A strategy for As(III) determination based on ultrafine gold nanoparticles decorated on magnetic graphene oxide.

In this work, a new dendrimer modified magnetic graphene oxide (GO) was used as a substrate for electrodeposition of Au nanoparticles. The modified magnetic electrode was employed for sensitive measuring of As(III) ion as a well-established human carcinogen. The prepared electrochemical device exhibits excellent activity towards As(III) detection using the square wave anodic stripping voltammetry (SWASV) protocol. At optimum conditions (deposition potential at -0.5 V for 100 s in 0.1 M acetate buffer with pH 5.0), a linear range from 1.0 to 125.0 µgL-1 with a low detection limit (calculated by S/N = 3) of 0.47 µg L-1 was obtained. In addition to the simplicity and sensitivity of the proposed sensor, its high selectivity against some major interfering agents, such as Cu(II) and Hg(II) makes it an appreciable sensing tool for the screening of As(III). In addition, the sensor revealed satisfactory results for detection of As(III) in different water samples, and the accuracy of obtained data were confirmed by inductively coupled plasma atomic emission spectroscopy (ICP-AES) setup. Accounting for the high sensitivity, remarkable selectivity and good reproducibility, the established electrochemical strategy has great potential for analysis of As(III) in environmental matrices.

Mn(III) Schiff base complexes containing crown ether rings immobilized onto MCM-41 matrix as heterogeneous catalysts for oxidation of alkenes.

Six catalysts MnL1-MnL6, containing two crown ether rings and their analogs supported on the MCM-41 heterogeneous substrate (MnL1@MCM41-MnL5@MCM41) were synthesized and characterized. A mixture of molecular oxygen, as an oxidant, and these catalysts were used for the epoxidation of styrene. As a general result, the supported catalysts showed better performance compared with the unsupported analogs. On the other hand, the supported species, in addition to recyclability, did not require an axial base and reducing agent.

Studying Adsorption and Cellular Toxicity of Boron Nitride Nanostructure versus Melphalan Anti-ovarian Cancer Drug.

BACKGROUND: Inclusion of anticancer drugs into biocompatible nanoparticulate carriers decreases the general toxicity and improves the efficacy of clinical treatments due to the reduction of soluble circulating free drugs. METHODS: In addition, removal of emerging drug contaminants from wastewaters is a necessity that should be seriously attended. Boron nitride (BN) is a choice in drug delivery because of its many surprising properties. Here, boron nitride nanoparticles are prepared, characterized by Fourier-transform infrared spectroscopy (FT-IR) and x-ray diffraction (XRD) and used in the delivery of melphalan anti-cancer drug. RESULTS: Then, density functional theory (DFT) calculations are carried out to study the adsorption of this drug on the surface of pure boron nitride fullerene via familiar hybrid functionals B3LYP and B3PW91. In addition, the polarizable continuum model (PCM) calculations show that BN is stable in water. CONCLUSION: Finally, the in vitro cellular toxicity and viability of BN nanoparticles was examined on ES-2 cancer cells. The inhibitory dose IC50 of the material confirmed acceptable cytotoxicity and nanoparticles affected the average growth of the ES-2 cancer cells.

Glutathione-stabilized Fe3 O4 nanoparticles as the sorbent for magnetic solid-phase extraction of diazepam and sertraline from urine samples through quantitation via high-performance liquid chromatography.

The synthesis and application of glutathione-coated magnetic nanocomposite were introduced with the purpose of developing a stable, cheap, operationally convenient, simple, fast, sensitive, and selective device for the microextraction of diazepam and sertraline for the first time. The prepared glutathione@Fe3 O4 nanocomposite was used as the sorbent in the form of magnetic solid-phase extraction. Afterward, the extracted analytes were desorbed by organic solvent and analyzed by high-performance liquid chromatography-ultraviolet detection. Several influential variables such as desorption time, desorption volume, sample pH, extraction time, and sorbent amount were screened through Plackett-Burman design and then optimized via Box-Behnken design. The obtained results showed that the above-mentioned method enjoys a good linear range (0.2-500 µg/L) with the coefficient of determination higher than 0.9927, low limits of determination (0.07-0.24 µg/L), acceptable limits of quantification (0.22-0.93 µg/L), good enrichment factors (128 and 153), and good spiking recoveries (95-105%) for diazepam and sertraline under the obtained optimized condition. Analyzing the real samples results in the confirmation of the presented method and it can be applied for the analysis of various organic compounds in biological samples.

Graphene oxide/polydimethylsiloxane-coated stainless steel mesh for use in solid-phase extraction cartridges and extraction of polycyclic aromatic hydrocarbons.

The stainless steel mesh, in the form of the disk, was coated with graphene oxide and poly(dimethylsiloxane) (GO-PDMS) by sol-gel technique. The coated stainless steel meshes are loaded in the mini-column as solid-phase extraction cartridge for the fast isolation and preconcentration of polycyclic aromatic hydrocarbons (PAHs) from real water samples. The extracted PAHs (naphthalene, acenaphthene, acenaphthylene, anthracene, benz[a]anthracene, fluorene, and pyrene) were quantified by gas chromatography-mass spectrometry. The operation parameters affecting the extraction efficiency including sample volume, desorption conditions, and ionic strength were investigated. At optimized conditions, the linearity of this method is obtained from 0.001 to 20 ng mL-1 with 0.2 to 1.0 pg mL-1 limit of detection. For 5 replicates at 3 spiking levels (0.1, 1, and 10 ng mL-1), the relative standard deviations between 4.0 and 6.3% were achieved. The absolute extraction recovery varied from 89.1 to 94.7%. The enrichment factors were in the range of 2227-2367. The method has been employed in the determination of PAHs in the real water samples including well water, tap water, river water, and wastewater. Relative recoveries are between 95.2 and 100.9%. Graphical abstractSchematic representation of the SPE procedure using the self-assembly SPE cartridge.