Morphological and Molecular Evaluation of the Tissue Repair following Nasal Septum Biopsy in a Sheep Model.

OBJECTIVE: Nasal septal pathologies requiring surgical intervention are common in the population. Additionally, nasal chondrocytes are becoming an important cell source in cartilage tissue engineering strategies for the repair of articular cartilage lesions. These procedures damage the nasal septal cartilage whose healing potential is limited due to its avascular, aneural, and alymphatic nature. Despite the high incidence of various surgical interventions that affect septum cartilage, limited nasal cartilage repair characterizations have been performed to date. METHODS: To evaluate the healing of the nasal septum cartilage perforation, a septal biopsy was performed in 14 sheep. Two and 6 months later, the tissue formed on the place of perforation was explanted and compared with the native tissue. Tissue morphology, protein and gene expression of explanted tissue was determined using histological, immunohistochemical and real-time quantitative polymerase chain reaction analysis. RESULTS: Tissue formed on the defect site, 2 and 6 months after the biopsy was characterized as mostly connective tissue with the presence of fibroblastic cells. This newly formed tissue contained no glycosaminoglycans and collagen type II but was positively stained for collagen type I. Cartilage-specific genes COL2, AGG, and COMP were significantly decreased in 2- and 6-month samples compared with the native nasal cartilage. Levels of COL1, COL4, and CRABP1 genes specific for perichondrium and connective tissue were higher in both test group samples in comparison with native cartilage. CONCLUSIONS: Newly formed tissue was not cartilage but rather fibrous tissue suggesting the role of perichondrium and mucosa in tissue repair after nasal septum injury.

A novel autologous bone graft substitute containing rhBMP6 in autologous blood coagulum with synthetic ceramics for reconstruction of a large humerus segmental gunshot defect in a dog: The first veterinary patient to receive a novel osteoinductive therapy.

BACKGROUND: Management of large segmental defects is one of the most challenging issues in bone repair biology. Autologous bone graft substitute (ABGS) containing rhBMP6 within autologous blood coagulum (ABC) with synthetic ceramics is a novel biocompatible therapeutic solution for bone regeneration. CASE PRESENTATION: A 2-year old dog was brought to the veterinary clinics due to pain and bleeding from the right front leg after being unintendedly hit by a gunshot. Radiological examination revealed a large, 3 cm long multisegmental defect of the humerus on the right front leg with a loss of anatomical structure in the distal portion of the bone. The defect was treated surgically and an external fixator was inserted to ensure immobilization. Complete lack of bone formation 3 months following surgery required a full reconstruction of the defect site with a novel ABGS (rhBMP6 in ABC with ceramic particles) to avoid front leg amputation. The healing was then followed for the next 16 months. The callus formation was observed on x-ray images 2 months following ABGS implantation. The bone segments progressively fused together leading to the defect rebridgment allowing removal of the external fixator by 4 months after the reconstruction surgery. At the end of the observation period, the function of the leg was almost fully restored while analyses of the humeral CT sections revealed restoration and cortices rebridgment with a renewal of uniform medullary canal including structural reconstruction of the distal humerus. CONCLUSION: This large humeral gunshot segmental defect of the front leg in a dog was saved from amputation via inducing bone regeneration using a novel ABGS osteoinductive device containing BMP6 in ABC.

Hydrogel composite scaffolds with an attenuated immunogenicity component for bone tissue engineering applications.

Xenogeneic bones are potential templates for bone regeneration. In this study, decellularized porcine bone powder with attenuated immunogenicity was incorporated into a photocurable hydrogel, gelatin methacryloyl (GelMA), to obtain scaffolds with good mechanical properties for bone tissue engineering. The decellularized bone powder (DCB)-GelMA hybrid scaffolds had higher compressive strength and stiffness values when the DCB content was increased. In vitro evaluations revealed the biocompatibility of these scaffolds. The scaffolds could induce human bone marrow mesenchymal stem cells (hMSCs) to undergo osteogenic differentiation even in the absence of an induction medium. The efficiency of the scaffolds for bone regeneration applications was further evaluated using an in vivo cranial bone defect model in rats. Micro-CT images showed that the hybrid scaffolds with 20% DCB content had the best effect in promoting new bone regeneration. Thus, it was concluded that the DCB-GelMA hybrid scaffolds have high potential in bone tissue engineering applications.

Evaluation of synthetic ceramics as compression resistant matrix to promote osteogenesis of autologous blood coagulum containing recombinant human bone morphogenetic protein 6 in rabbit posterolateral lumbar fusion model.

Posterolateral lumbar fusion (PLF) is a commonly performed surgical procedure for the treatment of pathological conditions of the lumbosacral spine. In the present study, we evaluated an autologous bone graft substitute (ABGS) containing rhBMP6 in autologous blood coagulum (ABC) and synthetic ceramics used as compression resistant matrix (CRM) in the rabbit PLF model. In the pilot PLF rabbit experiment, we tested four different CRMs (BCP 500-1700 µm, BCP 1700-2500 µm and two different TCP in the form of slabs) which were selected based on achieving uniform ABC distribution. Next, ABGS implants composed of 2.5 mL ABC with 0.5 g ceramic particles (TCP or BCP (TCP/HA 80/20) of particle size 500-1700 µm) and 125 µg rhBMP6 (added to blood or lyophilized on ceramics) were placed bilaterally between transverse processes of the lumbar vertebrae (L5-L6) following exposition and decortication in 12 New Zealand White Rabbits observed for 7 weeks following surgery. Spinal fusion outcome was analysed by µCT, palpatory segmental mobility testing and selected specimens were either tested biomechanically (three-point bending test) and/or processed histologically. The total fusion success rate was 90.9% by both µCT analyses and by palpatory segmental mobility testing. The volume of newly formed bone between experimental groups with TCP or BCP ceramics and the different method of rhBMP6 application was comparable. The newly formed bone and ceramic particles integrated with the transverse processes on histological sections resulting in superior biomechanical properties. The results were retrospectively found superior to allograft devitalized mineralized bone as a CRM as reported previously in rabbit PLF. Overall, this novel ABGS containing rhBMP6, ABC and the specific 500-1700 µm synthetic ceramic particles supported new bone formation for the first time and successfully promoted posterolateral lumbar fusion in rabbits.

Autologous blood coagulum containing rhBMP6 induces new bone formation to promote anterior lumbar interbody fusion (ALIF) and posterolateral lumbar fusion (PLF) of spine in sheep.

In the present study, we evaluated an autologous bone graft substitute (ABGS) composed of recombinant human BMP6 (rhBMP6) dispersed within autologous blood coagulum (ABC) used as a physiological carrier for new bone formation in spine fusion sheep models. The application of ABGS included cervical cage for use in the anterior lumbar interbody fusion (ALIF), while for the posterolateral lumbar fusion (PLF) sheep model allograft devitalized bone particles (ALLO) were applied with and without use of instrumentation. In the ALIF model, ABGS (rhBMP6/ABC/cage) implants fused significantly when placed in between the L4-L5 vertebrae as compared to control (ABC/cage) which appears to have a fibrocartilaginous gap, as examined by histology and micro CT analysis at 16 weeks following surgery. In the PLF model, ABGS implants with or without ALLO showed a complete fusion when placed ectopically in the gutter bilaterally between two decorticated L4-L5 transverse processes at a success rate of 88% without instrumentation and at 80% with instrumentation; however the bone volume was 50% lower in the instrumentation group than without, as examined by histology, radiographs, micro CT analyses and biomechanical testing at 27 weeks following surgery. The newly formed bone was uniform within ABGS implants resulting in a biomechanically competent and histologically qualified fusion with an optimum dose in the range of 100 µg rhBMP6 per mL ABC, while in the implants that contained ALLO, the mineralized bone particles were substituted by the newly formed remodeling bone via creeping substitution. These findings demonstrate for the first time that ABGS (rhBMP6/ABC) without and with ALLO particles induced a robust bone formation with a successful fusion in sheep models of ALIF and PLF, and that autologous blood coagulum (ABC) can serve as a preferred physiological native carrier to induce new bone at low doses of rhBMP6 and to achieve a successful spinal fusion.

Bioreactor-manufactured cartilage grafts repair acute and chronic osteochondral defects in large animal studies.

OBJECTIVES: Bioreactor-based production systems have the potential to overcome limitations associated with conventional tissue engineering manufacturing methods, facilitating regulatory compliant and cost-effective production of engineered grafts for widespread clinical use. In this work, we established a bioreactor-based manufacturing system for the production of cartilage grafts. MATERIALS & METHODS: All bioprocesses, from cartilage biopsy digestion through the generation of engineered grafts, were performed in our bioreactor-based manufacturing system. All bioreactor technologies and cartilage tissue engineering bioprocesses were transferred to an independent GMP facility, where engineered grafts were manufactured for two large animal studies. RESULTS: The results of these studies demonstrate the safety and feasibility of the bioreactor-based manufacturing approach. Moreover, grafts produced in the manufacturing system were first shown to accelerate the repair of acute osteochondral defects, compared to cell-free scaffold implants. We then demonstrated that grafts produced in the system also facilitated faster repair in a more clinically relevant chronic defect model. Our data also suggested that bioreactor-manufactured grafts may result in a more robust repair in the longer term. CONCLUSION: By demonstrating the safety and efficacy of bioreactor-generated grafts in two large animal models, this work represents a pivotal step towards implementing the bioreactor-based manufacturing system for the production of human cartilage grafts for clinical applications. Read the Editorial for this article on doi:10.1111/cpr.12625.

Recombinant Human Bone Morphogenetic Protein 6 Delivered Within Autologous Blood Coagulum Restores Critical Size Segmental Defects of Ulna in Rabbits.

BMP2 and BMP7, which use bovine Achilles tendon-derived absorbable collagen sponge and bovine bone collagen as scaffold, respectively, have been approved as bone graft substitutes for orthopedic and dental indications. Here, we describe an osteoinductive autologous bone graft substitute (ABGS) that contains recombinant human BMP6 (rhBMP6) dispersed within autologous blood coagulum (ABC) scaffold. The ABGS is created as an injectable or implantable coagulum gel with rhBMP6 binding tightly to plasma proteins within fibrin meshwork, as examined by dot-blot assays, and is released slowly as an intact protein over 6 to 8 days, as assessed by ELISA. The biological activity of ABGS was examined in vivo in rats (Rattus norvegicus) and rabbits (Oryctolagus cuniculus). In a rat subcutaneous implant assay, ABGS induced endochondral bone formation, as observed by histology and micro-CT analyses. In the rabbit ulna segmental defect model, a reproducible and robust bone formation with complete bridging and restoration of the defect was observed, which is dose dependent, as determined by radiographs, micro-CT, and histological analyses. In ABGS, ABC scaffold provides a permissive environment for bone induction and contributes to the use of lower doses of rhBMP6 compared with BMP7 in bovine bone collagen as scaffold. The newly formed bone undergoes remodeling and establishes cortices uniformly that is restricted to implant site by bridging with host bone. In summary, ABC carrier containing rhBMP6 may serve as an osteoinductive autologous bone graft substitute for several orthopedic applications that include delayed and nonunion fractures, anterior and posterior lumbar interbody fusion, trauma, and nonunions associated with neurofibromatosis type I.

Metal projectile injuries in cats: review of 65 cases (2012-2014).

OBJECTIVES: The objective of this study was to compare the prevalence of different types of injuries caused by various types of projectiles among urban, suburban and rural cats of different ages in order to predict the type of injury sustained. METHODS: For the period 1 January 2012 to 30 April 2014, the medical records of cats with metal projectile injuries (PIs) were searched from the archive of the university's small animal diagnostic imaging centre. Age, sex, owner address, admission during a weekend or on a working day, month of admission, projectile position (head and neck; thoracic region; abdominal region, including lumbosacral spine; forelimbs; and hindlimbs, including tail), number of projectiles, presence of a wound and fracture related to the projectile, and the type of projectile were recorded for each cat. RESULTS: Sixty-five cats with PIs were admitted during the defined period. In 38.5% of cats the projectiles found upon radiography were incidental findings. The frequency of PIs peaked in March. Airgun projectiles were found in 80.0% of the cats. PIs in two or more body regions were found in 29.2% of the cats. Among the cats that had only been shot in one body region, the projectile was most frequently found in the abdominal region, including the lumbosacral spine (41.3%). CONCLUSIONS AND RELEVANCE: These results might prompt clinicians to evaluate closely and screen for feline PIs in emergency situations.

Regional intravenous gentamicin administration for treatment of postoperative tarso-metatarsal infection in a dog--a case report.

The regional intravenous antibiotic administration has been used to achieve high local concentrations of antibiotics into the extremities. The goal of this case report was to describe a known, but not often used technique of local administration of antibiotics for treatment of acute soft tissue, joint or bone infection in a dog, which suffered from chronic renal failure. In a seven years old Great Dane tarso-metatarsal arthrodesis was performed and three days after surgery infection was obvious. Gentamicin-sensitive E. co i was found by antibiogram. A tourniquet was tightened on the affected limb and gentamicin was administered in a dosage of 0,5 mg/kg every twelve hours via an intravenous catheter placed in the saphenous vein. The therapy lasted for ten days and wound healing was progressive. Regional intravenous gentamicin administration was very effective in treating distal extremity infection.

Regeneration of the skeleton by recombinant human bone morphogenetic proteins.

Recombinant human bone morphogenetic proteins (rhBMPs) have past a long journey in human orthopaedic surgery during the last 15 years. From the first reports of the use of rhBMPs in hostile environments such as critically-sized bone defects, avascular femoral head necrosis, unstable thoracolumbar vertebral fractures, instability between the atlas and axis due to rheumatoid arthritis; over the use for nonunions of long bones and the scaphoid, reconstructive and revision surgeries of the hip, acute fractures, allograft nonunions, congenital pseudarthrosis, and various approaches of lumbar and cervical spine fusions, rhBMPs overgrow to a safe and reliable device in the treatment of open tibial shaft fractures, nonunions of long bone fractures, anterior lumbar interbody fusion and revision posterolateral lumbar fusions. Systematic review of the published literature of rhBMPs is presented.

Requirement of a bone morphogenetic protein for the maintenance and stimulation of osteoblast differentiation.

The requirement of a bone morphogenetic protein for the maintenance and stimulation of an osteoblast phenotype was examined using mouse MC3T3-E1 cell cultures. Cells expressed BMP-4 mRNA, which correlated with the stimulation of the osteoblast phenotype. The addition of a BMP-4 specific antibody reduced bone nodules, suggesting that BMP-4 is required for the osteogenic activity of osteoblasts in an autocrine manner. Exogenously added BMP-7 gradually decreased the expression of BMP-4 with a concurrent stimulation of the osteoblast phenotype. Exogenous BMP-7 can therefore substitute for endogenously produced BMP-4 acting as a paracrine factor on osteoblasts. The addition of 17beta estradiol decreased BMP-4 expression but initiated synthesis of BMP-6 mRNA, an endocrine signal for osteoblasts, which also substituted for the lack of endogenous BMP-4, as evidenced by normal bone nodule formation. The addition of dexamethasone and parathyroid hormone did not affect the BMP-4 expression but induced transcripts for BMP-2 and BMP-3, respectively, suggesting that their effects on bone can be in part achieved via the BMP signaling. These experiments support the requirement of a BMP for osteoblast differentiation and function, demonstrating for the first time that a BMP can functionally substitute for another BMP in an autocrine/paracrine manner or mediate a response to an endocrine action on osteoblasts.