Oil/water interface behavior of hesperidin methylchalcone and its application in nano-emulsions.

The behavior of hesperidin methylchalcone (HMC) at the oil/water interface was examined through experimental and molecular simulation methods, and a nano-emulsions based on HMC was subsequently fabricated. The findings indicated that HMC spontaneously aggregated at the oil-water interface, leading to a reduction in interfacial tension and an increase in interfacial thickness. Furthermore, its glycoside and benzene ring showed tendencies to interact with water and medium-chain triglyceride, respectively. The HMC addition amount (w), homogenization times (n) and homogenization pressure (p) significantly influenced the formation of the nano-emulsions. The nano-emulsion with an oil-droplet size of 277.26 ± 13.62 nm was obtained at w = 1.0 %, p = 200 bar, and n = 6. When compared to the Tween 20 nano-emulsion, the HMC nano-emulsion demonstrated superior storage stability, antioxidant activity, and lutein bioaccessibility. It could achieve the slow release of HMC. These findings not only broaden the application range of HMC but also contribute to the advancement of functional nano-emulsions.

The physicochemical properties and Pickering emulsifying capacity of acorn starch.

In this work, the granule characteristics, functional properties, in-vitro digestibility, antioxidant capacity, and phenolic composition of acorn starch were investigated and compared to those of potato starch and corn starch, and its Pickering emulsifying ability was also evaluated. The results showed that the acorn starch granules were spherical and oval in shape, with a smaller particle size, and the amylose content and crystallinity degree were similar to those of corn starch. However, the acorn starch was difficult to swell, with poor aqueous solubility, though it had a strong gel strength and setback viscosity. Because acorn starch contained more free and bound polyphenols, its resistant starch content after cooking and ABTS and DPPH radical scavenging activities were significantly higher than those of potato starch and corn starch. Acorn starch also exhibited outstanding particle wettability and could stabilize Pickering emulsions. The assessed emulsion showed an outstanding effect for protecting ß-carotene against ultraviolet irradiation and was positively correlated with the acorn starch addition amount. The obtained results may serve as a reference for the further development of acorn starch.

Formation mechanism of Pickering emulsion gels stabilized by proanthocyanidin particles: Experimental and molecular dynamics studies.

The feasibility of constructing a Pickering emulsion gel with proanthocyanidin particles (PAP) was evaluated in this study, and the related mechanism was revealed by combining instrumental characterization with molecular dynamics simulation. The results showed that PAP was composed of nano/micron spherical particles or their fragments, which had excellent wettability. Suitable PAP addition amount (w, ≥1%) and oil volume fraction (φ, 40-90 %) were beneficial to the formation of stable Pickering emulsion gel. The oil droplet size of gel was inversely proportional to w and φ. The mechanical parameters (gel strength, loss modulus, and storage modulus) were positively correlated with w and φ. Molecular dynamics simulation indicated that the proanthocyanidin molecules in the oil-water system could spontaneously reside and aggregate at the interface, and their interactions with water and oil reduced interfacial tension, which was consistent with the experimental results. This study provides a reference for other polyphenol-based Pickering emulsions.

Effects of pre-emulsified safflower oil with magnetic field modified soy 11S globulin on the gel, rheological, and sensory properties of reduced-animal fat pork batter.

In this work, the differences in macrostructure and microstructure, rheology, and storage stability of pre-emulsified safflower oil (PSO) prepared by natural and magnetic field modified soy 11S globulin were analysised. It was concluded that the PSO with magnetic field modified soy 11S globulin (MPSO) has better emulsifying activity and physical stability. The changes in gel quality, oxidational sensitivity, rheological, and sensory properties of pork batters with different substitute ratios (0%, 25%, 50%, 75%, and 100%) of pork back-fat by MPSO with magnetic field modified soy 11S globulin were studied. Compared to the sample without MPSO, pork batter with MPSO showed higher emulsion stability, apparent viscosity, L⁎ value, springiness, cohesiveness, and expressible moisture, while lower a⁎ value and cooking loss. Moreover, added MPSO could be more uniformly distributed into the meat matrix with smaller holes. With the increase in the replacement proportion of pork back-fat, the hardness, water- and fat-holding capacity, and P21 of pork batter significantly decreased (P < 0.05). As revealed by sensory evaluation and TBARS, using MPSO to substitute for pork back-fat decreased the lipid oxidational sensitivity of pork batter, and without negative effects on the appearance, juiciness and overall acceptability. Overall, it is feasible to apply MPSO as a pork-fat replacer to produce reduced-animal fat pork batter with excellent gel and sensory properties.

[Research Progress of Pleckstrin Homology Like Domain Family A Member 1 in Tumor].

Pleckstrin homology like domain family A member 1(PHLDA1) is also known as T-cell death-associated gene 51 (TDAG51).Studies have demonstrated that the abnormal expression of PHLDA1 is closely associated with the formation,development,and metastasis of tumors.We summarized the latest research advances in the structure and biological properties of PHLDA1,as well as the roles of PHLDA1 in multiple malignanttumors such as breast cancer,cancer,liver gastric cancer,liver cancer,melanoma,and osteosarcoma,aiming to comprehensively reveal the significance of PHLDA1 in the clinical diagnosis of tumors.

Preparation and characterization of a dihydromyricetin-sugar beet pectin covalent polymer.

A dihydromyricetin (DMY)-sugar beet pectin (SBP) covalent polymer was prepared using an alkaline method for the first time, and its structure and physicochemical properties were characterized. The results showed that the molecular weight, total phenol content, and ABTS radical scavenging ability of the polymer were positively correlated with DMY dosage. The polymer inhibited α-glucosidase in a mixed non-competitive and anti-competitive inhibition manner, and its inhibition performance depended on the total phenol content. Its maximum inhibitory activity was much higher than that of DMY, which was attributed to its strong protein binding capacity. The stability and ß-carotene protective effects of the nano-emulsions stabilized with the DMY-SBP polymers were also positively correlated to the total phenol content and were superior to those stabilized by SBP. Therefore, the results obtained in this study may improve our functional understanding of natural polyphenol-polysaccharide polymers and promote the development of new nutraceuticals.

Structuring of sunflower oil by stearic acid derivatives: Experimental and molecular modelling studies.

Structuring of vegetable oils has potential application in food, pharmaceutical and cosmetic products. In this study, structuring effects of stearic acid derivatives on sunflower seed oil were systematically investigated by experimental and molecular simulation methods. Stearic acid (SA), 12-hydroxy stearic acid (HSA) and 2-hydroxyethyl stearate (HES) were able to structure sunflower seed oil, among which the structuring ability of HES was reported for the first time. The oleogel formed with HSA exhibited good mechanical properties (such as hardness, fracturability, adhesiveness, chewiness and storage modulus), which coincided with its highest solid fat content and degree of crystallinity. Oleogels containing SA and HES showed similar mechanical properties. Both the molecular dynamics (MD) simulation and independent gradient model (IGM) confirmed that the HSA dimer possessed the strongest interaction during the self-assembly process while the dimers of HES and SA had similar interactions, which could explain their structuring performance.

Lipase-catalyzed synthesis mechanism of tri-acetylated phloridzin and its antiproliferative activity against HepG2 cancer cells.

Herein, we perform the regioselective acetylation of phloridzin catalyzed by immobilized Candida antarctica lipase B (CALB). We show that the enzyme amount and reaction time can significantly influence the composition of mono-, di- and tri-acetylated phloridzin in the product. The last acetylated derivative of phloridzin is isolated and identified as 4, 3″, 6″-3-O-acetyl-phloridzin by HPLC, UV, IR, MS and NMR. Molecular docking suggests that the first acetylation of phloridzin catalyzed by CALB occurs in 6″-OH, followed by 3″-OH, then 4-OH. During this process, hydrogen bond and hydrophobic forces play an important role in maintaining the binding interaction of CALB with phloridzin or its acetylated derivatives. Although, tri-acetylated phloridzin has moderate to minimal adverse-effects on LO-2, its anti-proliferative activity against human HepG2 cancer cells is superior to that of phloridzin, which attributes to its high capacity of inducing cell apoptosis, retarding cell cycle, lowering mitochondrial membrane potential and scavenging intracellular ROS.

Antioxidant and α-amylase inhibitory activities of tannic acid.

Tannic acid widely exists in plants, which forms a part of human diet. The antioxidant activity of tannic acid was evaluated by the chemical and cellular antioxidant assays. And its α-amylase inhibitory activity and behavior were also investigated. It was found that hydrogen- and electron donating capacities of tannic acid were higher than those of tertiary butylhydroquinone (TBHQ) based on reducing power, ABTS and DPPH radical scavenging assays. But for its low hydrophobic property, the antioxidant activity of tannic acid in linoleic acid system was inferior to that of TBHQ. In the cellular antioxidant assay, tannic acid showed the higher activity than gallic acid in the "PBS wash" protocol, which could attribute to its high binding capacity of cell membrane. Compared with acarbose, tannic acid possessed the stronger α-amylase inhibitory capacity. And the static fluorescence quenching of α-amylase in the presence of tannic acid could be also observed, which was caused by their binding interaction.

A Novel Thin-Film Nanocomposite Nanofiltration Membrane by Incorporating 3D Hyperbranched Polymer Functionalized 2D Graphene Oxide.

In order to develop a high-performance thin-film nanocomposite (TFN) nanofiltration (NF) membrane, the functionalized graphene-based nanomaterial (GO-HBE-COOH) was synthesized by combining two-dimensional graphene oxide (GO) with a three-dimensional hyperbranched polymer, which was used as the novel nanofiller and successfully embedded into the polypiperazine-amide (PPA) active layers on polysulfone (PSU) substrates via interfacial polymerization (IP) process. The resultant NF membranes were characterized using ATR-FTIR, SEM, and AFM, while their performance was evaluated in terms of water flux, salt rejection, antifouling ability, and chlorine resistance. The influence of GO-HBE-COOH concentration on the morphologies, properties, and performance of TFN NF membranes was investigated. With the addition of 60 ppm GO-HBE-COOH, the TFN-GHC-60 NF membrane exhibited the optimal water flux without a sacrifice of the salt rejection. It was found that the introduction of GO-HBE-COOH nanosheets favored the formation of a thinner and smoother nanocomposite active layer with an enhanced hydrophilicity and negative charge. As a result, TFN NF membranes demonstrated a superior permeaselectivity, antifouling ability, and chlorine resistance over the conventional PPA thin-film composite (TFC) membranes.

Effect of pre-emulsified sesame oil on physical-chemical and rheological properties of pork batters

Abstract Physical-chemical and rheological properties of pork batters as affected by replacing pork back-fat with pre-emulsified sesame oil were investigated. Replacement of pork back-fat with pre-emulsified sesame oil, improved L* value, moisture and protein content, hardness, cohesiveness, and chewiness, declined a* value, fat content and energy, but not affect cooking yield. When used pre-emulsified sesame oil to replace pork back-fat 50%, the sample had the highest L* value and texture. According to the results of dynamic rheological, replaced pork back-fat by pre-emulsified sesame oil increased the storage modulus (G') values at 80 °C, and formed firm gel. The result of Low-field nuclear magnetic resonance (LF-NMR) shown that the batters with pre-emulsified sesame oil had higher water holding capacity than the control. Overall, the batters with pre-emulsified sesame oil enabled lowering of fat and energy contents, making the pork batter had better texture.

High-pressure effects on the molecular aggregation and physicochemical properties of myosin in relation to heat gelation.

Myosin was extracted from the M. psoas muscle of rabbits, and dissolved in 0.6M KCl buffer (pH6.5). Effects of high-pressure (HP, 100 to 300MPa, 9min, 25°C) treatment on myosin solubility, molecular traits (molecular weight and morphology), flow behavior and strength of heat-induced myosin gels were studied and compared with the untreated controls. Myosin subjected to 200MPa HP treatment had lower solubility than samples treated at other pressures (P<0.05). Molecular dimerization and morphological swelling of myosin was observed using gel-permeation chromatography and atomic-force microscopy. Additionally, the shear-thinning behavior of myosin solutions (10mg/mL) was improved by HP treatment (≥200MPa), and a positive trend in gel-strength enhancement was inferred. It is postulated that significant morphological changes in myosin accounted for changes in its functional properties, by the influence of HP treatment on protein-protein and/or protein-water interactions. There is a relationship between molecular morphology and the coalescing behavior of myosin, since significant changes of both attributes were observed at pressures ≥200MPa.

Antioxidant Activity and α-Glucosidase Inhibitory Activities of the Polycondensate of Catechin with Glyoxylic Acid.

In order to investigate polymeric flavonoids, the polycondensate of catechin with glyoxylic acid (PCG) was prepared and its chemically antioxidant, cellular antioxidant (CAA) and α-glucosidase inhibitory activities were evaluated. The DPPH and ABTS radical scavenging activities and antiproliferative effect of PCG were lower than those of catechin, while PCG had higher CAA activity than catechin. In addition, PCG had very high α-glucosidase inhibitory activities (IC50 value, 2.59 µg/mL) in comparison to catechin (IC50 value, 239.27 µg/mL). Inhibition kinetics suggested that both PCG and catechin demonstrated a mixture of noncompetitive and anticompetitive inhibition. The enhanced CAA and α-glucosidase inhibitor activities of PCG could be due to catechin polymerization enhancing the binding capacity to the cellular membrane and enzymes.

Preparation and characterization of foxtail millet bran oil using subcritical propane and supercritical carbon dioxide extraction.

The foxtail millet (Setaria italica Beauv) bran oil was extracted with traditional solvent extraction (SE), supercritical carbon dioxide extraction (SCE) and subcritical propane extraction (SPE) and analyzed the yield, physicochemical property, fatty acid profile, tocopherol composition, oil oxidative stability in this study. The yields of foxtail millet bran oil by SE, SCE and SPE were 17.14 %, 19.65 %, 21.79 % of raw material weight (corresponded to 75.54 %, 86.60 %, 96.03 % of the total amount of the oil measured by using Soxhlet extraction), respectively. The effect of the extraction methods on the physicochemical properties (peroxide value, saponification value and color) was significant while the difference in fatty acid profile was negligible based on GC analysis. The major components of vitamin E in the obtained oils were identified as α- and ß-tocopherols by HPLC, and SPE was superior to SE and SCE in the extraction of tocopherols. In Rancimat test, the oil obtained by SPE showed the highest oil oxidative stability, which could attribute to its high tocopherol content and low peroxide value. In view of oil quality, SPE employed smaller times and lower pressures compared to SE and SCE. SPE was a suitable and selective method for the extraction of the foxtail millet bran oil.