Coiled Coil Affinity-Based Systems for the Controlled Release of Biofunctionalized Gold Nanoparticles from Alginate Hydrogels.

Affinity-based systems represent a promising solution to control the delivery of therapeutics using hydrogels. Here, we report a hybrid system that is based on the peptidic E/K coiled coil affinity pair to mediate the release of gold nanoparticles (NPs) from alginate scaffolds. On one hand, the gold NPs were functionalized with the Ecoil-tagged epidermal growth factor (EGF). The bioactivity of the grafted EGF and the bioavailability of the Ecoil moiety were confirmed by EGF receptor phosphorylation assays and by capturing the functionalized NPs on a Kcoil-derivatized surface. On the other hand, alginate chains were modified with azido-homoalanine Kcoil (Aha-Kcoil) by azide-alkyne click chemistry. The hybrid system was formed by dispersing NPs functionalized with the Ecoil-tagged EGF in alginate hydrogels containing either 0, 10, or 20% of Kcoil-modified alginate (Alg-Kcoil). With 20% of Alg-Kcoil, the release of Ecoil-functionalized NPs was reduced by half when compared to the release of NPs without Ecoil, whereas little to no differences were noticed with either 0 or 10% of Alg-Kcoil. Differential dynamic microscopy was used to determine the diffusion coefficient of the NPs, and the results showed a decrease in the diffusion coefficient of Ecoil-functionalized NPs, when compared to bare PEGylated NPs. Altogether, our data demonstrated that the E/K coiled coil system can control the release of NPs in a high Kcoil content alginate gel, opening diverse applications in drug delivery.

Adequate Reducing Conditions Enable Conjugation of Oxidized Peptides to Polymers by One-Pot Thiol Click Chemistry.

Thiol(-click) chemistry has been extensively investigated to conjugate (bio)molecules to polymers. Handling of cysteine-containing molecules may however be cumbersome, especially in the case of fast-oxidizing coiled-coil-forming peptides. In the present study, we investigated the practicality of a one-pot process to concomitantly reduce and conjugate an oxidized peptide to a polymer. Three thiol-based conjugation chemistries (vinyl sulfone (VS), maleimide, and pyridyldithiol) were assayed along with three reducing agents (tris(2-carboxyethyl)phosphine (TCEP), dithiothreitol, and ß-mercaptoethanol). Seven out of the nine possible combinations significantly enhanced the conjugation yield, provided that an adequate concentration of reductant was used. Among them, the coincubation of an oxidized peptide with TCEP and a VS-modified polymer displayed the highest level of conjugation. Our results also provide insights into two topics that currently lack consensus: TCEP is stable in 10 mM phosphate buffered saline and it reacts with thiol-alkylating agents at submillimolar concentrations, and thus should be carefully used in order to avoid interference with thiol-based conjugation reactions.

Bioavailability of immobilized epidermal growth factor: Covalent versus noncovalent grafting.

In an effort to rationalize and optimize an antiapoptotic coating combining chondroitin sulfate (CS) and epidermal growth factor (EGF) for vascular applications, the authors here report the comparison of two grafting strategies aiming to display EGF in an oriented fashion on CS. For that purpose, the authors produced, purified, and characterized a chimeric protein corresponding to EGF that was N-terminally fused to a cysteine and a coil peptide. The chimera was covalently immobilized via its free thiol group or captured via coiled-coil interactions at the surface of a biosensor or on a chondroitin sulfate coating in multiwell plates, mimicking the coating that was previously developed by them for stent-graft surfaces. The interactions of grafted EGF with the soluble domain of its receptor or the impact of grafted EGF upon vascular smooth muscle survival in proapoptotic conditions indicated that the coiled-coil based tethering was the best approach to display EGF. These results, combined to direct enzyme-linked immunosorbent assay measurements, indicated that the coiled-coil tethering approach allowed increasing the amount of bioavailable EGF when compared to covalent coupling, rather than the total amount of grafted EGF, while using much lower concentrations of tagged EGF during incubation.

Two Complementary Approaches for the Controlled Release of Biomolecules Immobilized via Coiled-Coil Interactions: Peptide Core Mutations and Multivalent Presentation.

We have developed a heterodimeric coiled-coil system based on two complementary peptides, namely (EVSALEK)5 and (KVSALKE)5, or E and K, for the attachment of E-tagged biomolecules onto K-decorated biomaterials. We here explore two approaches to control the strength and the stability of the E/K coiled-coil complex, and thus its potential for the controlled release of biomolecules. Those are Leucine-to-Alanine mutations in the K peptide (4 peptides with 0 to 3 mutations) and multivalent presentation of the E peptide (6 bio-objects from monomeric to dimeric and n-meric). Using E-tagged growth factors and nanoparticles as models, SPR-based assays performed under continuous flow indicated that the release rate was strongly affected by both approaches independently, and that the strength of the capture could be finely tuned over a wide range (apparent dissociation constant from 0.12 pM to 270 nM). Further release assays carried out in well-plates showed that the multivalent presentation only had a significant influence in this setup since the wells were not rinsed under continuous flow.

Co-immobilization of adhesive peptides and VEGF within a dextran-based coating for vascular applications.

UNLABELLED: Multifunctional constructs providing a proper environment for adhesion and growth of selected cell types are needed for most tissue engineering and regenerative medicine applications. In this context, vinylsulfone (VS)-modified dextran was proposed as a matrix featuring low-fouling properties as well as multiple versatile moieties. The displayed VS groups could indeed react with thiol, amine or hydroxyl groups, be it for surface grafting, crosslinking or subsequent tethering of biomolecules. In the present study, a library of dextran-VS was produced, grafted to aminated substrates and characterized in terms of degree of VS modification (%VS), cell-repelling properties and potential for the oriented grafting of cysteine-tagged peptides. As a bioactive coating of vascular implants, ECM peptides (e.g. RGD) as well as vascular endothelial growth factor (VEGF) were co-immobilized on one of the most suitable dextran-VS coating (%VS=ca. 50% of saccharides units). Both RGD and VEGF were efficiently tethered at high densities (ca. 1nmol/cm(2) and 50fmol/cm(2), respectively), and were able to promote endothelial cell adhesion as well as proliferation. The latter was enhanced to the same extent as with soluble VEGF and proved selective to endothelial cells over smooth muscle cells. Altogether, multiple biomolecules could be efficiently incorporated into a dextran-VS construct, while maintaining their respective biological activity. STATEMENT OF SIGNIFICANCE: This work addresses the need for multifunctional coatings and selective cell response inherent to many tissue engineering and regenerative medicine applications, for instance, vascular graft. More specifically, a library of dextrans was first generated through vinylsulfone (VS) modification. Thoroughly selected dextran-VS provided an ideal platform for unbiased study of cell response to covalently grafted biomolecules. Considering that processes such as healing and angiogenesis require multiple factors acting synergistically, vascular endothelial growth factor (VEGF) was then co-immobilized with the cell adhesive RGD peptide within our dextran coating through a relevant strategy featuring orientation and specificity. Altogether, both adhesive and proliferative cues could be incorporated into our construct with additive, if not synergetic, effects.

Controlled co-immobilization of EGF and VEGF to optimize vascular cell survival.

Growth factors (GFs) are potent signaling molecules that act in a coordinated manner in physiological processes such as tissue healing or angiogenesis. Co-immobilizing GFs on materials while preserving their bioactivity still represents a major challenge in the field of tissue regeneration and bioactive implants. In this study, we explore the potential of an oriented immobilization technique based on two high affinity peptides, namely the Ecoil and Kcoil, to allow for the simultaneous capture of the epidermal growth factor (EGF) and the vascular endothelial growth factor (VEGF) on a chondroitin sulfate coating. This glycosaminoglycan layer was selected as it promotes cell adhesion but reduces non-specific adsorption of plasma proteins. We demonstrate here that both Ecoil-tagged GFs can be successfully immobilized on chondroitin sulfate surfaces that had been pre-decorated with the Kcoil peptide. As shown by direct ELISA, changing the incubation concentration of the various GFs enabled to control their grafted amount. Moreover, cell survival studies with endothelial and smooth muscle cells confirmed that our oriented tethering strategy preserved GF bioactivity. Of salient interest, co-immobilizing EGF and VEGF led to better cell survival compared to each GF captured alone, suggesting a synergistic effect of these GFs. Altogether, these results demonstrate the potential of coiled-coil oriented GF tethering for the co-immobilization of macromolecules; it thus open the way to the generation of biomaterials surfaces with fine-tuned biological properties. STATEMENT OF SIGNIFICANCE: Growth factors are potent signaling molecules that act in a coordinated manner in physiological processes such as tissue healing or angiogenesis. Controlled coimmobilization of growth factors on biomaterials while preserving their bioactivity represents a major challenge in the field of tissue regeneration and bioactive implants. This study demonstrates the potential of an oriented immobilization technique based on two high affinity peptides to allow for the simultaneous capture of epidermal growth factor (EGF) and vascular endothelial growth factor (VEGF). Our system allowed an efficient control on growth factor immobilization by adjusting the incubation concentrations of EGF and VEGF. Of salient interest, co-immobilizing of specific ratios of EGF and VEGF demonstrated a synergistic effect on cell survival compared to each GF captured alone.

Specific Adsorption via Peptide Tags: Oriented Grafting and Release of Growth Factors for Tissue Engineering.

Numerous strategies have been proposed to decorate biomaterials with growth factors (GFs) for tissue engineering applications; their practicability as clinical tools, however, remains uncertain. We previously presented two complementary amphipathic peptides, namely, E5 and K5, which could be utilized as tags to direct GF capture onto organic materials via E5/K5 coiled-coil interactions. We here investigated their potential as mediators of GF physical adsorption. Enzyme-linked immunosorbent assays highlighted that both electrostatic and hydrophobic interactions could contribute to the adsorption process, without interfering with the peptides propensity for coiled-coil interactions. E5-tagged vascular endothelial growth factor, in particular, was efficiently adsorbed to poly(allylamine)-functionalized polystyrene, was maintained in a bioactive state and was steadily liberated over several days with little initial burst. This simple immobilization procedure was successfully applied to poly(ethylene terephthalate) films. Altogether, our data demonstrated that coil-tag-directed adsorption is a tunable, versatile and straightforward strategy to decorate biomaterials with GFs.

Coiled-coil-mediated grafting of bioactive vascular endothelial growth factor.

Chimeric growth factors may represent a powerful alternative to their natural counterparts for the functionalization of tissue-engineered scaffolds and applications in regenerative medicine. Their rational design should provide a simple, readily scalable production strategy while improving retention at the site of action. In that endeavor, we here report the synthesis of a chimeric protein corresponding to human vascular endothelial growth factor 165 being N-terminally fused to an E5 peptide tag (E5-VEGF). E5-VEGF was successfully expressed as a homodimer in mammalian cells. Following affinity purification, in vitro surface plasmon resonance biosensing and cell survival assays confirmed diffusible E5-VEGF ability to bind to its receptor ectodomains, while observed morphological phenotypes confirmed its anti-apoptotic features. Additional surface plasmon resonance assays highlighted that E5-VEGF could be specifically captured with high stability when interacting with covalently immobilized K5 peptide (a synthetic peptide designed to bind to the E5 moiety of chimeric hVEGF). This immobilization strategy was applied to glass substrates and chimeric hVEGF was shown to be maintained in a functionally active state following capture. Altogether, our data demonstrated that stable hVEGF capture can be performed via coiled-coil interactions without impacting hVEGF bioactivity, thus opening up the way to future applications in the field of tissue engineering and regenerative medicine.

Immunosuppressive activity enhances central carbon metabolism and bioenergetics in myeloid-derived suppressor cells in vitro models.

BACKGROUND: The tumor microenvironment contains a vast array of pro- and anti-inflammatory cytokines that alter myelopoiesis and lead to the maturation of immunosuppressive cells known as myeloid-derived suppressor cells (MDSCs). Incubating bone marrow (BM) precursors with a combination of granulocyte-macrophage colony-stimulating factor (GM-CSF) and interleukin-6 (IL-6) generated a tumor-infiltrating MDSC-like population that impaired anti-tumor specific T-cell functions. This in vitro experimental approach was used to simulate MDSC maturation, and the cellular metabolic response was then monitored. A complementary experimental model that inhibited L-arginine (L-Arg) metabolizing enzymes in MSC-1 cells, an immortalized cell line derived from primary MDSCs, was used to study the metabolic events related to immunosuppression. RESULTS: Exposure of BM cells to GM-CSF and IL-6 activated, within 24 h, L-Arg metabolizing enzymes which are responsible for the MDSCs immunosuppressive potential. This was accompanied by an increased uptake of L-glutamine (L-Gln) and glucose, the latter being metabolized by anaerobic glycolysis. The up-regulation of nutrient uptake lead to the accumulation of TCA cycle intermediates and lactate as well as the endogenous synthesis of L-Arg and the production of energy-rich nucleotides. Moreover, inhibition of L-Arg metabolism in MSC-1 cells down-regulated central carbon metabolism activity, including glycolysis, glutaminolysis and TCA cycle activity, and led to a deterioration of cell bioenergetic status. The simultaneous increase of cell specific concentrations of ATP and a decrease in ATP-to-ADP ratio in BM-derived MDSCs suggested cells were metabolically active during maturation. Moreover, AMP-activated protein kinase (AMPK) was activated during MDSC maturation in GM-CSF and IL-6-treated cultures, as revealed by the continuous increase of AMP-to-ATP ratios and the phosphorylation of AMPK. Likewise, AMPK activity was decreased in MSC-1 cells when L-Arg metabolizing enzymes were inhibited. Finally, inhibition of AMPK activity by the specific inhibitor Compound C (Comp-C) resulted in the inhibition of L-Arg metabolizing enzyme activity and abolished MDSCs immunosuppressive activity. CONCLUSIONS: We anticipate that the inhibition of AMPK and the control of metabolic fluxes may be considered as a novel therapeutic target for the recovery of the immunosurveillance process in cancer-bearing hosts.