Performance of low shrinkage Bis-EFMA based bulk-fill dental resin composites.

OBJECTIVES: The purpose of this study was evaluating the performance of new Bis-EFMA based bulk-fill composites with common methacrylate based composites and commercial dental composites. METHODS: The Bis-EFMA monomer was synthesized and the novel Bis-EFMA based bulk-fill composites were prepared. The resin composite samples were co-cultured with human gingival epithelial cells and human dental pulp stem cells to test the biocompatibility. The edge adaptation was observed under a combination of stereoscope and scanning electron microscope. The internal hardness was measured using a Vickers microhardness tester after one-time filling of cavities prepared in extracted teeth. After friction and wear test on the surface of the resin composites, the surface morphology and volume wear of each group were measured by the optical profilometer. The color stability was measured by a colorimeter. RESULTS: Direct contact with human gingival epithelial cells and human dental pulp stem cells did not cause significant changes in their growth density and morphology, indicating good biocompatibility of Bis-EFMA group (p > 0.05). The continuous margin proportion of the Bis-EFMA group was as good as commercial bulk-fill composites (p > 0.05). The sectional microhardness results showed that the Bis-EFMA group had the highest microhardness. After the friction and wear test, the volume wear of the Bis-EFMA group was minimal, indicating its good wear resistance and mechanical strength. Color changes in all resin groups after 28 days of immersion were within the clinically acceptable range. SIGNIFICANCE: The addition of Bis-EFMA demonstrated excellent biocompatibility, edge adaptation and color stability comparable to commonly used clinical bulk-fill composites, along with preferable mechanical strength, friction and wear resistance. Bis-EFMA based bulk-fill composites have the potential to be employed as a bulk filling material in commercial dental composite applications.

Odontogenic and anti-inflammatory effects of magnesium-doped bioactive glass in vital pulp therapy.

This study aimed to investigate the effects of magnesium-doped bioactive glass (Mg-BG) on the mineralization, odontogenesis, and anti-inflammatory abilities of human dental pulp stem cells (hDPSCs). Mg-BG powders with different Mg concentrations were successfully synthesized via the sol-gel method and evaluated using x-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. Apatite formation was observed on the surfaces of the materials after soaking in simulated body fluid. hDPSCs were cultured with Mg-BG powder extracts in vitro, and no evident cytotoxicity was observed. Mg-BG induced alkaline phosphatase (ALP) expression and mineralization of hDPSCs and upregulated the expression of odontogenic genes, including those encoding dentin sialophosphoprotein, dentin matrix protein 1, ALP, osteocalcin, and runt-related transcription factor 2. Moreover, Mg-BG substantially suppressed the secretion of inflammatory cytokines (interleukin [IL]-4, IL-6, IL-8, and tumor necrosis factor-alpha). Collectively, the results of this study suggest that Mg-BG has excellent in vitro bioactivity and is a potential material for vital pulp therapy of inflamed pulps.

LL-37 inhibits LPS-induced inflammation and stimulates the osteogenic differentiation of BMSCs via P2X7 receptor and MAPK signaling pathway.

Oral diseases, such as periapical periodontitis and periodontitis, are characterized by inflammation-induced bone loss. LL-37, a human antimicrobial peptide (AMP), has multiple biological functions and the potential to promote osteogenesis. Therefore, this study aimed to investigate the regulatory effects of LL-37 within normal and inflammatory microenvironments. The roles of P2X7 receptor (P2X7R) and mitogen-activated protein kinase (MAPK) signaling pathway were also demonstrated. The results showed that LL-37 promoted bone marrow stromal cell (BMSC) proliferation, migration and osteogenic differentiation. LL-37 inhibited the expression of the inflammatory cytokines interleukin-1ß (IL-1ß), tumor necrosis factor-α (TNF-α) and receptor activator of nuclear factor kappa-B ligand (RANKL) at both protein and gene levels, and attenuated the lipopolysaccharide (LPS)-induced inhibition of osteogenesis. Immunofluorescence (IF) confirmed P2X7R expression in BMSCs. BBG, a P2X7R antagonist, significantly attenuated LL-37-promoted osteogenesis. The phosphorylation of extracellular signal-regulated kinase 1/2 (ERK1/2) and c-Jun NH2-terminal kinase (JNK) increased after LL-37 stimulation, which did not affect p38 phosphorylation. The effects of LL-37 on osteogenesis-related gene expression were markedly attenuated by selective inhibitors of ERK1/2 and JNK. Furthermore, a mouse model of LPS-stimulated calvarial osteolysis was established, and results showed that LL-37 markedly inhibited osteoclastic bone resorption. In conclusion, we speculate that LL-37 inhibits inflammation and promotes BMSC osteogenesis via P2X7R and MAPK signaling pathway.

[Biomimetic mineralization of a single-layer reconstituted type I collagen model induced by sodium tripolyphosphate and polyacrylic acid].

OBJECTIVE: To investigate the functions of sodium tripolyphosphate (STTP) and polyacrylic acid (PAA) in the process of collagen biomimetic mineralization. This would allow future applications to other collagen matrices such as bone collagen or 3-D collagen scaffolds. METHODS: Glass cover slips and transmission electron microscopy (TEM) grids were coated with reconstituted typeIcollagen fibrils. Mineralization of the reconstituted collagens was demonstrated with scanning electron microscopy (SEM) and TEM using a Portland cement-containing resin composite and a phosphate-containing fluid in the presence of PAA and STTP. The rest were immersed in a biomimetic remineralization medium without PAA and/or STTP (control). RESULTS: In the presence of PAA and STTP in the mineralization medium, intrafibrillar mineralization based on the non-classical crystallisation pathway could be identified. Mineral phases were evident within the collagen fibrils as early as 12 h after the initially-formed amorphous calcium phosphate nanoprecursors were transformed into apatite nanocrystals. Collagens at 72 h were heavily mineralized with periodically arranged intrafibrillar apatite platelets. Conversely, only large mineral spheres with no preferred association with collagen fibrils were observed in the absence of biomimetic analogues in the medium (control). CONCLUSIONS: Intrafibrillar apatite deposition can be achieved via biomimetic mineralization system containing PAA and STTP when amorphous calcium phosphate precursor is stabilized.

In vitro cytotoxicity evaluation of a self-adhesive, methacrylate resin-based root canal sealer.

This study compared the cytotoxicity of MetaSEAL (Parkell Inc, Farmington, NY), a methacrylate resin-based sealer with an epoxy resin-based (AH Plus Jet; Dentsply Caulk, Milford, DE) and a zinc oxide-eugenol-based sealer (Pulp Canal Sealer; SybronEndo, Orange, CA). Five-millimeter diameter disks prepared from the respective sealer and disks prepared from Teflon (negative control) and polymethyl methacrylate (positive control) were placed in direct contact with a rat osteosarcoma (ROS) 17/2.8 rat osteoblast-like cell line at six intervals after setting completely at 72 hours and for 5 succeeding weeks after the disks were immersed in simulated body fluid. Succinate dehydrogenase activity was evaluated by using 3-(4,5-dimethylthiazole-2-yl)-2,5-diphenyl tetrazolium bromide assay. All sealers exhibited severe toxicity at 72 hours, after which toxicity decreased gradually over the experimental period except for Pulp Canal Sealer, which remained severely toxic. MetaSEAL was more toxic than AH Plus Jet during the first week. Both were similar to the toxicity profile of the positive control after the first week, which was probably diffusion controlled.

[Root canal therapy of resinified teeth with surgical operating microscope and ultrasonic instruments].

PURPOSE: To evaluate the role of surgical operating microscope and ultrasonic instruments in endodontic treatment of patients who underwent previous resinifying therapy. METHODS: 63 premolars and molars that had been treated with resinifying therapy before were selected for root canal therapy. The coronal portion of resinified root canals were negotiated with ultrasonic instruments under surgical operating microscope, and the apical portion was managed with small size hand files and 15% EDTA. The root canals of all cases were shaped by Nickel-Titanium rotary instruments Hero 642, and obturated with lateral condensation technique. The negotiation of root canal system, instrument fracture, alterations of canal morphology, and operation time were recorded. The efficiency of preparation and obturation was analyzed by radiographs before and after treatment. RESULTS: The root canals of 54 teeth were negotiated, enlarged and obturated, with a success rate of 85.7%. No complications were found, such as vertical fracture, ledge, perforation and instrument separation. Good result of treatment was achieved in the 54 cases. CONCLUSIONS: The use of surgical operating microscope and ultrasonic instruments is proved to be effective in negotiation of coronal portion of the resinified root canals. Nevertheless, the use of ultrasonic instruments in apical or curved portion of root canals is not encouraged.

Proteomic profiling in the sera of workers occupationally exposed to arsenic and lead: identification of potential biomarkers.

Arsenic (As) and lead (Pb) are important inorganic toxicants in the environment. Frequently, humans are exposed to the mixtures of As and Pb, but little is known about the expression of biomarkers resulting from such mixed exposures. In this study, we analyzed serum proteomic profiles in a group of smelter workers with the aim of identifying protein biomarkers of mixed As and Pb exposure. Forty-six male workers co-exposed to As and Pb were studied. Forty-five age-matched male office workers were chosen as controls. Urine As and blood Pb concentrations were determined. Serum proteomic profiles were analyzed by Surface-Enhanced Laser Desorption/Ionization Time-Of-Flight (SELDI-TOF) mass spectrometer on the WCX2 ProteinChip. Using Recursive support vector machine (RSVM) algorithm, a panel of five peptides/proteins (2097 Da, 2953 Da, 3941 Da, 5338 Da, and 5639 Da) was selected based on their collective contribution to the optional separation between higher metal mixture exposure and non-exposure controls. Among these five selected markers, the 3941 Da was down-regulated and the four other proteins were up-regulated. Descriptive statistics confirmed that these five proteins differed significantly between metal exposure and non-exposure. Interestingly, the combined use of the five selected biomarkers could achieve higher discriminative power than single marker. These results demonstrated that proteomic technology, in conjunction with bioinformatics tools, could facilitate the discovery of new and better biomarkers of mixed metal exposure.