Facial Gingival Changes With and Without Socket Gap Grafting Following Single Maxillary Anterior Immediate Tooth Replacement: One-Year Results.

This 1-year prospective study evaluated horizontal and vertical facial gingival tissue changes after immediate implant placement and provisionalization (IIPP) with and without bone graft in the implant-socket gap (ISG). During IIPP, 10 patients received bone graft material in the ISG (G group), while the other 10 patients did not (NG group). The implants were evaluated for implant stability quotient (ISQ), modified plaque index (mPI), modified bleeding index (mBI), marginal bone level (MBL), facial gingival level (FGL), and facial gingival profile (FGP) changes. The mean ISQ value at 9-month follow-up was statistically significantly greater than on the day of implant surgery (P < .05). The mPI and mBI scores demonstrated that patients were able to maintain a good level of hygiene. There were no statistically significant differences in the mean MBL changes between the G and NG groups (P > .05). There were statistically significant differences in FGL changes between the G (-0.77 mm) and NG (-1.35 mm) groups (P = .035). There were no statistically significant differences in FGP changes between the G and NG groups (P > .05). However, statistically significant differences were noted in FGP change between the 3-12 and 0-12 month intervals in both groups (P < .05). Within the limitations of this study, although no significant differences were noted in FGP changes between groups, G group experienced significantly less FGL changes than NG group. Bone graft material placement into ISG seems to be advantageous for tissue preservation during IIPP. However, future long-term studies, with larger sample size, are needed to validate the efficacy of such procedure.

Histomorphometric Analysis of Maxillary Sinus Grafts: A Pilot Study.

PURPOSE: This pilot study evaluated and compared the degree of new bone formation following maxillary sinus graft (MSG) using three different bone graft materials. MATERIAL AND METHODS: Patients with an edentulous posterior maxilla (unilateral or bilateral) were included in this study and underwent a two-stage procedure. Each sinus was randomly assigned one of the three graft materials: anorganic bovine bone mineral (ABBM), anorganic equine bone mineral (AEBM), or mineralized cancellous bone allograft (MCBA). Bone core samples were obtained from the lateral wall of the grafted sites at least 8 months after MSG. Bone quality was evaluated during bone core retrieval. The samples were histomorphometrically analyzed using Kruskal-Wallis and Dunn-Bonferroni tests at the significance level of α = .05. RESULTS: A total of 28 sinuses (14 unilateral and 7 bilateral) from 21 subjects, with a mean age of 61.5 (range, 33-75) years, were included in the study. Twenty-eight bone cores (ABBM [n = 9], AEBM [n = 9], and MCBA [n = 10]) were obtained at a mean healing time of 9.1 (range, 8-12) months. Six maxillary sinus membrane perforations (≤ 5 mm) were noted and repaired during surgery (21.4%). Histomorphometric analysis of the harvested bone cores revealed statistically significant differences in the percentage of vital bone (VB%), residual bone materials (RBM%), and connective tissue/marrow (CT%) among the different graft materials (Kruskal-Wallis; P < .05). The VB% in the MCBA group (32.0% ± 12.4%) was significantly greater than those in the ABBM (10.9% ± 8.9%) and AEBM (9.1% ± 5.9%) groups (P < .05). The RBM% in the MCBA group (5.5% ± 5.7%) was, however, significantly less than those in the ABBM (34.3% ± 12.1%) and AEBM (38.9% ± 5.3%) groups (P < .05). There were no significant differences in VB% and RBM% between ABBM and AEBM (P = 1.0). Newly formed bone and residual graft materials were integrated into the surrounding tissue with no sign of inflammation or foreign-body reaction. CONCLUSION: Within the confines of the study, MCBA has significantly greater new bone formation than ABBM and AEBM. AEBM showed comparable histomorphometric results in all parameters (VB%, RBM%, CT%) to ABBM.

Histomorphometric Analysis of Maxillary Sinus Grafts: A Pilot Study.

PURPOSE: This pilot study evaluated and compared the degree of new bone formation following maxillary sinus graft (MSG) using three different bone graft materials. MATERIAL AND METHODS: Patients with an edentulous posterior maxilla (unilateral or bilateral) were included in this study and underwent a two-stage procedure. Each sinus was randomly assigned one of the three graft materials: anorganic bovine bone mineral (ABBM), anorganic equine bone mineral (AEBM), or mineralized cancellous bone allograft (MCBA). Bone core samples were obtained from the lateral wall of the grafted sites at least 8 months after MSG. Bone quality was evaluated during bone core retrieval. The samples were histomorphometrically analyzed using Kruskal-Wallis and Dunn-Bonferroni tests at the significance level of α = .05. RESULTS: A total of 28 sinuses (14 unilateral and 7 bilateral) from 21 subjects, with a mean age of 61.5 (range, 33-75) years, were included in the study. Twenty-eight bone cores (ABBM [n = 9], AEBM [n = 9], and MCBA [n = 10]) were obtained at a mean healing time of 9.1 (range, 8-12) months. Six maxillary sinus membrane perforations (≤ 5 mm) were noted and repaired during surgery (21.4%). Histomorphometric analysis of the harvested bone cores revealed statistically significant differences in the percentage of vital bone (VB%), residual bone materials (RBM%), and connective tissue/marrow (CT%) among the different graft materials (Kruskal-Wallis; P < .05). The VB% in the MCBA group (32.0% ± 12.4%) was significantly greater than those in the ABBM (10.9% ± 8.9%) and AEBM (9.1% ± 5.9%) groups (P < .05). The RBM% in the MCBA group (5.5% ± 5.7%) was, however, significantly less than those in the ABBM (34.3% ± 12.1%) and AEBM (38.9% ± 5.3%) groups (P < .05). There were no significant differences in VB% and RBM% between ABBM and AEBM (P = 1.0). Newly formed bone and residual graft materials were integrated into the surrounding tissue with no sign of inflammation or foreign-body reaction. CONCLUSION: Within the confines of the study, MCBA has significantly greater new bone formation than ABBM and AEBM. AEBM showed comparable histomorphometric results in all parameters (VB%, RBM%, CT%) to ABBM.

Vertical Bone Grafting and Periosteal Vertical Mattress Suture for the Fixation of Resorbable Membranes and Stabilization of Particulate Grafts in Horizontal Guided Bone Regeneration to Achieve More Predictable Results: A Technical Report.

Osteosynthesis screws and titanium or resorbable pins have been recommended for fixing guided bone regeneration (GBR) membranes and stabilizing the graft. However, the removal of fixation screws or pins often requires an additional surgical procedure. This article presents a periosteal suturing technique with resorbable sutures for the fixation of grafts and membranes in GBR in single implant sites. This technique avoids potential complications of using fixation screws or pins, such as perforation of the roots when inserting the pins, and eliminates the need for a second retrieval surgery.

Marginal bone response of implants with platform switching and non-platform switching abutments in posterior healed sites: a 1-year prospective study.

OBJECTIVES: This 1-year prospective study evaluated the implant success rate and marginal bone response of non-submerged implants with platform and non-platform switching abutments in posterior healed sites. MATERIAL AND METHODS: Nineteen patients (9 male, 10 female) with posterior partially edentulous spaces, between the ages of 23 and 76 (mean = 55.4 years), were included in this study. A total of 30 implants (15 implants restored with platform switching [PS] abutments [control] and 15 implants restored with non-platform switching [NPS] abutments [test]) were assigned between two groups using a randomization procedure. The definitive abutments with conical connections were placed at the time of surgery, and the definitive restorations were placed at 3 months. All patients were evaluated clinically and radiographically using standardized radiographs at time of implant placement (0), 3, 6 and 12 months after implant placement. Data were analyzed using Friedman test with post hoc pairwise comparisons, Mann-Whitney U-test, and Pearson's chi-square test at the significance level of α = 0.05. RESULTS: At 12 months, all 30 implants remained osseointegrated corresponding to a 100% success rate. The overall mean marginal bone level change at 12 months was -0.04 ± 0.08 mm for PS group and -0.19 ± 0.16 mm for NPS group. Statistically significant difference in the marginal bone level change was observed between groups at 0 to 12 months and 3 to 12 months (P < 0.05). CONCLUSIONS: This 1-year randomized control study suggests that when a conical implant-abutment connection is present, similar peri-implant tissue responses can be achieved with platform switching and non-platform switching abutments.

Effects of connective tissue grafting on the facial gingival level following single immediate implant placement and provisionalization in the esthetic zone: a 1-year randomized controlled prospective study.

PURPOSE: This 1-year randomized controlled prospective study evaluated the implant success rate and peri-implant tissue response following single immediate implant placement and provisionalization (IIPP) with and without subepithelial connective tissue graft (SCTG) in the esthetic zone. MATERIALS AND METHODS: Implants were placed either IIPP with SCTG (test group) or IIPP without SCTG (control group). The implants were evaluated both clinically and radiographically before surgery, immediately after implant placement, and 3, 6, and 12 months after implant placement. Data were analyzed using Friedman, Wilcoxon signed-rank, and Mann-Whitney U tests at the significance level of α = .05. RESULTS: Twenty implants (10 test, 10 control) were placed in 20 patients (7 men, 13 women) between the ages of 27 and 87 (mean age, 52.6 years). At 1 year, all implants remained osseointegrated, with overall mean marginal bone changes of -0.01 mm and -0.14 mm for the test and control groups, respectively. Mean facial gingival level change was significantly more pronounced in the control group (-0.70 mm) than in the test group (-0.25 mm). The modified Plaque Index scores showed that patients were able to maintain a good level of hygiene throughout the study. At 1 year, the Papilla Index indicated that more than 50% papilla fill was observed in 75% of the test sites and 80% of the control sites. CONCLUSIONS: Within the limitations of this study, SCTG was shown to be beneficial in maintaining facial gingival level when performed in conjunction with IIPP procedures.

Vertical ridge augmentation with titanium-reinforced, dense-PTFE membranes and a combination of particulated autogenous bone and anorganic bovine bone-derived mineral: a prospective case series in 19 patients.

PURPOSE: This prospective case series evaluated the use of a new titanium-reinforced nonresorbable membrane (high-density polytetrafluoroethylene), in combination with a mixture of anorganic bovine bone-derived mineral (ABBM) and autogenous particulated bone, for vertical augmentation of deficient alveolar ridges. MATERIALS AND METHODS: A mixture of ABBM and autogenous particulated bone was used for vertical ridge augmentation and covered with a new titanium-reinforced nonresorbable membrane. Ridge measurements were obtained before and after the procedure, complications were recorded, and biopsy specimens were taken for histologic examination. RESULTS: Twenty vertical ridge augmentation procedures were carried out in 19 patients. All treated defect sites exhibited excellent bone formation, with an average bone gain of 5.45 mm (standard deviation 1.93 mm). The healing period was uneventful, and no complications were observed. Eight specimens were examined histologically; on average, autogenous or regenerated bone represented 36.6% of the specimens, ABBM 16.6%, and marrow space 46.8%. No inflammatory responses or foreign-body reactions were noted in the specimens. CONCLUSION: The treatment of vertically deficient alveolar ridges with guided bone regeneration using a mixture of autogenous bone and ABBM and a new titanium-reinforced nonresorbable membrane can be considered successful.

Horizontal guided bone regeneration in the posterior maxilla using recombinant human platelet-derived growth factor: a case report.

This clinical case report describes and demonstrates the successful use of purified recombinant human platelet-derived growth factor in conjunction with autogenous bone, an organic bovine bone-derived mineral, and a barrier membrane to reconstruct severe alveolar bone defects. Significant horizontal bone regeneration was achieved in the posterior maxillary region. Three implants were placed into the newly formed ridge and demonstrated stable crestal bone after 36 months of loading.

Horizontal ridge augmentation with a collagen membrane and a combination of particulated autogenous bone and anorganic bovine bone-derived mineral: a prospective case series in 25 patients.

This prospective case series evaluated the use of a resorbable natural collagen membrane with a mixture of autogenous bone and anorganic bovine bone-derived mineral (ABBM) for lateral ridge augmentation and subsequent implant placement. A mixture (1:1) of particulated autogenous bone and ABBM was used for lateral ridge augmentation and covered with a resorbable, natural collagen bilayer membrane to treat knife-edge ridges and prepare them for implant placement. Ridge measurements were obtained pre- and postsurgery, complications recorded, and biopsy specimens examined histologically. Seventy-six implants were placed in 25 patients with 31 knife-edge ridge surgical sites. One defect had a bone graft complication (3.2%; exact 95% confidence interval: 0.1%, 16.7%). Clinical measurements revealed an average of 5.68 mm (standard deviation [SD] = 1.42 mm) of lateral ridge augmentation after a mean 8.9-month (SD = 2.1 months) graft healing period. Clinically, all treated ridges were sufficient in width for subsequent implant placement. All implants survived with an average follow-up of 20.88 months (SD = 9.49 months). Histologic analysis of nine surgical sites showed that ABBM was connected with a dense network of newly formed bone with varying degrees of maturation. Histomorphometric analysis demonstrated that autogenous bone represented a mean of 31.0% of the specimens, ABBM 25.8%, and marrow space 43.2%. The treatment of horizontally deficient alveolar ridges with the guided bone regeneration technique using autogenous bone mixed with ABBM and a natural collagen resorbable barrier membrane can be regarded as successful. Implant success and survival need to be confirmed with long-term follow-up examinations.

The incidence of maxillary sinus membrane perforation during endoscopically assessed crestal sinus floor elevation: a pilot study.

Transcrestal sinus membrane elevation is a surgical procedure performed to increase the bone volume in the maxillary sinus cavity. Because of visual limitations, the potential for maxillary sinus membrane perforations may be greater than with the lateral approach technique. The aim of this study was to macroscopically investigate ex vivo the occurrence of sinus membrane perforation during surgery using 3 transcrestal sinus floor elevation methods. Twenty fresh human cadaver heads, with 40 intact sinuses, were used for simultaneous sinus membrane elevation, placement of graft material, and dental implants. Real-time sinus endoscopy, periapical digital radiographs, and cone-beam computerized tomography (CBCT) images were subsequently used to evaluate the outcome of each surgical procedure. Perforation rates for each of the 3 techniques were then compared using a significance level of P < .05. No statistically significant differences in the perforation rate (P = .79) were found among the 3 surgical techniques. Although the sinus endoscope noted a higher frequency of perforations at the time of implant placement as compared with instrumentation or graft insertion, the difference was not statistically significant (P = .04). The CBCT readings were judged to be more accurate for identifying evidence of sinus perforations than the periapical radiographs when compared with the direct visualization with the endoscope. This pilot study demonstrated that a sinus membrane perforation can occur at any time during the sinus lift procedure, independent of the surgical method used.

Horizontal ridge augmentation with a resorbable membrane and particulated autogenous bone with or without anorganic bovine bone-derived mineral: a prospective case series in 22 patients.

PURPOSE: This prospective case series evaluated the use of a new synthetic resorbable membrane with autogenous bone, either alone or in combination with anorganic bovine bone-derived mineral, for horizontal ridge augmentation and subsequent implant placement. MATERIALS AND METHODS: Particulated autogenous bone, either alone or in combination with anorganic bovine bone-derived mineral, was used for lateral ridge augmentation and covered with a new synthetic resorbable membrane (glycolide and trimethylene carbonate) to treat knife-edged ridges and prepare them for implant placement. Ridge measurements were obtained before and after augmentation, complications were recorded, and biopsy specimens were examined histologically. RESULTS: Fifty-eight implants were placed in 22 patients with 25 surgical sites in knife-edged ridges. No complications were associated with this treatment. Clinical measurements revealed an average of 5.56 mm (± 1.45 mm) of lateral ridge augmentation after an average of 8.12 months (± 2.32 months) of graft healing. Clinically, all treated ridges were sufficient in width for subsequent implant placement. All implants have survived, with an average follow-up period of 45.88 months (± 12.43 months). Histologic analysis of the selected augmentation sites showed new bone formation and good incorporation of the bovine bone mineral particles. CONCLUSION: The high implant survival rate and the low complication rate show the potential of this technique for the treatment of horizontal augmentation of lateral ridges and the efficacy of the new resorbable synthetic membrane.

Peri-implant tissue response following connective tissue and bone grafting in conjunction with immediate single-tooth replacement in the esthetic zone: a case series.

PURPOSE: This case series evaluated the peri-implant tissue response following extraction and immediate placement and restoration of an implant in conjunction with subepithelial connective tissue grafting (SCTG) and bone grafting in the esthetic zone. Implant success rates and the peri-implant tissue response were also reported. METHODS AND MATERIALS: Ten patients (four men, six women) with a mean age of 48 years (range, 35 to 70) underwent extraction and immediate tooth replacement with SCTG and were evaluated clinically and radiographically presurgically (T0), immediately after immediate tooth replacement and SCTG (T1), and at 3 months (T2), 6 months (T3), and 12 months (T4) after surgery. Data was analyzed using Friedman and Wilcoxon signed-ranks tests at the significance level of a = .05. RESULTS: At 1 year, all implants remained osseointegrated, with an overall mean marginal bone change of +0.10 mm and a mean facial gingival level change of -0.05 mm. Modified Plaque Index scores showed that patients were able to maintain a good level of hygiene throughout the study. Papilla Index scores indicated that at T4, more than 50% papilla fill was observed in 80% of all sites. CONCLUSIONS: The results of this case series suggest that, in addition to a favorable implant success rate and peri-implant tissue response, the facial gingival level around single immediately placed implants can also be maintained following connective tissue grafting when proper three-dimensional implant positioning is achieved and bone is grafted into the implant-socket gap.

Immediate single tooth replacement with subepithelial connective tissue graft using platform switching implants: a case series.

This case series evaluated the facial gingival stability following single immediate tooth replacement in conjunction with subepithelial connective tissue graft (SCTG). Implant success rate and peri-implant tissue response were also reported. Ten patients (6 male, 4 female), with a mean age of 52.1 (range = 22.7 to 67.1) years, underwent immediate implant placement and provisionalization with SCTG and were evaluated clinically and radiographically at presurgery (T0), at the time of immediate tooth replacement and SCTG (T1), and 3 months (T2), 6 months (T3), and 12 months (T4) after surgery. Data were analyzed using the Friedman and Wilcoxon signed-ranks tests at the significance level of α = .05. At 1 year, 9 of 10 implants remained osseointegrated with the overall mean marginal bone change of -0.31 mm and a mean facial gingival level change of -0.05 mm. The modified plaque index scores showed that patients were able to maintain a good level of hygiene throughout the study. The papilla index score indicated that at T4, more than 50% of the papilla fill was observed in 89% of all sites. When proper 3-dimensional implant position is achieved and bone graft is placed into the implant-socket gap, favorable success rate and peri-implant tissue response of platform switching implants can be achieved following immediate tooth replacement in conjunction with subepithelial connective tissue graft.

The effects of resorbable membrane on human maxillary sinus graft: a pilot study.

PURPOSE: To investigate the effects of resorbable membrane on new bone formation in human maxillary sinus graft using anorganic bovine bone material histomorphometrically in a split-mouth study design. MATERIALS AND METHODS: This prospective pilot study included six patients who required bilateral sinus augmentations prior to implant treatment. Each patient was grafted with anorganic bovine bone (Bio-Oss). The experimental side was covered with resorbable membrane (Bio-Gide) over the grafted sinus, and the control side was left uncovered. After 8 months of healing (range, 7 to 9 months), implants were placed. Biopsy samples were obtained from each side through the previously grafted sinus window and evaluated. Statistical analysis was performed using the Mann-Whitney U test at a significance level of alpha = .05. RESULTS: The control side appeared to have a significantly greater amount of soft tissue than the experimental side (P = .026), whereas no significant differences in the amount of new bone were observed (P = .937). CONCLUSION: Resorbable membranes significantly reduced the amount of soft tissue formed in the sinus grafted with anorganic bovine bone material but had no effect on new bone formation.

Misfit of implant fixed complete denture following computer-guided surgery.

Recently, computer technology has made it possible to simulate implant placement, fabricate a precise surgical template based on the simulated implant locations, and fabricate a prosthesis prior to surgical placement of implants. Many successful patient treatments have been reported using this process, but little has been published regarding complications. This article reports on the misfit of an immediately loaded definitive fixed complete denture that had been fabricated prior to implant surgery. The prosthesis was designed and fabricated using computerized implant data. A surgical template was fabricated (Nobel Guide) from the computer data to guide implant placement using an "All-on-Four" design concept. Management of the prosthesis misfit is discussed along with subsequent clinical complications.

Effects of the facial osseous defect morphology on gingival dynamics after immediate tooth replacement and guided bone regeneration: 1-year results.

PURPOSE: This article describes different scenarios of facial osseous defects when the osseous-gingival relationship exceeds 3 mm and evaluates the effects of the morphology of the compromised facial bone on gingival dynamics after immediate tooth replacement and guided bone regeneration. The implant success rate and peri-implant bone change were also reported. MATERIALS AND METHODS: Twenty-three patients treated consecutively with the mean age of 39.5 years (range, 25 to 63 years) underwent immediate tooth replacement and guided bone regeneration in sockets with facial bony defects exceeding 3 mm. Facial bony defects were categorized into V-, U-, and Ultra-U (UU)-shaped. The patients were evaluated clinically and radiographically at 1-year after implant placement. RESULTS: At 1-year, the implant success rate was 100% (23/23). No marginal bone change of greater than 1 mm was observed. Greater than 1.5 mm of facial gingival recessions were noted in 8.3% (1/12) of V-shaped, 42.8% (3/7) of U-shaped, and 100% (4/4) of UU-shaped defects. CONCLUSIONS: U- and UU-shaped defects showed significantly higher frequency and magnitude of facial gingival recession (>1.5 mm) when compared with V-shaped defects 1-year after immediate tooth replacement and guided bone regeneration. It is important to identify the type of facial bony defect during diagnosis and treatment planning, so that appropriate treatment can be prescribed. The combination of delayed implant placement after staged reconstruction of unfavorable U- and UU-shaped labial extraction socket defects should be considered in areas of high esthetic concern.

Computer-guided immediate provisionalization of anterior multiple adjacent implants: surgical and prosthodontic rationale.

Immediate implant restoration has gained popularity in recent years due in part to technological advancements that use computed tomographic images to simulate the actual clinical situation. This computer-assisted simulation enables clinicians to develop a comprehensive treatment plan that can be precisely executed in a timely manner. In the aesthetic zone, however, a successful outcome requires more than merely accurate implant placement. This article discusses the significance of site development for aesthetic implant restoration and describes a computer-guided immediate pro visionalization procedure and its surgical and prosthodontic rationale

Immediate functional load of mandibular implant overdentures: a surgical and prosthodontic rationale of 2 implant modalities.

Classic guidelines in osseointegration for root-form dental implants include a long healing period, during which functional load should be avoided. However, the long healing period might impose an intolerable situation on some patients, especially in the completely edentulous situation. Subperiosteal dental implant guidelines demonstrate that the implant upon insertion can be put into immediate function and be restored with the final prosthesis soon after surgery. Studies on immediately functional loaded implant-supported prostheses in patients who are completely edentulous have been reported, exhibiting high success rates comparable with conventionally loaded implants. This article describes the surgical and prosthodontic procedure for the immediately functional loaded mandibular implant overdentures in 2 different dentalimplant modalities, as well as its clinical rationale.

Factors affecting the survival of implants placed in grafted maxillary sinuses: a clinical report.

Many factors affect the survival rate of osseointegrated implants placed in grafted maxillary sinuses. This clinical report describes the retrospective evaluation of 60 patients with 228 implants placed in 84 grafted maxillary sinuses at the Loma Linda University School of Dentistry. The factors used to determine the survival rates of these implants were implant type, simultaneous/delayed implant placement, pretreatment bone height, oral hygiene, and cigarette smoking habits. Out of the total 228 implants, 205 (89.9%) remained in function after a mean follow-up period of 41.6 months (range 0 to 60 months). A higher failure rate was associated with the use of non-threaded implants, poor oral hygiene, and smoking. This information may facilitate treatment planning and enhance communication between the dentist and patient regarding the risk/benefit ratio and outcomes of implants placed in grafted maxillary sinuses.