Durable Nano-Flower Structured Foam Coupled with Electrically-Driven in Situ Aeration Enable High-Flux Oil/Water Emulsion Separation with Dynamic Antifouling Ability.

The conventional membranes used for separating oil/water emulsions are typically limited by the properties of the membrane materials and the impact of membrane fouling, making continuous long-term usage unachievable. In this study, a filtering electrode with synchronous self-cleaning functionality is devised, exhibiting notable antifouling ability and an extended operational lifespan, suitable for the continuous separation of oil/water emulsions. Compared with the original Ti foam, the in situ growth of NiTi-LDH (Layered double hydroxide) nano-flowers endows the modified Ti foam (NiTi-LDH/TF) with exceptional superhydrophilicity and underwater superoleophobicity. Driven by gravity, a rejection rate of over 99% is achieved for various emulsions containing oil content ranging from 1% to 50%, as well as oil/seawater emulsions. The flux recovery rate exceeds 90% after one hundred cycles and a 4-h filtration period. The enhanced separation performance is realized through the "gas bridge" effect during in situ aeration and electrochemical anodic oxidation. The internal aeration within the membrane pores contributes to the removal of oil foulants. This study underscores the potential of coupling foam metal filtration materials with electrochemical technology, providing a paradigm for the exploration of novel oil/water separation membranes.

An efficient solution based on the synergistic effects of nickel foam in NiFe-LDH nanosheets for oil/water separation.

Efficient oil-water separation has always been a research hotspot in the field of environmental studies. Employing a one-step hydrothermal approach, NiFe-layered double hydroxides (LDH) nanosheets were synthesized on nickel foam substrates. The resulting NiFe-LDH/NF membrane exhibited rejection rates exceeding 99% across six diverse oil-water mixtures, concurrently demonstrating a remarkable ultra-high flux of 1.4 × 106 L·m-2·h-1. This flux value significantly surpasses those documented in existing literature, maintaining stable performance over 1000 manual filtration cycles. These breakthroughs stem from the synergistic interplay among the three-dimensional channels of the nickel foam, the nanosheets, and the hydration layer. By leveraging the pore size of the foam to enhance the functionality of the hydration layer, the conventional trade-off between permeability and selectivity was transformed into a balanced force relationship between the hydration layer and the oil phase. The operational and failure mechanisms of the hydration layer were examined using the prepared NiFe-LDH/NF membrane, validating the correlation between oil phase viscosity and density with hydration layer rupture. Additionally, an extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory was employed to investigate changes in interaction energy, further reinforcing the study's findings. This research contributes novel insights and assistance to the comprehension and application of hydration layers in other membrane studies dedicated to oil-water separation.

Combined effect of iron and zinc on micronutrient levels in wheat (Triticum aestivum L.).

A nutrient solution experiment was conducted to investigate the effect of Fe and Zn supply on Fe, Zn, Cu, and Mn concentrations in wheat plants. The experiment used a factorial combination of two Fe levels (0 and 5 mg l(-1)) and three Zn levels (0, 0.1 and 10 mg I(-1)). The supply of Fe (5 mg l(-1)) and Zn (0.1 mg l(-1)) increased plant dry weight and leaf chlorophyll content compared to the Fe or Zn deficient (0 mg 11) treatments. However, excess Zn supply (10 mg l(-1)) reduced plant dry weights and leaf chlorophyll content. Iron supply (5 mg l(-1)) reduced wheat Zn concentrations by 49%, Cu concentrations by 34%, and Mn by 56% respectively. Zinc supply (10 mg l(-1)) reduced wheat Fe concentrations by an average of 8%, but had no significant effect on Cu and Mn concentrations. Stepwise regression analyses indicated that Zn, Cu, and Mn concentrations were negatively correlated with root- and leaf-Fe concentrations, but positively correlated with stem-Fe concentrations. Leaf-Mn concentrations were negatively correlated with root-, stem- and leaf-Zn concentrations.