The Posterior Triangle and Posterior Muscles of the Neck in 3-Dimensions: Creating a Digital Anatomic Model Using Peer-Reviewed Literature, Radiographic Imaging, and an Experienced Medical Illustrator.

INTRODUCTION: The posterior cervical triangle houses an important nodal basin in the spread of several cancers in the head and neck, particularly cutaneous malignancies of the scalp. A safe and effective Level V neck dissection necessitates thorough understanding of the neurovascular structures housed within the region. Conventional 2D anatomical representations offer insights into the named structures, but fall short in illustrating the spatial relationships crucial in surgery. Here, we aim to develop an anatomically-precise 3D virtual model of the posterior cervical triangle and its constituent structures. METHODS: Musculature and neurovasculature were segmented from the computerized tomography (CT) angiogram of a healthy 29-year-old female. Literature review of cadaveric studies was performed to identify the most common variants, relevant surgical relationships, and usual dimensions of structures contained in the model. Structures unable to be visualized on imaging were created de novo using data obtained in the literature review. A medical illustrator then used this data to develop a 3D anatomical model using ZBrush. RESULTS: The musculature (sternocleidomastoid, trapezius, omohyoid, scalenes, erector spinae, and transversospinalis muscles) and neurovasculature (spinal accessory nerve, phrenic nerve, vertebral artery, subclavian artery, and brachial plexus) were characterized through literature review. Musculature and vasculature were segmented from CT angiography while neural structures were created de novo. Both radiographic and anatomic data were used to inform the creation of a 3D model, which will be uploaded to an online database for open access viewing. CONCLUSIONS: A dynamic understanding of the spatial relationships existing among structures housed within the posterior triangle of the neck is imperative when operating in the region. The development of an accurate 3D anatomical model of such structures based upon predominant variants found in the literature will supplement the education of practicing and aspiring head and neck surgeons.

Combined endoscopic endonasal and contralateral transmaxillary approach for resection of an anterior petrous chondrosarcoma: a 2-dimensional operative video.

The contralateral transmaxillary corridor improves access to anterior petrous apex lesions back to the level of the internal auditory canal without the need to mobilize the paraclival internal carotid artery. In this video, we present the case of 31-yo female that presented with new left abducens palsy during pregnancy. Imaging revealed a heterogeneous enhancing extradural mass within the left petrous apex region extending posterior to the horizontal segment of the petrous internal carotid artery, consistent with chondrosarcoma. Chondrosarcomas are the 2nd most common osseous malignancy but only consist of 0.2% of all intracranial tumors1,2. They are thought to derive from persistent cartilaginous rests retained after endochondral ossification 3. Given that surgery is a mainstay of treatment 4,5,6, a combined endoscopic endonasal and contralateral transmaxillary approach was selected to achieve maximal resection. The patient consented to the procedure. A complete resection of the mass was performed with pathology demonstrating a grade 2 chondrosarcoma. The patient tolerated the procedure without any complications, the left abducens palsy resolved in follow-up by 3 weeks, and a multidisciplinary tumor board recommended postoperative observation without adjuvant therapy7. An endoscopic endonasal and contralateral transmaxillary approach is a feasible option for petrous apex lesions such as chondrosarcoma.

Hyoid Position and Aging: A Comprehensive Analysis Using AI-assisted Segmentation of 282 Computed Tomography Scans.

Background: With neck, aging the cervicomental angle becomes obtuse and may be influenced by hyoid bone aging. An understanding of hyoid position changes with aging will further our understanding of its role in neck contour changes. Methods: A 3D volumetric reconstruction of 282 neck computed tomography scans was performed. The cohort was categorized into three groups based on age: 20 years or older and younger than 40 years, 40 years or older and younger than 60 years, and 60 years or older and younger than 80 years. The vertical and horizontal hyoid distances in relation to the mandible were calculated for each patient. Results: A total of 282 patients (153 women, 129 men) were included in the cohort. The age groups were evenly distributed in men and women. Mean hyoid vertical and horizontal distances differed between women and men in all age groups. There was a significant difference in the hyoid vertical distance between 20-39 years old to 40-59 years old in men (P < 0.01), and 20-39 years old to 60-79 years old in both genders (women P = 0.005, men P < 0.01). Hyoid horizontal distance was not affected by age and sex (age and sex: P > 0.05), but rather by body mass index (BMI). Every 5 BMI points corresponded to a forward movement of 2 mm. Conclusions: As individuals age, the hyoid bone descends in both sexes, and an increase in BMI is associated with forward movement. Additional studies are needed to assess the correlation of the hyoid position between upright and supine positions.

Utility of 3D-Printed Models in the Surgical Planning for Primary Spine Tumors: A Survey of International Spinal Oncology Experts.

STUDY DESIGN: Survey study. OBJECTIVES: The purpose of this study was to characterize the utility of 3D printed patient specific anatomic models for the planning of complex primary spine tumor surgeries. METHODS: A survey of individual members of an international study group of spinal oncology surgeons was performed. Participants were provided a clinical vignette, pathologic diagnosis, and pre-operative imaging for three primary spinal oncology cases. Study participants provided a free text surgical plan for resection and were then presented an associated 3D printed model for each case and asked to re-evaluate their surgical plan. RESULTS: Ten spinal oncology surgeons participated in the study, representing nine institutions across five countries. Four of the surgeons (40%) made significant changes to their surgical plan after reviewing the 3D models, including sacrifice of an additional nerve root to obtain negative margins, sparing an SI joint that was originally planned for inclusion in the en bloc resection, adjusting the location of osteotomy cuts, changes to the number of surgical stages and/or staging order, and preservation of neurology that was originally planned for sacrifice. The overall impression of the 3D models was positive, with 90% of the participants stating they found the 3D model useful in developing a surgical plan. CONCLUSIONS: Surgical planning for resection of primary spinal column tumors is challenging and time intensive. 3D printed patient specific surgical models may be an additional tool that can augment surgical planning and execution by improving the chance of accomplishing surgical resection goals and minimizing morbidity.

Mandibular Gender Dimorphism: The Utility of Artificial Intelligence and Statistical Shape Modeling in Skeletal Facial Analysis.

BACKGROUND: In gender-affirming surgery, facial skeletal dimorphism is an important topic for every craniofacial surgeon. Few cephalometric studies have assessed this topic; however, they fall short to provide skeletal contour insights that direct surgical planning. Herein, we propose statistical shape modeling (SSM) as a novel tool for investigating mandibular dimorphism for young white individuals. METHODS: A single-center, retrospective study was performed using computed tomography (CT) scans of white individuals, aged 20 to 39 years old. AI-assisted, three-dimensional (3D) mandibles were reconstructed in Materialise Mimics v25.0. We used SSM to generate average 3D models for both genders. Relevant manual anthropometric measurements were taken for the SSMs and individual mandibles. Contour disparities were then represented using 3D overlays and heatmaps. Statistical analyses were performed using unpaired student t testing or Wilcoxon signed rank testing with 95% confidence interval as deemed appropriate by population-level normality assessment. RESULTS: Ninety-eight patients (53 females, 45 males) were included. Male mandibles showed greater bigonial width, intercondylar width, ramus height, and body length [p<0.005]. There was no statistically significant difference in the gonial angle measurements [p=0.62]. All relevant manual individual measurements demonstrated excellent concordance to their SSM counterparts. The 3D overlays of SSMs revealed squarer male chins with more lateral but less anterior projection than their female counterparts. Also, the female mandibles showed smoother transition at the gonial angle. CONCLUSIONS: SSM provides a novel tool to objectively evaluate volumetric and contour dimorphisms between genders. Moreover, this method can be automated, allowing for expedited comparisons between populations of interest compared to manual assessment. LEVEL OF EVIDENCE III: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors   www.springer.com/00266 . Bullet points about the importance of this work: Advancing Anthropometric Assessment: Statistical shape modeling (SSM) offers a cutting-edge approach to visualizing gender-specific skeletal anatomic differences for aesthetic and gender-affirming facial surgery. Expediting Comparative Analysis: The workflow established in this paper streamlines the evaluative process, enabling rapid morphologic comparisons between populations. Patient-Centered Care: This study establishes a foundation for the development of SSMs in individualized operative planning.

Minibeam Radiation Therapy Treatment (MBRT): Commissioning and First Clinical Implementation.

PURPOSE: Minibeam radiation therapy (MBRT) is characterized by the delivery of submillimeter-wide regions of high "peak" and low "valley" doses throughout a tumor. Preclinical studies have long shown the promise of this technique, and we report here the first clinical implementation of MBRT. METHODS AND MATERIALS: A clinical orthovoltage unit was commissioned for MBRT patient treatments using 3-, 4-, 5-, 8-, and 10-cm diameter cones. The 180 kVp output was spatially separated into minibeams using a tungsten collimator with 0.5 mm wide slits spaced 1.1 mm on center. Percentage depth dose (PDD) measurements were obtained using film dosimetry and plastic water for both peak and valley doses. PDDs were measured on the central axis for offsets of 0, 0.5, and 1 cm. The peak-to-valley ratio was calculated at each depth for all cones and offsets. To mitigate the effects of patient motion on delivered dose, patient-specific 3-dimensional-printed collimator holders were created. These conformed to the unique anatomy of each patient and affixed the tungsten collimator directly to the body. Two patients were treated with MBRT; both received 2 fractions. RESULTS: Peak PDDs decreased gradually with depth. Valley PDDs initially increased slightly with depth, then decreased gradually beyond 2 cm. The peak-to-valley ratios were highest at the surface for smaller cone sizes and offsets. In vivo film dosimetry confirmed a distinct delineation of peak and valley doses in both patients treated with MBRT with no dose blurring. Both patients experienced prompt improvement in symptoms and tumor response. CONCLUSIONS: We report commissioning results, treatment processes, and the first 2 patients treated with MBRT using a clinical orthovoltage unit. While demonstrating the feasibility of this approach is a crucial first step toward wider translation, clinical trials are needed to further establish safety and efficacy.

Patient-specific Implants Improve Volumetric Surgical Accuracy Compared to Stock Reconstruction Plates in Modern Pardigm Virtual Surgical Planning of Fibular Free Flaps for Head and Neck Reconstruction.

BACKGROUND: Virtual surgical planning (VSP) for composite microvascular free flaps has become standard of care for oncologic head and neck reconstruction. Controversy remains as to the use of three-dimensional (3D)-printed patient-specific titanium implants (PSIs) versus hand-bent stock reconstruction plates. Proponents of PSIs cite improved surgical accuracy, reduced operative times, and improved clinical outcomes. Detractors purport increased cost associated with PSIs and presumed equivalent accuracy with less expensive stock plates. PURPOSE: The study purpose was to measure and compare the 3D-volumetric accuracy of PSI versus stock reconstruction plates among subjects undergoing VSP-guided mandibular fibular free flap reconstruction. STUDY DESIGN, SETTING, SAMPLE: A retrospective cohort study of subjects undergoing VSP-guided fibular free flap reconstructions at Mayo Clinic between 2016 and 2023 was performed. Subjects were excluded for non-VSP guidance, midfacial reconstruction, nonfibular free flaps, and lack of requisite study variables. PREDICTOR VARIABLE: The primary predictor was the type of reconstruction plate utilized (PSI vs stock plate). MAIN OUTCOME VARIABLE: The main outcome was volumetric surgical accuracy of the final reconstruction compared to the preoperative surgical plan by root mean square error (RMSE) calculation. Lower RMSE values indicated a higher surgical accuracy. COVARIATES: Covariates included age, sex, race, smoking status, American Society of Anesthesiologists (ASA) Physical Status Classification System, Charlson Comorbidity Index, preoperative diagnosis, and number of fibular segments. ANALYSES: Differences in surgical accuracy were assessed between preoperative and postoperative segmented scans using volumetric overlays from which RMSE values were calculated. Univariate and multivariate modeling of plate type to RMSE calculation was performed. Statistical significance set to P < .05. RESULTS: Total of 130 subjects were identified, 105 PSI and 25 stock plates. Calculated mean RMSE in millimeters (mm) for stock plates was 1.46 (standard deviation: 0.33) and 1.15 (standard deviation: 0.36) for PSIs. Univariate modeling demonstrated a statistically significant difference in RMSE of 0.31 (95% confidence interval: 0.16-0.47) (P < .001) equating to a 21.2% (P < .001) improved volumetric surgical accuracy for PSIs. The association of improved volumetric accuracy with PSIs has been maintained in all multivariate models controlling for confounding. CONCLUSION AND RELEVANCE: In modern era VSP-guided head and neck fibular free flap reconstruction, patient-specific 3D-printed titanium implants confer a statistically significant improvement in volumetric surgical accuracy over stock reconstruction plates.

Extraocular muscle electromyographic recordings for intraoperative monitoring of cranial nerves III, IV, and VI: a single-center experience with intraorbital electrodes.

OBJECTIVE: The objective of this study was to describe the quantitative features of intraoperative electromyographic recordings obtained from cranial nerve III, IV, and VI neuromonitoring using 25-mm intraorbital electrodes, in the larger context of demonstrating the practicality of this technique during neurosurgical cases. METHODS: A 25-mm-long shaft-insulated intraorbital needle electrode is routinely used at the authors' institution for extraocular muscle (EOM) electromyographic monitoring of the inferior rectus, superior oblique, and/or lateral rectus muscles when their function is at risk. Cases monitored between January 1, 2021, and December 31, 2022, were reviewed for patient demographics, tumor location and pathology, EOMs monitored, pre- and postoperative examination, and complications from electrode placement. Compound muscle action potentials on triggered electromyography, as well as neurotonic discharges on free-run electromyography, were described quantitatively. RESULTS: There were 141 cases in 139 patients reviewed during the 24-month time span, with 278 EOMs monitored (inferior rectus/superior oblique/lateral rectus muscles 68/68/142). Triggered electromyography yielded biphasic or triphasic compound muscle action potentials from EOMs with a mean onset latency of 1.51 msec (range 0.94-3.22 msec), mean maximal peak-to-trough amplitude of 1073.93 µV (range 76.75-7796.29 µV), and high specificity for the channel in nearly all cases. Neurotonic discharges were recorded in 30 of the 278 EOMs (with all 3 muscles represented) and associated with a greater incidence of new or worsened ophthalmoparesis (OR 4.62, 95% CI 1.3-16.4). There were 2 cases of small periorbital ecchymosis attributed to needle placement; additionally, 1 case of needle-related intraorbital hematoma occurred after the review period. CONCLUSIONS: The 25-mm shaft-insulated intraorbital electrode facilitates robust and consistent electromyographic recordings of EOMs that are advantageous over existing techniques. Combined with the relative ease of needle placement and low rate of complications, the technique is practical for neuromonitoring during craniotomies.

Assessment of minimum target dose as a predictor of local failure after spine SBRT.

OBJECTIVES: Metastasis-directed stereotactic body radiation therapy (SBRT) has demonstrated robust clinical benefits in carefully selected patients, improving local control and even overall survival (OS). We assess a large database to determine clinical and dosimetric predictors of local failure after spine SBRT. METHODS: Spine SBRT treatments with imaging follow-up were identified. Patients were treated with a simultaneous integrated boost technique using 1 or 3 fractions, delivering 20-24 Gy in 1 fraction to the gross tumor volume (GTV) and 16 Gy to the low dose volume (or 27-36 Gy and 21-24 Gy for 3 fraction treatments). Exclusions included: lack of imaging follow-up, proton therapy, and benign primary histologies. RESULTS: 522 eligible spine SBRT treatments (68 % single fraction) were identified in 377 unique patients. Patients had a median OS of 43.7 months (95 % confidence interval: 34.3-54.4). The cumulative incidence of local failure was 10.5 % (7.4-13.4) at 1 year and 16.3 % (12.6-19.9) at 2 years. Local control was maximized at 15.3 Gy minimum dose for single-fraction treatment (HR = 0.31, 95 % CI: 0.17 - 0.56, p < 0.0001) and confirmed via multivariable analyses. Cumulative incidence of local failure was 6.1 % (2.6-9.4) vs. 14.2 % (8.3-19.8) at 1 year using this cut-off, with comparable findings for minimum 14 Gy. Additionally, epidural and soft tissue involvement were predictive of local failure (HR = 1.77 and 2.30). CONCLUSIONS: Spine SBRT offers favorable local control; however, minimum dose to the GTV has a strong association with local control. Achieving GTV minimum dose of 14-15.3 Gy with single fraction SBRT is recommended whenever possible.

Resection of a Solitary Right Ventricular Metastasis in Oligorecurrent Hepatocellular Carcinoma.

Hepatocellular carcinoma (HCC), constituting the predominant manifestation of liver cancer, stands as a formidable medical challenge. The prognosis subsequent to surgical intervention, particularly for individuals presenting with a solitary tumor, relies heavily on the degree of invasiveness. The decision-making process surrounding therapeutic modalities in such cases assumes paramount importance. This case report illuminates a rather unusual clinical scenario. Here, we encounter a patient who, following a disease-free interval, manifested an atypical presentation of HCC, specifically, a solitary cardiac metastasis. The temporal interval of remission adds an additional layer of complexity to the case. Through a multidisciplinary planning process, the decision was made for surgical removal of the metastatic tumor.

Clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: neurosurgical and otolaryngologic conditions.

BACKGROUND: Medical three dimensional (3D) printing is performed for neurosurgical and otolaryngologic conditions, but without evidence-based guidance on clinical appropriateness. A writing group composed of the Radiological Society of North America (RSNA) Special Interest Group on 3D Printing (SIG) provides appropriateness recommendations for neurologic 3D printing conditions. METHODS: A structured literature search was conducted to identify all relevant articles using 3D printing technology associated with neurologic and otolaryngologic conditions. Each study was vetted by the authors and strength of evidence was assessed according to published guidelines. RESULTS: Evidence-based recommendations for when 3D printing is appropriate are provided for diseases of the calvaria and skull base, brain tumors and cerebrovascular disease. Recommendations are provided in accordance with strength of evidence of publications corresponding to each neurologic condition combined with expert opinion from members of the 3D printing SIG. CONCLUSIONS: This consensus guidance document, created by the members of the 3D printing SIG, provides a reference for clinical standards of 3D printing for neurologic conditions.

3D Printed Models of Trochlear Dysplasia and Trochleoplasty Simulation for Trainee Education.

Trochlear dysplasia is a major contributor to patellofemoral instability and subsequent failure of isolated soft tissue reconstruction procedures in the treatment of recurrent patellar dislocation and/or subluxation. Trochleoplasty procedures aim to address abnormal osseous trochlear morphologic factors that contribute to patellar maltracking. However, teaching these techniques is limited by the lack of reliable training models for trochlear dysplasia and trochleoplasty simulation. Although a cadaveric knee model of trochlear dysplasia for trochleoplasty simulation has been recently described, cadaveric knees are less amenable for use in trochleoplasty planning and surgeon training because of the absence of reliable, natural dysplastic anatomic relationships, such as suprapatellar spurs due to the rarity of dysplastic cadavers and the high cost of cadaveric specimens. Furthermore, readily available sawbone models represent "normal" osseous trochlear morphology and are difficult to modify and bend due to their material composition. Given this, we have developed a cost-effective, reliable, and anatomically accurate three-dimensional (3D) knee model of trochlear dysplasia for trochleoplasty simulation and trainee education.

The Role of 3D Printing in Treatment Planning of Spine and Sacral Tumors.

Three-dimensional (3D) printing technology has proven to have many advantages in spine and sacrum surgery. 3D printing allows the manufacturing of life-size patient-specific anatomic and pathologic models to improve preoperative understanding of patient anatomy and pathology. Additionally, virtual surgical planning using medical computer-aided design software has enabled surgeons to create patient-specific surgical plans and simulate procedures in a virtual environment. This has resulted in reduced operative times, decreased complications, and improved patient outcomes. Combined with new surgical techniques, 3D-printed custom medical devices and instruments using titanium and biocompatible resins and polyamides have allowed innovative reconstructions.

A Radiologist's Guide to the 2021 WHO Central Nervous System Tumor Classification: Part 2-Newly Described and Revised Tumor Types.

The fifth edition of the World Health Organization classification of tumors of the central nervous system (CNS), published in 2021, introduces major shifts in the classification of brain and spine tumors. These changes were necessitated by rapidly increasing knowledge of CNS tumor biology and therapies, much of which is based on molecular methods in tumor diagnosis. The growing complexity of CNS tumor genetics has required reorganization of tumor groups and acknowledgment of new tumor entities. For radiologists interpreting neuroimaging studies, proficiency with these updates is critical in providing excellent patient care. This review will focus on new or revised CNS tumor types and subtypes, beyond infiltrating glioma (described in part 1 of this series), with an emphasis on imaging features.

Development and validation of a unifying pre-treatment decision tool for intracranial and extracranial metastasis-directed radiotherapy.

Background: Though metastasis-directed therapy (MDT) has the potential to improve overall survival (OS), appropriate patient selection remains challenging. We aimed to develop a model predictive of OS to refine patient selection for clinical trials and MDT. Patients and methods: We assembled a multi-institutional cohort of patients treated with MDT (stereotactic body radiation therapy, radiosurgery, and whole brain radiation therapy). Candidate variables for recursive partitioning analysis were selected per prior studies: ECOG performance status, time from primary diagnosis, number of additional non-target organ systems involved (NOS), and intracranial metastases. Results: A database of 1,362 patients was assembled with 424 intracranial, 352 lung, and 607 spinal treatments (n=1,383). Treatments were split into training (TC) (70%, n=968) and internal validation (IVC) (30%, n=415) cohorts. The TC had median ECOG of 0 (interquartile range [IQR]: 0-1), NOS of 1 (IQR: 0-1), and OS of 18 months (IQR: 7-35). The resulting model components and weights were: ECOG = 0, 1, and > 1 (0, 1, and 2); 0, 1, and > 1 NOS (0, 1, and 2); and intracranial target (2), with lower scores indicating more favorable OS. The model demonstrated high concordance in the TC (0.72) and IVC (0.72). The score also demonstrated high concordance for each target site (spine, brain, and lung). Conclusion: This pre-treatment decision tool represents a unifying model for both intracranial and extracranial disease and identifies patients with the longest survival after MDT who may benefit most from aggressive local therapy. Carefully selected patients may benefit from MDT even in the presence of intracranial disease, and this model may help guide patient selection for MDT.

Craniomaxillofacial Trauma: The Past, Present and the Future.

Reconstruction of facial trauma has seen a significant evolutionary leap in the last 100 years. The current surgical management of facial fractures was made possible by the efforts and creativity of pioneer surgeons, advances in anatomic understanding, and the continued development of biomaterials and imaging technologies. Virtual surgical planning (VSP) and 3-dimensional printing (3DP) are being incorporated into the management of acute facial trauma. The integration of this technology at the point of care is rapidly expanding globally. This article reviews the history of the management of craniomaxillofacial trauma, current practices, and future directions. The use of VSP and 3DP in facial trauma care is highlighted with a description of EPPOCRATIS, a rapid point-of-care process incorporating VSP and 3DP at the trauma center.

Thermoprotection of Neural Structures During Musculoskeletal Ablation.

Percutaneous thermal ablation is widely used for local control and palliation of a variety of lesions throughout the musculoskeletal system. In this setting, safe ablation is predicated on the avoidance of unintentional injury to vulnerable neural structures that are often in proximity to ablation targets. This article highlights key periprocedural considerations in musculoskeletal ablation and reviews the array of active and passive thermoprotective measures that are critical to safe and successful treatment.

Anatomical Step-by-Step Dissection of Complex Skull Base Approaches for Trainees: Surgical Anatomy of the Far Lateral Approach.

Introduction Skull base neuroanatomy is classically taught using surgical atlases. Although these texts are critical and rich resources for learning three-dimensional (3D) relationships between key structures, we believe they could be optimized and complemented with step-by-step anatomical dissections to fully meet the learning needs of trainees. Methods Six sides of three formalin-fixed latex-injected specimens were dissected under microscopic magnification. A far lateral craniotomy was performed by each of three neurosurgery resident/fellow at varying stages of training. The study objective was the completion and photodocumentation of the craniotomy to accompany a stepwise description of the exposure to provide a comprehensive, intelligible, and anatomically oriented resource for trainees at any level. Illustrative case examples were prepared to supplement approach dissections. Results The far lateral approach provides a wide and versatile corridor for posterior fossa operation, with access spanning the entire cerebellopontine angle (CPA), foramen magnum, and upper cervical region. Key Steps Include The study includes the following steps: positioning and skin incision, myocutaneous flap, placement of burr holes and sigmoid trough, fashioning of the craniotomy bone flap, bilateral C1 laminectomy, occipital condyle/jugular tubercle drilling, and dural opening. Conclusion Although more cumbersome than the retrosigmoid approach, a far lateral craniotomy offers unparalleled access to lesions centered lower or more medially in the CPA, as well as those with significant extension into the clival or foramen magnum regions. Dissection-based neuroanatomic guides to operative approaches provide a unique and rich resource for trainees to comprehend, prepare for, practice, and perform complex cranial operations, such as the far lateral craniotomy.

Vernix Caseosa Peritonitis Causing Acute Abdomen After Cesarean Section: A Case Series.

BACKGROUND Vernix caseosa peritonitis (VCP) is a rare complication that typically presents following an otherwise uneventful cesarean section. Leakage of vernix caseosa into the peritoneum is thought to elicit a granulomatous foreign body reaction. Symptoms can be similar to other acute abdominal conditions, and diagnosis is confirmed by intraoperative findings and histological examination. Peritoneal lavage with supportive measures is the mainstay of treatment and recovery. CASE REPORT Case 1 was a 30-year-old woman who developed right iliac fossa pain, fever, tachycardia, and tachypnea less than a week after her lower segment cesarean section (LSCS). She underwent a laparoscopy for a peritonitic abdomen and concern for intra-abdominal sepsis. A peritoneal biopsy demonstrated histological changes consistent with VCP. Case 2 was a 39-year-old woman who underwent a LSCS. After discharge, she re-presented with generalized abdominal pain. With computed tomography (CT) scan findings suggestive of appendicitis, an appendectomy was performed, and vernix caseosa was detected in all quadrants. Case 3 was a 33-year-old woman who presented with fever, vomiting, diarrhea, and iliac fossa pain 9 days following an LSCS. She was given analgesia and antibiotics for a pelvic fluid collection noted on CT scan. She re-presented with tense swelling and pain above her cesarean section incision. Laparoscopy revealed adhesions over the lower abdomen and pelvis and white plaques suggestive of vernix caseosa along the peritoneal side walls. CONCLUSIONS The rising incidence of cesarean births worldwide creates the potential for increased numbers of VCP cases. Greater recognition of VCP is warranted to prevent unnecessary procedures.