Survivorship and risk factors for revision of metal-on-metal hip resurfacing.

Aims: Metal-on-metal hip resurfacing (MoM-HR) has seen decreased usage due to safety and longevity concerns. Joint registries have highlighted the risks in females, smaller hips, and hip dysplasia. This study aimed to identify if reported risk factors are linked to revision in a long-term follow-up of MoM-HR performed by a non-designer surgeon. Methods: A retrospective review of consecutive MoM hip arthroplasties (MoM-HRAs) using Birmingham Hip Resurfacing was conducted. Data on procedure side, indication, implant sizes and orientation, highest blood cobalt and chromium ion concentrations, and all-cause revision were collected from local and UK National Joint Registry records. Results: A total of 243 hips (205 patients (163 male, 80 female; mean age at surgery 55.3 years (range 25.7 to 75.3)) with MoM-HRA performed between April 2003 and October 2020 were included. Mean follow-up was 11.2 years (range 0.3 to 17.8). Osteoarthritis was the most common indication (93.8%), and 13 hips (5.3%; 7M:6F) showed dysplasia (lateral centre-edge angle < 25°). Acetabular cups were implanted at a median of 45.4° abduction (interquartile range 41.9° - 48.3°) and stems neutral or valgus to the native neck-shaft angle. In all, 11 hips (4.5%; one male, ten females) in ten patients underwent revision surgery at a mean of 7.4 years (range 2.8 to 14.2), giving a cumulative survival rate of 94.8% (95% confidence interval (CI) 91.6% to 98.0%) at ten years, and 93.4% (95% CI 89.3% to 97.6%) at 17 years. For aseptic revision, male survivorship was 100% at 17 years, and 89.6% (95% CI 83.1% to 96.7%) at ten and 17 years for females. Increased metal ion levels were implicated in 50% of female revisions, with the remaining being revised for unexplained pain or avascular necrosis. Conclusion: The Birmingham MoM-HR showed 100% survivorship in males, exceeding the National Institute for Health and Care Excellence '5% at ten years' threshold. Female sex and small component sizes are independent risk factors. Dysplasia alone is not a contraindication to resurfacing.

5 year follow up of a hydroxyapatite coated short stem femoral component for hip arthroplasty: a prospective multicentre study.

Short stem, uncemented femoral implants for hip arthroplasty are bone conserving achieving stability through initial metaphyseal press-fit and biological fixation. This study aimed to evaluate the survivorship, mid-term function and health related quality of life outcomes in patients who have undergone total hip arthroplasty (THA) with a fully hydroxyapatite coated straight short stem femoral component with up to 5 years follow-up. 668 patients were recruited to a multicentre study investigating the performance of the cementless Furlong Evolution® stem for THA. 137 patients withdrew at various time points. The mean follow-up was 49 months. Clinical (Harris Hip Score (HHS), radiographic and patient-reported outcome measures-Oxford Hip Score (OHS) and EuroQol 5D (EQ-5D), were recorded pre-operatively and at 6 weeks, 6 months, 1 year, 3 year and 5 year follow ups. At 5-year follow-up, 12 patients underwent revision surgery, representing a cumulative revision rate of 1.8%. Median OHS, HHS and EQ5D scores improved significantly: OHS improved from a pre-operative median of 21 (IQR 14-26) to 47 (IQR 44-48) (p < 0.001). HHS improved from 52 (IQR 40-63) to 98 (IQR 92-100) (p < 0.001) and EQ5D improved from 70 (IQR 50-80) to 85 (IQR 75-95) (p < 0.001). This fully HA-coated straight short femoral stem implant demonstrated acceptable mid-term survivorship and delivered substantial improvements in function and quality of life after THA.

Collaborative Team Training in Virtual Reality is Superior to Individual Learning For Performing Complex Open Surgery: A Randomized Controlled Trial.

OBJECTIVE: To assess whether multiplayer immersive Virtual Reality (iVR) training was superior to single-player training for the acquisition of both technical and nontechnical skills in learning complex surgery. BACKGROUND: Superior teamwork in the operating room (OR) is associated with improved technical performance and clinical outcomes. iVR can successfully train OR staff individually; however, iVR team training has yet to be investigated. METHODS: Forty participants were randomized to individual or team iVR training. Individually trained participants practiced alongside virtual avatar counterparts, whereas teams trained live in pairs. Both groups underwent 5 iVR training sessions over 6 weeks. Subsequently, they completed a real-life assessment in which they performed anterior approach total hip arthroplasty surgery on a high-fidelity model with real equipment in a simulated OR. Teams performed together, and individually trained participants were randomly paired up. Videos were marked by 2 blinded assessors recording the 'Non-Operative Technical Skills for Surgeons, Oxford NOn-TECHnical Skills II and Scrub Practitioners' List of Intraoperative Non-Technical Skills' scores. Secondary outcomes were procedure duration and the number of technical errors. RESULTS: Teams outperformed individually trained participants for nontechnical skills in the real-world assessment (Non-Operative Technical Skills for Surgeons: 13.1±1.5 vs 10.6±1.6, P = 0.002, Non-TECHnical Skills II score: 51.7 ± 5.5 vs 42.3 ± 5.6, P = 0.001 and Scrub Practitioners' List of Intraoperative Non-Technical Skills: 10 ± 1.2 vs 7.9 ± 1.6, P = 0.004). They completed the assessment 33% faster (28.2 minutes ± 5.5 vs 41.8 ± 8.9, P < 0.001), and made fewer than half the number of technical errors (10.4 ± 6.1 vs 22.6 ± 5.4, P < 0.001). CONCLUSIONS: Multiplayer training leads to faster surgery with fewer technical errors and the development of superior nontechnical skills.

A Delphi consensus statement for digital surgery.

The use of digital technology is increasing rapidly across surgical specialities, yet there is no consensus for the term 'digital surgery'. This is critical as digital health technologies present technical, governance, and legal challenges which are unique to the surgeon and surgical patient. We aim to define the term digital surgery and the ethical issues surrounding its clinical application, and to identify barriers and research goals for future practice. 38 international experts, across the fields of surgery, AI, industry, law, ethics and policy, participated in a four-round Delphi exercise. Issues were generated by an expert panel and public panel through a scoping questionnaire around key themes identified from the literature and voted upon in two subsequent questionnaire rounds. Consensus was defined if >70% of the panel deemed the statement important and <30% unimportant. A final online meeting was held to discuss consensus statements. The definition of digital surgery as the use of technology for the enhancement of preoperative planning, surgical performance, therapeutic support, or training, to improve outcomes and reduce harm achieved 100% consensus agreement. We highlight key ethical issues concerning data, privacy, confidentiality and public trust, consent, law, litigation and liability, and commercial partnerships within digital surgery and identify barriers and research goals for future practice. Developers and users of digital surgery must not only have an awareness of the ethical issues surrounding digital applications in healthcare, but also the ethical considerations unique to digital surgery. Future research into these issues must involve all digital surgery stakeholders including patients.

The metabolic equivalent of task score : a useful metric for comparing high-functioning hip arthroplasty patients.

AIMS: This study investigates the use of the metabolic equivalent of task (MET) score in a young hip arthroplasty population, and its ability to capture additional benefit beyond the ceiling effect of conventional patient-reported outcome measures. METHODS: From our electronic database of 751 hip arthroplasty procedures, 221 patients were included. Patients were excluded if they had revision surgery, an alternative hip procedure, or incomplete data either preoperatively or at one-year follow-up. Included patients had a mean age of 59.4 years (SD 11.3) and 54.3% were male, incorporating 117 primary total hip and 104 hip resurfacing arthroplasty operations. Oxford Hip Score (OHS), EuroQol five-dimension questionnaire (EQ-5D), and the MET were recorded preoperatively and at one-year follow-up. The distribution was examined reporting the presence of ceiling and floor effects. Validity was assessed correlating the MET with the other scores using Spearman's rank correlation coefficient and determining responsiveness. A subgroup of 93 patients scoring 48/48 on the OHS were analyzed by age, sex, BMI, and preoperative MET using the other metrics to determine if differences could be established despite scoring identically on the OHS. RESULTS: Postoperatively the OHS and EQ-5D demonstrate considerable negatively skewed distributions with ceiling effects of 41.6% and 53.8%, respectively. The MET was normally distributed postoperatively with no relevant ceiling effect. Weak-to-moderate significant correlations were found between the MET and the other two metrics. In the 48/48 subgroup, no differences were found comparing groups with the EQ-5D, however significantly higher mean MET scores were demonstrated for patients aged < 60 years (12.7 (SD 4.7) vs 10.6 (SD 2.4), p = 0.008), male patients (12.5 (SD 4.5) vs 10.8 (SD 2.8), p = 0.024), and those with preoperative MET scores > 6 (12.6 (SD 4.2) vs 11.0 (SD 3.3), p = 0.040). CONCLUSION: The MET is normally distributed in patients following hip arthroplasty, recording levels of activity which are undetectable using the OHS. Cite this article: Bone Joint Res 2022;11(5):317-326.

Cognitive task analysis-based training in surgery: a meta-analysis.

BACKGROUND: Reduced hands-on operating experience has challenged the development of complex decision-making skills for modern surgical trainees. Cognitive task analysis- (CTA-)based training is a methodical solution to extract the intricate cognitive processes of experts and impart this information to novices. Its use has been successful in high-risk industries such as the military and aviation, though its application for learning surgery is more recent. This systematic review aims to synthesize the evidence evaluating the efficacy of CTA-based training to enable surgeons to acquire procedural skills and knowledge. METHODS: The PRISMA guidelines were followed. Four databases, including MEDLINE, EMBASE, Web of Science and Cochrane CENTRAL, were searched from inception to February 2021. Randomized controlled trials and observational studies evaluating the training effect of CTA-based interventions on novices' procedural knowledge or technical performance were included. Meta-analyses were performed using a random-effects model. RESULTS: The initial search yielded 2205 articles, with 12 meeting the full inclusion criteria. Seven studies used surgical trainees as study subjects, four used medical students and one study used a combination. Surgical trainees enrolled into CTA-based training groups had enhanced procedural knowledge (standardized mean difference (SMD) 1.36 (95 per cent c.i. 0.67 to 2.05), P < 0.001) and superior technical performance (SMD 2.06 (95 per cent c.i. 1.17 to 2.96), P < 0.001) in comparison with groups that used conventional training methods. CONCLUSION: CTA-based training is an effective way to learn the cognitive skills of a surgical procedure, making it a useful adjunct to current surgical training.

Immersive virtual reality enables technical skill acquisition for scrub nurses in complex revision total knee arthroplasty.

INTRODUCTION: Immersive Virtual Reality (iVR) is a novel technology which can enhance surgical training in a virtual environment without supervision. However, it is untested for the training to select, assemble and deliver instrumentation in orthopaedic surgery-typically performed by scrub nurses. This study investigates the impact of an iVR curriculum on this facet of the technically demanding revision total knee arthroplasty. MATERIALS AND METHODS: Ten scrub nurses completed training in four iVR sessions over a 4-week period. Initially, nurses completed a baseline real-world assessment, performing their role with real equipment in a simulated operation assessment. Each subsequent iVR session involved a guided mode, where the software taught participants the procedural choreography and assembly of instrumentation in a simulated operating room. In the latter three sessions, nurses also undertook an assessment in iVR. Outcome measures were related to procedural sequence, duration of surgery and efficiency of movement. Transfer of skills from iVR to the real world was assessed in a post-training simulated operation assessment. A pre- and post-training questionnaire assessed the participants knowledge, confidence and anxiety. RESULTS: Operative time reduced by an average of 47% across the 3 unguided sessions (mean 55.5 ± 17.6 min to 29.3 ± 12.1 min, p > 0.001). Assistive prompts reduced by 75% (34.1 ± 16.8 to 8.6 ± 8.8, p < 0.001), dominant hand motion by 28% (881.3 ± 178.5 m to 643.3 ± 119.8 m, p < 0.001) and head motion by 36% (459.9 ± 99.7 m to 292.6 ± 85.3 m, p < 0.001). Real-world skill improved from 11% prior to iVR training to 84% correct post-training. Participants reported increased confidence and reduced anxiety in scrubbing for rTKA procedures (p < 0.001). CONCLUSIONS: For scrub nurses, unfamiliarity with complex surgical procedures or equipment is common. Immersive VR training improved their understanding, technical skills and efficiency. These iVR-learnt skills transferred into the real world.

How to prioritize patients and redesign care to safely resume planned surgery during the COVID-19 pandemic.

AIMS: Restarting planned surgery during the COVID-19 pandemic is a clinical and societal priority, but it is unknown whether it can be done safely and include high-risk or complex cases. We developed a Surgical Prioritization and Allocation Guide (SPAG). Here, we validate its effectiveness and safety in COVID-free sites. METHODS: A multidisciplinary surgical prioritization committee developed the SPAG, incorporating procedural urgency, shared decision-making, patient safety, and biopsychosocial factors; and applied it to 1,142 adult patients awaiting orthopaedic surgery. Patients were stratified into four priority groups and underwent surgery at three COVID-free sites, including one with access to a high dependency unit (HDU) or intensive care unit (ICU) and specialist resources. Safety was assessed by the number of patients requiring inpatient postoperative HDU/ICU admission, contracting COVID-19 within 14 days postoperatively, and mortality within 30 days postoperatively. RESULTS: A total of 1,142 patients were included, 47 declined surgery, and 110 were deemed high-risk or requiring specialist resources. In the ten-week study period, 28 high-risk patients underwent surgery, during which 68% (13/19) of Priority 2 (P2, surgery within one month) patients underwent surgery, and 15% (3/20) of P3 (< three months) and 16% (11/71) of P4 (> three months) groups. Of the 1,032 low-risk patients, 322 patients underwent surgery. Overall, 21 P3 and P4 patients were expedited to 'Urgent' based on biopsychosocial factors identified by the SPAG. During the study period, 91% (19/21) of the Urgent group, 52% (49/95) of P2, 36% (70/196) of P3, and 26% (184/720) of P4 underwent surgery. No patients died or were admitted to HDU/ICU, or contracted COVID-19. CONCLUSION: Our widely generalizable model enabled the restart of planned surgery during the COVID-19 pandemic, without compromising patient safety or excluding high-risk or complex cases. Patients classified as Urgent or P2 were most likely to undergo surgery, including those deemed high-risk. This model, which includes assessment of biopsychosocial factors alongside disease severity, can assist in equitably prioritizing the substantial list of patients now awaiting planned orthopaedic surgery worldwide. Cite this article: Bone Jt Open 2021;2(2):134-140.

Calipered kinematic alignment technique for implanting a Medial Oxford®: A technical note.

This note describes a surgical technique to kinematically align a medial Oxford® UKA. Applying kinematic alignment principles is an alternative, personalised, physiological, and potentially clinically advantageous method for implanting the medial Oxford® UKA. Further investigations are needed to better define the reproducibility and clinical impact of this new surgical technique.

Tibial Plateau Fracture: Anatomy, Diagnosis and Management.

Tibial plateau fractures are peri-articular knee fractures of the proximal tibia. The presentation is dependent on the mechanism of injury. The tibial plateau is the bony platform of the distal half of the knee joint, and is made up of a medial and lateral condyle separated by the intercondylar eminence. The presentation of tibial plateau fractures can vary greatly as a result of the bimodal mechanism of injury and patient characteristics. The patient should be assessed for life- and limb-threatening injuries in accordance with British Orthopaedic Association Standards of Trauma guidelines. Imaging is undertaken to understand configuration of the fracture, which is classified by the Schatzker classification. Definitive management of the fracture depends on the severity, ranging from conservative to surgical management. Surgery is required for more severe tibial plateau fractures to restore articular congruity, mechanical alignment, ligamentous stability and to permit early mobilisation. Medium-term functional outcome after tibial plateau fractures is generally excellent when anatomy and stability is restored. At least half of patients return to their original level of physical activity. Surgical management of tibial plateau fractures is not without complication. Risk factors include postoperative arthritis, bicondylar and comminuted fractures, meniscal removal, instability, malalignment and articular incongruity. Tibial plateau fractures account for 1% of all fractures, and typically occur either as a fragility fracture or secondary to a high-energy impact. These latter injuries are associated with extensive soft tissue injury, life- and limb-threatening complications and long-term sequelae. While outcomes are generally good, severe injuries are at higher risk of infection and post-traumatic arthritis requiring knee arthroplasty. This article considers the anatomy, diagnosis and evidence-based management strategies for tibial plateau fracture.

Reduced-dose computed tomography is the most accurate method to measure ceramic hip resurfacing cup version.

BACKGROUND: A precise assessment of cup version after hip resurfacing is generally requested, especially in clinical trials or in case of complications. AIMS: To identify which diagnostic imaging modality, between AP pelvis X-rays, the AP Pelvis CT Scout image and reduced-dose axial CT scan, is the most precise to assess cup version of an all-ceramic hip resurfacing implant in a first-in-human clinical trial. METHODS: We retrospectively assessed the cup version of the first 20 patients who underwent an experimental all-ceramic hip resurfacing on AP pelvis X-rays (0.8 mSv of radiation), AP pelvis CT scout images (0.016 mSv) and axial CT slices performed using a reduced dose protocol (0.3 mSv). The intra-observer and inter-observer reliabilities were calculated. RESULTS: Reduced dose Pelvis CT scan was the most precise imaging modality to detect cup version (Pearson Correlation Coefficient, PCC = 0.98, p < 0.001). The AP Pelvis CT Scout image was found to be sufficient to measure cup version within an acceptable margin of tolerance (mean difference ±â€¯4.7° from pelvis CT scan) and highly correlated to axial pelvis CT scan measurements (PCC 0.97, p < 0.001). Analysis of cup version from AP X-rays poorly correlated with measurements from Pelvis CT (PCC 0.59, p = 0.006). CONCLUSIONS: Due to lower radiation exposure and highest accuracy, reduced dose CT is a valid modality to measure acetabular cup version after ceramic hip resurfacing. Plain X-rays are not accurate nor precise to measure version, whereas high agreement of measurements between AP Pelvis CT Scout and axial pelvis CT scan was found.

Fully Immersive Virtual Reality for Total Hip Arthroplasty: Objective Measurement of Skills and Transfer of Visuospatial Performance After a Competency-Based Simulation Curriculum.

BACKGROUND: Fully immersive virtual reality (VR) uses headsets to situate a surgeon in a virtual operating room to perform open surgical procedures. The aims of this study were to determine (1) if a VR curriculum for training residents to perform anterior approach total hip replacement (AA-THR) was feasible, (2) if VR enabled residents' performance to be measured objectively, and (3) if cognitive and motor skills that were learned with use of VR were transferred to the physical world. METHODS: The performance of 32 orthopaedic residents (surgical postgraduate years [PGY]-1 through 4) with no prior experience with AA-THR was measured during 5 consecutive VR training and assessment sessions. Outcome measures were related to procedural sequence, efficiency of movement, duration of surgery, and visuospatial precision in acetabular component positioning and femoral neck osteotomy, and were compared with the performance of 4 expert hip surgeons to establish competency-based criteria. Pretraining and post-training assessments on dry bone models were used to assess the transfer of visuospatial skills from VR to the physical world. RESULTS: Residents progressively developed surgical skills in VR on a learning curve through repeated practice, plateauing, on average, after 4 sessions (4.1 ± 0.6 hours); they reached expert VR levels for 9 of 10 metrics (except femoral osteotomy angle). Procedural errors were reduced by 79%, assistive prompts were reduced by 70%, and procedural duration was reduced by 28%. Dominant and nondominant hand movements were reduced by 35% and 36%, respectively, and head movement was reduced by 44%. Femoral osteotomy was performed more accurately, and acetabular implant orientation improved in VR assessments. In the physical world assessments, experts were more accurate than residents prior to simulation, but were matched by residents after simulation for all of the metrics except femoral osteotomy angle. The residents who performed best in VR were the most accurate in the physical world, while 2 residents were unable to achieve competence despite sustained practice. CONCLUSIONS: For novice surgeons learning AA-THR skills, fully immersive VR technology can objectively measure progress in the acquisition of surgical skills as measured by procedural sequence, efficiency of movement, and visuospatial accuracy. Skills learned in this environment are transferred to the physical environment.

A single-use, size-specific, nylon arthroplasty guide: a preliminary study for hip resurfacing.

INTRODUCTION: In arthroplasty surgery, positioning of the components must be accurate and reproducible to avoid complications. Conventional guides are often used to align a component, but they require surgical skill and experience, and are prone to error. To this end, a single-use, size-specific, nylon guide (single-use nylon guide) has been developed for the purpose of increasing the accuracy without adding extra cost to the operation. The effectiveness of this type of guide was evaluated in using a synthetic bone study. METHODS: A total of 66 synthetic femurs with the same osteoarthritic morphology were prepared. 3 surgeons participated in the experiments, and each surgeon created a drill hole for the femoral component by using the single-use nylon guide or a commercially-available, conventional, metal, neck-based guide (conventional guide). Anteversion, inclination, and insertion point acquired by the guide were compared between the guides, between surgeons, and to the computer-based plan. RESULTS: Anteversion acquired by the single-use nylon guide (6.7° [4.9-11.5°]) was significantly closer to the plan (14.6°) than that acquired by the conventional guide (4.3° [2.4-8.6°]) (p = 0.03). The insertion point was also significantly closer to the plan for the single-use nylon guide (3.8 mm ± 1.6 mm) than the conventional guide (5.7 mm ± 2.4 mm) (p < 0.001). No significant difference was found for the inclination (p = 0.76). CONCLUSION: A single-use, size-specific nylon guide was effective in acquiring a higher accuracy and precision in anteversion and insertion point than a conventional guide in this synthetic bone, hip resurfacing arthroplasty study. The use of single-use guides in other orthopaedic procedures should be explored.

A Multicenter Randomized Controlled Trial Evaluating the Effectiveness of Cognitive Training for Anterior Approach Total Hip Arthroplasty.

BACKGROUND: For total hip arthroplasty (THA), cognitive training prior to performing real surgery may be an effective adjunct alongside simulation to shorten the learning curve. This study sought to create a cognitive training tool (CTT) to perform anterior approach (AA)-THA, which was validated by expert surgeons, and test its use as a training tool compared with conventional material. METHODS: We employed a modified Delphi method with 4 expert surgeons from 3 international centers of excellence. Surgeons were independently observed performing THA before undergoing semistructured cognitive task analysis (CTA) and before completing successive rounds of surveys until a consensus was reached. Thirty-six surgical residents (postgraduate year [PGY]-1 through PGY-4) were randomized to cognitive training or training with a standard operation manual with surgical videos before performing a simulated AA-THA. RESULTS: The consensus CTA defined THA in 11 phases, in which were embedded 46 basic steps, 36 decision points, and 42 critical errors and linked strategies. This CTA was mapped onto an open-access web-based CTT. Surgeons who prepared with the CTT performed a simulated THA 35% more quickly (time, mean 28 versus 38 minutes) with 69% fewer errors in instrument selection (mean 29 versus 49 instances), and required 92% fewer prompts (mean 13 versus 25 instances). They were more accurate in acetabular cup orientation (inclination error, mean 8° versus 10°; anteversion error, mean 14° versus 22°). CONCLUSIONS: This validated CTT for arthroplasty provides structure for competency-based learning. It is more effective at preparing orthopaedic trainees for a complex procedure than conventional materials, as well as for learning sequence, instrumentation utilization, and motor skills. CLINICAL RELEVANCE: Cognitive training combines education on decision-making, knowledge, and technical skill. It is an inexpensive technique to teach surgeons to perform hip arthroplasty and is more effective than current preparation methods.

Virtual reality training improves trainee performance in total hip arthroplasty: a randomized controlled trial.

AIMS: Arthroplasty skills need to be acquired safely during training, yet operative experience is increasingly hard to acquire by trainees. Virtual reality (VR) training using headsets and motion-tracked controllers can simulate complex open procedures in a fully immersive operating theatre. The present study aimed to determine if trainees trained using VR perform better than those using conventional preparation for performing total hip arthroplasty (THA). PATIENTS AND METHODS: A total of 24 surgical trainees (seven female, 17 male; mean age 29 years (28 to 31)) volunteered to participate in this observer-blinded 1:1 randomized controlled trial. They had no prior experience of anterior approach THA. Of these 24 trainees, 12 completed a six-week VR training programme in a simulation laboratory, while the other 12 received only conventional preparatory materials for learning THA. All trainees then performed a cadaveric THA, assessed independently by two hip surgeons. The primary outcome was technical and non-technical surgical performance measured by a THA-specific procedure-based assessment (PBA). Secondary outcomes were step completion measured by a task-specific checklist, error in acetabular component orientation, and procedure duration. RESULTS: VR-trained surgeons performed at a higher level than controls, with a median PBA of Level 3a (procedure performed with minimal guidance or intervention) versus Level 2a (guidance required for most/all of the procedure or part performed). VR-trained surgeons completed 33% more key steps than controls (mean 22 (sd 3) vs 12 (sd 3)), were 12° more accurate in component orientation (mean error 4° (sd 6°) vs 16° (sd 17°)), and were 18% faster (mean 42 minutes (sd 7) vs 51 minutes (sd 9)). CONCLUSION: Procedural knowledge and psychomotor skills for THA learned in VR were transferred to cadaveric performance. Basic preparatory materials had limited value for trainees learning a new technique. VR training advanced trainees further up the learning curve, enabling highly precise component orientation and more efficient surgery. VR could augment traditional surgical training to improve how surgeons learn complex open procedures. Cite this article: Bone Joint J 2019;101-B:1585-1592.

Diagnostic Accuracy of Serum, Synovial, and Tissue Testing for Chronic Periprosthetic Joint Infection After Hip and Knee Replacements: A Systematic Review.

BACKGROUND: Chronic periprosthetic joint infection (PJI) is a devastating complication that can occur following total joint replacement. Patients with chronic PJI report a substantially lower quality of life and face a higher risk of short-term mortality. Establishing a diagnosis of chronic PJI is challenging because of conflicting guidelines, numerous tests, and limited evidence. Delays in diagnosing PJI are associated with poorer outcomes and morbid revision surgery. The purpose of this systematic review was to compare the diagnostic accuracy of serum, synovial, and tissue-based tests for chronic PJI. METHODS: This review adheres to the Cochrane Collaboration's diagnostic test accuracy methods for evidence searching and syntheses. A detailed search of MEDLINE, Embase, the Cochrane Library, and the grey literature was performed to identify studies involving the diagnosis of chronic PJI in patients with hip or knee replacement. Eligible studies were assessed for quality and bias using the Quality Assessment of Diagnostic Accuracy Studies-2 (QUADAS-2) tool. Meta-analyses were performed on tests with sufficient data points. Summary estimates and hierarchical summary receiver operating characteristic (HSROC) curves were obtained using a bivariate model. RESULTS: A total of 12,616 citations were identified, and 203 studies met the inclusion criteria. Of these 203 studies, 170 had a high risk of bias. Eighty-three unique PJI diagnostic tests were identified, and 17 underwent meta-analyses. Laboratory-based synovial alpha-defensin tests and leukocyte esterase reagent (LER) strips (2+) had the best performance, followed by white blood-cell (WBC) count, measurement of synovial C-reactive protein (CRP) level, measurement of the polymorphonuclear neutrophil percentage (PMN%), and the alpha-defensin lateral flow test kit (Youden index ranging from 0.78 to 0.94). Tissue-based tests and 3 serum tests (measurement of interleukin-6 [IL-6] level, CRP level, and erythrocyte sedimentation rate [ESR]) had a Youden index between 0.61 to 0.75 but exhibited poorer performance compared with the synovial tests mentioned above. CONCLUSIONS: The quality of the literature pertaining to chronic PJI diagnostic tests is heterogeneous, and the studies are at a high risk for bias. We believe that greater transparency and more complete reporting in studies of diagnostic test results should be mandated by peer-reviewed journals. The available literature suggests that several synovial fluid-based tests perform well for diagnosing chronic PJI and their use is recommended in the work-up of any suspected case of chronic PJI. LEVEL OF EVIDENCE: Diagnostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Can an Augmented Reality Headset Improve Accuracy of Acetabular Cup Orientation in Simulated THA? A Randomized Trial.

BACKGROUND: Accurate implant orientation reduces wear and increases stability in arthroplasty but is a technically demanding skill. Augmented reality (AR) headsets overlay digital information on top of the real world. We have developed an enhanced AR headset capable of tracking bony anatomy in relation to an implant, but it has not yet been assessed for its suitability as a training tool for implant orientation. QUESTIONS/PURPOSES: (1) In the setting of simulated THA performed by novices, does an AR headset improve the accuracy of acetabular component positioning compared with hands-on training by an expert surgeon? (2) What are trainees' perceptions of the AR headset in terms of realism of the task, acceptability of the technology, and its potential role for surgical training? METHODS: Twenty-four study participants (medical students in their final year of school, who were applying to surgery residency programs, and who had no prior arthroplasty experience) participated in a randomized simulation trial using an AR headset and a simulated THA. Participants were randomized to two groups completing four once-weekly sessions of baseline assessment, training, and reassessment. One group trained using AR (with live holographic orientation feedback) and the other received one-on-one training from a hip arthroplasty surgeon. Demographics and baseline performance in orienting an acetabular implant to six patient-specific values on the phantom pelvis were collected before training and were comparable. The orientation error in degrees between the planned and achieved orientations was measured and was not different between groups with the numbers available (surgeon group mean error ± SD 16° ± 7° versus AR 14° ± 7°; p = 0.22). Participants trained by AR also completed a validated posttraining questionnaire evaluating their experiences. RESULTS: During the four training sessions, participants using AR-guidance had smaller mean (± SD) errors in orientation than those receiving guidance from the surgeon: 1° ± 1° versus AR 6° ± 4°, p < 0.001. In the fourth session's assessment, participants in both groups had improved (surgeon group mean improvement 6°, 95% CI, 4-8°; p < 0.001 versus AR group 9°, 95% CI 7-10°; p < 0.001). There was no difference between participants in the surgeon-trained and AR-trained group: mean difference 1.2°, 95% CI, -1.8 to 4.2°; p = 0.281. In posttraining evaluation, 11 of 12 participants would use the AR platform as a training tool for developing visuospatial skills and 10 of 12 for procedure-specific rehearsals. Most participants (11 of 12) stated that a combination of an expert trainer for learning and AR for unsupervised training would be preferred. CONCLUSIONS: A novel head-mounted AR platform tracked an implant in relation to bony anatomy to a clinically relevant level of accuracy during simulated THA. Learners were equally accurate, whether trained by AR or a surgeon. The platform enabled the use of real instruments and gave live feedback; AR was thus considered a feasible and valuable training tool as an adjunct to expert guidance in the operating room. Although there were no differences in accuracy between the groups trained using AR and those trained by an expert surgeon, we believe the tool may be useful in education because it demonstrates that some motor skills for arthroplasty may be learned in an unsupervised setting. Future studies will evaluate AR-training for arthroplasty skills other than cup orientation and its transfer validity to real surgery. LEVEL OF EVIDENCE: Level I, therapeutic study.

Evidence in managing traumatic anterior shoulder instability: a scoping review.

BACKGROUND: Traumatic anterior shoulder instability (TASI) accounts for 95% of glenohumeral dislocations and is associated with soft tissue and bony pathoanatomies. Non-operative treatments include slings, bracing and physiotherapy. Operative treatment is common, including bony and soft-tissue reconstructions performed through open or arthroscopic approaches. There is management variation in patient pathways for TASI including when to refer and when to operate. METHODS: A scoping review of systematic reviews, randomised controlled trials, comparing operative with non-operative treatments and different operative treatments were the methods followed. Search was conducted for online bibliographic databases and reference lists of relevant articles from 2002 to 2012. Systematic reviews were appraised using AMSTAR (assessment of multiple systematic reviews) criteria. Controlled trials were appraised using the CONSORT (consolidation of standards of reporting trials) tool. RESULTS: Analysis of the reviews did not offer strong evidence for a best treatment option for TASI. No studies directly compare open, arthroscopic and structured rehabilitation programmes. Evaluation of arthroscopic studies and comparison to open procedures was difficult, as many of the arthroscopic techniques included are no longer used. Recurrence rate was generally considered the best measure of operative success, but was poorly documented throughout all studies. There was conflicting evidence on the optimal timing of intervention and no consensus on any scoring system or outcome measure. CONCLUSIONS: There is no agreement about which validated outcome tool should be used for assessing shoulder instability in patients. There is limited evidence regarding the comparative effectiveness of surgical and non-surgical treatment of TASI, including a lack of evidence regarding the optimal timing of such treatments. There is a need for a well-structured randomised control trial to assess the efficacy of surgical and non-surgical interventions for this common type of shoulder instability.

Validating a global rating scale to monitor individual resident learning curves during arthroscopic knee meniscal repair.

PURPOSE: To determine whether a global rating scale (GRS) with construct validity can also be used to assess the learning curve of individual orthopaedic trainees during simulated arthroscopic knee meniscal repair. METHODS: An established arthroscopic GRS was used to evaluate the technical skill of 19 orthopaedic residents performing a standardized arthroscopic meniscal repair in a bioskills laboratory. The residents had diagnostic knee arthroscopy experience but no experience with arthroscopic meniscal repair. Residents were videotaped performing an arthroscopic meniscal repair on 12 separate occasions. Their performance was assessed by use of the GRS and motion analysis objectively measuring the time taken to complete tasks, path length of the subject's hands, and number of hand movements. One author assessed all 228 videos, whereas 2 other authors rated 34 randomly selected videos, testing the interobserver reliability of the GRS. The validity of the GRS was tested against the motion analysis. RESULTS: Objective assessment with motion analysis defined the surgeon's learning curve, showing significant improvement by each subject over 12 episodes (P < .0001). The GRS also showed a similar learning curve with significant improvements in performance (P < .0001). The median GRS score improved from 15 of 34 (interquartile range, 14 to 17) at baseline to 22 of 34 (interquartile range, 19 to 23) in the final period. There was a moderate correlation (P < .0001, Spearman test) between the GRS and motion analysis parameters (r = -0.58 for time, r = -0.58 for path length, and r = -0.51 for hand movements). The inter-rater reliability among 3 trained assessors using the GRS was excellent (Cronbach α = 0.88). CONCLUSIONS: When compared with motion analysis, an established arthroscopic GRS, with construct validity, also offers a moderately feasible method to monitor the learning curve of individual residents during simulated knee meniscal repair. CLINICAL RELEVANCE: An arthroscopic GRS can be used for monitoring skill improvement during knee meniscal repair and has the potential for use as a training and assessment tool in the real operating room.