Membranes composed of poly(lactic acid)/poly(ethylene glycol) and Ora-pro-nóbis (Pereskia aculeata Miller) extract for dressing applications.

Wounds are considered one of the most critical medical conditions that must be managed appropriately due to the psychological and physical stress they cause for patients, as well as creating a substantial financial burden on patients and global healthcare systems. Nowadays, there is a growing interest in developing nanofiber mats loaded with varying plant extracts to meet the urgent need for advanced wound ressings. This study investigated the development and characterization of poly(lactic acid) (PLA)/ poly(ethylene glycol) (PEG) nanofiber membranes incorporated with Ora-pro-nóbis (OPN; 12.5, 25, and 50 % w/w) by the solution-blow-spinning (SBS) technique. The PLA/PEG and PLA/PEG/OPN nanofiber membranes were characterized by scanning electron microscopy (SEM), thermal properties (TGA and DSC), Fourier transform infrared spectroscopy (FTIR), contact angle measurements and water vapor permeability (WVTR). In addition, the mats were analyzed for swelling properties in vitro cell viability, and fibroblast adhesion (L-929) tests. SEM images showed that smooth and continuous PLA/PEG and PLA/PEG/OPN nanofibers were obtained with a diameter distribution ranging from 171 to 1533 nm. The PLA/PEG and PLA/PEG/OPN nanofiber membranes showed moderate hydrophobicity (~109-120°), possibly preventing secondary injuries during dressing removal. Besides that, PLA/PEG/OPN nanofibers exhibited adequate WVTR, meeting wound healing requirements. Notably, the presence of OPN gave the PLA/PEG membranes better mechanical properties, increasing their tensile strength (TS) from 3.4 MPa (PLA/PEG) to 5.3 MPa (PLA/PEG/OPN), as well as excellent antioxidant properties (Antioxidant activity with approximately 45 % oxidation inhibition). Therefore, the nanofiber mats based on PLA/PEG, especially those incorporated with OPN, are promising options for use as antioxidant dressings to aid skin healing.

Development of iron ore tailings based wood-cement composite panels.

This article evaluated the effect of using mining waste on the mechanical, physical, thermal, and microstructural properties of cement-wood panels. The percentages of 10, 20, 30, and 40% were evaluated as replacing cement with mining waste. The wood particles of Pinus oocarpa were evaluated for their chemical, anatomical, and physical characteristics, and the mining waste was evaluated for its granulometry, chemical composition, and inhibition index. The composites were evaluated for their physical-mechanical properties, X-ray diffraction and infrared spectroscopy analysis, microstructural, thermal, and durability. All evaluated treatments met the requirements of the Bison standard for MOR and MOE for static bending and internal bonding, even after accelerated aging. It was possible to conclude that it is feasible to replace 40% of cement with mining waste for the production of cement-wood panels in industrial scale.

Obtaining poly (lactic acid) nanofibers encapsulated with peppermint essential oil as potential packaging via solution-blow-spinning.

The development of active packaging based on biodegradable material and incorporating active compounds, such as essential oil, is a new technique to ensure food safety without harming the environment. In this study, nanofiber mats of poly (lactic acid)/ polyethylene glycol (PLA/PEG) blend incorporated with peppermint essential oil (PO) at different ratios (5-20 % v/w) were produced by solution-blow-spinning (SBS) for potential packaging application. Electron microscopy showed a cylindrical and interlaced morphology for PLA/PEG/PO and a significant increase in the diameter (139-192 nm) of the nanofibers by increasing PO content. All nanofibers showed high thermal stability (278-345 °C) suitable for use in the food industry. Nuclear magnetic resonance (13C NMR) spectrum confirmed PO in the nanofibers after SBS. ATR-FTIR spectral analysis supported the chemical composition of the nanofiber mats. PO addition led to obtaining hydrophobic nanofibers, enhancing the contact angle to 122° and decreasing water vapor permeability (60 % reduction compared to the PLA/PEG (3.0 g.mm.kPa-1.h-1.m-2). Although the PLA/PEG/20%PO nanofibers did not show halo formation in 24 h, they effectively extended the strawberries' shelf-life at 25 °C, evidencing PO release over time. It also reduced weight loss (2.5 % and 0.3 % weight loss after 5 days for PLA/PEG and PLA/PEG/20%PO, respectively) and increased firmness (8-12 N) for strawberries packed with the nanofiber mats. It is suggested that PLA/PEG films incorporating PO may be used as an active, environmentally friendly packaging material.

Development of quaternary nanocomposites made up of cassava starch, cocoa butter, lemongrass essential oil nanoemulsion, and brewery spent grain fibers.

We report on production of novel quaternary nanocomposite films based on thermoplastic starch (TPS, 8% w/v) derived from cassava, cocoa butter, (CB, 30% wt.%), and lemongrass essential oil (LEO, 1:1) nanoemulsions reinforced with different concentrations of brewery spent grain (BSG, 5 or 10 wt.%) fibers, by continuous casting. The chemical composition, the morphological, thermal, mechanical properties, film barrier, biodegradability in the vegetable compound, in addition to the application in chocolates, have been widely studied. The addition of CB, LEO, and BSG caused relevant changes in the starch-based films, such as increased extensibility (from 2.4-BSG5 to 9.4%-BSG10) and improved barrier to moisture (2.9 and 2.4 g.mm.kPa-1 .h-1 .m-2 ). Contrastingly, the thermal stability of the starch film was slightly decreased. The biodegradability of the herein developed quaternary nanocomposite films was the same as that of TPS films, eliminating concerns on the supplementation with active ingredients that are expected to have some biocidal effect. Despite checking antimicrobial activity only by contact under the biocomposites, chocolates packed with the films were well accepted by consumers, especially the samples of white chocolate stored in the BSG5 biocomposite. Overall, this new approach towards quaternary active, biodegradable films produced in a pilot-scale lamination unit was successful in either improving or at least maintaining the essential properties of TPS-based films for food packaging applications, while providing them with unique features and functionalities. PRACTICAL APPLICATION: This contribution relates to new approach toward quaternary films produced in a pilot-scale lamination unit. It relates to sustainability as it is both biodegradable and based on plant biomass, as well as produced via a clean, through high-yield process. The four components of the edible films we developed provide it with good in properties performance, as both a passive barrier (i.e. purely physical), and active, related to the sensory attributes of food, essential to be applied in food packaging. The valorization of a BSG also adds to the relevance of our contribution within the circular bioeconomy framework.