Organometallic Oxidative Addition Complexes for S-Arylation of Free Cysteines.

Development of bioconjugation strategies to efficiently modify biomolecules is of key importance for fundamental and translational scientific studies. Cysteine S-arylation is an approach which is becoming more popular due to generally rapid kinetics and high chemoselectivity, as well as the strong covalently bonded S-aryl linkage created in these processes. Organometallic approaches to cysteine S-arylation have been explored that feature many advantages compared to their more traditional organic counterparts. In this Viewpoint, progress in the use of Au(III) and Pd(II) oxidative addition (OA) complexes for stoichiometric cysteine S-arylation is presented and discussed. A focus is placed on understanding the rapid kinetics of these reactions under mild conditions, as well as the ability to generate biomolecular heterostructures. Potential avenues for further exploration are addressed and usefulness of these methods to the practitioner are emphasized in the discussion.

Uniform trehalose nanogels for glucagon stabilization.

Glucagon is a peptide hormone that acts via receptor-mediated signaling predominantly in the liver to raise glucose levels by hepatic glycogen breakdown or conversion of noncarbohydrate, 3 carbon precursors to glucose by gluconeogenesis. Glucagon is administered to reverse severe hypoglycemia, a clinical complication associated with type 1 diabetes. However, due to low stability and solubility at neutral pH, there are limitations in the current formulations of glucagon. Trehalose methacrylate-based nanoparticles were utilized as the stabilizing and solubilizing moiety in the system reported herein. Glucagon was site-selectively modified to contain a cysteine at amino acid number 24 to covalently attach to the methacrylate-based polymer containing pyridyl disulfide side chains. PEG2000 dithiol was employed as the crosslinker to form uniform nanoparticles. Glucagon nanogels were monitored in Dulbecco's phosphate-buffered saline (DPBS) pH 7.4 at various temperatures to determine its long-term stability in solution. Glucagon nanogels were stable up to at least 5 months by size uniformity when stored at -20 °C and 4 °C, up to 5 days at 25 °C, and less than 12 hours at 37 °C. When glucagon stability was studied by either HPLC or thioflavin T assays, the glucagon was intact for at least 5 months at -20 °C and 4 °C within the nanoparticles at -20 °C and 4 °C and up to 2 days at 25 °C. Additionally, the glucagon nanogels were studied for toxicity and efficacy using various assays in vitro. The findings indicate that the nanogels were nontoxic to fibroblast cells and nonhemolytic to red blood cells. The glucagon in the nanogels was as active as glucagon alone. These results demonstrate the utility of trehalose nanogels towards a glucagon formulation with improved stability and solubility in aqueous solutions, particularly useful for storage at cold temperatures.

Comparison of Cyclic and Linear PEG Conjugates.

Bioconjugation of polymers to proteins is a method to impart improved stability and pharmacokinetic properties to biologic systems. However, the precise effects of polymer architecture on the resulting bioconjugates are not well understood. Particularly, cyclic polymers are known to possess unique features such as a decreased hydrodynamic radius when compared to their linear counterparts of the same molecular weight, but have not yet been studied. Here, we report the first bioconjugation of a cyclic polymer, poly(ethylene glycol) (PEG), to a model protein, T4 lysozyme, containing a single engineered cysteine residue (V131C). We compare the stability and activity of this conjugate with those of a linear PEG-T4 lysozyme analogue of similar molecular weight. Furthermore, we used molecular dynamics (MD) simulations to determine the behavior of the polymer-protein conjugates in solution. We introduce cyclic polymer-protein conjugates as potential candidates for the improvement of biologic therapeutics.

Ultrafast Au(III)-Mediated Arylation of Cysteine.

Through mechanistic work and rational design, we have developed the fastest organometallic abiotic Cys bioconjugation. As a result, the developed organometallic Au(III) bioconjugation reagents enable selective labeling of Cys moieties down to picomolar concentrations and allow for the rapid construction of complex heterostructures from peptides, proteins, and oligonucleotides. This work showcases how organometallic chemistry can be interfaced with biomolecules and lead to a range of reactivities that are largely unmatched by classical organic chemistry tools.

Organometallic S-arylation Reagents for Rapid PEGylation of Biomolecules.

Bioconjugation techniques for biomolecule-polymer conjugation are numerous; however, slow kinetics and steric challenges generally necessitate excess reagents or long reaction times. Organometallic transformations are known to circumvent these issues; yet, harsh reaction conditions, incompatibility in aqueous media, and substrate promiscuity often limit their use in a biological context. The work reported herein demonstrates a facile and benign organometallic Au(III) S-arylation approach that enables the synthesis of poly(ethylene glycol) monomethyl ether (mPEG)-protein conjugates with high efficiency. Isolable and bench-stable 2, 5, and 10 kDa mPEG-Au(III) reagents were synthesized via oxidative addition into terminal aryl iodide substituents installed on mPEG substrates with a (Me-DalPhos)Au(I)Cl precursor. Reaction of the isolable mPEG-Au(III) oxidative addition complexes with a cysteine thiol on a biomolecule resulted in facile and selective cysteine arylation chemistry, forging covalent S-aryl linkages and affording the mPEG-biomolecule conjugates. Notably, low polymer reagent loadings were used to achieve near quantitative conversion at room temperature in 1 min due to the rapid kinetics and high chemoselectivity of this Au-based bioconjugation approach. Therefore, this work represents an important addition to the protein-polymer conjugation chemical toolbox.

Enhanced Bioactivity of a Human GHR Antagonist Generated by Solid-Phase Site-Specific PEGylation.

Growth hormone (GH) has been implicated in cancer progression andis a potential target for anticancer therapy. Currently, pegvisomant is the only GH receptor (GHR) antagonist approved for clinical use. Pegvisomant is a mutated GH molecule (B2036) which is PEGylated on amine groups to extend serum half-life. However, PEGylation significantly reduces the bioactivity of the antagonist in mice. To improve bioactivity, we generated a series of B2036 conjugates with the site-specific attachment of 20, 30, or 40 kDa methoxyPEG maleimide (mPEG maleimide) by introduction of a cysteine residue at amino acid 144 (S144C). Recombinant B2036-S144C was expressed in Escherichia coli, purified, and then PEGylated using cysteine-specific conjugation chemistry. To avoid issues with dimerization due to the introduced cysteine, B2036-S144C was PEGylated while immobilized on an Ni-nitrilotriacetic (Ni-NTA) acid column, which effectively reduced disulfide-mediated dimer formation and allowed efficient conjugation to mPEG maleimide. Following PEGylation, the IC50 values for the 20, 30, and 40 kDa mPEG maleimide B2036-S144C conjugates were 66.2 ± 3.8, 106.1 ± 7.1, and 127.4 ± 3.6 nM, respectively. The circulating half-life of the 40 kDa mPEG conjugate was 58.3 h in mice. Subcutaneous administration of the 40 kDa mPEG conjugate (10 mg/kg/day) reduced serum insulin-like growth factor I (IGF-I) concentrations by 50.6%. This in vivo reduction in serum IGF-I was at a considerably lower dose compared to the higher doses required to observe comparable activity in studies with pegvisomant. In conclusion, we have generated a novel PEGylated GHR antagonist by the solid-phase site-specific attachment of mPEG maleimide at an introduced cysteine residue, which effectively reduces serum IGF-I in vivo.

Genetic Code Expansion Enables Site-Specific PEGylation of a Human Growth Hormone Receptor Antagonist through Click Chemistry.

Regulation of human growth hormone (GH) signaling has important applications in the remediation of several diseases including acromegaly and cancer. Growth hormone receptor (GHR) antagonists currently provide the most effective means for suppression of GH signaling. However, these small 22 kDa recombinantly engineered GH analogues exhibit short plasma circulation times. To improve clinical viability, between four and six molecules of 5 kDa poly(ethylene glycol) (PEG) are nonspecifically conjugated to the nine amines of the GHR antagonist designated as B2036 in the FDA-approved therapeutic pegvisomant. PEGylation increases the molecular weight of B2036 and considerably extends its circulation time, but also dramatically reduces its bioactivity, contributing to high dosing requirements and increased cost. As an alternative to nonspecific PEGylation, we report the use of genetic code expansion technology to site-specifically incorporate the unnatural amino acid propargyl tyrosine (pglY) into B2036 with the goal of producing site-specific protein-polymer conjugates. Substitution of tyrosine 35 with pglY yielded a B2036 variant containing an alkyne functional group without compromising bioactivity, as verified by a cellular assay. Subsequent conjugation of 5, 10, and 20 kDa azide-containing PEGs via the copper-catalyzed click reaction yielded high purity, site-specific conjugates with >89% conjugation efficiencies. Site-specific attachment of PEG to B2036 is associated with substantially improved in vitro bioactivity values compared to pegvisomant, with an inverse relationship between polymer size and activity observed. Notably, the B2036-20 kDa PEG conjugate has a molecular weight comparable to pegvisomant, while exhibiting a 12.5 fold improvement in half-maximal inhibitory concentration in GHR-expressing Ba/F3 cells (103.3 nM vs 1289 nM). We expect that this straightforward route to achieve site-specific GHR antagonists will be useful for GH signal regulation.

Organometallic Gold(III) Reagents for Cysteine Arylation.

An efficient method for chemoselective cysteine arylation of unprotected peptides and proteins using Au(III) organometallic complexes is reported. The bioconjugation reactions proceed rapidly (<5 min) at ambient temperature in various buffers and within a wide pH range (0.5-14). This approach provides access to a diverse array of S-aryl bioconjugates including fluorescent dye, complex drug molecule, affinity label, poly(ethylene glycol) tags, and a stapled peptide. A library of Au(III) arylation reagents can be prepared as air-stable, crystalline solids in one step from commercial reagents. The selective and efficient arylation procedures presented in this work broaden the synthetic scope of cysteine bioconjugation and serve as promising routes for the modification of complex biomolecules.

Synthesis and Biological Evaluation of a Degradable Trehalose Glycopolymer Prepared by RAFT Polymerization.

There is a significant need for new biodegradable protein stabilizing polymers. Herein, the synthesis of a polymer with trehalose side chains and hydrolytically degradable backbone esters and its evaluation for protein stabilization and cytotoxicity are described. Specifically, an alkene-containing parent polymer is synthesized by reversible addition-fragmentation chain transfer polymerization, and thiolated trehalose is installed using a radical-initiated thiol-ene reaction. The stabilizing properties of the polymer are investigated by thermally stressing granulocyte colony-stimulating factor (G-CSF), which is expressed and purified using a custom-designed G-CSF fusion protein with a polyhistidine-tagged maltose binding protein. The degradable polymer is shown to stabilize G-CSF to 66% after heating at 40 °C. Poly(5,6-benzo-2-methylene-1,3-dioxepane (BMDO)-co-butyl methacrylate-trehalose) is degraded and its cellular compatibility is investigated. While the polymer is noncytotoxic, cytotoxic effects are observed from the degraded products in fibroblasts and murine myeloblasts. These data provide important information for future use of BMDO-containing trehalose glycopolymers for biomedical applications.

Design of modular dual enzyme-responsive peptides.

Dual enzyme-responsive peptides were synthesized by masking the ɛ-amine of lysine with various enzyme substrates. Enzymatic cleavage of these sequences unmasked the ɛ-amine, allowing for further digestion by a second enzyme, which was monitored colorimetrically. This modular peptide design should provide substrates for a large combination of clinically relevant enzymes.

Trehalose Glycopolymer Enhances Both Solution Stability and Pharmacokinetics of a Therapeutic Protein.

Biocompatible polymers such as poly(ethylene glycol) (PEG) have been successfully conjugated to therapeutic proteins to enhance their pharmacokinetics. However, many of these polymers, including PEG, only improve the in vivo lifetimes and do not protect proteins against inactivation during storage and transportation. Herein, we report a polymer with trehalose side chains (PolyProtek) that is capable of improving both the external stability and the in vivo plasma half-life of a therapeutic protein. Insulin was employed as a model biologic, and high performance liquid chromatography and dynamic light scattering confirmed that addition of trehalose glycopolymer as an excipient or covalent conjugation prevented thermal or agitation-induced aggregation of insulin. The insulin-trehalose glycopolymer conjugate also showed significantly prolonged plasma circulation time in mice, similar to the analogous insulin-PEG conjugate. The insulin-trehalose glycopolymer conjugate was active as tested by insulin tolerance tests in mice and retained bioactivity even after exposure to high temperatures. The trehalose glycopolymer was shown to be nontoxic to mice up to at least 1.6 mg/kg dosage. These results together suggest that the trehalose glycopolymer should be further explored as an alternative to PEG for long circulating protein therapeutics.

Core/shell protein-reactive nanogels via a combination of RAFT polymerization and vinyl sulfone postmodification.

AIM: A promising nanogel vaccine platform was expanded toward antigen conjugation. MATERIALS & METHODS: Block copolymers containing a reactive ester solvophobic block and a PEG-like solvophilic block were synthesized via reversible addition-fragmentation chain-transfer polymerization. Following self-assembly in DMSO, the esters allow for core-crosslinking and hydrophilization by amide bond formation with primary amines. Free thiols were accessed at the polymer chain ends through aminolysis of the reversible addition-fragmentation chain-transfer groups, and into the nanogel core by reactive ester conversion with cysteamine. Subsequently, free thiols were converted into vinyl sulfone moieties. RESULTS: Despite sterical constraints, nanogel-associated vinyl sulfone moieties remained well accessible for cysteins to enforce protein conjugation successfully. CONCLUSION: Our present findings provide a next step toward well-defined vaccine nanoparticles that can co-deliver antigen and a molecular adjuvant.

Homodimeric Protein-Polymer Conjugates via the Tetrazine-trans-Cyclooctene Ligation.

Tetrazine end-functionalized telechelic polymers were synthesized by controlled radical polymerization (CRP) and employed to generate T4 Lysozyme homodimers. Mutant T4 Lysozyme (V131C), containing a single surface-exposed cysteine, was modified with a protein-reactive trans-cyclooctene (T4L-TCO). Reversible addition-fragmentation chain transfer (RAFT) polymerization yielded poly(N-isopropylacrylamide) (pNIPAAm) with a number average molecular weight (Mn by 1H-NMR) of 2.0 kDa and a dispersity (D by GPC) of 1.05. pNIPAAm was then modified at both ends by post-polymerization with 6-methyl tetrazine. For comparison, 2.0 kDa bis-tetrazine poly(ethylene glycol) (PEG) and 2.0 kDa bis-maleimide pNIPAAm were synthesized. Ligation of T4L-TCO to bis-tetrazine pNIPAAm or bis-tetrazine PEG resulted in protein homodimer in 38% yield and 37% yield, respectively, after only 1 hour, whereas bis-maleimide pNIPAAm resulted in only 5% yield of dimer after 24 h. This work illustrates the advantage of employing tetrazine ligation over maleimide thiol-ene chemistry for the synthesis of protein homodimer conjugates.

Fibroblast growth factor 2 dimer with superagonist in vitro activity improves granulation tissue formation during wound healing.

Site-specific chemical dimerization of fibroblast growth factor 2 (FGF2) with the optimal linker length resulted in a FGF2 homodimer with improved granulation tissue formation and blood vessel formation at exceptionally low concentrations. Homodimers of FGF2 were synthesized through site-specific linkages to both ends of different molecular weight poly(ethylene glycols) (PEGs). The optimal linker length was determined by screening dimer-induced metabolic activity of human dermal fibroblasts and found to be that closest to the inter-cysteine distance, 70 Å, corresponding to 2 kDa PEG. A straightforward analysis of the kinetics of second ligand binding as a function of tether length showed that, as the polymerization index (the number of monomer repeat units in the polymer, N) of the tether decreases, the mean time for second ligand capture decreases as ∼N(3/2), leading to an enhancement of the number of doubly bound ligands in steady-state for a given (tethered) ligand concentration. FGF2-PEG2k-FGF2 induced greater fibroblast metabolic activity than FGF2 alone, all other dimers, and all monoconjugates, at each concentration tested, with the greatest difference observed at low (0.1 ng/mL) concentration. FGF2-PEG2k-FGF2 further exhibited superior activity compared to FGF2 for both metabolic activity and migration in human umbilical vein endothelial cells, as well as improved angiogenesis in a coculture model in vitro. Efficacy in an in vivo wound healing model was assessed in diabetic mice. FGF2-PEG2k-FGF2 increased granulation tissue and blood vessel density in the wound bed compared to FGF2. The results suggest that this rationally designed construct may be useful for improving the fibroblast matrix formation and angiogenesis in chronic wound healing.

Direct Write Protein Patterns for Multiplexed Cytokine Detection from Live Cells Using Electron Beam Lithography.

Simultaneous detection of multiple biomarkers, such as extracellular signaling molecules, is a critical aspect in disease profiling and diagnostics. Precise positioning of antibodies on surfaces, especially at the micro- and nanoscale, is important for the improvement of assays, biosensors, and diagnostics on the molecular level, and therefore, the pursuit of device miniaturization for parallel, fast, low-volume assays is a continuing challenge. Here, we describe a multiplexed cytokine immunoassay utilizing electron beam lithography and a trehalose glycopolymer as a resist for the direct writing of antibodies on silicon substrates, allowing for micro- and nanoscale precision of protein immobilization. Specifically, anti-interleukin 6 (IL-6) and antitumor necrosis factor alpha (TNFα) antibodies were directly patterned. Retention of the specific binding properties of the patterned antibodies was shown by the capture of secreted cytokines from stimulated RAW 264.7 macrophages. A sandwich immunoassay was employed using gold nanoparticles and enhancement with silver for the detection and visualization of bound cytokines to the patterns by localized surface plasmon resonance detected with dark-field microscopy. Multiplexing with both IL-6 and TNFα on a single chip was also successfully demonstrated with high specificity and in relevant cell culture conditions and at different times after cell stimulation. The direct fabrication of capture antibody patterns for cytokine detection described here could be useful for biosensing applications.

Imine Hydrogels with Tunable Degradability for Tissue Engineering.

A shortage of available organ donors has created a need for engineered tissues. In this context, polymer-based hydrogels that break down inside the body are often used as constructs for growth factors and cells. Herein, we report imine cross-linked gels where degradation is controllable by the introduction of mixed imine cross-links. Specifically, hydrazide-functionalized poly(ethylene glycol) (PEG) reacts with aldehyde-functionalized PEG (PEG-CHO) to form hydrazone linked hydrogels that degrade quickly in media. The time to degradation can be controlled by changing the structure of the hydrazide group or by introducing hydroxylamines to form nonreversible oxime linkages. Hydrogels containing adipohydrazide-functionalized PEG (PEG-ADH) and PEG-CHO were found to degrade more rapidly than gels formed from carbodihydrazide-functionalized PEG (PEG-CDH). Incorporating oxime linkages via aminooxy-functionalized PEG (PEG-AO) into the hydrazone cross-linked gels further stabilized the hydrogels. This imine cross-linking approach should be useful for modulating the degradation characteristics of 3D cell culture supports for controlled cell release.

Protein-polymer conjugation via ligand affinity and photoactivation of glutathione S-transferase.

A photoactivated, site-selective conjugation of poly(ethylene glycol) (PEG) to the glutathione (GSH) binding pocket of glutathione S-transferase (GST) is described. To achieve this, a GSH analogue (GSH-BP) was designed and chemically synthesized with three functionalities: (1) the binding affinity of GSH to GST, (2) a free thiol for polymer functionalization, and (3) a photoreactive benzophenone (BP) component. Different molecular weights (2 kDa, 5 kDa, and 20 kDa) of GSH-BP modified PEGs (GSBP-PEGs) were synthesized and showed conjugation efficiencies between 52% and 76% to GST. Diazirine (DA) PEG were also prepared but gave conjugation yields lower than for GSBP-PEGs. PEGs with different end-groups were also synthesized to validate the importance of each component in the end-group design. End-groups included glutathione (GS-PEG) and benzophenone (BP-PEG). Results showed that both GSH and BP were crucial for successful conjugation to GST. In addition, conjugations of 5 kDa GSBP-PEG to different proteins were investigated, including bovine serum albumin (BSA), lysozyme (Lyz), ubiquitin (Ubq), and GST-fused ubiquitin (GST-Ubq) to ensure specific binding to GST. By combining noncovalent and covalent interactions, we have developed a new phototriggered protein-polymer conjugation method that is generally applicable to GST-fusion proteins.

Synthesis of photodegradable macromers for conjugation and release of bioactive molecules.

Hydrogel scaffolds are used in biomedicine to study cell differentiation and tissue evolution, where it is critical to control the delivery of chemical cues both spatially and temporally. While large molecules can be physically entrapped in a hydrogel, moderate molecular weight therapeutics must be tethered to the hydrogel network through a labile linkage to allow controlled release. We synthesized and characterized a library of polymerizable ortho-nitrobenzyl (o-NB) macromers with different functionalities at the benzylic position (alcohol, amine, BOC-amine, halide, acrylate, carboxylic acid, activated disulfide, N-hydroxysuccinyl ester, biotin). This library of polymerizable macromers containing o-NB groups should allow direct conjugation of nearly any type of therapeutic agent and its subsequent controlled photorelease from a hydrogel network. As proof-of-concept, we incorporated the N-hydroxysuccinyl ester macromer into hydrogels and then reacted phenylalanine with the NHS ester. Upon exposure to light (λ = 365 nm; 10 mW/cm(2), 10 min), 81.3% of the phenylalanine was released from the gel. Utilizing the photodegradable macromer incorporating an activated disulfide, we conjugated a cell-adhesive peptide (GCGYGRGDSPG), a protein that exhibits enzymatic activity (bovine serum albumin (BSA)), and a growth factor (transforming growth factor-ß1 (TGF-ß1)) into hydrogels, controlled their release with light (λ = 365 nm; 10 mW/cm(2), 0-20 min), and verified the bioactivity of the photoreleased molecules. The photoreleasable peptide allows real-time control over cell adhesion. BSA maintains full enzymatic activity upon sequestration and release from the hydrogel. Photoreleased TGF-ß1 is able to induce chondrogenic differentiation of human mesenchymal stem cells comparable to native TGF-ß1. Through this approach, we have demonstrated that photodegradable tethers can be used to sequester peptides and proteins into hydrogel depots and release them in an externally controlled, predictable manner without compromising biological function.

Smart vaults: thermally-responsive protein nanocapsules.

Synthetic modification of a recombinant protein cage called a vault with stimuli-responsive smart polymers provides access to a new class of biohybrid materials; the polymer nanocapsules retain the structure of the protein cage and exhibit the responsive nature of the polymer. Vaults are naturally occurring ubiquitous ribonucleoprotein particles 41 × 41 × 72.5 nm composed of a protein shell enclosing multiple copies of two proteins and multiple copies of one or more small untranslated RNAs. Recombinant vaults are structurally identical but lack the vault content. Poly(N-isopropylacrylamide) (pNIPAAm), a polymer responsive to heat, was conjugated to recombinant vaults that were composed of ~78 copies of the major vault protein (MVP) modified to contain a cysteine rich region at the N-terminus (CP-MVP). The polymer was synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization to have a dansyl group at the alpha end and modified to have a thiol-reactive pyridyl disulfide at the omega end, which readily coupled to CP-MVP vaults. The resulting vault nanocapsules underwent reversible aggregation upon heating above the lower critical solution temperature (LCST) of the polymer as determined by electron microscopy (EM), dynamic light scattering experiments, and UV-vis turbidity analysis. The vault structure remained entirely intact throughout the phase transition; suggesting its use in a myriad of biomedical and biotechnology applications.

Synthesis of glycopolymers by controlled radical polymerization techniques and their applications.

Natural saccharides are involved in numerous biological processes. It has been shown that these carbohydrates play a role in cell adhesion and proliferation, as well as protein stabilization, organization, and recognition. Certain carbohydrates also serve as receptors for viruses and bacteria. They are over expressed in diseases such as cancer. Hence, a lot of effort has been focused on mimicking these sugars. Polymers with pendent saccharide groups, also known as glycopolymers, are studied as oligo- and polysaccharide mimics. Controlled radical polymerization (CRP) techniques such as atom transfer radical polymerization (ATRP), reversible addition-fragmentation chain transfer (RAFT) polymerization, and nitroxide-mediated polymerization (NMP), as well as cyanoxyl-mediated free radical polymerization have allowed chemists to synthesize well-defined glycopolymers that, in some cases, have particular end-group functionalities. This review focuses on the synthesis of glycopolymers by these methods and the applications of glycopolymers as natural saccharide mimics.