Inhalation exposure to toxic heavy metals in nail salon technicians and health risk assessment using Monte Carlo simulation.

OBJECTIVE: Nail salons offer a developing and diverse occupation for many women, especially the new generation. Due to the increasing apprehension surrounding heavy metals in dust caused by filing nails containing dried nail polish, the present study was designed aimed to health risk assessment of heavy metals in breathing zone of nail salon technicians (NSTs). METHODS: This is a cross-sectional study that was conducted in NSTs. The concentration of Cadmium (Cd), Lead (Pb), Nickel (Ni), Chromium (Cr) and Manganese (Mn)in breathing zone of 20 NSTs was determined using ICP-OES. RESULTS: The metal concentrations were in the following order: Mn > Pb > Ni > Cr > Cd with corresponding arithmetic mean values of0.008, 0.0023, 0.0021, 0.001 and 0.0006 mg m-3, respectively, which are exceeded the recommended levels stated in the indoor air guidelines. The average lifetime carcinogenic risk (LCR) for Cr, Cd, Ni and Pb was calculated 0.0084, 0.00054, 0.00026 and 1.44 E - 05, respectively. The LCR values of all metals (except Pb) exceeded the acceptable level set by the USEPA. The mean of Hazard quotients (HQ) for Mn, Cd, Cr, Ni and Pb were calculated to be23.7, 4.74, 2.19, 0.51 and 0.0.24, respectively. The sensitivity analysis showed that, the exposure frequency (EF) for Cr and Ni had the strong effects on generation of both LCR and HQ. Furthermore, the concentrations of Mn, Cd and Pb had strong impacts on the HQ generation and the concentration of Cd and Pb had main effects on LCR generation. CONCLUSION: To effectively reduce pollutant concentration, it is recommended to install a ventilation system near nail salon work tables and conduct continuous monitoring and quality control of nail products.

Assessing the health risks of dermal exposure to heavy metals dust among nail salon technicians.

BACKGROUND: Nail salon technicians are susceptible to potential exposure to a diverse array of hazardous chemicals in the form of dust or vapors. One of the main routes of exposure is dermal contact. OBJECTIVE: The aim of present study was to health risk assessment of dermal exposure to dust containing heavy metals in nail salon technicians. METHODS: Dust sampling was done on the work surface of 20 available nail salon technicians. The concentration of five metals including cadmium, lead, chromium, nickel, and manganese were determined using ICP-MS. Afterwards, the United States Environmental Protection Agency (USEPA) guideline was used to estimate the potential health risks, including carcinogenic and non-carcinogenic risks, associated with the analyzed metals. RESULTS: Results indicated the mean concentrations of Pb, Cd, Ni, Cr and Mn were 0.7953±0.4373, 0.0952±0.0264, 0.7666±0.8629, 0.4900±0.5994 and 1.134±0.4736, respectively. The hazard quotient (HQ) of all metals was within the permissible value, while hazard index (HI) was greater than 1. The probability of cancer risk (CR) resulting from dermal exposure to Ni, Cd and Cr exceeded the acceptable risk levels (10-6-10-4), but CR calculated for Pb was less than allowable value. CONCLUSION: Implementation of engineering controls such as downdraft vented nail tables and portable source capture systems is necessary. Besides, the use of personal protective equipment such as disposable nitrile gloves, N95 respirator masks, and ensuring proper training on safe work practices is recommended.