The Rotator Cable Does Not Stress Shield the Crescent Area During Shoulder Abduction.

BACKGROUND: It is accepted by the orthopaedic community that the rotator cable (RCa) acts as a suspension bridge that stress shields the crescent area (CA). The goal of this study was to determine if the RCa does stress shield the CA during shoulder abduction. METHODS: The principal strain magnitude and direction in the RCa and CA and shoulder abduction force were measured in 20 cadaveric specimens. Ten specimens underwent a release of the anterior cable insertion followed by a posterior release. In the other 10, a release of the posterior cable insertion was followed by an anterior release. Testing was performed for the native, single-release, and full-release conditions. The thicknesses of the RCa and CA were measured. RESULTS: Neither the principal strain magnitude nor the strain direction in either the RCa or the CA changed with single or full RCa release (p ≥ 0.493). There were no changes in abduction force after single or full RCa release (p ≥ 0.180). The RCa and CA thicknesses did not differ from one another at any location (p ≥ 0.195). CONCLUSIONS: The RCa does not act as a suspension bridge and does not stress shield the CA. The CA primarily transfers shoulder abduction force to the greater tuberosity. CLINICAL RELEVANCE: The CA is important in force transmission during shoulder abduction, and efforts should be made to restore its continuity with a repair or reconstruction.

Partial Distal Biceps Avulsion Results in a Significant Loss of Supination Force.

BACKGROUND: Partial avulsions of the short and/or long head of the distal biceps tendon cause pain and loss of strength. The goal of the present study was to quantify the loss of supination and flexion strength following a series of surgical releases designed to simulate partial and complete short and long head traumatic avulsions. METHODS: Mechanical testing was performed to measure supination moment arms and flexion force efficiency on 18 adult fresh-frozen specimens in pronation, neutral, and supination. The distal biceps footprint length was divided into 4 equal segments. In 9 specimens (the distal-first group), the tendon was partially cut starting distally by releasing 25%, 50%, and 75% of the insertion site. In the other 9 specimens (the proximal-first group), the releases started proximally. Mechanical testing was performed before and after each release. RESULTS: Significant decreases in the supination moment arm occurred after a 75% release in the distal-first release group; the decrease was 24% in pronation (p = 0.003) and 10% in neutral (p = 0.043). No significant differences in the supination moment arm (p ≥ 0.079) or in flexion force efficiency (p ≥ 0.058) occurred in the proximal-first group. CONCLUSIONS: A simulated complete short head avulsion significantly decreased the supination moment arm and therefore supination strength. CLINICAL RELEVANCE: A mechanical case can be made for repair of partial distal biceps tendon avulsions when the rupture involves ≥75% of the distal insertion site.

The moving valgus stress test produces more ulnar collateral ligament change in length during extension than during flexion: a biomechanical study.

HYPOTHESIS AND BACKGROUND: Injuries to the elbow medial ulnar collateral ligament (mUCL) pose a diagnostic challenge, with the moving valgus stress test (MVST) currently accepted as the gold-standard clinical test. This study sought to biomechanically evaluate the change in length of the ulnar collateral ligament (UCL) during flexion-extension using a null hypothesis that the mUCL will not experience a greater change in length with movement than with static loading. METHODS: Seven fresh-frozen human cadaveric elbows were tested with static and dynamic valgus stress. We measured (1) ligament length with a multi-camera optical system, (2) elbow flexion with an incremental encoder, and (3) valgus deviation with an electronic inclinometer. With a force applied to the wrist to simulate a clinical stress examination, the elbow was flexed and extended in a physiological elbow simulator to mimic the flexion and extension of the MVST. RESULTS: The simulated MVST produced more elongation of the UCL compared with static stress testing (P < .001). Ninety degrees of flexion produced the highest mean change, and the anterior and posterior bands demonstrated different length change characteristics. Comparison of dynamic flexion and extension showed a statistically significant difference in change in length: The mUCL reached the greatest change during extension, with the greatest changes during extension near 90° of flexion. DISCUSSION AND CONCLUSION: The MVST produces significantly more elongation of the mUCL than either a static test or a moving test in flexion. This study provides biomechanical evidence of the validity of the MVST as a superior examination technique for injuries to the UCL.

Long-term Functional Outcomes of Nonoperatively Treated Highly Displaced Scapular Body and Neck Fractures.

Historically, extra-articular scapular body fractures were treated nonsurgically, but displaced fractures of the glenoid neck can lead to dysfunction. Controversy exists regarding which extra-articular scapular fractures should be treated surgically; however, nonsurgical management of severely displaced scapular body fractures can result in satisfactory outcomes. Inclusion criteria for this study were medial or lateral displacement greater than 2 cm, angular deformity between fracture fragments greater than 45°, or glenopolar angle less than 22°. Functional outcomes included Disabilities of the Arm, Shoulder and Hand (DASH) score, Short Form-36 (SF-36) score, and American Shoulder and Elbow Surgeons (ASES) shoulder score. Radiographs and computed tomography scans were available for all patients. Range of motion (ROM), strength, other injuries, and complications also were recorded. Twelve patients (10 males, 2 females) with a mean age of 45.6 years (range, 29-57 years) underwent follow-up for a mean of 54.1 months (range, 28.2-74.4 months). At latest follow-up, mean DASH score was 8.9 (range, 0-35), mean SF-36 score was 72.2 (range, 57.3-96.1), and mean ASES score was 85.9 (range, 46.7-100). Mean ROM and strength expressed as a percentage of the contralateral side ranged from 88% to 99% and 70% to 93%, respectively. At longest follow-up, 10 patients reported excellent satisfaction with their treatment. There were no radiographic non-unions. One patient with concomitant clavicle and acromion fractures treated surgically had a postoperative infection requiring operative irrigation and debridement. None of the patients required or sought additional treatment. Nonoperative treatment of highly displaced scapular body fractures resulted in good patient satisfaction, satisfactory long-term functional outcomes, and only minor loss of motion and strength. [Orthopedics. 2020;43(3):e177-e181.].

Biomechanical Response to Distraction of Hip Capsular Reconstruction With Human Acellular Dermal Patch Graft.

PURPOSE: To quantify the biomechanical properties of the hip capsule with human dermal allograft reconstruction to determine whether a dermal patch restored capsular resistance to distraction. METHODS: Nine cadaveric hip specimens were dissected until capsule and bony structures remained and were then mounted in a testing fixture in neutral flexion and abduction. Four states of the hip capsule were sequentially tested under axial distraction of 5 mm measured with video analysis and with resultant force measurement: (1) intact hip capsule, (2) interportal capsulotomy, (3) capsulectomy to the zona orbicularis, and (4) capsular reconstruction with human dermal allograft using acetabular anchors and capsule-to-patch sutures. RESULTS: Capsulectomy was different from intact (P = .036), capsulotomy differed from capsulectomy (P = .012), and the repair was statistically significantly different from capsulectomy (P = .042); intact and reconstructed cases were not statistically significantly different. The force required for 5 mm of distraction decreased after interportal capsulotomy by an average of 9% compared with the intact state and further decreased after capsulectomy by 30% compared with the intact state. After capsular reconstruction using dermal allograft, force requirements increased by an average of 36% from the capsulectomy state, only 5% below the intact state. CONCLUSIONS: Human dermal allograft tissue graft provides restoration of distractive strength for use during hip capsule reconstruction with acetabular anchor fixation and distal soft-tissue fixation after capsulectomy in a cadaveric model. CLINICAL RELEVANCE: Capsular repair or reconstruction with a dermal patch offers time-zero restoration of function; intact and reconstructed cases showed no difference, and reconstruction restored a capsulectomy to a biomechanical equivalent of the intact case when distraction was applied.

Clinical and functional impairment after nonoperative treatment of distal biceps ruptures.

BACKGROUND: Clinical and functional impairment after nonoperative treatment of distal biceps ruptures is not well understood. The goal of this study was to measure patients' perceived disability, kinematic adjustment, and forearm supination power after nonoperative treatment of distal biceps ruptures. METHODS: Fourteen individuals after nonoperative treatment of distal biceps ruptures were matched to a control group of 18 uninjured volunteers. Both groups prospectively completed the Disabilities of the Arm, Shoulder and Hand (DASH), Single Assessment Numerical Evaluation (SANE), and Biceps Disability Questionnaire. Both performed a new timed isotonic supination test that was designed to simulate activities of daily life. The isotonic torque dynamometer measures the supination arc, center of supination arc, torque, angular velocity, and power. Motion analysis quantifies forearm and shoulder contributions to the arc of supination. RESULTS: The nonoperative treated group's DASH (23.2 ± 10.3) and SANE (59.6 ± 16.2) scores demonstrated a clinical meaningful impairment. The control group showed no significant differences in kinematic values between dominant and nondominant arms (P = .854). The nonoperative biceps ruptured arms, compared with their uninjured arms, changed supination motion by decreasing the supination arc (P ≤ .036), shifting the center of supination arc to a more pronated position (P ≤ .030), and increasing the shoulder contribution to rotation (P ≤ .001); despite this adaptation, their average corrected power of supination decreased by 47% (P = .001). CONCLUSION: Patients should understand that nonoperative treatment for distal biceps ruptures will result in varying degrees of functional loss as measured by the DASH, SANE, and Biceps Disability Questionnaire, change their supination kinematics during repetitive tasks, and that they will lose 47% of their supination power.

Cadaveric Study of Bone Tissue Temperature During Pin Site Drilling Using Fluoroptic Thermography.

BACKGROUND: Using fluoroptic thermography, temperature was measured during pin site drilling of intact cortical human cadaver bone with a combination of 1-step drilling, graduated drilling, and 1-step drilling with irrigation of 5.0-mm Schanz pins. MATERIALS AND METHODS: A 1440 revolutions per minute constant force drilling was used on tibial diaphyses while a sensor probe placed 0.5 mm adjacent to the drill hole measured temperature. Four drilling techniques on each of the tibial segments were performed: 3.5-mm drill bit, 5.0-mm Schanz pin, 5.0-mm Schanz pin in a 3.5-mm predrilled entry site, and 5.0-mm Schanz pin using irrigation. RESULTS: One-step drilling using a 5.0-mm Schanz pin without irrigation produced a temperature that exceeded the threshold temperature for heat-induced injury in 5 of the 8 trials. With the other 3 drilling techniques, only 1 in 24 trials produced a temperature that would result in thermal injury. This difference was found to be statistically significant (P = 0.003). The use of irrigation significantly reduced the maximum bone tissue temperature in 1-step drilling of a 5.0-mm Schanz pin (P = 0.02). One-step drilling with a 3.5-mm drill bit achieved maximum temperature significantly faster than graduated drilling and drilling with irrigation using a 5.0-mm Schanz pin (P < 0.01). CONCLUSIONS: One-step drilling with a 5.0-mm Schanz pin into cortical bone can produce temperatures that can lead to heat-induced injury. Irrigation alone can reduce the temperatures sufficiently to avoid damage. Predrilling can increase temperatures significantly, but the extent of any injury should be small.

The optimal number and location of sutures in conduit-assisted primary digital nerve repair.

We evaluated the strength of conduit-assisted primary digital nerve repairs, with varying suture location and number, in 56 digital nerves from cadavers. Maximum load to failure was tested for the following seven repairs, designated by the number of epineurial sutures followed by the number of sutures at each end of the conduit: 4 (epineurial sutures)/0 (sutures at each end of conduit), 4/4, 4/2, 2/2, 0/4, 0/2, 0/1. The 4/4 repair (3.0 N) was significantly stronger than 4/0 (1.5 N), 2/2 (1.6 N), 0/4 (2.0 N), 0/2 (1.4 N) and 0/1 (1.1 N). Considering all repair types, there was a significant correlation between suture number and failure load, with the strongest repair having a total of 12 sutures, which is impractical. Reasonable repair options, which have two sutures at each end of the conduit and either two or no epineurial sutures, are as strong as a four-suture epineurial repair but have less sutures at the coaptation site.

Factors That Determine Supination Strength Following Distal Biceps Repair.

BACKGROUND: Supination weakness commonly occurs after a distal biceps repair. The goal of this study was to identify factors that could influence postoperative supination strength through a full arc of forearm rotation. METHODS: Fifteen patients were prospectively studied and underwent a biceps repair using a posterior approach; this cohort was compared with a randomized selection of 17 anterior repair subjects. All patients underwent postoperative magnetic resonance imaging (MRI). Quantitative MRI analysis determined the insertion site angle of the tendon and supinator fat content. Supination strength was measured in 3 forearm positions. A multiple linear regression analysis was performed to determine the effect of all factors on supination strength. RESULTS: The anterior group had a significantly higher nonanatomic insertion site angle of the tendon than the control group and the posterior group (p < 0.001). The posterior group had significantly greater supinator fat content (p ≤ 0.019) than both the control group and the anterior group. After repair, the posterior group had significantly greater supination strength than the anterior group (p = 0.027). Multiple regression analysis (r = 0.765) found that an anatomic reinsertion of the ruptured tendon (ß = 1.159; p < 0.001), posterior approach (ß = 0.484; p = 0.043), and limited supinator muscle fat content (ß = 0.360; p = 0.013) were significant predictors of the restoration of supination strength in 60° of supination. CONCLUSIONS: Future directions for distal biceps tendon repair techniques should focus on restoring an anatomic reattachment site while limiting supinator damage. LEVEL OF EVIDENCE: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

The Importance of Preserving the Radial Tuberosity During Distal Biceps Repair.

BACKGROUND: The radial tuberosity contributes to the biceps supination moment arm and the elbow flexion moment. The purpose of our study was to compare the impact of a cortical bone trough versus an anatomic repair on measurements of the forearm supination moment arm and elbow flexion force efficiency. Our hypothesis was that a trough repair would decrease the tuberosity height, the native biceps supination moment arm, and elbow flexion force efficiency compared with an anatomic repair. METHODS: The isometric supination moment arm and elbow flexion force efficiency were measured in ten matched pairs of cadaveric upper limbs. After testing, the geometry of the proximal aspect of the radius was reconstructed with use of stereophotogrammetry. All of the repair sites were three-dimensionally reconstructed to quantify the disturbance of the trough on native anatomy. The tuberosity distance was defined as the distance between the central axis of the radius and the centroid of the respective repair site. RESULTS: Specimens with a trough repair had a 27% lower supination moment arm at 60° of supination (p = 0.036). There were no differences found for pronation or neutral forearm positioning (p > 0.235). Flexion force efficiency was not significantly different between the trough and anatomic repair groups. The average tuberosity distance was 11.0 ± 2.1 mm for the anatomic repairs and 8.3 ± 1.4 mm for the trough repairs (p = 0.003). The percentage of distance lost due to the trough was 25%. Furthermore, the supination moment arm in the supinated position was significantly correlated with the tuberosity distance. CONCLUSIONS: The trough technique resulted in a significant decrease (p = 0.036) in the moment arm of a 60° supinated forearm and a significant reduction (p = 0.003) in radial tuberosity height. The loss of the supination moment arm was correlated with the decrease in tuberosity height, providing evidence that the radial protuberance acts as a mechanical cam. CLINICAL RELEVANCE: The anterior protuberance of the radial tuberosity functions as a supination cam; therefore, consideration should be given to preserve its topographical anatomy during a distal biceps repair.

Quadrupled Hamstring Graft Strength as a Function of Clinical Sizing.

PURPOSE: This study sought to compare the strength of quadrupled hamstring tendon (QHT) grafts of 6 to 9.5 mm in clinical diameter with that of 10-mm bone-patellar tendon-bone (BPTB) grafts. METHODS: Twenty cadaveric semitendinosus and gracilis tendons were combined into QHT grafts. These were sized using a standard graft-sizing device and an area micrometer, yielding grafts ranging from 6 to 9.5 mm in diameter. The grafts were tested to failure. Five 10-mm BPTB grafts were also sized and tested. RESULTS: Clinical sizing did predict the strength of the graft but not profoundly. As a material alone, without consideration of fixation in bone tunnels, QHT grafts were stronger than BPTB grafts. Graft strength decreased with size, but a linear relation between strength and diameter (r(2) = 0.715, P < .001) was found to be as good as the expected quadratic fit (r(2) = 0.709). Compared with BPTB grafts, even the smallest QHT grafts (diameter <6.5 mm) were still significantly stronger than 10-mm BPTB grafts (P = .004). The elastic moduli of the QHT and BPTB grafts were 761 ± 187 MPa and 615 ± 403 MPa, respectively; elongations at failure were 12.0% ± 2.0% and 7.5% ± 1.6%, respectively; and failure stresses were 105 ± 18 MPa and 50 ± 14 MPa, respectively. CONCLUSIONS: This work shows that a clinical size of QHT grafts of 6 mm in diameter is not a concern regarding the strength itself. For a possible lower-end prediction of acceptable size, assuming that a gracilis-semitendinosus graft would have only the stress of the weakest measured QHT graft of 88 MPa, a graft of 5.5 mm in diameter would suffice, having more strength in newtons than the average patellar tendon. CLINICAL RELEVANCE: Clinically sized QHT grafts have a higher failure strength than 10-mm patellar tendon grafts. Therefore the strength of the graft cannot account for the higher clinical failure rates of smaller hamstring grafts in active patients in clinical studies.

Effect of lesser tuberosity osteotomy size and repair construct during total shoulder arthroplasty.

BACKGROUND: Lesser tuberosity osteotomy has been shown to decrease postoperative subscapularis dysfunction. The purpose of this study was to determine the effect of osteotomy thickness and suture configuration on repair integrity. MATERIALS AND METHODS: One side of 12 matched-pair cadaveric shoulders was randomly assigned to either a thick osteotomy (100% of lesser tuberosity height) or a thin osteotomy (50% of height). Both sides of the matched pairs were given the same repair, either (1) compression sutures or (2) compression sutures plus 1 tension suture. This created 4 groups of 6 paired specimens. Computed tomography imaging was used to measure tuberosity dimensions before and after osteotomy to validate fragment height and area. The repairs were loaded cyclically and then loaded to failure. A video system measured fragment displacement. The percent area of osteotomy contact was calculated from the computed tomography and displacement data. RESULTS: The average initial displacement was less in the thin osteotomy groups (P = .011). Adding a tension suture negated this difference. A significant number of thin repair sites compared with thick repair sites remained intact during load-to-failure testing (P = .001). No difference occurred because of maximum load between the repair groups (P = .401), and construct stiffness was greater when a tension suture was used (P = .032). The percent area of osteotomy contact showed no differences between the osteotomy (P = .431) and repair (P = .251) groups. CONCLUSION: The study showed that thin osteotomies displaced less than thick osteotomies. Adding a tension band improved construct stability and eliminated some failure modes. Our ideal repair was a thin wafer with both tension and compression sutures. This construct had smaller total displacement, a high osteotomy percent contact area, and a high maximum load.

Factors affecting supination strength after a distal biceps rupture.

HYPOTHESIS: This study quantified pain (visual analog pain scale [VAPS]), disability (Disabilities of the Arm, Shoulder and Hand [DASH]) and isometric supination torque at 3 forearm positions in a prospective cohort of biceps-deficient arms to assess the potential for functional return with nonoperative treatment. MATERIALS AND METHODS: Twenty-three men (50 ± 11 years) with complete unilateral distal biceps avulsion underwent isometric supination strength testing of both limbs at 60° of supination, 0° (neutral), and 60° of pronation. After exclusion of 1 outlier patient, the mean time from injury to evaluation was 44 days (range, 4-455 days). Pain level (VAPS) and functional outcome (DASH) were assessed; supination strength was normalized to the uninjured arm. RESULTS: The uninjured arm was stronger (P < .001), and peak torque varied with forearm position (P < .043). Peak torque was greater in pronation compared with supination, regardless of injury (P < .002). No differences were detected in supination strength as a result of forearm position or arm dominance. Supination strength did not correlate with time from injury to evaluation. One patient regained supination strength (115%) at 60° of pronation and 72% in neutral with a lengthy time from injury. VAPS (5 of 10) and DASH (39 of 100) scores decreased with time and did not relate to supination strength. CONCLUSION: Biceps tendon rupture led to a 60% decrease in supination strength in the neutrally oriented forearm. Peak torque observations can be explained using forearm moment arms. VAPS and DASH scores decreased with time but did not affect strength. We speculate that supination strength from pronation to neutral can improve as one strengthens the brachioradialis but strength deficits from neutral to supination are more difficult to overcome.

Subsidence in two uncemented femoral stems: an in vitro study.

Many aspects of the performance of different implant designs remain as open questions in total hip arthroplasty. Despite the increased survivorship of each hip replacement, the amount of bone removed during surgery remains an important factor because of the potential need for revision surgery. Given that a smaller implant will have less surface area over which to transfer load, constructs that preserve more bone stock may be susceptible to mechanical complications related to the fixation of the implant in the femur. To assess mechanical fixation, this study compared the fiber metal taper and Mayo conservative hip stems in subsidence, frontal plane rotation and failure load. After dual-energy x-ray absorptiometry scans, pairs of cadaveric femurs received implants of each type and were loaded for 10,000 cycles. The subsidence and rotation were measured. Finally, specimens were loaded to failure. The subsidence and rotation after cyclic loading were -0.73 mm and 0.1°, respectively, for the Mayo implants and -0.87 and 0.52°, respectively, for the fiber metal taper implants, but no significant differences between implant types were found. There was also no significant relationship to bone mineral density. A power analysis revealed that 914 specimens would have been required to achieve a power of 0.8.

Repaired distal biceps magnetic resonance imaging anatomy compared with outcome.

BACKGROUND: This study examined the magnetic resonance imaging (MRI) appearance of an anterior incision distal biceps tendon repair and evaluated the association between appearance and outcome. MATERIALS AND METHODS: Nineteen patients were randomly recruited to undergo an elbow MRI from a single-surgeon series of distal biceps repairs using an anterior approach. Tendon healing was evaluated by the integrity of the repair, the amount of heterogeneity within the tendon substance, and the presence of heterotopic bone. The angle of tendon insertion on the tuberosity was used to quantify the tendon location from the MRI in the patients and in 10 healthy volunteers. All patients completed the Disabilities of Arm, Shoulder and Hand (DASH) and a visual analog pain scale (VAPS), and 17 patients underwent isometric supination strength testing. MRI findings were statistically compared with the outcome scores. RESULTS: All of the repairs healed to cortical bone. High intrasubstance heterogeneity or heterotopic bone was present in 11 patients (58%). The insertion site angle of the repaired tendons was 73° more anterior than the uninjured controls (P < .001). Average DASH was 7.7 (range, 0-49.2) and VAPS was 0.7 (range, 0-5). At 60° of forearm supination, supination strength was 67% of the uninjured side (P < .01). No significant differences in DASH or VAPS scores were found between groups based on tendon appearance. CONCLUSIONS: The distal biceps tendon predictably heals to cortical bone but demonstrates a wide variability in overall morphology that does not influence DASH or VAPS scores. A significant decrease in strength at 60° of supination appears to be an effect of an anterior tendon reattachment location.

Anatomic and biomechanical analysis of the short and long head components of the distal biceps tendon.

HYPOTHESIS: The short head bundle of the distal biceps tendon is more efficient at elbow flexion, and the long head is more efficient at forearm supination. METHODS: The short and long head bundles of the distal biceps tendon were separated to the bicipital tuberosity in 6 cadavers. The area and centroid of each bundle insertion were computed from surface points measured within each footprint. Each bundle was individually loaded. The supination torque and flexion load generated were recorded at 90° of elbow flexion. The slope of the torque generated versus biceps load was used to define the supination moment arm. The ratio of the flexion load generated to biceps load applied was used to define the relative flexion efficiency. RESULTS: The short head insertion was positioned distal and anterior relative to the long head and typically included the apex of the tuberosity. The areas of the long and short heads were 59 ± 15 and 94 ± 44 mm(2) (P = .07), respectively. The long head moment arm was significantly higher in supination. The short head had a significantly higher moment arm in neutral and pronation. The ratio of the flexion load to biceps load was 15% higher for the short head. CONCLUSION: The short and long heads of the biceps have distinct insertions. The short head's insertion allows it to be relatively more efficient at elbow flexion at 90°. In the neutral and pronated forearm, the short head is the relatively more efficient supinator. In the supinated forearm, the long head becomes relatively more efficient at supination.

The effect of biceps reattachment site.

BACKGROUND: We hypothesize that an anatomic repair of the distal biceps tendon would recreate native tendon moment arm and forearm rotation, while a nonanatomic insertion would compromise moment arm and forearm rotation. METHODS: Isometric supination torque was measured at 60° of pronation, neutral, and 60° of supination for the native distal biceps tendon and 4 repair points in 6 cadaveric specimens using a computer controlled elbow simulator. The slope of the regression line fitted to the torque versus biceps load data was used to define the moment arm for each attachment location. Range of motion testing was performed by incrementally loading the biceps, while measuring the supination motion generated using a digital goniometer. RESULTS: Tendon location and forearm position significantly affected the moment arm of the biceps (P < .05). Anatomic repair in all forearm positions showed no significant difference from the native insertion. Moment arm for an anterior center repair was significantly lower in supination (-97%) and neutral (-27%) and also produced significantly less supination motion. No difference was observed between all tendon locations in pronation. CONCLUSIONS: Reattachment of the biceps to its anatomic location, as opposed to a more anterior central position, is critical in reestablishing native tendon biomechanics. Clinically, these findings would suggest that patients with a biceps repair might experience the most weakness in a supinated position without experiencing a deficit in the pronated forearm.

Effects of radiofrequency probe application on irrigation fluid temperature in the wrist joint.

PURPOSE: Radiofrequency (RF) probes used in wrist arthroscopy may raise joint fluid temperature, increasing the risk of capsular and ligamentous damage. The purposes of the current study were to measure joint fluid temperature during wrist arthroscopy with the use of RF probes, and to determine whether using an outlet portal will reduce the maximum temperature. METHODS: We performed wrist arthroscopy on 8 cadaveric arms. Ablation and coagulation cycles using RF probe were performed at documented locations within the joint. This was done for 60-second intervals on both the radial and ulnar side of the wrist, to mimic clinical practice. We used 4 fiberoptic phosphorescent probes to measure temperature (radial, ulnar, inflow-tube, and outflow-tube probes) and measured joint fluid temperature with and without outflow. RESULTS: There was a significant difference between wrists with and without outflow when examining maximum ablation temperatures (p < .002). All specimens showed higher maximum and average ablation temperatures without outflow. Maximum joint temperatures, greater than 60 degrees C, were observed in only no-outflow conditions. CONCLUSIONS: In performing RF ablation during wrist arthroscopy, the use of an outlet portal reduces the joint fluid temperature. Without an outlet portal, maximum temperatures can exceed desirable levels when using ablation; such temperatures have the potential to damage adjacent tissues. It is useful to maintain adequate outflow when using the radiofrequency probes during wrist arthroscopy.

The effect of the annular ligament on kinematics of the radial head.

PURPOSE: There is evidence that the radial head translates during pronation and supination. This study measured radial head movement and the location of the pronation-supination axis of the forearm with and without the annular ligament. METHODS: Thirteen cadaveric arms were attached to a custom-built frame. Pronation and supination were achieved by actuation of the pronator teres and biceps tendons, respectively. Motion was captured by video cameras via marker arrays attached to the distal radius, distal ulna, humerus, and radial head. Three pronation-supination trials were performed with the annular ligament intact and the elbow positioned at 90 degrees . The sequence was repeated after transection of the annular ligament. RESULTS: The radial head traveled an average of 2.1 mm in the anteroposterior direction and 1.6 mm in the mediolateral direction during forearm rotation. After annular ligament resection, travel of the radial head increased by an average of 44% in the mediolateral direction and by 24% in the anteroposterior direction. On average, the mean pronation-supination axis (screw displacement axis) passed 1.4 mm +/- 1.9 medial to the center of the capitellum and through the center of the ulnar head. Loss of the annular ligament did not change the location of the pronation-supination axis. CONCLUSIONS: During forearm rotation, the radial head travels to a greater extent in the anteroposterior direction than in the mediolateral direction. Loss of the stabilizing effect of the annular ligament increases the travel mediolaterally more than anteroposteriorly. The pronation-supination axis of the forearm is nearly constant and is not affected by annular ligament transection.