Fate-directed risk assessment of chemical mixtures: a case study for cedarwood essential oil.

The environmental risk assessment of UVCBs (i.e., substances of unknown or variable composition, complex reaction products, or biological materials) is challenging due to their inherent complexity. A particular problem is that UVCBs can contain constituents with unidentified chemical structures and/or have variable composition of constituents from batch to batch. Moreover, the composition of a UVCB in the environment is not the same as that of the UVCB in a product, meaning that a risk assessment based on environmental exposure to the UVCB in a product does not represent the actual environmental risk. Here we propose an in silico fate-directed risk assessment framework for UVCBs using cedarwood oil as a case study. The framework uses Monte Carlo simulations and the mass-balance models SimpleTreat and RAIDAR to provide quantitative information on whether unidentified constituents within the physical-chemical property space of a UVCB can be the decisive factor for the environmental risk of the entire UVCB. Thereby the framework provides a robust decision tool to evaluate if a UVCB risk assessment requires additional tests or if the data on known constituents is representative for the risk of the entire UVCB. In the case of cedarwood oil, it could be shown that a risk assessment based on the known constituents (representing around 70% of the overall UVCB by weight) is representative for the environmental risk of the entire UVCB - reducing the need for additional testing and test animals.

Variability in Toxicity of Plastic Leachates as a Function of Weathering and Polymer Type: A Screening Study with the Copepod Nitocra spinipes.

AbstractThe production and use of plastic over many decades has resulted in its accumulation in the world's oceans. Plastic debris poses a range of potential risks to the marine environment and its biota. Especially, the potential hazards of small plastic debris and chemicals associated with plastic have not been extensively studied. When buoyant plastic is exposed to ultraviolet radiation, it will slowly degrade and leach chemicals into surrounding waters. These leachates can include additives, sorbed organic pollutants, and degradation products of the plastic polymers. While most hazard assessments have focused on studying adverse effects due to the uptake of plastic, toxicity studies of the leachates of plastics are less common. To begin to address this knowledge gap, we studied the acute toxicity of leachates from diverse plastics in the harpacticoid copepod Nitocra spinipes. Our results show that leachates caused a higher toxicity after plastic was exposed to ultraviolet light compared to leaching in darkness. We observed differences in toxicity for different polymer types: polyvinyl chloride and polypropylene resulted in the most toxic leachates, while polystyrene and poly[ethylene terephthalate] were least toxic. Furthermore, we observed increased toxicity of leachates from some plastics that had been weathered in the real marine environment compared to matching new materials. Our results indicate that both weathering condition and polymer type influence the toxicity of plastic leachates.

Bioconcentration of cedarwood oil constituents in rainbow trout.

Cedarwood oil is an essential oil used as a fragrance material and insect repellent. Its main constituents are sesquiterpenes which are potentially bioaccumulative according to the REACH screening criteria. Cedarwood oil is a complex mixture of hydrophobic and volatile organic chemicals. The volatility and limited water solubility of its constituents are a challenge for standard bioconcentration factor (BCF) test methods using aqueous exposure. We used an abbreviated dietary exposure in vivo testing protocol with internal benchmark substances as "internal standards" to derive the BCF of cedarwood oil constituents using rainbow trout (Oncorhynchus mykiss). Internal benchmarking proved to be a useful tool to control for inter-individual variability, enabling us to calculate the BCF for all major cedarwood oil constituents as a mixture. We found that the BCF of two out of six analysed cedarwood oil constituents exceed a BCF of 5000 and two others exceed a BCF of 2000 (90% confidence level) even though we found evidence for biotransformation for individual constituents. The results of this study indicate that more work is warranted to study the bioaccumulation of essential oils and highlights the utility of internal benchmarking in in vivo dietary exposure BCF tests to increase robustness and allow for the BCF measurement of complex mixtures.

Steady-State Mass Balance Model for Predicting Particle-Gas Concentration Ratios of PBDEs.

Assuming equilibrium partitioning between the gas and particle phases has been shown to overestimate the fraction of low-volatility chemicals in the particle phase. Here, we present a new steady-state mass balance model that includes separate compartments for fine and coarse aerosols and the gas phase and study its sensitivity to the input parameters. We apply the new model to investigate deviations from equilibrium partitioning by exploring model scenarios for seven generic aerosol scenarios representing different environments and different distributions of emissions as the gas phase, fine aerosol, and coarse aerosol. With 100% of emissions as the particle phase, the particle-gas concentration ratio in our model is similar to the equilibrium model, while differences are up to a factor of 106 with 100% of emissions as the gas phase. The particle-gas concentration ratios also depend on the particle size distributions and aerosol loadings in the different environmental scenarios. The new mass balance model can predict the particle-gas concentration ratio with more fidelity to measurements than equilibrium models. However, further laboratory-based evaluations and calibrations of the standard sampling techniques, field investigations with preferably size-resolved measurements of aerosol particle composition, together with the appropriate process modeling for low-volatility chemicals are warranted.

Effects of Leachates from UV-Weathered Microplastic in Cell-Based Bioassays.

Standard ecotoxicological testing of microplastic does not provide insight into the influence that environmental weathering by, e.g., UV light has on related effects. In this study, we leached chemicals from plastic into artificial seawater during simulated UV-induced weathering. We tested largely additive-free preproduction polyethylene, polyethylene terephthalate, polypropylene, and polystyrene and two types of plastic obtained from electronic equipment as positive controls. Leachates were concentrated by solid-phase extraction and dosed into cell-based bioassays that cover (i) cytotoxicity; (ii) activation of metabolic enzymes via binding to the arylhydrocarbon receptor (AhR) and the peroxisome proliferator-activated receptor (PPARγ); (iii) specific, receptor-mediated effects (estrogenicity, ERα); and (iv) adaptive response to oxidative stress (AREc32). LC-HRMS analysis was used to identify possible chain-scission products of polymer degradation, which were then tested in AREc32 and PPARγ. Explicit activation of all assays by the positive controls provided proof-of-concept of the experimental setup to demonstrate effects of chemicals liberated during weathering. All plastic leachates activated the oxidative stress response, in most cases with increased induction by UV-treated samples compared to dark controls. For PPARγ, polyethylene-specific effects were partially explained by the detected dicarboxylic acids. Since the preproduction plastic showed low effects often in the range of the blanks future studies should investigate implications of weathering on end consumer products containing additives.

Abundance and composition of near surface microplastics and plastic debris in the Stockholm Archipelago, Baltic Sea.

We collected plastic debris in the Stockholm Archipelago using a manta trawl, and additionally along a transect in the Baltic Sea from the island of Gotland to Stockholm in a citizen science study. The samples were concentrated by filtration and organic material was digested using hydrogen peroxide. Suspected plastic material was isolated by visual sorting and 59 of these were selected to be characterized with Fourier transform infrared spectroscopy. Polypropylene and polyethylene were the most abundant plastics identified among the samples (53% and 24% respectively). We found nearly ten times higher abundance of plastics near central Stockholm than in offshore areas (4.2×105plastics km-2 compared to 4.7×104plastics km-2). The abundance of plastic debris near Stockholm was similar to urban areas in California, USA, and the overall abundance in the Stockholm Archipelago was similar to plastic abundance reported in the northwestern Mediterranean Sea.

Screening-level models to estimate partition ratios of organic chemicals between polymeric materials, air and water.

Polymeric materials flowing through the technosphere are repositories of organic chemicals throughout their life cycle. Equilibrium partition ratios of organic chemicals between these materials and air (KMA) or water (KMW) are required for models of fate and transport, high-throughput exposure assessment and passive sampling. KMA and KMW have been measured for a growing number of chemical/material combinations, but significant data gaps still exist. We assembled a database of 363 KMA and 910 KMW measurements for 446 individual compounds and nearly 40 individual polymers and biopolymers, collected from 29 studies. We used the EPI Suite and ABSOLV software packages to estimate physicochemical properties of the compounds and we employed an empirical correlation based on Trouton's rule to adjust the measured KMA and KMW values to a standard reference temperature of 298 K. Then, we used a thermodynamic triangle with Henry's law constant to calculate a complete set of 1273 KMA and KMW values. Using simple linear regression, we developed a suite of single parameter linear free energy relationship (spLFER) models to estimate KMA from the EPI Suite-estimated octanol-air partition ratio (KOA) and KMW from the EPI Suite-estimated octanol-water (KOW) partition ratio. Similarly, using multiple linear regression, we developed a set of polyparameter linear free energy relationship (ppLFER) models to estimate KMA and KMW from ABSOLV-estimated Abraham solvation parameters. We explored the two LFER approaches to investigate (1) their performance in estimating partition ratios, and (2) uncertainties associated with treating all different polymers as a single "bulk" polymeric material compartment. The models we have developed are suitable for screening assessments of the tendency for organic chemicals to be emitted from materials, and for use in multimedia models of the fate of organic chemicals in the indoor environment. In screening applications we recommend that KMA and KMW be modeled as 0.06 ×KOA and 0.06 ×KOW respectively, with an uncertainty range of a factor of 15.

Kinetics and Mechanism of the Oxidation of Cyclic Methylsiloxanes by Hydroxyl Radical in the Gas Phase: An Experimental and Theoretical Study.

The ubiquitous presence of cyclic volatile methylsiloxanes (cVMS) in the global atmosphere has recently raised environmental concern. In order to assess the persistence and long-range transport potential of cVMS, their second-order rate constants (k) for reactions with hydroxyl radical ((•)OH) in the gas phase are needed. We experimentally and theoretically investigated the kinetics and mechanism of (•)OH oxidation of a series of cVMS, hexamethylcyclotrisiloxane (D3), octamethycyclotetrasiloxane (D4), and decamethycyclopentasiloxane (D5). Experimentally, we measured k values for D3, D4, and D5 with (•)OH in a gas-phase reaction chamber. The Arrhenius activation energies for these reactions in the temperature range from 313 to 353 K were small (-2.92 to 0.79 kcal·mol(-1)), indicating a weak temperature dependence. We also calculated the thermodynamic and kinetic behaviors for reactions at the M06-2X/6-311++G**//M06-2X/6-31+G** level of theory over a wider temperature range of 238-358 K that encompasses temperatures in the troposphere. The calculated Arrhenius activation energies range from -2.71 to -1.64 kcal·mol(-1), also exhibiting weak temperature dependence. The measured k values were approximately an order of magnitude higher than the theoretical values but have the same trend with increasing size of the siloxane ring. The calculated energy barriers for H-atom abstraction at different positions were similar, which provides theoretical support for extrapolating k for other cyclic siloxanes from the number of abstractable hydrogens.

Organic Carbon/Water and Dissolved Organic Carbon/Water Partitioning of Cyclic Volatile Methylsiloxanes: Measurements and Polyparameter Linear Free Energy Relationships.

The sorption of cyclic volatile methyl siloxanes (cVMS) to organic matter has a strong influence on their fate in the aquatic environment. We report new measurements of the partition ratios between freshwater sediment organic carbon and water (KOC) and between Aldrich humic acid dissolved organic carbon and water (KDOC) for three cVMS, and for three polychlorinated biphenyls (PCBs) that were used as reference chemicals. Our measurements were made using a purge-and-trap method that employs benchmark chemicals to calibrate mass transfer at the air/water interface in a fugacity-based multimedia model. The measured log KOC of octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6) were 5.06, 6.12, and 7.07, and log KDOC were 5.05, 6.13, and 6.79. To our knowledge, our measurements for KOC of D6 and KDOC of D4 and D6 are the first reported. Polyparameter linear free energy relationships (PP-LFERs) derived from training sets of empirical data that did not include cVMS generally did not predict our measured partition ratios of cVMS accurately (root-mean-squared-error (RMSE) for logKOC 0.76 and for logKDOC 0.73). We constructed new PP-LFERs that accurately describe partition ratios for the cVMS as well as for other chemicals by including our new measurements in the existing training sets (logKOC RMSEcVMS: 0.09, logKDOC RMSEcVMS: 0.12). The PP-LFERs we have developed here should be further evaluated and perhaps recalibrated when experimental data for other siloxanes become available.

Historical intake and elimination of polychlorinated biphenyls and organochlorine pesticides by the Australian population reconstructed from biomonitoring data.

Quantifying the competing rates of intake and elimination of persistent organic pollutants (POPs) in the human body is necessary to understand the levels and trends of POPs at a population level. In this paper we reconstruct the historical intake and elimination of ten polychlorinated biphenyls (PCBs) and five organochlorine pesticides (OCPs) from Australian biomonitoring data by fitting a population-level pharmacokinetic (PK) model. Our analysis exploits two sets of cross-sectional biomonitoring data for PCBs and OCPs in pooled blood serum samples from the Australian population that were collected in 2003 and 2009. The modeled adult reference intakes in 1975 for PCB congeners ranged from 0.89 to 24.5ng/kgbw/day, lower than the daily intakes of OCPs ranging from 73 to 970ng/kgbw/day. Modeled intake rates are declining with half-times from 1.1 to 1.3years for PCB congeners and 0.83 to 0.97years for OCPs. The shortest modeled intrinsic human elimination half-life among the compounds studied here is 6.4years for hexachlorobenzene, and the longest is 30years for PCB-74. Our results indicate that it is feasible to reconstruct intakes and to estimate intrinsic human elimination half-lives using the population-level PK model and biomonitoring data only. Our modeled intrinsic human elimination half-lives are in good agreement with values from a similar study carried out for the population of the United Kingdom, and are generally longer than reported values from other industrialized countries in the Northern Hemisphere.

Rate Constants and Activation Energies for Gas-Phase Reactions of Three Cyclic Volatile Methyl Siloxanes with the Hydroxyl Radical.

Reaction with hydroxyl radicals (OH) is the major pathway for removal of cyclic volatile methyl siloxanes (cVMS) from air. We present new measurements of second-order rate constants for reactions of the cVMS octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6) with OH determined at temperatures between 313 and 353 K. Our measurements were made using the method of relative rates with cyclohexane as a reference substance and were conducted in a 140-mL gas-phase reaction chamber with online mass spectrometry analysis. When extrapolated to 298 K, our measured reaction rate constants of D4 and D5 with the OH radical are 1.9 × 10-12 (95% confidence interval (CI): (1.7-2.2) × 10-12) and 2.6 × 10-12 (CI: (2.3-2.9) × 10-12) cm3 molecule-1 s-1, respectively, which are 1.9× and 1.7× faster than previous measurements. Our measured rate constant for D6 is 2.8 × 10-12 (CI: (2.5-3.2) × 10-12) cm3 molecule-1 s-1 and to our knowledge there are no comparable laboratory measurements in the literature. Reaction rates for D5 were 33% higher than for D4 (CI: 30-37%), whereas the rates for D6 were only 8% higher than for D5 (CI: 5-10%). The activation energies of the reactions of D4, D5, and D6 with OH were not statistically different and had a value of 4300 ± 2800 J/mol.

YouTube as an information source for femoroacetabular impingement: a systematic review of video content.

PURPOSE: This study was carried out to assess the quality of information available on YouTube regarding femoroacetabular impingement (FAI). METHODS: YouTube was searched on September 7, 2013 using the search terms FAI, femoroacetabular impingement, and hip impingement. Analysis was restricted to the first 3 pages of results for each search term. English language was a prerequisite for inclusion. Videos were evaluated by 2 independent reviewers (M.G.M., D.J.H.) using novel scoring checklists for diagnosis and treatment of FAI. Interobserver reliability analysis was evaluated using the intraclass correlation coefficient (ICC). Videos were grouped according to quality assessment score, and the group means were analyzed for differences in video characteristics using the analysis of variance (ANOVA) model. Videos were characterized by the source of content. RESULTS: After filtering 1,288,324 potential videos, 52 videos were identified and included for analysis. The mean video quality assessment scores were 3.1 for diagnosis and 2.9 for treatment (maximum score = 16). No videos were scored as excellent (quality assessment score > 12). Effective resources included 3 videos on diagnosis and one video on treatment. No statistically significant differences were found between high- and low-scoring videos for duration, days online, views per day, likes, likes per day, likes per view, dislikes, or likes-dislikes difference for either diagnosis or treatment (P > .05 for all). The source of most of the videos was educational (67%), and most of these included physicians (66%). CONCLUSIONS: Patients searching YouTube for videos pertaining to FAI will be presented with a sizeable repository of content of overall low quality. As such, physicians need to recognize the potential influence of YouTube videos on patients' preconceptions of their conditions and the effect on the physician-patient consultation. This review highlights the need for evidence-based, comprehensive educational videos addressing FAI diagnosis and treatment. LEVEL OF EVIDENCE: Level V, systematic review of non-peer-reviewed resources.

Five Stereoactive Orbitals on Silicon: Charge and Spin Localization in the n-Si4Me10(-•) Radical Anion by Trigonal Bipyramidalization.

RIUMP2/def2-TZVPPD calculations show that in addition to its usual conformation with charge and spin delocalized over the Si backbone, the isolated Si4Me10(-•) radical anion also has isomeric conformations with localized charge and spin. A structure with localization on a terminal Si atom has been examined in detail. In vacuum, it is calculated to lie 11.5 kcal/mol higher in energy than the charge-and-spin delocalized conformation, and in water the difference is as little as 1.6 kcal/mol. According to natural orbital and localized orbital analyses, the charge-and-spin-carrying terminal Si atom uses five stereoactive hybrid orbitals in a trigonal bipyramidal geometry. Four are built mostly from 3s and 3p atomic orbitals (AOs) and are used to attach a Si3(CH3)7 and three CH3 groups, whereas the larger equatorial fifth orbital is constructed from 4s and 4p AOs and acts as a nonbonding (radical) hybrid orbital with an occupancy of about 0.65 e.

Diurnal fluctuations in polybrominated diphenyl ether concentrations during and after a severe dust storm episode in Kuwait City, Kuwait.

Concentrations of polybrominated diphenyl ethers (PBDEs) were quantified in four-hour integrated air samples obtained serially over a five day period in May 2007 in Kuwait City during and after a severe dust storm. The ∑PBDE concentrations ranged from 51 to 1307 pg m(-3) for the first two days of sampling and 20 to 148 pg m(-3) for the rest of the sampling period. The first two days of sampling occurred during a severe dust storm episode when the total suspended particulates (TSP) in air exceeded 1000 µg/m(3) with concentrations peaking during the day and decreasing at night. During this dust episode, the peak nighttime PBDE concentration was 30 times higher than the minimum daytime concentration. Although ∑PBDE concentrations peaked at night during the first two sampling days, the fluctuations in the BDE 47:99 ratio tracked changes in ambient temperature remarkably well, following a clear diurnal pattern. The fraction of congeners in the gas phase varied inversely with solar flux and was lower on days with a high number of hours of sunshine, suggesting that photolytic degradation of gas-phase PBDEs was occurring.

Dependence of persistence and long-range transport potential on gas-particle partitioning in multimedia models.

A novel approach of modeling gas-particle partitioning using polyparameter linear free energy relationships (ppLFERs) is implemented into three different multimedia box models (the OECD Pov and LRTP screening tool (The Tool), ChemRange, and CliMoChem) and compared to approaches based on the octanol-air partition coefficient (K(OA)). In all three multimedia models, calculated overall persistence is not strongly influenced (differences < 3%) by the gas-particle partitioning approach selected. The long-range transport potential (LRTP) is more sensitive to the choice of the gas-particle partitioning model. In CliMoChem, the LRTP of polar chemicals is higher if the ppLFER gas-particle partitioning approach is applied, with differences up to a factor of 2. Modeled concentrations of polar chemicals in Arctic air are also higher in the ppLFER version of CliMoChem. The model results obtained with the ppLFER approach are in good agreement with measured concentrations of alpha-HCH, methoxychlor, and trifluralin in Arctic air, whereas results from the K(OA)-based version of the model are in some cases lower by a factor of 10-100. If the required chemical property data are available, the ppLFER approach holds considerable potential to improve the gas-particle partitioning description for polar chemicals in multimedia models.

Alternative approaches for modeling gas-particle partitioning of semivolatile organic chemicals: model development and comparison.

We present a novel model of gas-particle partitioning based on polyparameter linear free energy relationships (ppLFERs) that is capable of representing a broad range of aerosol properties. We apply the model to semivolatile organic chemicals including PCBs, DDT, and polar pesticides, and compare it to a widely adopted model based on the octanol-air partition coefficient (K(OA)). For nonpolar chemicals and cases where sorption to aerosols is dominated by absorption into organic matter, the two models are highly correlated and both are appropriate. Significant differences between the models are found for (a) polar chemicals and (b) aerosols with low organic matter content. The explicit description of polar interactions in the ppLFER approach implies stronger interactions between chemicals and aerosols than the K(OA)-based model, which describes polar interactions only implicitly and to a limited extent. Practical application of the ppLFER-based model to a wide range of chemicals is currently limited by data gaps in measured Abraham solvation parameters and uncertainties in estimation methods.

Application of multimedia models for screening assessment of long-range transport potential and overall persistence.

We propose a multimedia model-based methodology to evaluate whether a chemical substance qualifies as POP-like based on overall persistence (Pov) and potential for long-range transport (LRTP). It relies upon screening chemicals against the Pov and LRTP characteristics of selected reference chemicals with well-established environmental fates. Results indicate that chemicals of high and low concern in terms of persistence and long-range transport can be consistently identified by eight contemporary multimedia models using the proposed methodology. Model results for three hypothetical chemicals illustrate that the model-based classification of chemicals according to Pov and LRTP is not always consistent with the single-media half-life approach proposed by the UNEP Stockholm Convention and thatthe models provide additional insight into the likely long-term hazards associated with chemicals in the environment. We suggest this model-based classification method be adopted as a complement to screening against defined half-life criteria at the initial stages of tiered assessments designed to identify POP-like chemicals and to prioritize further environmental fate studies for new and existing chemicals.