Single Nucleotide Polymorphisms in RUNX2 and BMP2 contributes to different vertical facial profile.

The vertical facial profile is a crucial factor for facial harmony with significant implications for both aesthetic satisfaction and orthodontic treatment planning. However, the role of single nucleotide polymorphisms (SNPs) in the development of vertical facial proportions is still poorly understood. This study aimed to investigate the potential impact of some SNPs in genes associated with craniofacial bone development on the establishment of different vertical facial profiles. Vertical facial profiles were assessed by two senior orthodontists through pre-treatment digital lateral cephalograms. The vertical facial profile type was determined by recommended measurement according to the American Board of Orthodontics. Healthy orthodontic patients were divided into the following groups: "Normodivergent" (control group), "Hyperdivergent" and "Hypodivergent". Patients with a history of orthodontic or facial surgical intervention were excluded. Genomic DNA extracted from saliva samples was used for the genotyping of 7 SNPs in RUNX2, BMP2, BMP4 and SMAD6 genes using real-time polymerase chain reactions (PCR). The genotype distribution between groups was evaluated by uni- and multivariate analysis adjusted by age (alpha = 5%). A total of 272 patients were included, 158 (58.1%) were "Normodivergent", 68 (25.0%) were "Hyperdivergent", and 46 (16.9%) were "Hypodivergent". The SNPs rs1200425 (RUNX2) and rs1005464 (BMP2) were associated with a hyperdivergent vertical profile in uni- and multivariate analysis (p-value < 0.05). Synergistic effect was observed when evaluating both SNPs rs1200425- rs1005464 simultaneously (Prevalence Ratio = 4.0; 95% Confidence Interval = 1.2-13.4; p-value = 0.022). In conclusion, this study supports a link between genetic factors and the establishment of vertical facial profiles. SNPs in RUNX2 and BMP2 genes were identified as potential contributors to hyperdivergent facial profiles.

Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study.

OBJECTIVE: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. METHODS: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. RESULTS: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. CONCLUSIONS: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

Calcification patterns and morphology of Sella turcica are related to anteroposterior skeletal malocclusions: A cross-sectional study.

BACKGROUND: The sphenoid bone is an irregular, unpaired, symmetrical bone located in the middle of the anterior skull and is involved in craniofacial growth and development. Since the morphology of Sella turcica (ST) is associated with different craniofacial patterns, this study aimed to investigate if there is a correlation between ST morphology on the one hand and sagittal craniofacial patterns on the other hand. METHODS: This study was conducted with a convenience sample that included Brazilian individuals undergoing orthodontic treatment. Lateral cephalograms were used to evaluate the calcification pattern and morphology of ST, as well as skeletal class by analyzing the ANB angle. Pearson's chi-square test with Bonferroni post-hoc test was performed to evaluate the association between ST calcification pattern and morphology, and anteroposterior skeletal malocclusion. The established significance level was 0.05. RESULTS: The study collective was comprised of 305 orthodontic patients (178 (58.4 %) female, 127 (41.6 %) male), who had a mean age of 23.2 (±10.6) years. 131 participants (42.9 %) presented skeletal class I, 142 (46.6%) skeletal Class II, and 32 (10.5%) had a skeletal class III. The degree of prognathism of the mandible showed a homogenous distribution within the study collective (91 (29.9 %) orthognathic, 100 (32.9 %) retrognathic, 113 (37.2 %) prognathic mandible). Concerning the maxilla, 92 (30.2%) individuals presented an orthognathic upper jaw, whereas 60 (19.7%) showed maxillary retrognathism and 153 (50.2%) maxillary prognathism. Compared to patients with skeletal class I, skeletal class III individuals presented significantly more hypertrophic posterior clinoid process (p<0.007) and pyramidal shape of the dorsum of the ST (p<0.038). CONCLUSIONS: Our results suggest that the hypertrophic posterior clinoid process and pyramidal shape of the ST dorsum are more prevalent in individuals with skeletal class III malocclusion.

Association of defects of enamel with polymorphisms in the vitamin D receptor and parathyroid hormone genes

Abstract This cross-sectional study aimed to investigate the association between developmental defects of enamel (DDE) and single nucleotide polymorphisms (SNPs) in the genes encoding the vitamin D receptor (VDR) and parathyroid hormone (PTH). Orthodontic patients receiving treatment at a dental school were selected through convenience sampling. Intra-oral photographs were used to assess DDE, which were classified according to the criteria proposed by Ghanim et al. (2015) by a single calibrated examiner (Kappa>0.80). Enamel hypoplasia, molar-incisor hypomineralization (MIH), hypomimineralized second primary molar (HSPM), and non-MIH/HSPM demarcated opacities were considered for the analysis. Genomic DNA was extracted from buccal cells. The SNPs in VDR (rs7975232) and PHT (rs694, rs6256, and rs307247) were genotyped using real-time polymerase chain reactions (PCR). Statistical analyses were performed using the PLINK software (version 1.03, designed by Shaun Purcell, EUA). Chi-square or Fisher's exact tests were performed at a significance level of 5%. Ninety-one (n=91) patients (49 females and 42 males) (mean age of 14.1±5.8 years) were included. The frequency of DDE was 38.5% (35 patients). Genotype distributions were in Hardy-Weinberg equilibrium. No significant statistical association was found between DDE and the SNPs evaluated. A borderline association (p=0.09) was observed between DDE and the CC haplotype for SNP rs7975232 in VDR. In conclusion, the selected SNPs in VDR and PTH genes were not associated with DDE in the studied samples.

Resumo Este estudo transversal teve como objetivo investigar a associação entre defeitos de desenvolvimento do esmalte (DDE) e polimorfismos de nucleotídeo único (SNPs) nos genes que codificam o receptor da vitamina D (VDR) e o hormônio da paratireoide (PTH). Pacientes ortodônticos em tratamento em uma escola Odontologia foram selecionados por amostragem de conveniência. Os DDEs foram avaliados e classificados por um examinador calibrado (Kappa>0,80) através de fotografias intraorais de acordo com os critérios propostos por Ghanim et al. (2015). Os tipos de DDE considerados para análise foram: hipoplasia de esmalte, hipomineralização molar-incisivo (HMI), hipomineralização de segundos molares decíduos (HSMD) e opacidades demarcadas não-HMI/HSMD. O DNA gnômico foi extraído de células bucais. Os SNPs em VDR (rs7975232) e PTH (rs694, rs6256 e rs307247) foram genotipados por PCR em tempo real. As análises estatísticas foram realizadas utilizando o software PLINK (versão 1.03, concebido por Shaun Purcell, EUA). Foram feitos teste de qui-quadrado e teste exato de Fisher com um nível de significância de 5%. Foram incluídos noventa e um (n=91) pacientes (49 do sexo feminino e 42 do sexo masculino) (idade média de 14,1±5,8 anos). A frequência de DDE foi de 38,5% (35 pacientes). As distribuições genotípicas estavam em equilíbrio de Hardy-Weinberg. Não foi encontrada associação estatisticamente significante entre os DDEs e os SNPs avaliados. Foi observada uma associação limítrofe (p=0,09) entre a DDE e o haplótipo CC para o SNP rs7975232 no VDR. Em conclusão, os SNPs seleccionados nos genes VDR e PTH não foram associados à DDE nas amostras estudadas.

Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study

ABSTRACT Objective: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. Methods: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. Results: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. Conclusions: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

RESUMO Objetivo: O objetivo deste estudo foi comparar o torque de inserção (TI), a resistência flexural (RF) e as alterações de superfície em mini-implantes ortodônticos de aço inoxidável (MIs-Ai) e de liga de titânio (MIs-Ti). Métodos: Vinte e quatro MIs (2 x 10 mm; MIs-Ai, n = 12; MIs-Ti, n = 12) foram inseridos em blocos de osso artificial de densidades de 20 lb/ft3 (20 PCF) e 40 lb/ft3 (40 PCF). O torque máximo de inserção foi registrado por meio de um torquímetro digital. A resistência flexural foi avaliada nas deflexões de 2, 3 e 4 mm. Topografia de superfície e composição química dos MIs foram avaliadas por Microscopia Eletrônica de Varredura (MEV) e Espectroscopia de Energia Dispersiva de Raios X (EDS). Modelos lineares gerais e mistos foram utilizados para avaliar o efeito do tipo de MI, da densidade óssea e da deflexão nos desfechos avaliados. Resultados: O TI dos MIs-Ti foi 1,1 Ncm maior do que o obtido para os MIs-Ai (P = 0,018). O TI para MIs inseridos em blocos de teste de 40 PCF foi 5,4 Ncm maior do que para aqueles inseridos em blocos de teste 20 PCF (p < 0,001). MIs-Ai inseridos em osso de maior densidade (40 PCF) apresentaram resistência flexural significativamente maior do que outros grupos, em deflexões de 2 mm (98,7 ± 5,1 Ncm), 3 mm (112,0 ± 3,9 Ncm) e 4 mm (120,0 ± 3,4 Ncm) (p < 0,001). A MEV evidenciou fraturas nos MIs-Ti. A EDS revelou incorporação de 18% de C e 2,06% de O nos MIs-Ai e 3,91% de C nos MIs-Ti, ambos submetidos a testes mecânicos. Conclusões: Com base nos resultados desse estudo in vitro, os MIs-Ai aparentam oferecer adequada estabilidade e maior resistência mecânica, em comparação aos MIs-Ti, quando inseridos em osso de maior densidade.

Investigating the association between dental age and polymorphisms in genes encoding estrogen receptors.

BACKGROUND: Genetic polymorphisms have been shown to influence several physiological traits, including dental and craniofacial characteristics. Understanding the clinical relevance of genetic polymorphisms in dental practice is crucial to personalize treatment plans and improve treatment outcomes. OBJECTIVE: to evaluate the association between dental age and genetic polymorphisms in genes encoding estrogen receptors alpha and beta (ESR1 and ESR2, respectively) in a sample of Brazilian children. METHODOLOGY: This retrospective cross-sectional study was performed with children undergoing orthodontic treatment. Patients with syndromes, congenital anomalies, craniofacial deformities, under hormonal or systemic treatment, and with a previous history of facial trauma were excluded. Panoramic radiographs were used to assess dental age according to the Demirjian, Goldstein, and Tanner method. A delta [dental age-chronological age (DA-CA)] was obtained, which shows whether the patient tends to have a normal, delayed (negative values), or advanced (positive values) dental age. DNA isolated from buccal cells was used to genotype four genetic polymorphisms: rs9340799 (A>G) and rs2234693 (C>T), located in ESR1; and rs1256049 (C>T) and rs4986938 (C>T), located in ESR2. A statistical analysis was performed and values of p<0.05 indicated statistical difference. RESULTS: A total of 79 patients were included, 44 (55.70%) girls and 35 (44.30%) boys. The Demirjian, Goldstein, and Tanner method, in general, overestimated patients' age by 0.75 years. There was no difference in the delta of dental age between the sexes (p>0.05). Genetic polymorphisms in ESR1 and ESR2 were not associated with dental age (p>0.05). CONCLUSION: The studied genetic polymorphisms in ESR1 and ESR2 were not associated with dental age in Brazilian children.

Testosterone suppression impacts craniofacial growth structures during puberty : An animal study.

AIM: Hormones play a crucial role in growth development; however, the impact of testosterone suppression (TS) on craniofacial growth during puberty remains inconclusive. This study aimed to evaluate the impact of TS during puberty on cephalometric measurements and histological characteristics of facial growth centers. MATERIALS AND METHODS: Thirty-six heterogenic Wistar male rats were randomly allocated into experimental orchiectomy (ORX) and control (sham) groups. At an age of 23 days (prepubertal stage), orchiectomy and placebo surgery were performed. Cephalometric measurements were performed via lateral cephalograms during and after puberty. The animals were euthanized at an age of 45 days (pubertal stage) and 73 days (postpubertal stage). Histological slices of the growth centers (condyle, premaxilla, and median palatine suture) were stained with hematoxylin and eosin, and sirius red. Student's t or Mann-Whitney U tests were used to compare linear and angular cephalometric measurements across groups (α error = 5%). RESULTS: Linear and angular measurements were statistically different in ORX animals (cranial bones, maxilla, and mandible) at 45 days and 73 days. Condylar histology showed a decrease in prechondroblast differentiation and a delay of mineralization in ORX animals. Vascularization of the medium palatine suture was lower in the ORX group at 45 days. Type I and III collagen fiber synthesis was lower in the ORX groups. In the premaxillary suture, collagen fibers were better organized in the sham groups. CONCLUSIONS: Our results suggest that testosterone suppression affects craniofacial growth during puberty.

Investigating the association between dental age and polymorphisms in genes encoding estrogen receptors

Abstract Background Genetic polymorphisms have been shown to influence several physiological traits, including dental and craniofacial characteristics. Understanding the clinical relevance of genetic polymorphisms in dental practice is crucial to personalize treatment plans and improve treatment outcomes. Objective to evaluate the association between dental age and genetic polymorphisms in genes encoding estrogen receptors alpha and beta (ESR1 and ESR2, respectively) in a sample of Brazilian children. Methodology This retrospective cross-sectional study was performed with children undergoing orthodontic treatment. Patients with syndromes, congenital anomalies, craniofacial deformities, under hormonal or systemic treatment, and with a previous history of facial trauma were excluded. Panoramic radiographs were used to assess dental age according to the Demirjian, Goldstein, and Tanner method. A delta [dental age-chronological age (DA-CA)] was obtained, which shows whether the patient tends to have a normal, delayed (negative values), or advanced (positive values) dental age. DNA isolated from buccal cells was used to genotype four genetic polymorphisms: rs9340799 (A>G) and rs2234693 (C>T), located in ESR1; and rs1256049 (C>T) and rs4986938 (C>T), located in ESR2. A statistical analysis was performed and values of p<0.05 indicated statistical difference. Results A total of 79 patients were included, 44 (55.70%) girls and 35 (44.30%) boys. The Demirjian, Goldstein, and Tanner method, in general, overestimated patients' age by 0.75 years. There was no difference in the delta of dental age between the sexes (p>0.05). Genetic polymorphisms in ESR1 and ESR2 were not associated with dental age (p>0.05). Conclusion The studied genetic polymorphisms in ESR1 and ESR2 were not associated with dental age in Brazilian children.

Impact of cigarette smoke on osteogenic and osteoclast signaling in middle palatal suture.

Considering that smoking is a public health problem that has been growing among adolescents, the aim of this study was to investigate the impact of cigarette smoke on osteogenic and osteoclastogenic signaling in middle palatal suture of rats. Male Wistar rats exposed (n = 30) or not to cigarette smoke (n = 30) were used. Exposure to smoke was carried out for two daily periods of 3 minutes each, with an interval of 12 hours between exposures. After the experimental periods of 3, 7, 14 and 21 days, the animals were euthanized. The collected tissues were analyzed using light microscopy and real-time RT-PCR was performed to investigate gene expression. The data obtained were compared using the Kruskal Wallis and Dunn tests (⍺ = 5%). Morphologically, there were no significant changes in the middle palatal suture of rats exposed or not to cigarette smoke during 3, 7, 14 and 21 days (p> 0.05). On the other hand, osteoclastogenic signaling was increased in animals exposed to smoke and was characterized by a higher production of RANKL at 3 and 14 days (p <0.05), with no change in the synthesis of RANK and osteoprotegerin (p> 0.05). Interestingly, in the exposed animals, an early increase in the synthesis of osteocalcin, bone sialoprotein and osteopontin was also identified at 3 days of exposure (p <0.05), not sustained over time (p> 0.05). Cigarette smoke modulates osteogenic and osteoclastogenic signaling in the middle palatal suture of young rats, although morphological changes have not been evidenced.

Impact of cigarette smoke on osteogenic and osteoclast signaling in middle palatal suture

Abstract Considering that smoking is a public health problem that has been growing among adolescents, the aim of this study was to investigate the impact of cigarette smoke on osteogenic and osteoclastogenic signaling in middle palatal suture of rats. Male Wistar rats exposed (n = 30) or not to cigarette smoke (n = 30) were used. Exposure to smoke was carried out for two daily periods of 3 minutes each, with an interval of 12 hours between exposures. After the experimental periods of 3, 7, 14 and 21 days, the animals were euthanized. The collected tissues were analyzed using light microscopy and real-time RT-PCR was performed to investigate gene expression. The data obtained were compared using the Kruskal Wallis and Dunn tests (⍺ = 5%). Morphologically, there were no significant changes in the middle palatal suture of rats exposed or not to cigarette smoke during 3, 7, 14 and 21 days (p> 0.05). On the other hand, osteoclastogenic signaling was increased in animals exposed to smoke and was characterized by a higher production of RANKL at 3 and 14 days (p <0.05), with no change in the synthesis of RANK and osteoprotegerin (p> 0.05). Interestingly, in the exposed animals, an early increase in the synthesis of osteocalcin, bone sialoprotein and osteopontin was also identified at 3 days of exposure (p <0.05), not sustained over time (p> 0.05). Cigarette smoke modulates osteogenic and osteoclastogenic signaling in the middle palatal suture of young rats, although morphological changes have not been evidenced.

Resumo Considerando que a fumaça de cigarro é um problema de saúde pública que está crescendo entre os adolescentes, o objetivo deste estudo foi investigar o impacto da fumaça de cigarro na sinalização osteogênica e osteoclastogênica da sutura palatina mediana de ratos. Foram utilizados ratos Wistar machos expostos (n=30) e não expostos à fumaça de cigarro (n=30). A exposição à fumaça de cigarro foi realizada duas vezes ao dia por 3 minutos, com um intervalo de 12 horas entre as exposições. Os animais foram mortos após o período experimental de 3, 7, 14 e 21 dias. Os tecidos coletados foram analisados em microscópico de luz e pelo RT-PCR em tempo real foi realizado para investigar a expressão gênica. s dados obtidos foram comparados usando o testes de Kruskal Wallis e Dunn (⍺ = 5%). Morfoligicamente, não houve mudança significativa na sutura palatina mediana nos ratos expostos ou não à fumaça de cigarro durante os tempo de 3, 7, 14 e 21 dias (p> 0.05). Por outro lado, a sinalização osteogênica esta aumentada nos animais expostos à fumaça e foi caracterizado por um aumento da produção de RANKL aos 3 e 14 dias (p <0.05), sem mudança na síntese da produção de RANK e osteoprotegerina (p> 0.05). Curiosamente, nos animais expostos, também foi observado um aumento precoce da síntese de osteocalcina, sialoproteína óssea e de osteopontina aos 3 dias de exposição, o que não foi mantido ao longo do tempo. A fumaça de cigarro modula a sinalização osteogênica e osteoclastogênica na sutura palatina mediana de ratos jovens, apesar de não tenha sido evidenciado alterações morfológicas.

CO2 laser irradiation for debonding ceramic orthodontic brackets

Abstract This study evaluated shear bond strength (SBS), adhesive remnant index (ARI) and fracture mode of chemically and mechanically retained ceramic brackets bonded with different composite resins and irradiated with CO2 laser. The null hypothesis was that ceramic brackets bonded with different composite resins and irradiated with CO2 laser would have similar SBS values. Ninety human premolars were divided into four experimental groups according to the combination of type of composite resin (Transbond XT and Z 250) and type of ceramic bracket (Fascination and Mystique), and two control groups (n=15). In the four experimental groups, the brackets were irradiated with CO2 laser at 10 W for 3 seconds before SBS testing. Enamel surface ARI was calculated after debonding under electron microscopy scanning. ANOVA and the Mann-Whitney test were used for statistical analysis. The laser groups had lower SBS values than the non-irradiated groups (control) (p<0.05). The mechanically retained brackets (Mystique) had the higher (p<0.05) and Z250 had the lower SBS values after CO2 laser irradiation. The groups bonded with Z250 had the highest ARI. Adhesive fractures were the most prevalent. The null hypothesis was rejected. CO2 laser decreased SBS efficiently and facilitated debonding of mechanically and chemically retained ceramic brackets.

Resumo O objetivo do estudo foi avaliar a resistência de união ao cisalhamento da colagem (RCC), o índice de remanescente de adesivo (IRA) e o modo de fratura de bráquetes cerâmicos com retenção química e mecânica colados com diferentes compositos e irradiados com laser de CO2. A hipótese nula testada foi que bráquetes colados com diferentes compósitos e irradiados com laser de CO2 apresentam valores semelhantes de RCC. Noventa pré-molares humanos foram divididos em 6 grupos (n=15): 2 controles e 4 experimentais que se diferenciaram pelo tipo de bráquete ceramic (Fascination and Mystique) e pelo compósito de fixação (Transbond XT e Z 250). Nos quatro grupos experimentais, os bráquetes foram irradiados com laser de CO2 com 10W por 3 segundos anteriormente ao teste de RCC. O IRA das superficies de esmalte foram avaliados após a descolagem e submetidos a análise em microscopia electrônica de varredura (MEV). Para análise estatística foram utilizados ANOVA e o teste de mann-Whitney. Os grupos laser mostraram valores de RCC menores que os grupos não irradiados (controles) (p<0.05). Os bráquetes com retenção mecânica (Mystique) mostraram alta RCC (p<0.05) e o compósito Z 250 obteve os mais baixos valores de RCC após irradiação com laser. Os grupos colados com o compósito Z 250 apresentaram os mais altos escores do IRA. O modo de fratura mais prevalente foi a adesiva. A hipótese nula foi rejeitada. O laser de CO2 foi eficaz para diminuir os valores de RCC e facilitou a descolagem dos bráquetes cerâmicos de retenção química e mecânica

Human permanent tooth sizes are associated with genes encoding oestrogen receptors.

OBJECTIVE: To evaluate if genetic polymorphisms in the oestrogen receptor 1 (ESR1) and oestrogen receptor 2 (ESR2) genes encoded for oestrogen receptors alpha (ERα) and beta (ERß) are involved in permanent tooth size. DESIGN: Cross-sectional study. SETTING: Orthodontic Clinic at School of Dentistry of Ribeirão Preto, University of São Paulo. PARTICIPANTS: A total of 108 orthodontic patients. MATERIALS AND METHODS: Pre-treatment orthodontic records were evaluated. Dental casts were used to determine the maximum crown measurements of fully erupted permanent teeth in the mesiodistal dimensions. Second and third molars were not included in the analysis. Genomic DNA samples were used for the genotyping of four genetic polymorphisms: ESR1 (rs9340799 and rs2234693) and ESR2 (rs1256049 and rs4986938). The associations between tooth size and sex were evaluated using t test. The associations between tooth size and genotype were analysed with linear regression and adjusted by sex at an alpha of P⩽0.05. RESULTS: Female patients presented smaller tooth size than male patients. A statistically significant difference was observed in almost all teeth (P<0.05). The genetic polymorphisms in rs9340799, rs2234693, rs1256049 and rs4986938 were associated with some tooth sizes in both the maxilla and mandible (P<0.05). CONCLUSION: This study provides evidence that genetic polymorphisms in ESR1 and ESR2 could be associated with tooth size in permanent teeth.

Effect of ovariectomy on maxilla and mandible dimensions of female rats.

OBJECTIVE: The role of oestrogen in craniofacial growth still remains unclear. Therefore, the present study aimed to assess the effect of oestrogen deficiency on maxilla and mandible dimensions. SETTING AND SAMPLE POPULATION: The study was conducted at the Department of Pediatric Dentistry at the School of Dentistry of Ribeirão Preto, University of São Paulo, and used forty female Wistar rats. MATERIAL AND METHODS: Ovariectomy (OVX) and placebo surgery (Sham) were performed when animals were twenty-one days old (prepubertal stage). Dimensions of the maxilla and mandible were assessed by craniometric analysis using radiographs, during and after puberty of the animals (45 and 63 days old, respectively). Quantitative real-time PCR and immunohistochemical analyses were performed to determine the expression and localization, respectively, of oestrogen receptor alpha (ERα) and oestrogen receptor beta (ERß) in different growth sites of the evaluated structures at puberty. The differences between the groups for each outcome were evaluated using the t test with an established alpha error of 5%. RESULTS: There were significant differences between the OVX and Sham groups for horizontal and vertical linear measurements in the maxilla and the mandible at both pubertal and post-pubertal stages (P < .05). The ovariectomized rats showed significantly greater measures for all dimensions assessed. No differences in gene expression of ERα and ERß were identified at the different growth sites between the OVX and Sham groups (P > .05). Immunohistochemical analyses revealed the presence of both oestrogen receptors in osteoblasts and chondrocytes in the midpalatal suture and mandibular condyle, respectively, in the OVX and Sham groups. CONCLUSION: Our results suggest that oestrogen deficiency from the prepubertal stage might increase the growth of the maxilla and mandible in female rats.

Possible association between craniofacial dimensions and genetic markers in ESR1 and ESR2.

OBJECTIVE: To investigate the association of genetic markers in ESR1 and ESR2 with craniofacial measurements. DESIGN: Cross-sectional study. SETTING: School of Dentistry of Ribeirão Preto, University of São Paulo. PARTICIPANTS: A total of 146 biologically unrelated, self-reported Caucasian Brazilians with no syndromic conditions were included. METHODS: Sagittal and vertical measurements (ANB, S-N, Ptm'-A', Co-Gn, Go-Pg, N-Me, ANS-Me, S-Go and Co-Go) from lateral cephalograms were examined for craniofacial evaluation. DNA was extracted from saliva and genetic markers in ESR1 (rs2234693 and rs9340799) and in ESR2 (rs1256049 and rs4986938) were analysed by real-time polymerase chain reaction. Hardy-Weinberg equilibrium was evaluated using the Chi-square test within each marker. The associations between craniofacial dimensions and genotypes were analysed by linear regression and adjusted by sex and age. The established alpha was 5%. RESULTS: Individuals carrying CC in ESR1 rs2234693 had a decrease of -3.146 mm in ANS-Me (P = 0.044). In addition, rs4986938 in ESR2 was associated with S-N measurement (P = 0.009/ ß = -3.465). This marker was also associated with Go-Pg measurement, in which the CC genotype had a decrease of -3.925 mm in the length of the mandibular body (P = 0.043). CONCLUSION: The present study suggests that in ESR1 and ESR2 are markers for variations in the craniofacial dimensions. However, further research should confirm the results.

Transverse maxillary deficiency: treatment alternatives in face of early skeletal maturation

ABSTRACT Transverse deficiencies should be a priority in orthodontic treatment, and should be corrected as soon as diagnosed, to restore the correct transverse relationship between maxilla and mandible and, consequently, normal maxillary growth. Corrections may be performed at the skeletal level, by opening the midpalatal suture, or by dentoalveolar expansion. The choice of a treatment alternative depends on certain factors, such as age, sex, degree of maxillary hypoplasia and maturation of the midpalatal suture. Thus, the present study discusses different treatment approaches to correct maxillary hypoplasia in patients with advanced skeletal maturation.

RESUMO Os problemas transversais devem ser priorizados no tratamento ortodôntico e corrigidos assim que diagnosticados, para restituir a correta relação transversal entre maxila e mandíbula e, consequentemente, restabelecer o crescimento maxilar normal. A correção pode ser realizada em nível esquelético, por meio da abertura da sutura palatina mediana (SPM), ou por expansão dentoalveolar. A opção de tratamento depende de alguns fatores como idade, sexo, grau de hipoplasia da maxila e a maturação da SPM. Assim, o objetivo do presente trabalho foi discutir as diferentes abordagens terapêuticas para correção da hipoplasia maxilar em pacientes com maturação esquelética avançada.

Quantification of pro-inflammatory cytokines and osteoclastogenesis markers in successful and failed orthodontic mini-implants.

OBJECTIVES: Miniscrew has been frequently used, considering that anchorage control is a critical point in orthodontic treatment, and its failure, the main adverse problem. Using two groups of stable (successful) and unstable (failed) mini-implants, this in vivo study aimed to quantify proinflammatory cytokines IL-1 α, IL-6, IL-17, and TNF-α and osteoclastogenesis marker RANK, RANKL, and OPG in gingival tissue, using the real-time polymerase chain reaction technique. METHODOLOGY: Thirteen patients of both sexes (11-49 years old) under orthodontic treatment were selected, obtaining 11 successful and 7 failed mini-implants. The mini-implants were placed and removed by the same surgeon, in both jaws. The mean time of permanence in the mouth was 29.4 months for successful and 7.6 months for failed mini-implants. At removal time, peri-mini-implant gingival tissue samples were collected and processed for quantification of the proinflammatory cytokines and osteoclastogenesis markers. Nonparametric Wilcoxon rank-sum test considering the clusters and Kruskal-Wallis test were used for statistical analysis (α=0.05). RESULTS: No significant difference (p>0.05) was observed between the groups for either quantification of cytokines or osteoclastogenesis markers, except for IL-6 (p<0.05). CONCLUSIONS: It may be concluded that the expression of IL-1α, IL-17, TNF-α, RANK, RANKL, and OPG in peri-implant gingival tissue were not determinant for mini-implant stability loss, but the higher IL-6 expression could be associated with mini-implant failure.

Polymorphisms in FGF3, FGF10, and FGF13 May Contribute to the Presence of Temporomandibular Disorders in Patients Who Required Orthognathic Surgery.

BACKGROUND: To evaluate whether genetic polymorphisms in FGF3, FGF10, and FGF13 are associated with temporomandibular disorders (TMD) in patients that presented dentofacial deformities requiring orthognathic surgery. MATERIAL AND METHODS: The sample comprised a total of 113 patients of both sexes. The diagnosis of TMD was performed before orthognathic surgery between Research Diagnostic Criteria for Temporomandibular Disorders (RDC-TMD). According to the TMD assessment, the patients were divided into 3 major groups: myofascial pain, articular disc displacements and other TMD conditions (arthralgia, arthritis, and arthrosis). Genomic DNA was collected from saliva samples and genetic polymorphisms in FGF3 (rs1893047 and rs7932320), FGF10 (rs900379) and FGF13 (rs5931572 and rs5974804) were analyzed by real-time polymerase chain reactions. The association between the TMD conditions and the genetic polymorphisms assessed were analyzed by Poisson Regression. The model was calculated on bivariate and adjusted by sex. The established alpha was 5%. Data were analyzed by using SPSS software (IBM, Armonk, NY). RESULTS: The genetic polymorphisms rs7932320 in FGF3 (P < 0.001) and rs900379 in FGF10 (P < 0.05) were associated with the presence of muscle disorder. The genetic polymorphisms rs1893047 in FGF3, rs900379 in FGF10, and rs5974804 and rs5931572 in FGF13, were associated with the presence of disk displacement (P < 0.05). The genetic polymorphisms rs1893047 and rs7932320 in FGF3, rs900379 in FGF10, and rs900379 in FGF10 were associated with other TMD conditions (P < 0.05). CONCLUSION: Genetic polymorphisms in FGF3, FGF10, and FGF13 genes were associated with temporomandibular disorders in a population with dentofacial deformities.

Tooth agenesis-related GLI2 and GLI3 genes may contribute to craniofacial skeletal morphology in humans.

OBJECTIVE: The present cross-sectional, multi-centre, genetic study aimed to determine, whether single nucleotide polymorphisms (SNPs) in tooth agenesis (TA)-associated GLI2 and GLI3 genes contribute to the development of craniofacial skeletal morphology in humans. DESIGN: Orthodontic patients from an ethnically heterogeneous population were selected for the present study (n = 594). The presence or absence of TA was determined by analysis of panoramic radiography and dental records. The subjects were classified according to their skeletal malocclusion and facial growth pattern by means of digital cephalometric analysis. Genomic DNA was extracted from squamous epithelial cells of the buccal mucosa and SNPs in GLI2 (rs3738880, rs2278741) and GLI3 (rs929387, rs846266) were analysed by polymerase chain reaction using TaqMan chemistry and end-point analysis. RESULTS: Class II skeletal malocclusion presented a significantly lower frequency of TA (P < 0.05). Subjects without TA showed significantly higher ANB angles (P < 0.05). Genotype and/or allele distributions of the SNPs in GLI2 (rs3738880, rs2278741) and GLI3 (rs846266) were associated with the presence of TA (P < 0.05). The SNPs rs3738880, rs2278741 and rs929387 were also associated with some type of skeletal malocclusion (P < 0.05), but not with the facial growth pattern (P > 0.05). The G allele for TA-related GLI2 rs3738880 was strongly linked to the presence of Class III skeletal malocclusion (OR = 2.03; 95% CI = 1.37-3.03; P<3125 × 10-6). GLI2 rs2278741 C allele was overrepresented in individuals without TA, suggesting it as a protective factor for this dental phenotype (OR = 0.43; 95% CI = 0.24-0.78; P<625 × 10-5). CONCLUSION: The present study suggests that SNPs in TA-associated GLI2 and GLI3 genes may also play a role in the development of skeletal malocclusions. rs3738880 and rs2278741 in GLI2 seems to contribute to the genetic background for skeletal Class III and TA, respectively. TA could be an additional predictor of craniofacial morphology in some cases. Further research replicating the reported associations should be performed.

Genetic polymorphism in ESR2 and risk of tooth agenesis

Introduction: Tooth agenesis (TA) is the congenital absence of teeth. Several studies have proposed a strong genetic background for this condition. Aim: The present cross-sectional study aimed to evaluate whether genetic polymorphisms in the genes that code for estrogen receptors ( ESR1 and ESR2 ) are associated with the presence of isolated TA in a Brazilian sample. Methods: Panoramic radiographs of 142 orthodontic patients were assessed to determine TA of permanent teeth (excluding third molars). DNA of patients was extracted from buccal cells from saliva to evaluate genetic polymorphisms in ESR1 ( rs2234693 and rs9340799 ) and ESR2 ( rs1256049 and rs4986938 ) by genotyping using the real-time PCR technique. For statistical analyses, associations between the distributions of the alleles and genotypes, and the ocurrence of TA were assessed for each genetic polymorphism, with an established alpha of 5%. Results: Thirteen patients had at least 1 congenital missing tooth. The number of congenitally missing teeth ranged from 1 to 11. The genetic polymorphisms rs2234693 and rs9340799 in ESR1 and rs1256049 in ESR2 were not associated with TA ( p > 0.05) . For the genetic polymorphism rs4986938 in ESR2, the genotype and allele distributions were significantly different between the patients with and without TA ( p < 0.05). The CC genotype and the C allele were overrepresented in the TA patients. Conclusion: The genetic polymorphism rs4986938 in ESR2 was associated with the ocurrence o f TA.

Introdução: A agenesia dentária (AD) é a ausência congênita de um ou mais dentes. Vários estudos vêm sugerindo o forte componente genético para essa condição. Objetivo: O presente estudo teve como objetivo avaliar se os polimorfismos genéticos nos genes que codificam os receptores de estrógeno ( ESR1 e ESR2 ) estão associados à ocorrrência de AD isolada em uma amostra brasileira. Métodos: Radiografias panorâmicas de 142 pacientes ortodônticos foram avaliadas para determinar AD de dentes permanentes (excluindo terceiros molares). O DNA dos pacientes foi extraído das células da mucosa bucal contidas na saliva para avaliar polimorfismos genéticos em ESR1 ( rs2234693 e rs9340799 ) e ESR2 ( rs1256049 e rs4986938 ) por genotipagem usando a técnica de PCR em tempo real. Para análises estatísticas, associações entre as distribuições dos alelos e genótipos e a ocorrrência de AD foram avaliadas para cada polimorfismo genético, com um alfa estabelecido de 5%. Resultados: Treze pacientes tiveram pelo menos 1 dente congenitamente ausente. O número de dentes congenitamente ausentes variou de 1 a 11. Os polimorfismos genéticos rs2234693 e rs9340799 no ESR1 e rs1256049 no ESR2 não foram associados à AD ( p > 0,05). Para o polimorfismo genético rs4986938 no ESR2 , as distribuições dos genótipos e dos alelos foram estatisticamente diferentes entre os pacientes com e sem AD ( p < 0,05). O genótipo CC e o alelo C estavam super-representados nos pacientes com AD. Conclusão: Houve associação entre o polimorfismo genético rs4986938 no ESR2 e a ocorrrência de AD.

Microbial species associated with dental caries found in saliva and in situ after use of self-ligating and conventional brackets

Abstract Objectives Enamel demineralization is among the main topics of interest in the orthodontic field. Self-ligating brackets have been regarded as advantageous in this aspect. The aim of this study was to evaluate the break homeostasis in the oral environment and the levels of microorganisms associated with dental caries among the different types of brackets. Material and Methods Twenty patients received two self-ligating brackets: In-Ovation®R, SmartClipTM, and one conventional GeminiTM. Saliva was collected before bonding (S0), 30 (S1) and 60 (S2) days after bonding. One sample of each bracket was removed at 30 and 60 days for the in situ analysis. Checkerboard DNA-DNA Hybridization was employed to evaluate the levels of microbial species as-sociated with dental caries. Data were evaluated by nonparametric Friedman and Wilcoxon tests at 5% significance level. Results The salivary levels of L. casei (p=0.033), S. sobrinus (p=0.011), and S. sanguinis (p=0.004) increased in S1. The in situ analyses showed alteration in S. mutans (p=0.047), whose highest levels were observed to the In-Ovation®R. Conclusions The orthodontic appliances break the salivary homeostasis of microorganisms involved in dental caries. The contamination pattern was different between self-ligating and conventional brackets. The In-Ovation®R presented worse performance considering the levels of cariogenic bacterial species.