Translating radiology reports into plain language using ChatGPT and GPT-4 with prompt learning: results, limitations, and potential.

The large language model called ChatGPT has drawn extensively attention because of its human-like expression and reasoning abilities. In this study, we investigate the feasibility of using ChatGPT in experiments on translating radiology reports into plain language for patients and healthcare providers so that they are educated for improved healthcare. Radiology reports from 62 low-dose chest computed tomography lung cancer screening scans and 76 brain magnetic resonance imaging metastases screening scans were collected in the first half of February for this study. According to the evaluation by radiologists, ChatGPT can successfully translate radiology reports into plain language with an average score of 4.27 in the five-point system with 0.08 places of information missing and 0.07 places of misinformation. In terms of the suggestions provided by ChatGPT, they are generally relevant such as keeping following-up with doctors and closely monitoring any symptoms, and for about 37% of 138 cases in total ChatGPT offers specific suggestions based on findings in the report. ChatGPT also presents some randomness in its responses with occasionally over-simplified or neglected information, which can be mitigated using a more detailed prompt. Furthermore, ChatGPT results are compared with a newly released large model GPT-4, showing that GPT-4 can significantly improve the quality of translated reports. Our results show that it is feasible to utilize large language models in clinical education, and further efforts are needed to address limitations and maximize their potential.

Discrimination tasks in simulated low-dose CT noise.

BACKGROUND: This study reports the results of a set of discrimination experiments using simulated images that represent the appearance of subtle lesions in low-dose computed tomography (CT) of the lungs. Noise in these images has a characteristic ramp-spectrum before apodization by noise control filters. We consider three specific diagnostic features that determine whether a lesion is considered malignant or benign, two system-resolution levels, and four apodization levels for a total of 24 experimental conditions. PURPOSE: The goal of the investigation is to better understand how well human observers perform subtle discrimination tasks like these, and the mechanisms of that performance. We use a forced-choice psychophysical paradigm to estimate observer efficiency and classification images. These measures quantify how effectively subjects can read the images, and how they use images to perform discrimination tasks across the different imaging conditions. MATERIALS AND METHODS: The simulated CT images used as stimuli in the psychophysical experiments are generated from high-resolution objects passed through a modulation transfer function (MTF) before down-sampling to the image-pixel grid. Acquisition noise is then added with a ramp noise-power spectrum (NPS), with subsequent smoothing through apodization filters. The features considered are lesion size, indistinct lesion boundary, and a nonuniform lesion interior. System resolution is implemented by an MTF with resolution (10% max.) of 0.47 or 0.58 cyc/mm. Apodization is implemented by a Shepp-Logan filter (Sinc profile) with various cutoffs. Six medically naïve subjects participated in the psychophysical studies, entailing training and testing components for each condition. Training consisted of staircase procedures to find the 80% correct threshold for each subject, and testing involved 2000 psychophysical trials at the threshold value for each subject. Human-observer performance is compared to the Ideal Observer to generate estimates of task efficiency. The significance of imaging factors is assessed using ANOVA. Classification images are used to estimate the linear template weights used by subjects to perform these tasks. Classification-image spectra are used to analyze subject weights in the spatial-frequency domain. RESULTS: Overall, average observer efficiency is relatively low in these experiments (10%-40%) relative to detection and localization studies reported previously. We find significant effects for feature type and apodization level on observer efficiency. Somewhat surprisingly, system resolution is not a significant factor. Efficiency effects of the different features appear to be well explained by the profile of the linear templates in the classification images. Increasingly strong apodization is found to both increase the classification-image weights and to increase the mean-frequency of the classification-image spectra. A secondary analysis of "Unapodized" classification images shows that this is largely due to observers undoing (inverting) the effects of apodization filters. CONCLUSIONS: These studies demonstrate that human observers can be relatively inefficient at feature-discrimination tasks in ramp-spectrum noise. Observers appear to be adapting to frequency suppression implemented in apodization filters, but there are residual effects that are not explained by spatial weighting patterns. The studies also suggest that the mechanisms for improving performance through the application of noise-control filters may require further investigation.

A Rare Case of Central Nervous System Vasculitis in a Patient with Perinuclear Antineutrophil Cytoplasmic Antibodies-associated Interstitial Lung Disease.

Antineutrophil cytoplasmic antibody (ANCA)-associated vasculitis (AAV) is a systemic necrotizing inflammation of the small vessels. Central nervous system (CNS) ANCA-associated vasculitis is a rare manifestation of AAV. Three mechanisms of AAV affecting the CNS have been reported which include contiguous granulomatous invasion from nasal and paranasal sinuses, remote granulomatous lesions, and vasculitis of small vessels. Chronic hypertrophic pachymeningitis (CHP) is the meningeal-site involvement in AAV caused by granulomatous inflammation in the dura mater. We present a case of pachymeningitis manifested with slowly progressive cognitive dysfunction, leptomeningeal enhancement on MRI, and necrotic vessels with surrounding inflammation on biopsy. This case represents a rare development of subsequent CNS AAV in a patient with ANCA-associated interstitial lung disease treated with rituximab with a resolution of leptomeningeal enhancement on a follow-up magnetic resonance imaging (MRI).

Computational reader design and statistical performance evaluation of an in-silico imaging clinical trial comparing digital breast tomosynthesis with full-field digital mammography.

A recent study reported on an in-silico imaging trial that evaluated the performance of digital breast tomosynthesis (DBT) as a replacement for full-field digital mammography (FFDM) for breast cancer screening. In this in-silico trial, the whole imaging chain was simulated, including the breast phantom generation, the x-ray transport process, and computational readers for image interpretation. We focus on the design and performance characteristics of the computational reader in the above-mentioned trial. Location-known lesion (spiculated mass and clustered microcalcifications) detection tasks were used to evaluate the imaging system performance. The computational readers were designed based on the mechanism of a channelized Hotelling observer (CHO), and the reader models were selected to trend human performance. Parameters were tuned to ensure stable lesion detectability. A convolutional CHO that can adapt a round channel function to irregular lesion shapes was compared with the original CHO and was found to be suitable for detecting clustered microcalcifications but was less optimal in detecting spiculated masses. A three-dimensional CHO that operated on the multiple slices was compared with a two-dimensional (2-D) CHO that operated on three versions of 2-D slabs converted from the multiple slices and was found to be optimal in detecting lesions in DBT. Multireader multicase reader output analysis was used to analyze the performance difference between FFDM and DBT for various breast and lesion types. The results showed that DBT was more beneficial in detecting masses than detecting clustered microcalcifications compared with FFDM, consistent with the finding in a clinical imaging trial. Statistical uncertainty smaller than 0.01 standard error for the estimated performance differences was achieved with a dataset containing approximately 3000 breast phantoms. The computational reader design methodology presented provides evidence that model observers can be useful in-silico tools for supporting the performance comparison of breast imaging systems.

Human observer templates for lesion discrimination tasks.

We investigate a series of two-alternative forced-choice (2AFC) discrimination tasks based on malignant features of abnormalities in low-dose lung CT scans. A total of 3 tasks are evaluated, and these consist of a size-discrimination task, a boundary-sharpness task, and an irregular-interior task. Target and alternative signal profiles for these tasks are modulated by one of two system transfer functions and embedded in ramp-spectrum noise that has been apodized for noise control in one of 4 different ways. This gives the resulting images statistical properties that are related to weak ground-glass lesions in axial slices of low-dose lung CT images. We investigate observer performance in these tasks using a combination of statistical efficiency and classification images. We report results of 24 2AFC experiments involving the three tasks. A staircase procedure is used to find the approximate 80% correct discrimination threshold in each task, with a subsequent set of 2,000 trials at this threshold. These data are used to estimate statistical efficiency with respect to the ideal observer for each task, and to estimate the observer template using the classification-image methodology. We find efficiency varies between the different tasks with lowest efficiency in the boundary-sharpness task, and highest efficiency in the non-uniform interior task. All three tasks produce clearly visible patterns of positive and negative weighting in the classification images. The spatial frequency plots of classification images show how apodization results in larger weights at higher spatial frequencies.

Impact of prevalence and case distribution in lab-based diagnostic imaging studies.

We investigated effects of prevalence and case distribution on radiologist diagnostic performance as measured by area under the receiver operating characteristic curve (AUC) and sensitivity-specificity in lab-based reader studies evaluating imaging devices. Our retrospective reader studies compared full-field digital mammography (FFDM) to screen-film mammography (SFM) for women with dense breasts. Mammograms were acquired from the prospective Digital Mammographic Imaging Screening Trial. We performed five reader studies that differed in terms of cancer prevalence and the distribution of noncancers. Twenty radiologists participated in each reader study. Using split-plot study designs, we collected recall decisions and multilevel scores from the radiologists for calculating sensitivity, specificity, and AUC. Differences in reader-averaged AUCs slightly favored SFM over FFDM (biggest AUC difference: 0.047, SE = 0.023 , p = 0.047 ), where standard error accounts for reader and case variability. The differences were not significant at a level of 0.01 (0.05/5 reader studies). The differences in sensitivities and specificities were also indeterminate. Prevalence had little effect on AUC (largest difference: 0.02), whereas sensitivity increased and specificity decreased as prevalence increased. We found that AUC is robust to changes in prevalence, while radiologists were more aggressive with recall decisions as prevalence increased.

A data-efficient method for local noise power spectrum (NPS) estimation in FDK-reconstructed 3D cone-beam CT.

PURPOSE: For computed tomography (CT) systems in which noise is nonstationary, a local noise power spectrum (NPS) is often needed to characterize its noise property. We have previously developed a data-efficient radial NPS method to estimate the two-dimensional (2D) local NPS for filtered back projection (FBP)-reconstructed fan-beam CT utilizing the polar separability of CT NPS. In this work, we extend this method to estimate three-dimensional (3D) local NPS for feldkamp-davis-kress (FDK)-reconstructed cone-beam CT (CBCT) volumes. METHODS: Starting from the 2D polar separability, we analyze the CBCT geometry and FDK image reconstruction process to derive the 3D expression of the polar separability for CBCT local NPS. With the polar separability, the 3D local NPS of CBCT can be decomposed into a 2D radial NPS shape function and a one-dimensional (1D) angular amplitude function with certain geometrical transforms. The 2D radial NPS shape function is a global function characterizing the noise correlation structure, while the 1D angular amplitude function is a local function reflecting the varying local noise amplitudes. The 3D radial local NPS method is constructed from the polar separability. We evaluate the accuracy of the 3D radial local NPS method using simulated and real CBCT data by comparing the radial local NPS estimates to a reference local NPS in terms of normalized mean squared error (NMSE) and a task-based performance metric (lesion detectability). RESULTS: In both simulated and physical CBCT examples, a very small NMSE (<5%) was achieved by the radial local NPS method from as few as two scans, while for the traditional local NPS method, about 20 scans were needed to reach this accuracy. The results also showed that the detectability-based system performances computed using the local NPS estimated with the NPS method developed in this work from two scans closely reflected the actual system performance. CONCLUSIONS: The polar separability greatly reduces the data dimensionality of the 3D CBCT local NPS. The radial local NPS method developed based on this property is shown to be capable of estimating the 3D local NPS from only two CBCT scans with acceptable accuracy. The minimum data requirement indicates the potential utility of local NPS in CBCT applications even for clinical situations.

Discrimination of Pulmonary Nodule Volume Change for Low- and High-contrast Tasks in a Phantom CT Study with Low-dose Protocols.

RATIONALE AND OBJECTIVES: The quantitative assessment of volumetric CT for discriminating small changes in nodule size has been under-examined. This phantom study examined the effect of imaging protocol, nodule size, and measurement method on volume-based change discrimination across low and high object to background contrast tasks. MATERIALS AND METHODS: Eight spherical objects ranging in diameter from 5.0 mm to 5.75 mm and 8.0 mm to 8.75 mm with 0.25 mm increments were scanned within an anthropomorphic phantom with either foam-background (high-contrast task, ∼1000 HU object to background difference)) or gelatin-background (low-contrast task, ∼50 to 100 HU difference). Ten repeat acquisitions were collected for each protocol with varying exposures, reconstructed slice thicknesses and reconstruction kernels. Volume measurements were obtained using a matched-filter approach (MF) and a publicly available 3D segmentation-based tool (SB). Discrimination of nodule sizes was assessed using the area under the ROC curve (AUC). RESULTS: Using a low-dose (1.3 mGy), thin-slice (≤1.5 mm) protocol, changes of 0.25 mm in diameter were detected with AU = 1.0 for all baseline sizes for the high-contrast task regardless of measurement method. For the more challenging low-contrast task and same protocol, MF detected changes of 0.25 mm from baseline sizes ≥5.25 mm and volume changes ≥9.4% with AUC≥0.81 whereas corresponding results for SB were poor (AUC within 0.49-0.60). Performance for SB was improved, but still inconsistent, when exposure was increased to 4.4 mGy. CONCLUSION: The reliable discrimination of small changes in pulmonary nodule size with low-dose, thin-slice CT protocols suitable for lung cancer screening was dependent on the inter-related effects of nodule to background contrast and measurement method.

Physiological random processes in precision cancer therapy.

Many different physiological processes affect the growth of malignant lesions and their response to therapy. Each of these processes is spatially and genetically heterogeneous; dynamically evolving in time; controlled by many other physiological processes, and intrinsically random and unpredictable. The objective of this paper is to show that all of these properties of cancer physiology can be treated in a unified, mathematically rigorous way via the theory of random processes. We treat each physiological process as a random function of position and time within a tumor, defining the joint statistics of such functions via the infinite-dimensional characteristic functional. The theory is illustrated by analyzing several models of drug delivery and response of a tumor to therapy. To apply the methodology to precision cancer therapy, we use maximum-likelihood estimation with Emission Computed Tomography (ECT) data to estimate unknown patient-specific physiological parameters, ultimately demonstrating how to predict the probability of tumor control for an individual patient undergoing a proposed therapeutic regimen.

Evaluation of Digital Breast Tomosynthesis as Replacement of Full-Field Digital Mammography Using an In Silico Imaging Trial.

Importance: Expensive and lengthy clinical trials can delay regulatory evaluation of innovative technologies, affecting patient access to high-quality medical products. Simulation is increasingly being used in product development but rarely in regulatory applications. Objectives: To conduct a computer-simulated imaging trial evaluating digital breast tomosynthesis (DBT) as a replacement for digital mammography (DM) and to compare the results with a comparative clinical trial. Design, Setting, and Participants: The simulated Virtual Imaging Clinical Trial for Regulatory Evaluation (VICTRE) trial was designed to replicate a clinical trial that used human patients and radiologists. Images obtained with in silico versions of DM and DBT systems via fast Monte Carlo x-ray transport were interpreted by a computational reader detecting the presence of lesions. A total of 2986 synthetic image-based virtual patients with breast sizes and radiographic densities representative of a screening population and compressed thicknesses from 3.5 to 6 cm were generated using an analytic approach in which anatomical structures are randomly created within a predefined breast volume and compressed in the craniocaudal orientation. A positive cohort contained a digitally inserted microcalcification cluster or spiculated mass. Main Outcomes and Measures: The trial end point was the difference in area under the receiver operating characteristic curve between modalities for lesion detection. The trial was sized for an SE of 0.01 in the change in area under the curve (AUC), half the uncertainty in the comparative clinical trial. Results: In this trial, computational readers analyzed 31 055 DM and 27 960 DBT cases from 2986 virtual patients with the following Breast Imaging Reporting and Data System densities: 286 (9.6%) extremely dense, 1200 (40.2%) heterogeneously dense, 1200 (40.2%) scattered fibroglandular densities, and 300 (10.0%) almost entirely fat. The mean (SE) change in AUC was 0.0587 (0.0062) (P < .001) in favor of DBT. The change in AUC was larger for masses (mean [SE], 0.0903 [0.008]) than for calcifications (mean [SE], 0.0268 [0.004]), which was consistent with the findings of the comparative trial (mean [SE], 0.065 [0.017] for masses and -0.047 [0.032] for calcifications). Conclusions and Relevance: The results of the simulated VICTRE trial are consistent with the performance seen in the comparative trial. While further research is needed to assess the generalizability of these findings, in silico imaging trials represent a viable source of regulatory evidence for imaging devices.

Impact of Different Study Populations on Reader Behavior and Performance Metrics: Initial Results.

The FDA recently completed a study on design methodologies surrounding the Validation of Imaging Premarket Evaluation and Regulation called VIPER. VIPER consisted of five large reader sub-studies to compare the impact of different study populations on reader behavior as seen by sensitivity, specificity, and AUC, the area under the ROC curve (receiver operating characteristic curve). The study investigated different prevalence levels and two kinds of sampling of non-cancer patients: a screening population and a challenge population. The VIPER study compared full-field digital mammography (FFDM) to screen-film mammography (SFM) for women with heterogeneously dense or extremely dense breasts. All cases and corresponding images were sampled from Digital Mammographic Imaging Screening Trial (DMIST) archives. There were 20 readers (American Board Certified radiologists) for each sub-study, and instead of every reader reading every case (fully-crossed study), readers and cases were split into groups to reduce reader workload and the total number of observations (split-plot study). For data collection, readers first decided whether or not they would recall a patient. Following that decision, they provided an ROC score for how close or far that patient was from the recall decision threshold. Performance results for FFDM show that as prevalence increases to 50%, there is a moderate increase in sensitivity and decrease in specificity, whereas AUC is mainly flat. Regarding precision, the statistical efficiency (ratio of variances) of sensitivity and specificity relative to AUC are 0.66 at best and decrease with prevalence. Analyses comparing modalities and the study populations (screening vs. challenge) are still ongoing.

Optimization of digital breast tomosynthesis (DBT) acquisition parameters for human observers: effect of reconstruction algorithms.

We showed in our earlier work that the choice of reconstruction methods does not affect the optimization of DBT acquisition parameters (angular span and number of views) using simulated breast phantom images in detecting lesions with a channelized Hotelling observer (CHO). In this work we investigate whether the model-observer based conclusion is valid when using humans to interpret images. We used previously generated DBT breast phantom images and recruited human readers to find the optimal geometry settings associated with two reconstruction algorithms, filtered back projection (FBP) and simultaneous algebraic reconstruction technique (SART). The human reader results show that image quality trends as a function of the acquisition parameters are consistent between FBP and SART reconstructions. The consistent trends confirm that the optimization of DBT system geometry is insensitive to the choice of reconstruction algorithm. The results also show that humans perform better in SART reconstructed images than in FBP reconstructed images. In addition, we applied CHOs with three commonly used channel models, Laguerre-Gauss (LG) channels, square (SQR) channels and sparse difference-of-Gaussian (sDOG) channels. We found that LG channels predict human performance trends better than SQR and sDOG channel models for the task of detecting lesions in tomosynthesis backgrounds. Overall, this work confirms that the choice of reconstruction algorithm is not critical for optimizing DBT system acquisition parameters.

Psychotropic prescribing in seriously violent men with schizophrenia or personality disorder in a UK high security hospital.

OBJECTIVES: To analyze antipsychotic prescribing patterns in a UK high security hospital (HSH) that treats seriously violent men with either schizophrenia or personality disorder and examine how different groups consented to treatment and prescribing for metabolic conditions. We hypothesized that there would be high prevalence of antipsychotic polypharmacy, and high-dose antipsychotic and clozapine prescribing. BACKGROUND: HSHs treat seriously violent, mentally disordered offenders, and the extant literature on prescribing patterns in forensic settings is sparse. METHODS: Prescribing and clinical data on all 189 patients in a UK HSH were collected from the hospital's databases. Data were analyzed using SPSS. RESULTS: The population was split into the following groups: schizophrenia spectrum disorder (SSD-only), personality disorder (PD-only), and comorbid schizophrenia spectrum disorder and PD. The majority (93.7%) of all patients were prescribed at least one antipsychotic, and (27.5%) were on clozapine. Polypharmacy was prevalent in 22.2% and high-dose antipsychotic in 27.5%. Patients on clozapine were more likely to be prescribed antidiabetic, statins, or antihypertensive medication. Patients in the PD-only group were more likely to be deemed to have the capacity to consent to treatment and be prescribed clozapine in contrast to the SSD-only group. CONCLUSIONS: Rates of clozapine and high-dose antipsychotic prescribing were higher than in other psychiatric settings, while polypharmacy prescribing rates were lower. Higher clozapine prescribing rates may be a function of a treatment-resistant and aggressive population. A higher proportion of PD-only patients consented to treatment and received clozapine compared with in-house SSD-only as well as other psychiatric settings. Implications of the findings are discussed.

Comparison of Channel Methods and Observer Models for the Task-Based Assessment of Multi-Projection Imaging in the Presence of Structured Anatomical Noise.

Although Laguerre-Gauss (LG) channels are often used for the task-based assessment of multi-projection imaging, LG channels may not be the most reliable in providing performance trends as a function of system or object parameters for all situations. Partial least squares (PLS) channels are more flexible in adapting to background and signal data statistics and were shown to be more efficient for detection tasks involving 2D non-Gaussian random backgrounds (Witten , 2010). In this work, we investigate ways of incorporating spatial correlations in the multi-projection data space using 2D LG channels and two implementations of PLS in the channelized version of the 3D projection Hotelling observer (Park , 2010) (3Dp CHO). Our task is to detect spherical and elliptical 3D signals in the angular projections of a structured breast phantom ensemble. The single PLS (sPLS) incorporates the spatial correlation within each projection, whereas the combined PLS (cPLS) incorporates the spatial correlations both within each of and across the projections. The 3Dp CHO-R indirectly incorporates the spatial correlation from the response space (R), whereas the 3Dp CHO-C from the channel space (C). The 3Dp CHO-R-sPLS has potential to be a good surrogate observer when either sample size is small or one training set is used for training both PLS channels and observer. So does the 3Dp CHO-C-cPLS when the sample size is large enough to have a good sized independent set for training PLS channels. Lastly a stack of 2D LG channels used as 3D channels in the CHO-C model showed the capability of incorporating the spatial correlation between the multiple angular projections.

Volume estimation of low-contrast lesions with CT: a comparison of performances from a phantom study, simulations and theoretical analysis.

Measurements of lung nodule volume with multi-detector computed tomography (MDCT) have been shown to be more accurate and precise compared to conventional lower dimensional measurements. Quantifying the size of lesions is potentially more difficult when the object-to-background contrast is low as with lesions in the liver. Physical phantom and simulation studies are often utilized to analyze the bias and variance of lesion size estimates because a ground truth or reference standard can be established. In addition, it may also be useful to derive theoretical bounds as another way of characterizing lesion sizing methods. The goal of this work was to study the performance of a MDCT system for a lesion volume estimation task with object-to-background contrast less than 50 HU, and to understand the relation among performances obtained from phantom study, simulation and theoretical analysis. We performed both phantom and simulation studies, and analyzed the bias and variance of volume measurements estimated by a matched-filter-based estimator. We further corroborated results with a theoretical analysis to estimate the achievable performance bound, which was the Cramer-Rao's lower bound (CRLB) of minimum variance for the size estimates. Results showed that estimates of non-attached solid small lesion volumes with object-to-background contrast of 31-46 HU can be accurate and precise, with less than 10.8% in percent bias and 4.8% in standard deviation of percent error (SPE), in standard dose scans. These results are consistent with theoretical (CRLB), computational (simulation) and empirical phantom bounds. The difference between the bounds is rather small (for SPE less than 1.9%) indicating that the theoretical- and simulation-based performance bounds can be good surrogates for physical phantom studies.

Task-based measures of image quality and their relation to radiation dose and patient risk.

The theory of task-based assessment of image quality is reviewed in the context of imaging with ionizing radiation, and objective figures of merit (FOMs) for image quality are summarized. The variation of the FOMs with the task, the observer and especially with the mean number of photons recorded in the image is discussed. Then various standard methods for specifying radiation dose are reviewed and related to the mean number of photons in the image and hence to image quality. Current knowledge of the relation between local radiation dose and the risk of various adverse effects is summarized, and some graphical depictions of the tradeoffs between image quality and risk are introduced. Then various dose-reduction strategies are discussed in terms of their effect on task-based measures of image quality.

Evaluating the sensitivity of the optimization of acquisition geometry to the choice of reconstruction algorithm in digital breast tomosynthesis through a simulation study.

Due to the limited number of views and limited angular span in digital breast tomosynthesis (DBT), the acquisition geometry design is an important factor that affects the image quality. Therefore, intensive studies have been conducted regarding the optimization of the acquisition geometry. However, different reconstruction algorithms were used in most of the reported studies. Because each type of reconstruction algorithm can provide images with its own image resolution, noise properties and artifact appearance, it is unclear whether the optimal geometries concluded for the DBT system in one study can be generalized to the DBT systems with a reconstruction algorithm different to the one applied in that study. Hence, we investigated the effect of the reconstruction algorithm on the optimization of acquisition geometry parameters through carefully designed simulation studies. Our results show that using various reconstruction algorithms, including the filtered back-projection, the simultaneous algebraic reconstruction technique, the maximum-likelihood method and the total-variation regularized least-square method, gave similar performance trends for the acquisition parameters for detecting lesions. The consistency of system ranking indicates that the choice of the reconstruction algorithm may not be critical for DBT system geometry optimization.

A virtual trial framework for quantifying the detectability of masses in breast tomosynthesis projection data.

PURPOSE: Digital breast tomosynthesis (DBT) is a promising breast cancer screening tool that has already begun making inroads into clinical practice. However, there is ongoing debate over how to quantitatively evaluate and optimize these systems, because different definitions of image quality can lead to different optimal design strategies. Powerful and accurate tools are desired to extend our understanding of DBT system optimization and validate published design principles. METHODS: The authors developed a virtual trial framework for task-specific DBT assessment that uses digital phantoms, open-source x-ray transport codes, and a projection-space, spatial-domain observer model for quantitative system evaluation. The authors considered evaluation of reconstruction algorithms as a separate problem and focused on the information content in the raw, unfiltered projection images. Specifically, the authors investigated the effects of scan angle and number of angular projections on detectability of a small (3 mm diameter) signal embedded in randomly-varying anatomical backgrounds. Detectability was measured by the area under the receiver-operating characteristic curve (AUC). Experiments were repeated for three test cases where the detectability-limiting factor was anatomical variability, quantum noise, or electronic noise. The authors also juxtaposed the virtual trial framework with other published studies to illustrate its advantages and disadvantages. RESULTS: The large number of variables in a virtual DBT study make it difficult to directly compare different authors' results, so each result must be interpreted within the context of the specific virtual trial framework. The following results apply to 25% density phantoms with 5.15 cm compressed thickness and 500 µm(3) voxels (larger 500 µm(2) detector pixels were used to avoid voxel-edge artifacts): 1. For raw, unfiltered projection images in the anatomical-variability-limited regime, AUC appeared to remain constant or increase slightly with scan angle. 2. In the same regime, when the authors fixed the scan angle, AUC increased asymptotically with the number of projections. The threshold number of projections for asymptotic AUC performance depended on the scan angle. In the quantum- and electronic-noise dominant regimes, AUC behaviors as a function of scan angle and number of projections sometimes differed from the anatomy-limited regime. For example, with a fixed scan angle, AUC generally decreased with the number of projections in the electronic-noise dominant regime. These results are intended to demonstrate the capabilities of the virtual trial framework, not to be used as optimization rules for DBT. CONCLUSIONS: The authors have demonstrated a novel simulation framework and tools for evaluating DBT systems in an objective, task-specific manner. This framework facilitates further investigation of image quality tradeoffs in DBT.

Benefit of overlapping reconstruction for improving the quantitative assessment of CT lung nodule volume.

RATIONALE AND OBJECTIVES: The aim of this study was to quantify the effect of overlapping reconstruction on the precision and accuracy of lung nodule volume estimates in a phantom computed tomographic (CT) study. MATERIALS AND METHODS: An anthropomorphic phantom was used with a vasculature insert on which synthetic lung nodules were attached. Repeated scans of the phantom were acquired using a 64-slice CT scanner. Overlapping and contiguous reconstructions were performed for a range of CT imaging parameters (exposure, slice thickness, pitch, reconstruction kernel) and a range of nodule characteristics (size, density). Nodule volume was estimated with a previously developed matched-filter algorithm. RESULTS: Absolute percentage bias across all nodule sizes (n = 2880) was significantly lower when overlapping reconstruction was used, with an absolute percentage bias of 6.6% (95% confidence interval [CI], 6.4-6.9), compared to 13.2% (95% CI, 12.7-13.8) for contiguous reconstruction. Overlapping reconstruction also showed a precision benefit, with a lower standard percentage error of 7.1% (95% CI, 6.9-7.2) compared with 15.3% (95% CI, 14.9-15.7) for contiguous reconstructions across all nodules. Both effects were more pronounced for the smaller, subcentimeter nodules. CONCLUSIONS: These results support the use of overlapping reconstruction to improve the quantitative assessment of nodule size with CT imaging.

Relating Fisher information to detectability of changes in nodule characteristics with CT.

Fisher information provides a bound on the variance of any unbiased estimate for estimation tasks involving nonrandom parameters. In addition, a Fisher information approximation for ideal-observer detectability has been derived. We adopt and generalize such an approximation to establish a method to assess a system's ability to detect small changes in lesion characteristics. By representing the lesion by a size parameter, the ability to detect small changes can be approximated by a function involving the size difference and the Fisher information. A concept, termed the approximated least required difference (ALRD), is introduced and evaluated as an upper bound for assessing a system's power in size discrimination. We present a simulation study for lung nodules as an example to illustrate such a framework, where the image model incorporates a simulated CT imaging system, a thorax background and parameterized nodules. The noise is assumed to be multivariate Gaussian and the noise power spectrum (NPS) method is used to estimate the covariance matrix for the Fisher information calculation. In addition to bounding performance, our results also provide insights into factors, including nodule characteristics and acquisition parameters, that influence ALRD performance. This framework can be extended to connect other discrimination and estimation tasks, facilitating objective assessment and optimization of quantitative imaging systems.