Analyzing Linear and Angular Deviations After Guided Surgery for Dental Implant Placement: A Preliminary Study.

PURPOSE: This study aimed to assess the accuracy and precision of prosthetically-driven implant placement achieved through static computer-aided implant surgery. The primary objective was to analyze the linear and angular deviations of dental implants in patients treated at a university dental clinic. Various types of surgical techniques and templates were utilized to optimize implant positioning. MATERIALS AND METHODS: A total of fiftythree dental implants were included in this study. The implants were positioned using either tooth-supported templates or tooth-tissue-supported templates with fixation pins. Two distinct guided surgery approaches were used, these being pilot drill guided and fully guided. Three-dimensional (3D) data from the implant planning phase was superimposed with the 3D data from the final implant positions using the 'Treatment Evaluation' tool within CoDiagnostix. implant planning software (Straumann AG). This enabled the automatic calculation of deviations in implant placement accuracy. RESULTS: Average angular deviation observed was 3.90 degrees. For linear deviations, the mean 3D deviation at the most coronal point of the implants was 1.04 mm, while at the implant apex it was 1.56 mm. CONCLUSION: This research demonstrates the feasibility of a digital workflow for guided implant surgery, offering a promising treatment option. Nonetheless, it is important to note that deviations do occur, with the apical region of the implant being the most affected area. Care should be taken, particularly in cases of limited bone availability.

ITI consensus report on zygomatic implants: indications, evaluation of surgical techniques and long-term treatment outcomes.

OBJECTIVES: The aim of the ITI Consensus Workshop on zygomatic implants was to provide Consensus Statements and Clinical Recommendations for the use of zygomatic implants. MATERIALS AND METHODS: Three systematic reviews and one narrative review were written to address focused questions on (1) the indications for the use of zygomatic implants; (2) the survival rates and complications associated with surgery in zygomatic implant placement; (3) long-term survival rates of zygomatic implants and (4) the biomechanical principles involved when zygoma implants are placed under functional loads. Based on the reviews, three working groups then developed Consensus Statements and Clinical Recommendations. These were discussed in a plenary and finalized in Delphi rounds. RESULTS: A total of 21 Consensus Statements were developed from the systematic reviews. Additionally, the group developed 17 Clinical Recommendations based on the Consensus Statements and the combined expertise of the participants. CONCLUSIONS: Zygomatic implants are mainly indicated in cases with maxillary bone atrophy or deficiency. Long-term mean zygomatic implant survival was 96.2% [95% CI 93.8; 97.7] over a mean follow-up of 75.4 months (6.3 years) with a follow-up range of 36-141.6 months (3-11.8 years). Immediate loading showed a statistically significant increase in survival over delayed loading. Sinusitis presented with a total prevalence of 14.2% [95% CI 8.8; 22.0] over a mean 65.4 months follow-up, representing the most common complication which may lead to zygomatic implant loss. The international experts suggested clinical recommendations regarding planning, surgery, restoration, outcomes, and the patient's perspective.

Evaluation of surgical techniques in survival rate and complications of zygomatic implants for the rehabilitation of the atrophic edentulous maxilla: a systematic review.

PURPOSE: To assess the outcome [zygomatic implant (ZI) survival] and complications of the original surgical technique (OST) and an Anatomy-Guided approach (AGA) in the placement of ZI in patients with severely atrophic maxillae. METHODS: Two independent reviewers conducted an electronic literature search from January 2000 to August 2022. The inclusion criteria were articles reporting at least five patients with severely atrophic edentulous maxilla undergoing placement OST and/or AGA, with a minimum of 6 months of follow-up. Number of patients, defect characteristics, number of ZI, implant details, surgical technique, survival rate, loading protocol, prosthetic rehabilitation, complications, and follow-up period were compared. RESULTS: Twenty-four studies comprised 2194 ZI in 918 patients with 41 failures. The ZI survival rate was 90.3-100% in OST and 90.4-100% in AGA. Probability of complications with ZI with OST was as follows: sinusitis, 9.53%; soft tissue infection, 7.50%; paresthesia, 10.78%; oroantral fistulas, 4.58%; and direct surgical complication, 6.91%. With AGA, the presenting complications were as follows: sinusitis, 4.39%; soft tissue infection, 4.35%; paresthesia, 0.55%; oroantral fistulas, 1.71%; and direct surgical complication, 1.60%. The prevalence of immediate loading protocol was 22.3% in OST and 89.6% in the AGA. Due to the heterogeneity of studies, statistical comparison was only possible after the descriptive analysis. CONCLUSIONS: Based on the current systematic review, placing ZI in severely atrophic edentulous maxillae rehabilitation with the OST and AGA is associated with a high implant survival rate and surgical complications within a minimum of 6 months follow-up. Complications, including sinusitis and soft tissue infection around the implant, are the most common. The utilization of immediate loading protocol is more observed in AGA than in OST.

Bead-anchored surgical templates for static computer-assisted implant surgery: A dental technique.

This technique report describes an alternative method to stabilize surgical templates throughout full-arch static computer-assisted implant surgery (FA s-CAIS). In FA s-CAIS, remaining teeth, mucosa, existing implants, custom occlusal device, bone, or any combination thereof, could be used as an initial positioning mechanism to position surgical templates. Different anchoring mechanisms are then used to stabilize the surgical templates during surgery. In this report, a novel design of surgical templates using remaining dentition and opposing occlusal surfaces as initial positioning mechanism followed by the combination of bone block fixation screw and stainless-steel beads as secondary anchoring mechanisms is described. The advantages, limitations, and comparisons with surgical templates using other anchoring mechanisms are also discussed.

Addition of an irrigation channel to a surgical template to facilitate cooling during implant osteotomy.

The increased precision and design of surgical templates for static computer-aided implant surgery has led to concerns of excessive heat generation from the friction between the twist drills, metal sleeves in the surgical template, and guide handles during osteotomy preparation. In addition, the presence of a surgical template can prevent proper cooling of the twist drill as it enters the osteotomy site, leading to greater heat generation. This excessive heat may result in bone necrosis and failure of osseointegration to the implant surface. This article describes a straightforward technique of incorporating an existing design feature in many virtual implant planning software programs to add an irrigation channel to the implant surgical template for effective cooling during osteotomy preparation.

CAD-CAM cobalt-chromium surgical template for static computer-aided implant surgery: A dental technique.

A digital process for designing and manufacturing a cobalt-chromium (Co-Cr) surgical template for static computer-aided implant surgery (s-CAIS) is described. The use of Co-Cr provides the advantage of a material with improved mechanical properties to reduce the possibility of surgical template fracture during s-CAIS. The stronger material also allows for a thinner surgical template, which in turn allows better access when the interarch operative space is limited or a longer implant is inserted. Limitations of the technique include the need for computer-aided manufacturing technology and, with the use of Co-Cr, a higher overall cost.

Consideration for Contemporary Implant Surgery.

The advancement of technology often provides clinicians and patients better clinical alternatives to achieve optimal treatment outcomes. Computer-guided options allow clinicians to realize the virtual prosthodontically driven surgical plan, facilitating more predictable implant placement. Although the use of technology does not mean the clinicians can forgo the fundamental treatment principles when treating a patient, proper assessment and diagnostic approach from prosthodontic, surgical, and radiographic perspectives are still essential for a successful clinical outcome. The purpose of this article is to review the fundamental concepts for the use of computer-guided surgery to facilitate prosthodontic treatment.

Computer-guided implant surgery and full-arch immediate loading with prefabricated-metal framework-provisional prosthesis created from a 3D printed model.

OBJECTIVE: In this article, we describe the planning phase and clinical procedure where a CAD CAM 3D printed master model was utilized to create a prefabricated-titanium reinforced-fixed provisional prosthesis for a full-arch immediate loading after computer-guided implant placement. CLINICAL CONSIDERATIONS: The clinical procedure should be performed based on digital planning through an advanced surgical planning software and following the guidelines of full-arch immediate loading protocol. The fact that the master model is fabricated under a computer-assisted design and computer-assisted manufacturing approach before implant placement makes the whole process considerably easier, faster, more precise and cheaper. CONCLUSIONS: The use of a prefabricated-metal framework-provisional prosthesis for full-arch immediate loading created from a 3D printed master model seems to be a predictable treatment option when computer-guided implant surgery is performed. CLINICAL SIGNIFICANCE: The presented article described an interesting and innovative technique to optimize implant treatment based on digital technologies and 3D printing. The presented technique will help to diminish treatment costs and times especially for immediate loading procedures in fully edentulous patients because it allows to fabricate a prosthetic structure prior implant placement based on a 3D printing process.

Prosthodontic rehabilitation with monolithic, multichromatic, CAD-CAM complete overdentures in an adolescent patient with ectodermal dysplasia: A clinical report.

Ectodermal dysplasia is a rare, hereditary, congenital disease that affects the normal development of certain tissues and structures of ectodermal origin. The disease is manifested to different degrees of severity and may involve the nose, eyes, hair, nails, sweat glands, and enamel. This report describes a 14-year-old boy with ectodermal dysplasia, rehabilitated with monolithic, multichromatic maxillary and mandibular computer-aided design and computer-aided manufacturing (CAD-CAM) acrylic resin complete overdentures.

Prosthodontic Rehabilitation of an Ectodermal Dysplasia Patient with Implant Telescopic Crown Attachments.

Telescopic crown attachments have been successfully used in completely and partially edentulous patients. This type of attachment provides retention, support, and stability with optimal hygiene for the removable dental prosthesis (RDP). With the emergence of CAD/CAM technology, telescopic crown attachments can be virtually designed and milled precisely to ensure a passive fit of the attachment parts and maximal functionality of the RDP. This article reviews both the clinical outcome and prosthodontic rehabilitation of telescopic crown attachments of an edentulous ectodermal dysplasia patient with solitary rigid conical telescopic crown attachments.

The effect of membrane exposure on lateral ridge augmentation: a case-controlled study.

BACKGROUND: The effect of membrane exposure on guided bone regeneration (GBR) for lateral ridge augmentation has been poorly addressed. This case-controlled study aimed to investigate potential effect of membrane exposure lateral ridge augmentation and subsequent implant placement. METHODS: A total of 14 patients that did receive lateral ridge augmentation procedure using allogeneic cancellous graft particulate in combination with an alloplastic bioresorbable matrix barrier were retrospectively selected for this study. Bone width was measured at the crest with a digital caliper before bone augmentation and at the reopening for implant placement 4 months later for all patients. Cases where primary flap closure was achieved and the barrier did not expose throughout the time until implant placement were assigned to the control group (n = 7). Cases where primary closure could not be achieved or a barrier exposure happened within the first week following the initial surgery were assigned to the test group. RESULTS: The measured alveolar ridge width before surgery as well as after GBR procedure were not statistically significant different between the two groups (p > 0.05). Both groups showed a significant (p < 0.05) increase in their mean alveolar ridge width 4 months after later augmentation procedure, from 3.4 ± 1.2 to 6.0 ± 1.1 mm in the control group and from 3.6 ± 1.0 to 5.0 ± 1.4 mm in the test group. However, the mean alveolar ridge gain was significantly greater in the control group than in the test group (p < 0.05). Consequently, the reduction of the augmented alveolar ridge was significantly higher in the test group averaging to 4.7 mm than for the control group showing a loss of 3.1 mm after 4 months, respectively. However, in all 14 cases, successful implant placement was achieved after 4 months. CONCLUSIONS: Within the limit of this study, it can be concluded that early exposure of a bioresorbable matrix barrier during lateral ridge augmentation may compromise the results of the GBR procedure but may still result in a favorable alveolar ridge width gain that allows for the placement of dental implants.

Creation of a 3-dimensional virtual dental patient for computer-guided surgery and CAD-CAM interim complete removable and fixed dental prostheses: A clinical report.

This clinical report proposes a digital workflow using 2-dimensional (2D) digital photographs, a 3D extraoral facial scan, and cone beam computed tomography (CBCT) volumetric data to create a 3D virtual patient with craniofacial hard tissue, remaining dentition (including surrounding intraoral soft tissue), and the realistic appearance of facial soft tissue at an exaggerated smile under static conditions. The 3D virtual patient was used to assist the virtual diagnostic tooth arrangement process, providing patient with a pleasing preoperative virtual smile design that harmonized with facial features. The 3D virtual patient was also used to gain patient's pretreatment approval (as a communication tool), design a prosthetically driven surgical plan for computer-guided implant surgery, and fabricate the computer-aided design and computer-aided manufacturing (CAD-CAM) interim prostheses.

Cone beam computed tomography imaging as a primary diagnostic tool for computer-guided surgery and CAD-CAM interim removable and fixed dental prostheses.

This article describes a digital workflow using cone beam computed tomography imaging as the primary diagnostic tool in the virtual planning of the computer-guided surgery and fabrication of a maxillary interim complete removable dental prosthesis and mandibular interim implant-supported complete fixed dental prosthesis with computer-aided design and computer-aided manufacturing technology. Diagnostic impressions (conventional or digital) and casts are unnecessary in this proposed digital workflow, providing clinicians with an alternative treatment in the indicated clinical scenario.

Digital approach to planning computer-guided surgery and immediate provisionalization in a partially edentulous patient.

This report describes a digital approach for computer-guided surgery and immediate provisionalization in a partially edentulous patient. With diagnostic data obtained from cone-beam computed tomography and intraoral digital diagnostic scans, a digital pathway of virtual diagnostic waxing, a virtual prosthetically driven surgical plan, a computer-aided design and computer-aided manufacturing (CAD/CAM) surgical template, and implant-supported screw-retained interim restorations were realized with various open-architecture CAD/CAM systems. The optional CAD/CAM diagnostic casts with planned implant placement were also additively manufactured to facilitate preoperative inspection of the surgical template and customization of the CAD/CAM-fabricated interim restorations.

Maxillary and mandibular immediately loaded implant-supported interim complete fixed dental prostheses on immediately placed dental implants with a digital approach: A clinical report.

This clinical report describes the treatment of maxillary and mandibular immediate implant placement and immediately loaded implant-supported interim complete fixed dental prostheses with a contemporary digital approach. The virtual diagnostic tooth arrangement eliminated the need for a customized radiographic template, and the diagnostic data collection required for computer-guided surgery (digital diagnostic impressions, digital photographs, and a cone beam-computed tomography [CBCT] scan) was completed in a single visit with improved workflow efficiency. Computer-aided design and computer-aided manufacturing (CAD/CAM)-fabricated surgical templates and interim prosthesis templates were made in a dental laboratory to facilitate computer-guided surgery and the immediate loading process.

Complete oral rehabilitation of a patient with hereditary gingival fibromatosis: a clinical report.

Hereditary gingival fibromatosis is a rare disease that has several debilitating oral and psychological manifestations, especially with young children and adolescents. The complexity of the treatment as well as the timing relative to the growth and maturation of the patient present a challenge. Few treatment options have been reported in the literature. This clinical report presents a multidisciplinary approach to treating a young patient with hereditary gingival fibromatosis by using implant-supported prostheses. The treatment steps and its outcome are discussed.

Application of digital diagnostic impression, virtual planning, and computer-guided implant surgery for a CAD/CAM-fabricated, implant-supported fixed dental prosthesis: a clinical report.

This clinical report demonstrated the use of an implant-supported fixed dental prosthesis fabricated with a contemporary digital approach. The digital diagnostic data acquisition was completed with a digital diagnostic impression with an intraoral scanner and cone-beam computed tomography with a prefabricated universal radiographic template to design a virtual prosthetically driven implant surgical plan. A surgical template fabricated with computer-aided design and computer-aided manufacturing (CAD/CAM) was used to perform computer-guided implant surgery. The definitive digital data were then used to design the definitive CAD/CAM-fabricated fixed dental prosthesis.

Treatment of a maxillary central incisor with class III invasive cervical resorption and compromised ferrule: a clinical report.

This clinical report presents the treatment of a maxillary central incisor with class III invasive cervical resorption and a compromised ferrule. Nonsurgical endodontic therapy combined with periodontal surgery was provided for debridement. Direct light-polymerizing resin-modified glass ionomer cement and a zirconia crown were used to repair the defect. Symptomatic endodontic complication was diagnosed with localized cone beam computed tomography at 6-month follow-up, and periapical microsurgery was rendered. The patient was followed-up for 30 months after treatment and had no further complications.

A retrospective study of complications associated with 100 consecutive maxillary sinus augmentations via the lateral window approach.

PURPOSE: To report the complications encountered during 100 consecutive maxillary sinus augmentations via the lateral window approach and to propose solutions to manage these complications. MATERIALS AND METHODS: Pretreatment residual bone heights and the presence of septa were recorded. The incidences of any intraoperative or postoperative sinus complications such as excessive bleeding, membrane perforation, infection, wound dehiscence, sinusitis, loss of bone graft, and implant success were reported. results: This study evaluated 42 men and 44 women requiring 100 consecutive sinus elevation procedures between March 2008 and February 2011. Five intraoperative membrane perforations were noted, and one subsequently developed an active infection (2 weeks after surgery). Eight instances of suppuration were noted, while 10 sites presented with wound dehiscence 1 to 2 weeks after surgery. One example of partial loss of the bone graft 6 months after surgery was identified. Of a total of 151 implants placed in 97 sinuses (one patient with bilateral sinuses and one with unilateral sinus did not complete implant placement), 2 implants presented excessive bone loss prior to uncovering. One implant was removed and one was left submerged. conclusions: Sinus floor elevation utilizing the lateral window approach is a predictable approach to manage bone volume deficiency in the posterior maxilla for patients seeking dental implant-based treatment. However, complications may include membrane tear, infection, wound dehiscence, loss of graft, and implant failure. It is vital for the clinician to understand how to recognize and solve these complications.