Increasing Mass Transfer Resistance of MOFs as a Reverse Tuning Strategy to Achieve High-Resolution Gas Chromatographic Separation.

In separation science, precise control and regulation of the MOF stationary phase are crucial for achieving a high separation performance. We supposed that increasing the mass transfer resistance of MOFs with excessive porosity to achieve a moderate mass transfer resistance of the analytes is the key to conducting the MOF stationary phase with a high resolution. Three-dimensional UiO-67 (UiO-67-3D) and two-dimensional UiO-67 (UiO-67-2D) were chosen to validate this strategy. Compared with UiO-67-3D with overfast mass transfer and low retention, the reduced porosity of UiO-67-2D increased the mass transfer resistance of analytes in reverse, resulting in improved separation performance. Kinetic diffusion experiments were conducted to verify the difference in mass transfer resistance of the analytes between UiO-67-3D and UiO-67-2D. In addition, the optimization of the UiO-67-2D thickness for separation revealed that a moderate diffusion length of the analytes is more advantageous in achieving the equilibrium of absorption and desorption.

[Rational design of high performance metal organic framework stationary phase for gas chromatography].

Metal organic frameworks (MOFs) are assembled from metal ions or clusters and organic ligands. The high tunability of these components offers a solid structural foundation for achieving efficient gas chromatography (GC) separation. This review demonstrates that the design of high performance MOFs with suitable stationarity should consider both the thermodynamic interactions provided by these MOFs and the kinetic diffusion of analytes. Thermodynamic parameters are basic indicators for describing the interactions between various analytes and the stationary phase. Thermodynamic parameters such as retention factors, McReynolds constants, enthalpy changes, and entropy changes can reflect the relative intensity of thermodynamic interactions. For example, a larger enthalpy change indicates a stronger thermodynamic interaction between the analytes and stationary phase, whereas a smaller enthalpy change indicates a weaker interaction. In addition, the degree of entropy change reflects the relative degrees of freedom of analytes in the stationary phase. A larger entropy change indicates that the analytes have fewer degrees of freedom in the stationary phase. The higher the degree of restriction, the closer the adsorption of the analytes and, thus, the longer the retention time. Thermodynamic interactions, such as metal affinity, π-π interactions, polarity, and chiral sites, can be rationally introduced into MOF structures by pre- or post-modifications depending on the target analytes. These tailored thermodynamic interactions create a favorable environment with subtle differences for efficient analyte separation. For example, MOF stationarity may require large conjugation centers to provide specific π-π interactions to separate benzenes. Chiral groups may be required in the MOF structure to provide sufficient interactions to separate chiral isomers. The kinetic diffusion rate of the analytes is another critical factor that affects the separation performance of MOFs. The diffusion coefficients of analytes in the stationary phase (Ds) can be used to evaluate their diffusion rates. The chromatographic dynamics equation illustrates that the chromatographic peak of analytes tends to be sharper and more symmetrical when the Ds is large, whereas a wider trailing peak may appear when the Ds is small. The Van Deemter equation also proves that a low Ds may lead to a high theoretical plate height and low column efficiency, whereas a high Ds may lead to a low theoretical plate height and increased column efficiency. Analyte diffusion can be significantly influenced by the pore size, shape, particle size, and packing mode of MOFs. For instance, an excessively small pore size results in increased mass transfer resistance, which affects the diffusion of analytes in the stationary phase, probably leading to serious peak trailing. Thus, a suitable pore size is required to enhance the kinetic diffusion of analytes and improve the separation performance of MOFs. Theoretically, the design of a high performance MOF stationary phase requires the creation of routes for the rapid diffusion of analytes. However, the separation ability of an MOF is determined by not only the kinetic diffusion rate of the analytes but also the thermodynamic interactions it provides. An excessively fast diffusion rate may lead to insufficient interactions between the analytes and MOFs, compromising their ability to effectively separate different analytes. The thermodynamic interactions and kinetic diffusion of analytes are synergistic and mutually essential. Therefore, this review concludes with research on the influence of both the thermodynamic interactions and kinetic diffusion of analytes on the performance of MOF stationary phases. Based on the findings of this review, we propose that high performance MOF stationary phases can be achieved by balancing the thermodynamic interactions and kinetic diffusion of analytes in these phases through the rational design of the MOF structure. We believe that this review provides useful guidelines for the design of high performance MOF stationary phases.

Gradual deterioration of fatty liver disease to liver cancer via inhibition of AMPK signaling pathways involved in energy-dependent disorders, cellular aging, and chronic inflammation.

Introduction: Hepatocellular carcinoma (HCC) is the most prevalent primary liver cancer kind. According to recent research, a fatty liver increases the risk of hepatocellular cancer. Nevertheless, the AMPK signaling pathway is crucial. In addition, 5'-AMP-activated protein kinase (AMPK) is strongly linked to alterations in the tumor microenvironment, such as inflammation, hypoxia, and aging. The objective of this study is to evaluate the impact of the AMPK signaling pathway on the progression of fatty liver to HCC. Methods: In this study, we established a mouse liver cancer model using high-fat diets and nano-nitrosamines (nano-DEN). In addition, we employed a transcriptomic technique to identify all mRNAs detected in liver samples at the 25th weekexpression of proteins linked with the LKB1-AMPK-mTOR signaling pathway, inflammation, aging, and hypoxia was studied in microarrays of liver cancer tissues from mice and humans. These proteins included p-AMPK, LKB1, mTOR, COX-2, ß-catenin, HMGB1, p16, and HIF-1α. Results: Data were collected at different times in the liver as well as in cancerous and paracancerous regions and analyzed by a multispectral imaging system. The results showed that most of the genes in the AMPK signaling pathway were downregulated. Prakk1 expression was upregulated compared to control group but downregulated in the cancerous regions compared to the paracancerous regions. Stk11 expression was downregulated in the cancerous regions. Mtor expression was upregulated in the cancerous regions. During liver cancer formation, deletion of LKB1 in the LKB1-AMPK-mTOR signaling pathway reduces phosphorylation of AMPK. It contributed to the upregulation of mTOR, which further led to the upregulation of HIF1α. In addition, the expression of ß-catenin, COX-2, and HMGB1 were upregulated, as well as the expression of p16 was downregulated. Discussion: These findings suggest that changes in the AMPK signaling pathway exacerbate the deterioration of disrupted energy metabolism, chronic inflammation, hypoxia, and cellular aging in the tumor microenvironment, promoting the development of fatty liver into liver cancer.

Ultramicroporous metal-organic frameworks for capillary gas chromatographic separation.

Fine-tuning of the SiF62--containing metal-organic frameworks (SIFSIX) through the substitution of metal centers and ligands changed the apertures from 8.3 Å to 3.8 Å, resulting in ultramicropores and notably improving the separation performance of alkane isomers. Herein, we reported SIFSIX-1-Zn, SIFSIX-1-Cu and SIFSIX-3-Zn as representative stationary phases for capillary gas chromatography (GC). The capillary column coated with ultramicroporous SIFSIX-3-Zn efficiently separated the alkane isomers and benzene homologues, which outperformed SIFSIX-1-Zn and SIFSIX-1-Cu. This resulted from size matching between the window of the ultramicroporous SIFSIX-3-Zn and the analytes, which was also supported by McReynolds constants, column efficiency and peak tailing effect. It opened up a new avenue for ultramicroporous materials in the chromatography separation of isomers.