 from 2019 to 2021 in Beijing.

A comprehensive health risk assessment of PM2.5 is meaningful to understand the current status and directions regarding further improving air quality from the perspective of human health. In this study, we evaluated the health risks of PM2.5 as well as highly toxic inorganic components, including heavy metals (HMs) and black carbon (BC) based on long-term observations in Beijing from 2019 to 2021. Our results showed that the relative risks of chronic obstructive pulmonary disease, lung cancer, acute lower respiratory tract infection, ischemic heart disease, and stroke decreased by 4.07%-9.30% in 2020 and 2.12%-6.70% in 2021 compared with 2019. However, they were still at high levels ranging from 1.26 to 1.77, in particular, stroke showed the highest value in 2021. Mn had the highest hazard quotient (HQ, from 2.18 to 2.56) for adults from 2019 to 2021, while Ni, Cr, Pb, As, and BC showed high carcinogenic risks (CR > 1.0×10-6) for adults. The HQ values of Mn and As and the CR values of Pb and As showed constant or slight upwards trends during our observations, which is in contrast to the downward trends of other HMs and PM2.5. Mn, Cr, and BC are crucial toxicants in PM2.5. A significant shrink of southern region sourcesof HMs and BCshrank suggests the increased importance of local sources. Industry, dust, and biomass burning are the major contributors to the non-carcinogenic risks, while traffic emissions and industry are the dominant contributors to the carcinogenic risks in Beijing.

Electrocatalytic oxidation of gaseous toluene in an all-solid cell using a foam Ti/Sb-SnO2/ß-PbO2 anode.

Mineralization of benzene, toluene, and xylene (BTX) with high efficiency at room temperature is still a challenge for the purification of indoor air. In this work, a foam Ti/Sb-SnO2/ß-PbO2 anode catalyst was prepared for electrocatalytically oxidizing gaseous toluene in an all-solid cell at ambient temperature. The complex Ti/Sb-SnO2/ß-PbO2 anode, which was prepared by sequentially deposing Sb-SnO2 and ß-PbO2 on a foam Ti substrate, shows high electrocatalytic oxidation efficiency of toluene (80%) at 7 hr of reaction and high CO2 selectivity (94.9%) under an optimized condition, i.e., a cell voltage of 2.0 V, relative humidity of 60% and a flow rate of 100 mL/min. The better catalytic performance can be ascribed to the high production rate of ⋅OH radicals from discharging adsorbed water and the inhibition of oxygen evolution on the surface of foam Ti/Sb-SnO2/ß-PbO2 anode when compared with the foam Ti/Sb-SnO2 anode. Our results demonstrate that prepared complex electrodes can be potentially used for electrocatalytic removal of gaseous toluene at room temperature with a good performance.

Sources, bioaccumulation, and toxicity mechanisms of cadmium in Chlamys farreri.

The Potentially toxic elements (PTEs) cadmium (Cd) is one of the most serious stressors polluting the marine environment. Marine bivalves have specific high enrichment capacity for Cd. Previous studies have investigated the tissue distribution changes and toxic effects of Cd in bivalves, but the sources of Cd enrichment, migration regulation during growth, and toxicity mechanisms in bivalves have not been fully explained. Here, we used stable-isotope labeling to investigate the contributions of Cd from different sources to scallop tissues. We sampled the entire growth cycle of Chlamys farreri, which is widely cultured in northern China, from juveniles to adult scallops. We found tissue variability in the bioconcentration-metabolism pattern of Cd in different bound states, with Cd in the aqueous accounting for a significant contribution. The accumulation pattern of Cd in all tissues during growth was more significant in the viscera and gills. Additionally, we combined a multi-omics approach to reveal a network of oxidative stress-induced toxicity mechanisms of Cd in scallops, identifying differentially expressed genes and proteins involved in metal ion binding, oxidative stress, energy metabolism, and apoptosis. Our findings have important implications for both ecotoxicology and aquaculture. They also provide new insights into marine environmental assessment and mariculture development.

PtSnBi Nanoplates Enable Photoacoustic Imaging-Guided Highly Efficient Photothermal Tumor Ablation.

The development of photothermal agents (PTAs) with robust photostability and high photothermal conversion efficiency is of great importance for cancer photothermal therapy. Herein, a novel PTA was created using two-dimensional intermetallic PtSnBi nanoplates (NPs), which demonstrated excellent photostability and biocompatibility with a high photothermal conversion efficiency of ∼61 % after PEGylation. More importantly, PtSnBi NPs could be employed as photoacoustic imaging contrast agents for tumor visualization due to their strong absorbance in the NIR range. In addition, both in vitro and in vivo experiments confirmed that PtSnBi NPs had a good photothermal efficacy under NIR laser irradiation. Therefore, the remarkable therapeutic characteristics of PtSnBi NPs make them a most promising candidate for cancer theranostics.

Dust emission reduction enhanced gas-to-particle conversion of ammonia in the North China Plain.

Ammonium salt is an important component of particulate matter with aerodynamic diameter less than 2.5 µm (PM2.5) and has significant impacts on air quality, climate, and natural ecosystems. However, a fundamental understanding of the conversion kinetics from ammonia to ammonium in unique environments of high aerosol loading is lacking. Here, we report the uptake coefficient of ammonia (γNH3) on ambient PM2.5 varying from 2.2 × 10-4 to 6.0 × 10-4 in the North China Plain. It is significantly lower than those on the model particles under simple conditions reported in the literature. The probability-weighted γNH3 increases obviously, which is well explained by the annual decrease in aerosol pH due to the significant decline in alkali and alkali earth metal contents from the emission source of dust. Our results elaborate on the complex interactions between primary emissions and the secondary formation of aerosols and the important role of dust in atmospheric chemistry.

Co-Exposure of Ambient Particulate Matter and Airborne Transmission Pathogens: The Impairment of the Upper Respiratory Systems.

Recent evidence has pinpointed the positive relevance between air particulate matter (PM) pollution and epidemic spread. However, there are still significant knowledge gaps in understanding the transmission and infection of pathogens loaded on PMs, for example, the interactions between pathogens and pre-existing atmospheric PM and the health effects of co-exposure on the inhalation systems. Here, we unraveled the interactions between fine particulate matter (FPM) and Pseudomonas aeruginosa (P. aeruginosa) and evaluated the infection and detrimental effects of co-exposure on the upper respiratory systems in both in vitro and in vivo models. We uncovered the higher accessibility and invasive ability of pathogens to epithelial cells after loading on FPMs, compared with the single exposure. Furthermore, we designed a novel laboratory exposure model to simulate a real co-exposure scenario. Intriguingly, the co-exposure induced more serious functional damage and longer inflammatory reactions to the upper respiratory tract, including the nasal cavity and trachea. Collectively, our results provide a new point of view on the transmission and infection of pathogens loaded on FPMs and uncover the in vivo systematic impairments of the inhalation tract under co-exposure through a novel laboratory exposure model. Hence, this study sheds light on further investigations of the detrimental effects of air pollution and epidemic spread.

Biopolymer coating for particle surface engineering and their biomedical applications.

Surface engineering of particles based on a polymeric coating is of great interest in materials design and applications. Due to the disadvantages of non-biodegradability and undesirable biocompatibility, the application of petroleum-based synthetic polymers coating in the biomedical field has been greatly limited. In addition, there is lack of a universal surface modification method to functionalize particles of different compositions, sizes, shapes, and structures. Thus, it is imperative to develop a versatile biopolymeric coating with good biocompatibility and tunable biodegradability for the preparation of functional particle materials regardless of their surface chemical and physical structures. Recently, the natural polysaccharide polymers (e.g. chitosan and cellulose), polyphenol-based biopolymers (e.g. polydopamine and tannic acid), and proteins (e.g. amyloid-like aggregates) have been utilized in surface modification of particles, and applications of these modified particles in the field of biomedicine have been also intensively exploited. In this review, the preparation of the above three coatings on particles surface are summarized, and the applications of these materials in drug loading/release, biomineralization, cell immobilization/protection, enzyme immobilization/protection, and antibacterial/antiviral are exemplified. Finally, the challenges and the future research directions on biopolymer coating for particles surface engineering are prospected.

MiR-139-3p Targets CHEK1 Modulating DNA Repair and Cell Viability in Lung Squamous Carcinoma Cells.

Non-small-cell lung carcinoma (NSCLC) can be classified into several subtypes, where lung squamous carcinoma (LUSC) is one common subtype. Though miR-139-3p has been reported to be implicated in the development of various cancers, its mechanisms and functions remain unclear in LUSC. In this study, miR-139-3p was screened as one of the significantly down-regulated miRNAs in LUSC by an "edgeR" differential analysis based on TCGA database, which was verified by qRT-PCR in LUSC cell lines as well. The viability and cell cycle of the LUSC cells were examined by CCK-8 and flow cytometry, respectively, exhibiting that upregulating miR-139-3p restrained cell viability and thus accelerating the cell cycle. To explain this phenomenon, we further explored the downstream target gene through miRTarBase and starBase databases, where CHEK1 was predicted as one candidate. The targeting relationship was verified by a dual luciferase assay, identifying that CHEK1 could be targeted by miR-139-3p. Then, qRT-PCR and western blot analyses were performed to detect the expression of CHEK1 mRNA and proteins under the alteration of miR-139-3p expression. Rescue experiments were conducted to confirm the impacts of miR-139-3p/CHEK1 axis on the cell viability and cell cycle of LUSC. The results indicated that the effects of miR-139-3p on the LUSC cell phenotypes could be blocked by overexpressing CHEK1. In conclusion, our study provides a novel insight into the regulatory role of miR-139-3p in the development of LUSC.

Generation of hydroxyl radical-activatable ratiometric near-infrared bimodal probes for early monitoring of tumor response to therapy.

Tumor response to radiotherapy or ferroptosis is closely related to hydroxyl radical (•OH) production. Noninvasive imaging of •OH fluctuation in tumors can allow early monitoring of response to therapy, but is challenging. Here, we report the optimization of a diene electrochromic material (1-Br-Et) as a •OH-responsive chromophore, and use it to develop a near-infrared ratiometric fluorescent and photoacoustic (FL/PA) bimodal probe for in vivo imaging of •OH. The probe displays a large FL ratio between 780 and 1113 nm (FL780/FL1113), but a small PA ratio between 755 and 905 nm (PA755/PA905). Oxidation of 1-Br-Et by •OH decreases the FL780/FL1113 while concurrently increasing the PA755/PA905, allowing the reliable monitoring of •OH production in tumors undergoing erastin-induced ferroptosis or radiotherapy.

Two-dimensional intermetallic PtBi/Pt core/shell nanoplates overcome tumor hypoxia for enhanced cancer therapy.

The design of multifunctional nanoplatforms is of great importance for improving hypoxia-induced therapeutic outcomes, especially for overcoming radiotherapy (RT) tolerance. Here, two-dimensional intermetallic PtBi/Pt nanoplates (PtBi NPs) were designed as a therapeutic platform to in situ generate oxygen, and thereby overcome tumor hypoxia for boosting photothermal/radiotherapy (PTT/RT). With high X-ray attenuation coefficient, PtBi NPs exhibited outstanding radiotherapy sensitization characteristics. Moreover, the high photothermal effect of PtBi NPs could promote the catalytic activity of PtBi NPs to achieve a synergistic PTT/RT effect. PEGylated PtBi NPs (PtBi-PEG) exhibited excellent biocompatibility, prolonged blood circulation time and enhanced tumor accumulation. Finally, PtBi-PEG showed excellent trimodal contrast enhancement for infrared (IR) imaging, photoacoustic (PA) imaging and X-ray imaging, facilitating imaging-guided cancer therapy. Thus, our work highlights PtBi-PEG as a novel multifunctional theranostic nanoplatform with great potential for future multimodal imaging-guided synergistic cancer therapy.

Identification, Quantification, and Imaging of the Biodistribution of Soot Particles by Mass Spectral Fingerprinting.

Soot is ubiquitous and has large detrimental effects on climate, air quality, and human health. However, identification of soot in carbonaceous media is very challenging due to its nanoscale carbon nature and complex sources. Due to the shortage in the methodology, until now, the fate and health effect of soot particles after inhalation are still poorly understood. Here, we report a new method for label-free identification, quantification, and imaging of soot particles in complex media based on laser desorption/ionization mass spectrometry fingerprinting. We found that soot particles from different origins and with different morphologies showed highly consistent mass spectral fingerprints deriving from peak ratios of small carbon cluster anions (C2--C10-), which enabled both accurate quantification of soot in fine particulate matter (PM2.5) samples and label-free imaging of soot particles in biological media. By using this technique, we tracked and imaged the suborgan distribution of soot particles in mice after exposure to PM2.5. The results showed that the lung is the main target organ for short-term inhalation exposure to soot particles. This study helps to better understand the inhalation toxicology of soot and also provides a practical novel methodological platform for identification, tracing, and toxicological studies of elemental carbon-based nanomaterials.

Flame Retardancy and Thermal Behavior of an Unsaturated Polyester Modified with Kaolinite-Urea Intercalation Complexes.

Organic modified kaolinite-urea intercalation complex (KUIC) was prepared using dimethyl sulfoxide (DMSO) as the precursor of kaolinite intercalation. Its structure was characterized by Fourier transform infrared (FTIR) and X-ray diffraction (XRD). Subsequently, as a synergistic agent, KUIC was combined with flame retardant ammonium polyphosphate (APP) to improve the flame retardant and smoke suppression performance of unsaturated polyester (UP) resin. A cone calorimeter (CONE) was used to study its flame retardancy and smoke suppression, and a scanning electron microscope (SEM) and thermogravimetry (TG) were used to study the micro morphology of the char and flame retardant mechanism. The results show that 12 phr of APP and 3 phr of KUIC were doped into UP to obtain a 28.0% limiting oxygen index (LOI) value. Compared with UP, the heat release rate and smoke production of UP/APP/KUIC composites were greatly decreased. Meanwhile, KUIC indeed enhanced the mechanical properties of UP.

Palladium-based nanomaterials for cancer imaging and therapy.

In recent decade, palladium-based (Pd-based) nanomaterials have shown significant potential for biomedical applications because of their unique optical properties, excellent biocompatibility and high stability in physiological environment. Compared with other intensively studied noble nanomaterials, such as gold (Au) and silver (Ag) nanomaterials, research on Pd-based nanomaterials started late, but the distinctive features, such as high photothermal conversion efficiency and high photothermal stability, have made them getting great attention in the field of nanomedicine. The goal of this review is to provide a comprehensive and critical perspective on the recent progress of Pd-based nanomaterials as imaging contrast agents and therapeutic agents. The imaging section focuses on applications in photoacoustic (PA) imaging, single-photon emission computed tomography (SPECT) imaging, computed tomography (CT) imaging and magnetic resonance (MR) imaging. For treatment of cancer, single photothermal therapy (PTT) and PTT combined with other therapeutic modalities will be discussed. Finally, the safety concerns, forthcoming challenges and perspective of Pd-based nanomaterials on biomedical applications will be presented.

Iron(ii)-chloride-catalyzed regioselective azidation of allenamides with TMSN3.

In this study, we developed a new cost-effective and efficient route for accessing allyl azides: iron(ii)-chloride-catalyzed regioselective azidation of allenamides with TMSN3. This process is highly regio- and stereoselective, affording (E)-allyl azides in good to excellent yields. Due to the versatility of the azide group, these products can be transformed in situ to allyl triazoles and allyl amines, facilitating numerous subsequent chemical modifications.

The Synthesis of a 2D Ultra-Large Protein Supramolecular Nanofilm by Chemoselective Thiol-Disulfide Exchange and its Emergent Functions.

The design and scalable synthesis of robust 2D biological ultrathin films with a tunable structure and function and the ability to be easily transferred to a range of substrates remain key challenges in chemistry and materials science. Herein, we report the use of the thiol-disulfide exchange reaction in the synthesis of a macroscopic 2D ultrathin proteinaceous film with the potential for large-scale fabrication and on-demand encapsulation/release of functional molecules. The reaction between the Cys6-Cys127 disulfide bond of lysozyme and cysteine is chemo- and site-selective. The partially unfolded lysozyme-cysteine monomers aggregate at the air/water or solid/liquid interface to form an ultra-large 2D nanofilm (900 cm2 ) with about 100 % optical transparency. This material adheres to a wide range of substrates and encapsulates and releases a range of molecules without significantly affecting activity.

A dual factor activated metal-organic framework hybrid nanoplatform for photoacoustic imaging and synergetic photo-chemotherapy.

Metal organic frameworks (MOFs) have attracted great interest as a smart drug delivery platform in the battle against cancer for their intriguing properties, such as high drug loading efficiency and microenvironment responsive degradation. Hence, the development of multifunctional MOFs integrating several theranostic elements is of crucial importance. In this work, we constructed a theranostic nanoplatform (DOX/Pd@ZIF-8) based on metal-organic frameworks encapsulating 2D Pd nanosheets and DOX using an all-in-one strategy, taking the advantages of the smart drug delivery function of MOFs and the excellent optical properties of Pd nanosheets. Polydopamine (PDA) was then introduced (DOX/Pd@ZIF-8@PDA) to improve the biocompatibility. DOX/Pd@ZIF-8@PDA exhibited excellent photothermal conversion effects and optoacoustic effects due to the strong NIR light absorption of Pd nanosheets. DOX was released in a pH-dependent manner and the release rates were accelerated in acidic solutions. However burst drug release in a relatively short period could be achieved upon 808 nm laser irradiation. Moreover, the potential of DOX/Pd@ZIF-8@PDA implemented as photoacoustic imaging contrast agents in vitro and in vivo was fully exploited and dual factor activated synergetic photo-chemo cancer therapy was successfully carried out.

NIR-II Driven Plasmon-Enhanced Catalysis for a Timely Supply of Oxygen to Overcome Hypoxia-Induced Radiotherapy Tolerance.

Hypoxia, as a characteristic feature of solid tumor, can significantly adversely affect the outcomes of cancer radiotherapy (RT), photodynamic therapy, or chemotherapy. In this study, a strategy is developed to overcome tumor hypoxia-induced radiotherapy tolerance. Specifically, a novel two-dimensional Pd@Au bimetallic core-shell nanostructure (TPAN) was employed for the sustainable and robust production of O2 in long-term via the catalysis of endogenous H2 O2 . Notably, the catalytic activity of TPAN could be enhanced via surface plasmon resonance (SPR) effect triggered by NIR-II laser irradiation, to enhance the O2 production and thereby relieve tumor hypoxia. Thus, TPAN could enhance radiotherapy outcomes by three aspects: 1) NIR-II laser triggered SPR enhanced the catalysis of TPAN to produce O2 for relieving tumor hypoxia; 2) high-Z element effect arising from Au and Pd to capture X-ray energy within the tumor; and 3) TPAN affording X-ray, photoacoustic, and NIR-II laser derived photothermal imaging, for precisely guiding cancer therapy, so as to reduce the side effects from irradiation.

Oxidation Potential Reduction of Carbon Nanomaterials during Atmospheric-Relevant Aging: Role of Surface Coating.

Carbon nanomaterials from various sources are the important component of PM2.5 and have many adverse effects on human health. They are prone to interact with other pollutants and subsequently age, defined here as changes in chemical properties. In this work, we investigated the aging process of various carbon nanoparticle samples such as Special Black 4A, Printex U, single-walled carbon nanotubes, and hexane flame soot by ambient air and studied the evolution of their oxidation potential. We found that coatings of inorganic and organic species dominated the aging process of carbonaceous particles by ambient air. The amounts of disordered carbon and C-H functional groups of aged carbonaceous particles decreased during the aging process; meanwhile, the contents of sulfate and nitrate showed significant increases. In addition, the oxidation potential measured by the dithiothreitol assay remarkably declined as a function of aging time with ambient air evidently because of heterogeneous reactions between SO2 and NO2, as well as the coating with organic vapors. This work is important for understanding the oxidation potential changes of carbonaceous particles during atmospheric transport.

Effects of ultrasonic treatment on dithiothreitol (DTT) assay measurements for carbon materials.

The dithiothreitol (DTT) assay is the most commonly used method to quantify the oxidative potential of fine particles. However, the reported DTT decay rates of carbon black (CB) materials vary greatly among different researchers. This might have resulted from either the intrinsic toxicity of CB or the unsuitability of the DTT assay protocol for CB particles. In the current study, the protocol of the DTT assay for CB materials has been carefully evaluated. It was found that the dispersion degree of CB particles in water has a great influence on the DTT decay rate of CB materials. For CB particles (special black 4A (SB4A) and Printex U) and single-walled carbon nanotube tube (SWCNT), the DTT decay rate after sonication for 10 min became 4.2, 4.6 and 1.7 times higher than that without sonication. The rate continued to grow as a function of ultrasound time up to 30 min of sonication. Although the concentration of soluble transition metals and surface oxygen-containing species such as carbonyls increased slightly with sonication, they had no significant effects on the measured DTT activity, while the increase in the dispersion degree of aggregates was found to play a vital role in the observed enhancement of the DTT decay rates for different CB materials. Based on our results, 30 min of sonication is recommended for sample dispersion when measuring the DTT decay rate of CB materials.

PVA reinforced gossypolone and doxorubicin π-π stacking nanoparticles towards tumor targeting and ultralow dose synergistic chemotherapy.

To improve the tumor synergistic therapeutic effects of carrier-free dual-drug delivery systems and realize ultralow dose administration, we developed a tumor targeting and high-efficiency synergistic chemotherapy system (HA-Gn@DPGn NPs) based on polyvinyl alcohol (PVA) reinforced gossypolone (Gn) and doxorubicin (DOX) π-π stacking nanoparticles (DPGn NPs), in which PVA filled the gaps between Gn and DOX and bridged Gn and DOX tightly. Hyaluronic acid modifier hyaluronic acid-gossypolone (HA-Gn) was covered on the surface of DPGn NPs to form HA-Gn@DPGn NPs that procured active targeting properties. This system presented a spherical shape with a uniform hydrodynamic size of 87 ± 6.8 nm, a high drug loading of 80.31%, and high stability. FTIR and UV spectra demonstrated that HA-Gn was covered on the surface of the system and showed significant π-π stacking properties. A considerably low combination index of Gn and DOX (0.1862) was determined at an ultra-low dose of DOX under a Gn : DOX ratio of 50 : 1. HA-Gn@DPGn NPs also demonstrated excellent tumor synergistic therapeutic efficacy (TIR > 87%) at an ultralow dose of DOX and Gn. This system demonstrates high tumor comprehensive synergistic therapeutic efficacy at an ultralow drug dose with multiple favorable therapeutic characteristics, including negligible side effects, tumor targeting ability and thermal-responsive drug release, and thus has considerable potential for tumor synergistic therapy.