Radial head replacement with the 3D-printed patient-specific titanium prosthesis: Preliminary results of a multi-centric prospective study.

PURPOSE: To report preliminary clinical results and safety of 3D-printed patient-specific titanium radial head (RH) prosthesis in treatment of the irreparable RH fractures. MATERIAL AND METHODS: This multi-centric prospective study included 10 patients (6 men and four women, mean age 41 years (range, 25-64 years)). Three cases were classified as Mason type III and 7 cases as type IV. Patients were assessed preoperatively, intraoperatively, and at 1, 6, 12, 24, 36, and 48 weeks postoperatively. Range of motion (ROM), visual analog scale (VAS) score, Disabilities of the Arm, Shoulder and Hand (DASH) score, Mayo Elbow Performance Score (MEPS), radiology imaging, and laboratory blood and urine testing were evaluated. RESULTS: The prostheses were implanted utilizing cemented stems in 5 patients and cementless stems in 5 patients. Intraoperatively, well congruency of a prosthesis with capitellum and radial notch of ulna was observed in all cases. All patients had improvement of ROM, VAS score, DASH score, and MEPS during the postoperative follow-ups. At the final follow-up, mean elbow extension was 6.5° (range, 0°-30°), flexion 145° (range, 125°-150°), supination 79° (range, 70°-80°), and pronation 73.5° (range, 45°-80°). Mean VAS score was 0.3 (range, 0-3), DASH score was 12.35 (range, 1.7-23.3), and MEPS was 99.5 (range, 95-100). Postoperative radiographs demonstrated heterotopic ossification in 2 cases, periprosthetic radiolucency in 2 cases, and proximal radial neck resorption in 2 cases. No one had the evidence of capitellar erosion, implant failure, malpositioning, overstuffing, or symptomatic stem loosening. There was no significant alteration of laboratory results or adverse events related to the 3D-printed prosthesis implantation. CONCLUSION: The preliminary results demonstrated that implantation of the 3D-printed patient-specific titanium RH prosthesis is safe and may be a potential treatment option for irreparable RH fracture.

Triple suture fixation for displaced comminuted olecranon fracture with a stable ulnohumeral joint.

PURPOSE: To report the outcome of a novel fixation technique using three high-strength sutures which is including articular buttress suture, cerclage suture, and tension band with off-loading triceps suture (triple suture fixation) in the treatment of displaced comminuted olecranon fracture with a stable ulnohumeral joint (Mayo type IIB). The rationale of using this technique is that the sutures have been used to stabilize multiple fracture fragments in all sides of the olecranon. MATERIAL AND METHODS: Between July 2018 and July 2021, 10 patients (7 women, 3 men; mean age, 49.9 years; mean follow-up duration, 27.8 months) with Mayo type IIB olecranon fractures who underwent triple suture fixation were included in the study. The elbow was immobilized in a splint for 2 weeks postoperatively. Range-of-motion exercises were initiated after splint removal and weight bearing was allowed at 6 weeks postoperatively. RESULTS: Average active range of motion of the elbow was 145° of flexion (range, 135°-150°), 6.5° of extension (range, 0°-30°), 83° of supination (range, 70°-85°), and 77.5° of pronation (range, 70°-80°). Mean MEPS was 98.3 (range, 85-100) and DASH score was 3.1 (range, 0-10) at the final follow-up. Radiographic data at the final follow-up analyzed by paired t test demonstrated that there was no statistically significant difference of proximal olecranon height (OH), trochlear notch width (TW), and OH/TW ratio between postoperative treatment and normal side (p-value >.05). No complication of implant prominence, fixation failure, nonunion, infection or heterotopic ossification was found postoperatively. Breakage of drill bit occurred during drilling a distal oblique hole for articular buttress suture in one patient. CONCLUSION: The triple suture fixation is an effective treatment with low incidence of complications in treatment of Mayo type IIB olecranon fractures. Larger comparative studies are needed to confirm the value of such technique.

What Are the MSTS Scores and Complications Associated With the Use of Three-dimensional Printed, Custom-made Prostheses in Patients Who Had Resection of Tumors of the Hand and Foot?

BACKGROUND: There are a few good options for restoring bone defects in the hand and foot. 3D-printed implants have been used in the pelvis and elsewhere, but to our knowledge, they have not been evaluated in the hand and foot. The functional outcome, complications, and longevity of 3D-printed prostheses in small bones are not well known. QUESTIONS/PURPOSES: (1) What are the functional outcomes of patients with hand or foot tumors who were treated with tumor resection and reconstruction with a 3D-printed custom prosthesis? (2) What complications are associated with using these prostheses? (3) What is the 5-year Kaplan-Meier cumulative incidence of implant breakage and reoperation? METHODS: Between January 2017 and October 2020, we treated 276 patients who had tumors of the hands or feet. Of those, we considered as potentially eligible patients who might have extensive loss in their joint that could not be fixed with a bone graft, cement, or any prostheses available on the market. Based on this, 93 patients were eligible; a further 77 were excluded because they received nonoperative treatment such as chemoradiation, resection without reconstruction, reconstruction using other materials, or ray amputation; another three were lost before the minimum study follow-up of 2 years and two had incomplete datasets, leaving 11 for analysis in this retrospective study. There were seven women and four men. The median age was 29 years (range 11 to 71 years). There were five hand tumors and six tumors of the feet. Tumor types were giant cell tumor of bone (five), chondroblastoma (two), osteosarcoma (two), neuroendocrine tumor (one), and squamous cell carcinoma (one). Margin status after resection was ≥ 1 mm. All patients were followed for a minimum of 24 months. The median follow-up time was 47 months (range 25 to 67 months). Clinical data; function according to the Musculoskeletal Tumor Society, DASH, and American Orthopedic Foot and Ankle Society scores; complications; and survivorship of implants were recorded during follow-up in the clinic, or patients with complete charts and recorded data were interviewed on the telephone by our research associates, orthopaedic oncology fellows, or the surgeons who performed the surgery. The cumulative incidence of implant breakage and reoperation was assessed using a Kaplan-Meier analysis. RESULTS: The median Musculoskeletal Tumor Society score was 28 of 30 (range 21 to 30). Seven of 11 patients experienced postoperative complications, primarily including hyperextension deformity and joint stiffness (three patients), joint subluxation (two), aseptic loosening (one), broken stem (one), and broken plate (one), but no infection or local recurrence occurred. Subluxations of the metacarpophalangeal and proximal interphalangeal joints in two patients' hands were caused by the design of the prosthesis without a joint or stem. These prostheses were revised to a second-generation prosthesis with joint and stem, leading to improved dexterity. The cumulative incidence of implant breakage and reoperation in the Kaplan-Meier analysis was 35% (95% CI 6% to 69%) and 29% (95% CI 3% to 66%) at 5 years, respectively. CONCLUSION: These preliminary findings suggest that 3D implants may be an option for reconstruction after resections that leave large bone and joint defects in the hand and foot. Although the functional results generally appeared to be good to excellent, complications and reoperations were frequent; thus, we believe this approach could be considered when patients have few or no alternatives other than amputation. Future studies will need to compare this approach to bone grafting or bone cementation. LEVEL OF EVIDENCE: Level IV, therapeutic study.

Anthropometric Study of Proximal Radius in Below-Average Height Thai Women and Its Correlation with Commercially Available Radial Head Prostheses.

Background: Most radial head prostheses were designed in Western countries based on the anatomical characteristics of Western populations. We hypothesised that these prostheses are too large for below-average height Thai women. The objective of this study is to evaluate the anthropometric parameters of the proximal radius in such a population and its correlation with commercially available prostheses. Methods: Dominant elbows of 124 Thai women whose height was <155 cm were studied. Using the standard anteroposterior and lateral radiographic images, the head diameter and thickness, the distance between the articular surface and radial tuberosity, the narrowest intra-medullary canal diameter and the narrowest outer diameter of the radial neck were measured. Correlations between body height and each radiographic parameter were assessed using the Pearson correlation coefficient (PCC). The specifications of the commercial metallic radial head implants were reviewed and used to evaluate the relevant radiographic parameters. Results: Mean of the minimum and maximum head diameter was 18.54 ± 1.11 mm and 19.13 ± 1.17 mm, respectively; the thickness was 7.43 ± 0.69 mm, the distance between the articular surface and tuberosity was 19.05 ± 1.45 mm, the intra-medullary canal diameter was 7.63 ± 1.2 mm and the outer diameter of the radial neck was 11.13 ± 1.26 mm. There is a poor correlation between the participant's height and each parameter (PCC ≤ 0.50). In 24.2% of the participants, the smallest size of prosthetic designs with a head diameter of 20 mm is larger than +2 mm in reference to minor diameter. The minimum prosthetic head thickness is greater than the average value of the participants in 12 out of 15 designs. One participant has an outer neck diameter smaller than the smallest stem diameter of three designs. Conclusions: Surgeons must be aware that commercially available radial head replacement implants may be too large for below-average height Thai women. Level of Evidence: Level IV (Prognostic).

The patient-specific implant created with 3D printing technology in treatment of a severe open distal humerus fracture with complete loss of the lateral column.

The open distal humeral fracture associated with the major loss of the articular surface and bony structure is a challenging problem for orthopedic surgeons. In this case report, we describe a case of complete missing lateral column of the distal humerus with severe articular destruction of capitellum and lateral trochlear ridge which was treated with the patient-specific implant created with three-dimensional printing technology. Apart from anatomic replacement of the articular surface, the lateral collateral ligament complex and extensor muscle which are the key soft tissue stabilizers of elbow were repaired by reattaching their bony origins to the impacted iliac crest bone graft inside the implant. Due to the favorable result at 2-year follow-up, this modality is a potentially viable surgical option in treating of the severe open distal humeral fracture associated with entire lateral condylar damage.

A biomechanical comparison of different tying techniques of a double-stranded looped suture.

PURPOSE: This study aims to assess the biomechanical performance of different tying techniques of a double-stranded looped suture (DSLS). METHODS: Loop and knot security of DSLS tying techniques (nice knot (NK), modified nice knot (MNK), double-twist knot (DTK), and double-barrel knot (DBK)) were compared. The square knot of DSLS (SKD) and the square knot of single-stranded suture (SKS) had been used as references. Twenty-four loops of each configuration were created using No. 2 Fiberwire (Arthrex, Naples, Florida, USA) and tested with a material testing machine. Samples were loaded with 10 N preloads for loop security assessment. Knot security was subsequently evaluated. Twelve loops of each knot were loaded to failure. The rest were subjected to cyclic load testing and the elongation at the 50th and 1000th cycles were measured. Knot bulkiness was determined by measuring knot height before testing. Data were compared with analysis of variance and post hoc tests. Statistical significance was p < 0.05. RESULTS: All knots showed no statistically significant difference in displacement with preload. The load-to-failure was highest in NK, followed by MNK, DTK, DBK, SKD, and SKS. The cyclic loading test at the 50th cycle and the 1000th cycle demonstrated that NK has significantly less displacement than the others except MNK. DTK provided a minimal average knot height followed by NK, SKS, DBK, MNK, and SKD. CONCLUSION: The different tying techniques in DSLS provided the similar loop security but different knot security and knot bulkiness. NK and MNK are biomechanically superior to the other knots, whereas DTK is the least bulky. The findings in the present study may help set the guide for the surgeons to select the tying technique of DSLS to best suit their requirement.

Matching precision of the reverse contralateral radial head in generating of the individualized prosthesis from the surface registration in tuberosity-neck and in tuberosity-diaphysis.

PURPOSE: Following the radial head replacement, the surface mismatches between the implants and the morphological characteristics of the original proximal radius decreased contact areas and increased contact forces which is potential for the long-term articulating cartilage wear. Several studies demonstrated that the individualized prosthesis, created from computed tomographic (CT) images of the contralateral side with the reverse engineering technology, may reduce the mismatch. The aim of this study is to demonstrate the matching precision of the reverse contralateral head between the surface registration in tuberosity-neck (TN) area and in tuberosity-diaphysis (TD) area. MATERIALS AND METHODS: High-resolution CT scan of 11 pairs of the cadaveric arms was performed. Utilizing advanced image processing techniques, three-dimensional (3-D) models of each specimen was generated. The model of the left side was reversed and matched with the model of the right side in the same cadaver by registering in the area of radial neck along with tuberosity (TN) and in the area of radial tuberosity combined with 2 cm of proximal diaphysis (TD). The alteration of the head diameter, dish diameter, articular depth, head thickness, end-plane angle, offset, and head volume were evaluated and analyzed by paired t-test. RESULTS: No statistically significant difference was found in all parameters from both TN and TD registrations ( p < 0.05). CONCLUSION: The surface registration in either TN or TD area can generate the statistically symmetrical 3-D model with the original head. The registration in these areas may possibly be used in creating the individualized radial head prosthesis.

Different Dosages of Triamcinolone Acetonide Injection for the Treatment of Trigger Finger and Thumb: A Randomized Controlled Trial.

BACKGROUND: This study was designed to compare the efficacy and complications between 3 different dosages of triamcinolone acetonide for the treatment of trigger finger. METHODS: Ninety-three patients with a total of 120 trigger digits were included in the study. The involved digits were randomized to 3 groups. Each group received treatment consisting of injection with 5, 10 or 20 mg triamcinolone acetonide. The clinical response to the steroid was evaluated during the first six weeks after injection. The success rate was determined at 3, 6, 9 and 12 months after injection. RESULTS: After the injections, pain and triggering improved gradually and nearly resolved completely at 6 weeks in all dosages. A dose related pattern was found at 3 and 6 months after the injection. The 20 mg group had a significant higher success rate when compared to the 5 and 10 mg at 3 and 6 months. The 10 mg group has significant higher success rate when compare to 5 mg at 3 months. There were no differences of success rate between groups at 9 and 12 months. At 12 months, 7 of 40 digits (17.5%) in the 5 mg group, 7 of 40 digits (17.5%) in the 10 mg group, and 9 of 40 digit (22.5%) in the 20 mg group were without triggering (p = 0.806). CONCLUSIONS: A dose-response characteristic was demonstrated in the treatment of trigger finger with triamcinolone acetonide. Triamcinolone acetonide 5 mg seems to have the lowest success rate.

Midterm outcome of partial radial head replacement with a contoured iliac crest bone graft in complex elbow dislocation.

PURPOSE: To report the midterm outcome of a novel reconstructive technique using a contoured iliac crest bone graft for partial radial head replacement in the treatment of complex elbow dislocation. MATERIAL AND METHODS: Between January 2008 and December 2013, 10 patients (5 women, 5 men; mean age, 43.8 years; mean follow-up duration, 65.9 months) with complex elbow dislocation who underwent the partial radial head replacement with the contoured bone graft were included in the study. The irreparable radial head defects averaged 49% of the articular surface (range, 36-60%). The fracture involved the entire head in four patients and partial head in six patients. RESULTS: At the final follow-up, the mean elbow extension was 8°, flexion 143°, supination 76.5°, and pronation 73°. The mean Mayo elbow performance index was 93.2 points and the Broberg-Morrey functional rating score was 94.1 points, with seven excellent cases, two good cases, and one fair case. Radiographic union was achieved in all but one, at an average time of 6.89 weeks (range, 6-10 weeks). The final radiographs demonstrated no evidence of degenerative change in eight patients, mild arthritis in one patient, and moderate arthritis in one patient. CONCLUSION: This technique is a viable option in the treatment of the large radial head defect in complex elbow dislocation when more than 40% of the original head is still available for incorporation.

A Patient-Matched Entire First Metacarpal Prosthesis in Treatment of Giant Cell Tumor of Bone.

Giant cell tumor of the bones occurring in the first metacarpals frequently requires entire metacarpal resection due to the aggressive nature and high rate of recurrence. Bone reconstruction can be performed with autogenous bone grafts. Here we describe a new technique of reconstruction using a patient-matched three-dimensional printed titanium first metacarpal prosthesis. This prosthesis has a special design for ligament reconstruction in the proximal and distal portions. Good hand function and aesthetic appearance were maintained at a 24-month follow-up visit. This reconstructive technique can avoid donor-site complications and spare the autogenous bone grafts for revision options.

Tarsal tunnel syndrome associated with a perforating branch from posterior tibial artery: a case report.

Tarsal tunnel syndrome, a compressive neuropathy of the tibial nerve or its branches with in the tarsal tunnel, is an uncommon condition. Various etiologies of the syndrome have been described. We report a rare case of tarsal tunnel syndrome associated with a perforating branch from the posterior tibial artery. A 56-year-old woman presented with 1-year history of paresthesia and hypoesthesia in the medial and lateral plantar area of the left foot. Tinel's sign was elicited at the tarsal tunnel. Electrodiagnostic studies confirmed the diagnosis of left tarsal tunnel syndrome. Intraoperatively, the perforating branch from posterior tibial artery which traveled through a split in the tibial nerve was encountered. The patient's symptom improved significantly at 2 years after tarsal tunnel release and vascular ligation. Only a minor degree of paresthesia remains in the forefoot.

Immediate cementless hemiarthroplasty for severe destructive glenohumeral tuberculous arthritis.

The glenohumeral joint tuberculosis (TB) is rare as compared with other joints. Plaster immobilization, arthrodesis, and resection arthroplasty have been proposed as the additional treatments with anti-TB medications in severe destructive arthritis. To our knowledge, however, the surgical treatment with shoulder arthroplasty has never been reported. We present two cases of active TB with unsalvageable glenohumeral joint. The cementless hemishoulder arthroplasties were performed immediately following the radical debridement. Anti-TB medications were given for 12 months after the surgery. Postoperatively, the patients were satisfied with the rapid symptomatic relief and significant functional recovery. With the follow-up period of 5 years, the operative results were still satisfactory and the reactivation of the infection was not detected.

Massive rotator cuff tear associated with acute traumatic posterior shoulder dislocation: report of two cases and literature review.

A massive rotator cuff tear in association with acute traumatic posterior glenohumeral dislocation is rare. To our knowledge, only four documented cases have been reported in the literature. We present two additional cases of such injury secondary to the traffic accident. The first patient had an unsuccessful closed reduction due to the posterior instability while the second developed the profound shoulder weakness following the reduction. From the findings of our cases together with the previous reports, every patient had a unique injury mechanism of high-energy directed axial loading on an outstretched, adducted, and internally rotated arm. The glenohumeral capsule and rotator cuff were uniformly avulsed from the humeral attachment, and the supraspinatus and infraspinatus were always involved. However, the clinical presentations were variable based on the severity of the associated rotator cuff tear. The outcomes of operative treatment in this type of injury with the open repair were favorable.

Alteration of the end-plane angle in press-fit cylindrical stem radial head prosthesis: an in vitro study.

PURPOSE: Many studies comparing the morphology of native radial head with the prosthesis have been published. However, there is limited information regarding the postoperative alignment of the articular surface following the radial head replacement. The purpose of this study is to evaluate the alteration of the end-plane angle in the modular radial head prosthesis with a press-fit cementless cylindrical stem. METHODS: The study used 36 cadaveric radii. The press-fit size prosthesis with cylindrical stem was inserted into each specimen. The end-plane angles of the radial head before and after prosthetic replacement, were measured in coronal and sagittal planes with a digital inclinometer. The data were analyzed by paired t-test. RESULTS: From paired t-test, there were statistically symmetrical end-plane angles before and after radial head replacement in both coronal and sagittal planes (p-value < 0.01). The mean of radial head end-plane angle alteration in the coronal plane was 3.62° (SD, 2.76°) (range, 0.3°-8.9°). In the sagittal plane, the mean of alteration was 5.85° (SD, 3.56°) degrees (range, 0.3° - 14.2°). CONCLUSION: The modular radial head prosthesis with cylindrical stem is in vitro able to restore the native end-plane angles of radial heads statistically when used in a press-fit fashion.

Acute true trigger wrist following partial extensor carpi radialis brevis tendon rupture.

Triggering in association with movements of the wrist or "true trigger wrist" due to the extensor tendon is rare. There are only few case reports in literature, but none were associated with the acute partial tendon rupture. We present a case of true trigger wrist originating from partial rupture of extensor carpi radialis brevis tendon (ECRB). In contrast to the other reports, the interval between an initial injury and development of triggering was short because the partial tendon rupture was bunching and forming a nodule. The triggering was attributed to the snapping of the nodule under the extensor pollicis longus tendon (EPL).

Triggering of extensor pollicis longus tendon: case report.

Triggering of extensor pollicis longus (EPL) tendon is an uncommon phenomenon with a few reports in the previous literature. Because of its rarity, the recommendations for management are sparse. We report a case of triggering EPL tendon secondary to the tendon nodule in a 42-year-old woman treated with the surgical decompression. The intraoperative findings, surgical technique and outcome of this case are described.

The anatomical variation of the lateral femoral cutaneous nerve in relation to the anterior superior iliac spine and the iliac crest.

The location of lateral femoral cutaneous nerve (LFCN) in relation to the anterior superior iliac spine (ASIS) and the iliac crest was investigated in 96 embalmed cadaveric specimens. Fifty-six nerves (58.3%) passed medial to the ASIS. Twenty-two nerves (22.9%) passed at the ASIS. Eighteen nerves (18.8%) passed lateral to the ASIS. The LFCN is usually located at 2.1 +/- 0.8 to 3.9 +/- 1.0 cm below the crest in the range of 2-5 cm lateral to the ASIS, respectively. When the anterior iliac crest bone graft harvesting is planned, the anatomical variation in this area should be concerned to reduce the risk of LFCN injury.

Symptomatic flexor carpi radialis brevis: case report.

A patient with a flexor carpi radialis brevis (FCRB) is reported. In contrast to all but one previous case, the anomalous FCRB was painful. The FCRB tendon was located in a separate compartment; the tenosynovitis in that compartment was the likely cause of pain. Release of the compartment relieved the symptoms.

Management of post-traumatic malunion of fractures of the distal radius.

Distal radius malunions are a common cause of patient morbidity. This review of the literature surrounding distal radius malunion covers the demographics, pathologic anatomy, and indications for surgery, surgical techniques, and salvage options. Particular emphasis is placed on subject areas that have not been reviewed as extensively in previous articles, including: intra-articular malunion, computer-assisted techniques, bone graft alternatives, and volar fixed-angle plate osteosynthesis.

Measurement of acetabular cup anteversion with the circle theorem.

OBJECTIVE: Malposition of the acetabular cup is the major risk factor of dislocation after total hip arthroplasty. Postoperatively, measuring of acetabular cup anteversion is very difficult. The new method for measuring acetabular cup anteversion on the plain radiograph of the hip with one of the circle theorems in the basic geometry was created. MATERIAL AND METHOD: An all-polyethylene acetabular cup with known angle of radiographic anteversion was mouthed to the pelvic bone. Antero-posterior hip and pelvis radiographs were taken with the cup in randomly 15 different angles of anteversion. These were reviewed by 3 orthopedic residents. All data from 3 observers were collected and examined for the accuracy, inter-observers reliability and intra-observer reliability of this method. Two films (AP radiograph of the hip and the pelvis) method was used for distinguish between anteversion and retroversion. RESULTS: The measurements of radiographic anteversion have the accuracy of plus or minus 2 degrees. The reliability coefficients of inter-observer variation in the first and second measurements for all definitions of anteversion are high. Pair t-test showed no significant different between value of the first and the second measurements for all definitions in all observers. The intra- and inter-observer variations were 3 degrees or less for all definitions. CONCLUSION: The Acetabular cup anteversion measurement using the circle theorem iseasily to perform with high accuracy and consistency for all definitions of cup anteversion.