Mechanically Aligned Second-Generation Medial Pivot Primary Total Knee Arthroplasty Does Not Reproduce Normal Knee Biomechanics: A Gait Analysis Study.

Background: This study aimed to evaluate post-operative lower limb function following second-generation mechanically aligned medial pivot (MP) TKA implantation. Standard gait analysis was performed to collect kinematic and kinetic data, which were then compared with physiological data from the literature obtained using the same evaluation methodology as the present study. The hypothesis was that this TKA would not fully restore normal knee and adjacent joint motion during walking. Methods: Our cohort comprised 15 patients consecutively enrolled from September 2019 to December 2022 who underwent primary TKA with the second-generation MP Evolution Knee System (MicroPort Orthopaedics Inc., Arlington, TN, USA). Pre-operatively and 6 months post-surgery, gait analysis during level walking was performed on all patients, as well as clinical evaluations using the Knee Society Score (KSS), the Knee Injury and Osteoarthritis Outcome Score (KOOS), and the Visual Analogue Scale (VAS). Results: The clinical scores improved significantly (p < 0.001) after surgery (pre-/post-operative KSS functional, KSS clinical, VAS, and KOOS: 51.7 ± 17.3/84 ± 18.4, 45.3 ± 16.2/74.1 ± 12.6, 6.9 ± 1.8/2.0 ± 1.9, and 33.9 ± 11.8/69.1 ± 16.5, respectively). The statistical parametric mapping (SPM) analysis between the post-operative and reference control data revealed significant differences in the initial and final 20% of the gait cycle for the rotation of the knee in the frontal and transverse planes and for the rotation of the ankle in the sagittal plane. Conclusions: This study shows that new-generation MP TKA with mechanical alignment does not fully restore normal gait biomechanics, particularly in knee rotational movements, indicating a need for improved surgical techniques and prosthetic designs.

Does gait influence biomechanics in a distal femoral osteotomy? An early post operative fracture after DFO above a Tomofix® plate in a multiple sclerosis and low-density bone affected patient: choose a longer plate-a case report.

BACKGROUND: Distal femur osteotomies are a well known and valuable treatment option to manage valgus malalignment with unicompartmental arthritis. Early postoperative complications are well known, and risk factors, such as pulmonary diseases, smoke, high dependent functional status, and body mass index, have been studied, but no study is available about osteotomies when gait is abnormal because of neurodegenerative conditions or when mineral density is below the normal rate. CASE PRESENTATION: We report the case of a 44 year-old female Mediterranean patient who underwent a biplanar distal femur opening wedge osteotomy surgery following a lateral meniscus total removal, which led to the subsequent development of lateral compartment osteoarthritis and pain, despite general comorbidities, such as multiple sclerosis. Additionally, 2 months later a supracondylar femur fracture above the previously applied Tomofix® plate was reported. Fracture was treated by applying a LCP condylar 16 hole (336 mm) plate, a structural fibular graft, and strut fibular graft on the opposite side. CONCLUSION: The overall aim of this case report is to provide a lesson to surgeons who want to perform a realignment surgery of the lower limb in patients with abnormal gait. Not only mechanical axes are to be considered, but also bone density, patient's gait, and load force distribution along the bone stock. Emerging literature on three-dimensional cutting guides fails to account for these factors, thus promoting a standardized approach to surgery across all patients. The present case highlights a patient with low bone density and abnormal force distribution resulting from a pathologic neurodegenerative gait. In such cases, treatment decisions must carefully consider the biomechanical vulnerabilities of the native bone and the distribution of vector forces. These conditions must lead the choice toward a longer plate if an osteotomy is indicated, because surgery is more likely to fail.

Anterior Cruciate Ligament Over-The-Top Plus Lateral Plasty and Minimally Invasive Double-Bundle Posteromedial Corner Reconstruction.

The medial collateral ligament (MCL) and the posteromedial corner (PMC) of the knee are essential structures for maintaining medial knee stability. Chronic MCL instability is infrequent but can necessitate surgical intervention. Various surgical techniques have been described, but they often involve the use of tibial tunnels, which may complicate concurrent ligament reconstructions. This study aims to present a minimally invasive double-bundle PMC reconstruction technique that avoids the use of tibial tunnels. Knee evaluation was performed using standard clinical tests and 1.5-Tesla magnetic resonance imaging. Patients with grade III Hughston MCL injuries were considered for surgery. The technique employs either an autologous semitendinosus graft or a fresh-frozen allograft, usually tibialis anterior, to reconstruct both the superficial MCL and the posterior oblique ligament. The technique described avoids the use of tibial tunnels, preserving tibial bone stock for any future procedures. The graft is secured at the femoral and tibial insertions using bioabsorbable interference screws and titanium staples, respectively. Our minimally invasive double-bundle PMC reconstruction technique offers a feasible and effective solution for patients with chronic medial knee instability. It is particularly beneficial for patients requiring multiple ligament reconstructions, as it avoids tunnel collision and preserves tibial bone stock.

Conversion of failed revision total knee arthroplasty in arthrodesis with modular nail maintaining the uncemented femoral stem in patient with extensor mechanism insufficiency: a case report.

BACKGROUND: The transition from revision total knee arthroplasty (RTKA) to arthrodesis involves the replacement of cemented femoral and tibial stems with a modular nail designed for arthrodesis. This conversion process is associated with challenges such as bone loss, blood loss, and prolonged surgical durations. Effectively addressing these complexities through a less invasive surgical approach could be pivotal in enhancing patient outcomes and minimizing associated complications. CASE PRESENTATION: A 75-year-old white Caucasian female patient with a revision total knee arthroplasty (RTKA) performed with a modular uncemented rotating-hinge system, reporting an history of recurrent patellar dislocation, was referred to our institution after a fall resulting in periprosthetic tibial plateau fracture. The fracture was treated with open reduction and internal fixation, but afterwards the patient had been unable to walk again. Tibial stem was mobilized, and extensor mechanism was insufficient due to chronic incomplete quadriceps tendon rupture. The femoral stem was stable, so we decided to convert the rotating-hinge in a arthrodesis with an uncemented modular knee fusion nail maintaining the previous femoral stem. CONCLUSIONS: The result was a successful arthrodesis with minimal bone and blood loss, reduced operative time, and optimal functional outcome at the one-year follow-up. This case highlights the advantage of using a modular knee revision platform system that gives the opportunity to convert a RTKA in arthrodesis.

Custom-made implants for massive acetabular bone loss: accuracy with CT assessment.

BACKGROUND: Custom-made implants are a valid option in revision total hip arthroplasty to address massive acetabular bone loss. The aim of this study was to assess the accuracy of custom-made acetabular implants between preoperative planning and postoperative positioning using CT scans. METHODS: In a retrospective analysis, three patients who underwent an acetabular custom-made prosthesis were identified. The custom-made designs were planned through 3D CT analysis considering surgical points of attention. The accuracy of intended implants positioning was assessed by comparing pre- and postoperative CT analyzing the center of rotation (CoR), anteversion, inclination, screws, and implant surface in contact with the bone. RESULTS: The three cases presented satisfactory accuracy in positioning. A malpositioning in the third case was observed due to the posterization of the CoR of the implant of more than 10 mm. The other CoR vectors considered in the third patient and all vectors in the other two cases fall within 10 mm. All the cases were positioned with a difference of less than 10° of anteversion and inclination with respect to the planning. CONCLUSIONS: The current case series revealed promising accuracy in the positioning of custom-made acetabular prosthesis comparing the planned implant in preoperative CT with postoperative CT.

Wider translations and rotations in posterior-stabilised mobile-bearing total knee arthroplasty compared to fixed-bearing both implanted with mechanical alignment: a dynamic RSA study.

PURPOSE: The purpose of this study was to investigate the in vivo kinematics of the same femoral design mechanically aligned posterior-stabilised (PS) total knee arthroplasty (TKA) with either fixed-bearing (FB) or mobile-bearing (MB) inlay, implanted by the same surgeon, using model-based dynamic radiostereometric analysis (RSA). The hypothesis of the present study was that the MB design would show wider axial rotation than the FB design, without affecting the clinical outcomes. MATERIALS AND METHODS: A cohort of 21 non-randomised patients (21 DePuy Attune PS-FB) was evaluated by dynamic RSA analysis at a minimum 9-month follow-up, while performing differently demanding daily living activities such as sit to stand (STS) and deep knee lunge (DKL). Kinematic data were compared with those of a cohort of 22 patients implanted with the same prosthetic design but with MB inlay. Anterior-posterior (AP) translations, varus-valgus (VV) and internal-external (IE) rotations of the femoral component with respect to the tibial baseplate were investigated. Translation of medial and lateral compartment was analysed using the low point method according to Freeman et al. Questionnaires to calculate objective and subjective clinical scores were administered preoperatively and during follow-up visit by the same investigator. RESULTS: The FB TKA design showed lower AP translation during STS (6.8 ± 3.3 mm in FB vs 9.9 ± 3.7 mm in MB, p = 0.006*), lower VV rotation (1.9 ± 0.8° in FB vs 5.3 ± 3.3° in MB, p = 0.005) and lower IE rotation (2.8 ± 1.1° in FB vs 9.5 ± 4.3° in MB, p = 0.001) during DKL than the mobile-bearing TKA design. Posterior-stabilised FB group showed significant lower translation of the low point of the medial compartment than the MB group (p = 0.008). The percentage of patients performing medial pivot in the FB group was higher compared to MB group in the examined motor tasks. No significant differences in post-operative range of motion (117° ± 16° for FB group and 124° ± 13° for MB group) and in clinical outcomes emerged between the two cohort. CONCLUSIONS: The FB and MB designs differed in AP translations, VV rotations and IE rotations of the femoral component with respect to the tibial component in STS and DKL. Furthermore, FB cohort reported a significant higher percentage of medial pivot with respect to MB cohort. Despite this, no differences in clinical outcomes were detected between groups. Both designs showed stable kinematics and represent a viable option in primary TKA. LEVEL OF EVIDENCE: Prospective cohort study, II.

Arthroscopic approach does not yield better results than open surgery after subscapularis repair: a systematic review.

PURPOSE: This study aimed to compare the long-term outcomes of arthroscopic versus mini-open repair in patients with isolated subscapularis tendon tears. METHODS: Google Scholar, PubMed, and Embase databases were searched for studies evaluating isolated subscapularis tears subsequently treated by arthroscopic or mini-open repair. The inclusion criteria were clinical studies reporting isolated subscapularis lesions treated by arthroscopic or mini-open repair, a minimum follow-up of 12 months, and clinical and functional outcomes reported in the study results. Articles not reporting functional outcomes or studies that reported results for anterosuperior rotator cuff tears without a separate analysis of subscapularis tendon tears were excluded. Studies older than 20 years and studies with a minimum follow-up of less than 12 months were also excluded. RESULTS: A total of 12 studies met the inclusion criteria; 8 papers were included in the arthroscopic repair group, and 6 were included in the mini-open repair group (2 studies reported results for both techniques). The mean age reported was 49.3 years, and 85.1% of patients were male. The dominant limb was involved in 77.6% of the patients, and a traumatic onset of symptoms was verified in 76.3%. The mean time to surgery was 9.6 months. The Constant-Murley score showed positive results for the arthroscopic and mini-open groups, with mean postoperative values of 84.6 and 82.1, respectively. Promising results were also observed for pain, with a mean of 13.2 (out of 15) points for the arthroscopic group and 11.7 for the mini-open group. The long head of the biceps was involved in 78% of the patients, and LHB tenodesis or tenotomy were the most common concomitant procedures performed. CONCLUSIONS: There was no significant difference in clinical and functional outcomes between open and arthroscopic repair. Moreover, the same complication rates were reported in both treatments, but arthroscopic repair led to less postoperative pain. LEVEL OF EVIDENCE: IV.

Intra- and inter-operator reliability assessment of a novel extramedullary accelerometer-based smart cutting guide for total knee arthroplasty: an in vivo study.

PURPOSE: The purpose is to verify the intra- and inter-operator reliability of an extramedullary (EM) accelerometer-based smart cutting guide for distal femoral resection during primary total knee arthroplasty (TKA). The hypothesis of the present study was that the use of the device would result in a good correlation between different operators with a difference between repeated measurements of less than 1°. METHODS: Twenty-five not consecutive patients with knee osteoarthritis undergone to primary TKA using an EM inertial-based cutting guide to perform distal femoral resection. In order to assess the agreement in femoral axis definition of the device, two operators performed three time each the manoeuvres necessary to define axis. Inter-rater agreement was evaluated with Bland and Altman agreement test. Intra-rater repeatability was evaluated analysing average results distribution of repeated measurements. Accuracy of the device was evaluated comparing differences between intra-operative device data with final implant alignment measured on post-operative longstanding x-rays using Students' t test. RESULTS: Agreement between the two operators was statistically significant (p < 0.05) with a bias of - 0.4° (95% CI - 0.6° to - 0.2°). Average difference between cut orientation measured with device and final implant position, measured on x-rays, was 0.2° (95% CI - 1.5° to 1.7°) with no statistical difference between the two measurements. Final implant alignment, measured on x-ray, was 90.2°, with 95% of cases distributed within range 88.0° to 92.0° for varus-valgus and 2.8° and with 95% of cases distributed within range 2.0° to 4.0° for flexion-extension. CONCLUSIONS: The EM accelerometer-based smart cutting guide used to perform distal femoral resection during primary TKA demonstrated a good intra- and inter-operator reliability in the present in vivo study.

Lateral unicompartmental knee arthroplasty (UKA) showed a lower risk of failure compared to medial unicompartmental knee arthroplasty in the Register of Prosthetic Orthopedic Implants (RIPO).

INTRODUCTION: The present study aimed to investigate differences in survivorship between medial and lateral unicompartmental knee arthroplasty (UKA) by analyzing the data of an Italian regional registry. The hypothesis was that, according to recent literature, lateral implants have comparable survivorship with regard to the medial implants. MATERIALS AND METHODS: The Register of Orthopaedic Prosthetic Implants (RIPO) of Emilia-Romagna (Italy) database was searched for all UKAs between July 1, 2000, and December 31, 2019. For both cohorts, subject demographics and reasons for revision were presented as a percentage of the total cohort. Kaplan-Meier survivorship analysis was performed using revision of any component as the endpoint and survival times of unrevised UKAs taken as the last observation date (December 31, 2019, or date of death). RESULTS: Patients living outside the region and symmetrical implants (which do not allow the compartment operated to be traced) were excluded. 5571 UKAs implanted on 5172 patients (5215 medial UKAs and 356 lateral UKAs) were included in the study. The survivorship analysis revealed 13 failures out of 356 lateral UKAs (3.7%) at a mean follow-up of 6.3 years and 495 failures out of 5215 medial UKAs (9.5%) at a mean follow-up of 6.7 years. The medial UKAs had a significantly higher risk of failure, with a Hazard Ratio of 2.6 (CI 95% 1.6-4.8; p < 0.001), adjusted for age, gender, weight, and mobility of the insert. Both the groups revealed a good survival rate, with 95.2% of lateral implants and 87.5% of medial implants still in situ at 10 years of follow-up. CONCLUSIONS: Lateral UKA is a safe procedure showing longer survivorship than medial UKAs (95.2% and 87.5% at 10 years, respectively) in the present study. LEVEL OF EVIDENCE: Level 3, therapeutic study.

Custom-Made Implants in Ankle Bone Loss: A Retrospective Assessment of Reconstruction/Arthrodesis in Sequelae of Septic Non-Union of the Tibial Pilon.

Background and Objectives: Treating segmental tibial and ankle bone loss after radical surgery for chronic osteomyelitis is one of the most challenging problems encountered by orthopaedic surgeons. Open tibia and ankle fractures occur with an incidence of 3.4 per 100,000 and 1.6 per 100,000, respectively, and there is a high propensity of developing fracture-related infection with associated chronic osteomyelitis in patients. Segmental tibial and ankle bone loss have recently received new and improved treatments. Materials and Methods: Above all, 3D printing allows for the customization of implants based on the anatomy of each patient, using a personalized process through the layer-by-layer deposition of materials. Results: This article presents different cases from the authors' experience. Specifically, four patients suffered tibia and ankle fractures and after radical surgery for chronic osteomyelitis combined with high-performance antibiotic therapy underwent ankle reconstruction/arthrodesis with custom-made tibial spacers. Conclusions: Thanks to 3D-printed patient-specific devices, it is possible to perform surgical procedures that, for anatomical reasons, would have been impossible otherwise. Moreover, an improvement in overall functionality and an important reduction in pain were shown in the last follow-up in all patients.

Bilateral Knee Arthroplasty in Patients Affected by Windswept Deformity: A Systematic Review.

BACKGROUND: "Windswept" deformity (WSD) consists of a non-frequent condition in which the patient presents a valgus deformity in one knee and a varus deformity in the other. We performed a review of the available literature to aggregate the accessible data on the outcomes of bilateral knee arthroplasty in patients with WSD and to discuss the surgical challenges that this condition might pose. METHODS: A systematic review of the literature following the PRISMA guidelines was conducted. The relevant studies between 1979 and 2021 were identified. Four studies with a total of 68 patients were included for analysis. The mean follow-up for varus knees was 3.3 years, 3.1 years for valgus knees. The quality and rigor of the included studies was assessed using the Methodological index for non-randomized studies (MINORS). RESULTS: All the studies reported improvement in knee function following knee replacement surgery, and a reduction in axial deviation of both knees, with similar results in valgus and varus knees in terms of patient satisfaction. The most relevant data were that unicompartmental knee arthroplasty (UKA) allowed for limited axial correction with slightly inferior functional results. Kinematic alignment (KA) allowed for similar results in both knees. CONCLUSION: The present review shows how satisfactory results can be achieved in both knees in patients with WSD and osteoarthrosis (OA). However, the operating surgeon should be aware of the importance of the implant choice in terms of functional outcomes. In the absence of extra-articular deformities, calipered KA total knee arthroplasty (TKA) can be performed on both knees with good axial correction and functional outcome. LEVEL OF EVIDENCE: II -Systematic review of cohort studies.

No kinematical difference between ultra-congruent and medial-congruent total knee arthroplasty when implanted with mechanical alignment: an in vivo dynamic RSA study.

PURPOSE: To explore in vivo kinematical behavior of the same total knee arthroplasty (TKA) cruciate-retaining (CR) femoral design with either medial-congruent (MC) or ultra-congruent (UC) inlay using model-based dynamic radiostereometric analysis (RSA). The hypothesis was that there would be comparable kinematics between the two groups. METHODS: A cohort of 16 randomly selected patients (8 MC Persona Zimmer, 8 UC Persona Zimmer) was evaluated through dynamic radiostereometric analysis (RSA) at a minimum of 9 months after TKA, during the execution of a sit-to-stand. The antero-posterior (AP) translation of the femoral component and the AP translation of the low point of medial and lateral femoral compartments were compared through Student's t test (p < 0.05). RESULTS: Both groups showed a medial pivot behavior, with a significantly greater anterior translation of the Low Point of the lateral compartment with respect to the medial compartment (MC medial range: 2.4 ± 2.4 mm; MC lateral range: 7.7 ± 3.0 mm; p < 0.001 - UC medial range: 3.3 ± 3.3 mm; UC lateral range: 8.0 ± 3.2 mm; p < 0.001). A statistically significant greater degree of flexion was clinically recorded at follow-up visit in the MC group respect to the UC group (126° vs 101°-p = 0.003). CONCLUSION: The present study did not show difference in the medial pivot behavior between ultra-congruent and medial-congruent total knee arthroplasty when implanted with mechanical alignment; however, the MC group demonstrated a greater degree of flexion. The MC design examined is a valid alternative to the UC design, allowing to achieve a screw-home movement restoration combined with a high flexion. LEVEL OF EVIDENCE: IV.

Does Implant Design Influence Failure Rate of Lateral Unicompartmental Knee Arthroplasty? A Meta-Analysis.

BACKGROUND: Lateral unicompartmental knee arthroplasty (UKA) is a viable solution for isolated lateral compartment arthritis. Several prosthetic designs are available such as fixed-bearing metal-backed (FB M-B), fixed-bearing all-polyethylene (FB A-P), and mobile-bearing metal-backed (MB M-B) implants. The purpose of this meta-analysis is to compare failure rates of different prosthetic designs. METHODS: Preferred Reporting Items for Systematic Reviews and Meta-Analyses systematic review was conducted using 4 databases (MEDLINE, EMBASE, Cochrane, and PubMed) to identify all studies that investigate outcomes of lateral UKA. Twenty-one studies met the inclusion criteria, and failure rates were compared by implant type and follow-up time separately in order to assess potential confounding factors. Two separate analyses have been performed among different implant designs (FB M-B vs FB A-P vs MB M-B) and different follow-ups (<5 years, between 5 and 10 years, >10 years). RESULTS: The failure rate of FB M-B lateral UKA was significantly lower compared to other lateral UKA designs present in the market (0.8% vs 8.6% and 7.1% for FB M-B, FB A-P, and MB M-B, respectively). No significative difference among groups has been detected when comparing all implants with regard to follow-up time. CONCLUSION: Considering actual evidence, for a surgeon approaching lateral UKA, the FB M-B design is preferable, given the lower failure rates and subsequently a longer implant survivorship.

Over-constrained kinematic of the medial compartment leads to lower clinical outcomes after total knee arthroplasty.

PURPOSE: To investigate if postoperative clinical outcomes correlate with specific kinematic patterns after total knee arthroplasty (TKA) surgery. The hypothesis was that the group of patients with higher clinical outcomes would have shown postoperative medial pivot kinematics, while the group of patients with lower clinical outcomes would have not. METHODS: 52 patients undergoing TKA surgery were prospectively evaluated at least a year of follow-up (13.5 ± 6.8 months) through clinical and functional Knee Society Score (KSS), and kinematically through dynamic radiostereometric analysis (RSA) during a sit-to-stand motor task. Patients received posterior-stabilized TKA design. Based on the result of the KSS, patients were divided into two groups: "KSS > 70 group", patients with a good-to-excellent score (93.1 ± 6.8 points, n = 44); "KSS < 70 group", patients with a fair-to-poor score (53.3 ± 18.3 points, n = 8). The anteroposterior (AP) low point (lowest femorotibial contact points) translation of medial and lateral femoral compartments was compared through Student's t test (p < 0.05). RESULTS: Low point AP translation of the medial compartment was significantly lower (p < 0.05) than the lateral one in both the KSS > 70 (6.1 mm ± 4.4 mm vs 10.7 mm ± 4.6 mm) and the KSS < 70 groups (2.7 mm ± 3.5 mm vs 11.0 mm ± 5.6 mm). Furthermore, the AP translation of the lateral femoral compartment was not significantly different (p > 0.05) between the two groups, while the AP translation of the medial femoral compartment was significantly higher for the KSS > 70 group (p = 0.0442). CONCLUSION: In the group of patients with a postoperative KSS < 70, the medial compartment translation was almost one-fourth of the lateral one. Surgeons should be aware that an over-constrained kinematic of the medial compartment might lead to lower clinical outcomes. LEVEL OF EVIDENCE: II.

In vivo kinematic comparison between an ultra-congruent and a posterior-stabilized total knee arthroplasty design by RSA.

PURPOSE: The aim of the present study was to compare the in vivo under weight-bearing kinematic behavior of a posterior-stabilized (PS) and an ultra-congruent (UC) total knee arthroplasty (TKA) model during a sit-to-stand motor task, a common activity of daily life. METHODS: A cohort of 16 randomly selected patients (8 PS Persona Zimmer, 8 UC Persona Zimmer) was evaluated through dynamic radiostereometric analysis (RSA) at a minimum of 9 months after TKA, during the execution of a sit-to-stand. The anteroposterior (AP) translation of the femoral component and the AP translation of the low point of medial and lateral femoral compartments were compared through Student's t test (p < 0.05). RESULTS: A significantly greater anterior translation of the femoral component was found for the PS group compared to the UC group. The flexion interval where statistical significance was found was between 30° and 0° (p = 0.017). Both groups showed a significantly greater anterior translation of the low point of the lateral compartment with respect to the medial one (PS: p = 0.012, UC: p = 0.018). This was consistent with a medial-pivot pattern. Furthermore, a significantly greater anterior translation of the medial compartment was found in the PS group compared to the UC group (p = 0.001). The same pattern was observed for the lateral compartment (p = 0.006). CONCLUSIONS: The TKA designs evaluated in the present study showed comparable in-vivo kinematics with regards to medial pivot pattern but differences in absolute AP translation. Specifically, the UC design showed greater AP stability than the PS design. This finding could be positive in terms of implant stability, but negative in terms of premature polyethylene wear and thus implant failure. This remains to be verified in studies with a larger sample size and longer follow-up. LEVEL OF EVIDENCE: IV.

Weight bearing versus conventional CT for the measurement of patellar alignment and stability in patients after surgical treatment for patellar recurrent dislocation.

PURPOSE: To compare weight-bearing cone-beam computer tomography (CBCT) and conventional computer tomography (CT)-based measurements of patellofemoral alignment and stability in patients surgically treated for recurrent patellar dislocation. These scans implied respectively single-leg up-right posture, the knee flexed, and lower limb muscles activation, versus supine position with the knee extended. METHODS: A total of 17 patients (11 males/6 females) after surgical reconstruction with fascia lata allograft for recurrent patellofemoral dislocation were analyzed at 60-month follow-up. Tilt and congruence angles and tibial tuberosity-trochlear groove (TT-TG) offset were measured on images obtained from CBCT and conventional CT scans by three independent and expert radiologists. Paired t tests were performed to compare measurements obtained from the two scans. Inter-rater reliability was assessed using a two-way mixed-effects model intra-class correlation coefficient (ICC). RESULTS: Only TT-TG offset was found significantly smaller (p < 0.001) in CBCT (mean 9.9 ± 5.3 mm) than in conventional CT (mean 15.9 ± 4.9 mm) scans. ICC for tilt and congruence angles and for TT-TG offset ranged between 0.80-0.94 with measurements in CBCT scans, between 0.52 and0.78 in conventional CT. CONCLUSION: In patients surgically treated for recurrent patellar dislocation, TT-TG offset was found overestimated with conventional CT. All measurements of patellofemoral stability and alignment were found more consistent when obtained with weight-bearing CBCT compared to conventional CT.

A professional athlete functionally active 10 years after an arthroscopic lateral collagen meniscus implant.

The case of a former high-level professional soccer player is presented at 10-year follow-up after arthroscopically implanted lateral Collagen Meniscus Implant (CMI). The patient achieved a full-knee functional recovery and a complete sport resumption to the same pre-injury level for several soccer seasons and he is still performing semi-professional soccer activity (minor league) 10 years after surgery.Level of evidence Case Report. Level IV.

In vivo femorotibial kinematics of medial-stabilized total knee arthroplasty correlates to post-operative clinical outcomes.

PURPOSE: To evaluate if there was a correlation between in vivo kinematics of a medial-stabilized (MS) total knee arthroplasty (TKA) and post-operative clinical scores. We hypothesized that (1) a MS-TKA would produce a medial pivot movement and that (2) this specific pattern would be correlated with higher clinical scores. METHODS: 18 patients were evaluated through clinical and functional scores evaluation (Knee Society Score clinical and functional, Womac, Oxford), and kinematically through dynamic radiostereometric analysis (RSA) at 9 months after MS-TKA, during the execution of a sit-to-stand and a lunge motor task. The anteroposterior (AP) Low Point translation of medial and lateral femoral compartments was compared through Student's t test (p < 0.05). A correlation analysis between scores and kinematics was performed through the Pearson's correlation coefficient r. RESULTS: A significantly greater (p < 0.0001) anterior translation of the lateral compartment with respect to the medial one was found in both sit-to-stand (medial 2.9 mm ± 0.7 mm, lateral 7.1 mm ± 0.6 mm) and lunge (medial 5.3 mm ± 0.9 mm, lateral 10.9 mm ± 0.7 mm) motor tasks, thus resulting in a medial pivot pattern in about 70% of patients. Significant positive correlation in sit-to-stand was found between the peak of AP translation in the lateral compartment and clinical scores (r = 0.59 for Knee Society Score clinical and r = 0.61 for Oxford). Moreover, we found that the higher peak of AP translation of the medial compartment correlated with lower clinical scores (r = - 0.55 for Knee Society Score clinical, r = - 0.61 for Womac and r = - 0.53 for Oxford) in the lunge. A negative correlation was found between Knee Society Score clinical and VV laxity during sit-to-stand (r = - 0.56) and peak of external rotation in the lunge motor task (r = - 0.66). CONCLUSIONS: The MS-TKA investigated produced in vivo a medial pivot movement in about 70% of patients in both examined motor tasks. There was a correlation between the presence of medial pivot and higher post-operative scores. LEVEL OF EVIDENCE: IV.

Good results are reported at 60-month follow-up after medial patello-femoral ligament reconstruction with fascia lata allograft for recurrent patellar dislocation.

PURPOSE: The aim of this study was to evaluate the efficacy of a new minimally invasive surgical technique for the reconstruction of the medial patellofemoral ligament (MPFL) with fascia lata allograft at 60-month minimum follow-up. METHODS: Nineteen consecutive patients with chronic recurrent patellar dislocation were treated with MPFL reconstruction (53% isolate procedure, 47% in combination with other treatments). Seventeen patients (11 males/6 females) were available at 60-month follow-up and were clinically evaluated with validated scores. New episodes of patellar dislocation were considered failures. Radiographic and CT scan evaluation were executed preoperatively and at 60-month follow-up. RESULTS: All clinical scores improved from preoperative assessment to 24-month and 60-month follow-up (p < 0.001). Kujala score increased from 61.2 ± 18.1 to 86.7 ± 8.7 and 82.1 ± 10.2; KOOS increased from 54.5 ± 19 to 86.8 ± 9.6 and 84.3 ± 7.6; VAS for pain decreased from 5.1 ± 2.2 to 2.4 ± 1.5 and 1.7 ± 1.2; Tegner score increased from 3 [2-4] to 5 [3-8] and 5 [3-9], respectively. Objective IKDC improved too. No significant improvements between the 24-month and 60-month follow-up evaluations were recorded. Anterior knee pain was reported in two patients (12%). Treatment failure, a new episode of patellar dislocation 25 months after the surgery, was observed in one patient (6%). Radiographic OA changes were not statistically significant between preop and 60-month follow-up. Tuberosity-troclear groove (TT-TG) distance and the patellar tilt angle were subjected to significant changes due to MPFL reconstruction and associated procedures. CONCLUSION: MPFL reconstruction with fascia lata allograft, alone or combined with other procedures, is a reliable treatment option for recurrent patellar dislocation with a success rate of 94% and without cartilage deterioration at 60-month follow-up. LEVEL OF EVIDENCE: IV.

Role of pulsed electromagnetic fields after joint replacements.

Although the rate of patients reporting satisfaction is generally high after joint replacement surgery, up to 23% after total hip replacement and 34% after total knee arthroplasty of treated subjects report discomfort or pain 1 year after surgery. Moreover, chronic or subacute inflammation is reported in some cases even a long time after surgery. Another open and debated issue in prosthetic surgery is implant survivorship, especially when related to good prosthesis bone ingrowth. Pulsed Electro Magnetic Fields (PEMFs) treatment, although initially recommended after total joint replacement to promote bone ingrowth and to reduce inflammation and pain, is not currently part of usual clinical practice. The purpose of this review was to analyze existing literature on PEMFs effects in joint replacement surgery and to report results of clinical studies and current indications. We selected all currently available prospective studies or RCT on the use of PEMFs in total joint replacement with the purpose of investigating effects of PEMFs on recovery, pain relief and patients' satisfaction following hip, knee or shoulder arthroplasty. All the studies analyzed reported no adverse effects, and good patient compliance to the treatment. The available literature shows that early control of joint inflammation process in the first days after surgery through the use of PEMFs should be considered an effective completion of the surgical procedure to improve the patient's functional recovery.