A survey of carboplatin desensitization therapy in Japan: A multicenter retrospective study.

INTRODUCTION: Hypersensitivity reactions (HSRs) to chemotherapy are serious adverse events associated with cancer drug therapy and can occur with any antitumor drug. This study investigated the safety and efficacy of carboplatin desensitization therapy in Japan and established a method for treating carboplatin HSRs. METHODS: Patients diagnosed with gynecological (ovarian, endometrial, or cervical) cancers who underwent carboplatin desensitization therapy between 2016 and 2020 at the Gynecologic Cancer Study Group of Japan Clinical Oncology Group were included. The carboplatin desensitization therapy at each institution and the implementation cases were registered in an online case report form. RESULTS: This retrospective study enrolled 136 patients (ovarian, 108; endometrial, 17; and cervical cancer, 11). Pre-existing allergies were present in 37 (27.2%) patients, and 32 (23.5%) patients exhibited prodromal symptoms during treatment before HSR onset. Erythema was the most common symptom at HSR onset, affecting 93 (68.4%) patients, followed by itching in 72 (52.9%) patients and decreased oxygen saturation in 43 (31.6%) patients. Loss of consciousness occurred in three (2.2%) patients. The most common timing of HSR onset was during the first recurrence treatment (47%). The mean total carboplatin dose until HSR onset was 7331 (2620-18,282) mg, and the mean number of doses was 14 (4-63). Desensitization treatment was completed in 75% of cases, and breakthrough HSRs occurred in 25% (34/136). No deaths occurred in the study cohort. The risk factors for HSRs were not identified. CONCLUSION: Although carboplatin desensitization therapy has high success rates in Japan, erythema and pruritus are important HSRs to consider.

Efficacy and safety of olaparib, olaparib plus bevacizumab and niraparib maintenance treatment in Japanese patients with platinum-sensitive advanced ovarian cancer.

OBJECTIVE: To investigate whether maintenance treatment could be safely and effectively performed with olaparib, olaparib plus bevacizumab and niraparib in platinum-sensitive advanced ovarian cancer at multiple institutions in Japan. METHODS: We investigated progression-free survival and adverse events in 117 patients with platinum-sensitive advanced ovarian cancer treated with maintenance therapy. RESULTS: The median progression-free survival of 117 patients was 20.1 months. Patients with germline BRCA pathogenic variants had a significantly better prognosis than the other groups (P < 0.001). Furthermore, in the multivariate analysis, stage IV (P = 0.016) and germline BRCA wild-type (P ≤ 0.001) were significantly associated with worse progression-free survival in patients with advanced ovarian cancer. Regarding adverse events, all three types of maintenance treatment were significantly worse than chemotherapy given before maintenance treatment with respect to renal function (olaparib, P = 0.037; olaparib plus bevacizumab, P < 0.001; and niraparib, P = 0.016). CONCLUSION: Maintenance treatment was performed effectively and safely. Renal function deterioration is likely to occur during maintenance treatment, and careful administration is important in platinum-sensitive advanced ovarian cancer.

Standalone cell culture microfluidic device-based microphysiological system for automated cell observation and application in nephrotoxicity tests.

Microphysiological systems (MPS) offer an alternative method for culturing cells on microfluidic platforms to model organ functions in pharmaceutical and medical sciences. Although MPS hardware has been proposed to maintain physiological organ function through perfusion culture, no existing MPS can automatically assess cell morphology and conditions online to observe cellular dynamics in detail. Thus, with this study, we aimed to establish a practical strategy for automating cell observation and improving cell evaluation functions with low temporal resolution and throughput in MPS experiments. We developed a versatile standalone cell culture microfluidic device (SCCMD) that integrates microfluidic chips and their peripherals. This device is compliant with the ANSI/SLAS standards and has been seamlessly integrated into an existing automatic cell imaging system. This integration enables automatic cell observation with high temporal resolution in MPS experiments. Perfusion culture of human kidney proximal tubule epithelial cells using the SCCMD improves cell function. By combining the proximal tubule MPS with an existing cell imaging system, nephrotoxicity studies were successfully performed to automate morphological and material permeability evaluation. We believe that the concept of building the ANSI/SLAS-compliant-sized MPS device proposed herein and integrating it into an existing automatic cell imaging system for the online measurement of detailed cell dynamics information and improvement of throughput by automating observation operations is a novel potential research direction for MPS research.

Relationship Between Hematological Toxicities During Maintenance Treatment and During Chemotherapy Before Maintenance Treatment in Patients With Platinum-sensitive Relapsed Ovarian Cancer.

BACKGROUND/AIM: To determine if maintenance treatment can be performed effectively and safely in patients with platinum-sensitive relapsed ovarian cancer. PATIENTS AND METHODS: We carried out a multi-center study to investigate progression-free survival (PFS) and adverse events (AEs) in 229 patients receiving maintenance treatment for platinum-sensitive relapsed ovarian cancer. RESULTS: The median PFS in the 229 patients with maintenance treatment was 14.0 months (95% confidence interval=10.3-17.6 months). The hematological toxicities included ≥grade 3 anemia in 33.2% of cases. Anemia during maintenance treatment was significantly more common than anemia during chemotherapy given before maintenance treatment (p<0.001). Anemia during chemotherapy prior to maintenance treatment significantly increased the risk of anemia during maintenance treatment, compared with other clinical features (p<0.001). CONCLUSION: Maintenance treatment can be performed safely and effectively in patients with platinum-sensitive relapsed ovarian cancer. Anemia during chemotherapy given before maintenance treatment significantly increased the risk of developing anemia during maintenance treatment in patients with platinum-sensitive relapsed ovarian cancer.

Outcomes of Pregnancies and Deliveries of Patients Who Underwent Fertility-Preserving Surgery for Early-Stage Epithelial Ovarian Cancer.

Some studies have shown increased risks of preterm birth, low birth weight, and cesarean delivery after oncologic treatment; others have shown the opposite. We evaluated the outcomes of pregnancies and deliveries of patients who underwent fertility-preserving surgery (FSS) for early-stage epithelial ovarian cancer (EOC) and examined their perinatal prognosis. This retrospective study included women with a history of stage IA or IC ovarian cancer reported in our previous study. The primary outcome was preterm birth after cancer diagnosis was considered. Secondary outcomes were neonatal morbidity and severe maternal morbidity. Thirty-one children were born to 25 women who had undergone FSS. The mean number of weeks at delivery was 38.7 ± 0.7, and the mean birth weight of infants was 3021 ± 160 g. With respect to pregnancy outcomes, 5 patients had preterm labor and 26 had full-term labor. The delivery mode was vaginal delivery in 18 patients and cesarean delivery in 13. Complications during pregnancy included placenta previa (one case) and pelvic abscess (one case). Except for three preterm infants with low birth weight, there were no other perinatal abnormalities. Pregnancy after fertility preservation in EOC has an excellent perinatal prognosis, although the cesarean delivery rate is high.

Clinical outcomes of 34 patients with resistance to thyroid hormone beta: a twenty-year experience in Japan.

Resistance to thyroid hormone beta (RTHß) caused by germline mutations in genes encoding thyroid hormone receptor beta (TRß) is a rare disorder. Little information is available regarding the clinical experience of this syndrome in Japan. We retrospectively reviewed the records of 34 patients with RTHß (21 adult females and 13 adult males) with positive TRß mutations identified at our division between 2000 and 2020. Of the 24 patients with available clinical history, 10 (41.7%) received inappropriate treatments such as antithyroid drugs, thyroidectomy, or radioactive iodine. Diagnostic delay and inappropriate management of RTHß are still present in Japan. Every patient except one demonstrated thyroid hormone profiles indicative of syndrome of inappropriate secretion of thyrotropin (SITSH), characterized by a hormonal profile of hyperthyroxinemia with a non-suppressed TSH concentration. Since the most common forms of hyperthyroidism including Graves' disease feature elevated thyroid hormone levels with suppressed TSH concentrations, early diagnosis of SITSH is critical for preventing inappropriate management. One patient positive for anti-thyroglobulin antibody (Tg-Ab) and anti-thyroperoxidase antibody (TPO-Ab) showed remarkably elevated TSH (>200 µIU/mL) despite thyroid hormone concentrations within the reference ranges. At least one thyroid autoantibody (Tg-Ab, TPO-Ab, or thyrotropin receptor antibodies) was identified in 37.9% (11/29) of the patients tested. One patient developed overt Graves' disease nine years after RTHß diagnosis. These findings suggest that RTHß is frequently comorbid with additional autoimmune thyroid disorders. Further research is required to identify the most appropriate treatments for RTHß patients who develop a second thyroid disorder.

Impairment of the Hypothalamus-Pituitary-Thyroid Axis Caused by Naturally Occurring GATA2 Mutations In Vitro.

The transcription factor GATA2 regulates gene expression in several cells and tissues, including hematopoietic tissues and the central nervous system. Recent studies revealed that loss-of-function mutations in GATA2 are associated with hematological disorders. Our earlier in vitro studies showed that GATA2 plays an essential role in the hypothalamus-pituitary-thyroid axis (HPT axis) by regulating the genes encoding prepro-thyrotropin-releasing hormone (preproTRH) and thyroid-stimulating hormone ß (TSHß). However, the effect of GATA2 mutants on the transcriptional activity of their promoters remains unelucidated. In this study, we created five human GATA2 mutations (R308P, T354M, R396Q, R398W, and S447R) that were reported to be associated with hematological disorders and analyzed their functional properties, including transactivation potential and DNA-binding capacity toward the preproTRH and the TSHß promoters. Three mutations (T354M, R396Q, and R398W) within the C-terminal zinc-finger domain reduced the basal GATA2 transcriptional activity on both the preproTRH and the TSHß promoters with a significant loss of DNA binding affinity. Interestingly, only the R398W mutation reduced the GATA2 protein expression. Subsequent analysis demonstrated that the R398W mutation possibly facilitated the GATA2 degradation process. R308P and S447R mutants exhibited decreased transcriptional activity under protein kinase C compared to the wild-type protein. In conclusion, we demonstrated that naturally occurring GATA2 mutations impair the HPT axis through differential functional mechanisms in vitro.

Analgesic Effects of Sokeikakketsuto on Chemotherapy-Induced Mechanical Allodynia and Cold Hyperalgesia in Rats.

The anticancer agents including oxaliplatin, paclitaxel, and bortezomib cause severe peripheral neuropathy. The Kampo medicine Sokeikakketsuto (SOKT) has been widely used to treat several types of pain. In this study, the analgesic effects of SOKT on oxaliplatin-, paclitaxel-, and bortezomib-induced peripheral neuropathy were investigated in rat models. Rats were treated with oxaliplatin (4 mg/kg, intraperitoneally (i.p.), twice a week for four weeks), paclitaxel (4 mg/kg, i.p., twice a week for two weeks), or bortezomib (0.2 mg/kg, i.p., twice a week for two weeks). SOKT (0.3 or 1.0 g/kg) or duloxetine hydrochloride (30 mg/kg, as a positive control) was administered orally after neuropathy developed. Mechanical allodynia and cold hyperalgesia were assessed using the von Frey test and the acetone test, respectively. These tests were performed immediately before and 30, 60, 90, and 120 min after the administration of the drugs. Repeated treatment of oxaliplatin induced mechanical allodynia and cold hyperalgesia. A single administration of SOKT (1 g/kg, per os (p.o.)), as well as duloxetine, temporarily reversed both the mechanical allodynia and the cold hyperalgesia. Repeated administration of paclitaxel and bortezomib also induced the mechanical allodynia. SOKT and duloxetine reversed the mechanical allodynia caused by bortezomib, but not by paclitaxel. SOKT might have the potential to become a new drug to relieve the symptom of oxaliplatin- or bortezomib-induced peripheral neuropathy.

Phase 2 single-arm study on the efficacy and safety of niraparib in Japanese patients with heavily pretreated, homologous recombination-deficient ovarian cancer.

OBJECTIVE: To evaluate the efficacy and safety of niraparib in Japanese women with heavily pretreated ovarian cancer. METHODS: This Phase 2 open-label, single-arm study enrolled Japanese women with homologous recombination deficiency-positive relapsed, high-grade serous ovarian, fallopian tube, or primary peritoneal cancer who had completed 3-4 lines of therapy. The starting dose of niraparib was 300 mg administered once daily in continuous 28-day cycles until objective progressive disease, unacceptable toxicity, consent withdrawal or discontinuation. The primary endpoint, objective response rate (ORR), was assessed by the investigator using RECIST version 1.1. Safety evaluations included the incidence of treatment-emergent adverse events (TEAEs), including serious TEAEs. RESULTS: Twenty women were enrolled and the confirmed ORR in the full analysis set (FAS) was 35.0% (7/20), consisting of 1 complete response and 6 partial responses. Disease control rate in the FAS was 90.0%. The most frequently reported TEAEs (>50%) were anemia, nausea, and platelet count decreased. One patient (5.0%) had TEAEs leading to discontinuation of niraparib whereas reductions or interruptions were reported in 14 (70.0%) and 15 (75.0%) patients, respectively. The median dose intensity (202.9 mg daily) corresponded to a relative dose intensity of 67.6%. CONCLUSION: Efficacy and safety of niraparib in heavily pretreated Japanese women was comparable to that seen in an equivalent population of non-Japanese women. No new safety signals were identified. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT03759600.

Innovative CAD/CAM Guide for Mandibular Reconstruction with Metallic Condylar Head and Free Fibular Flap.

In reconstructions of mandibles and condyles, free fibular flaps and metallic condylar heads (CH) are often used after resection. However, in conventional reconstructions, it is difficult to fix the metallic CH on the same preoperative position because the position is determined visually. Therefore, we have made an original computer-aided design and manufacture (CAD/CAM) guide for mandibular condyle reconstruction, combining a metallic CH with a free fibular flap. A 71-year-old woman with gingival carcinoma underwent hemimandibulectomy. We reconstructed the mandible and condyle with a metallic CH and a free fibular flap. We placed a mark on the CAD/CAM guide showing the correct position for fixing the CH to the fibular blocks. We also designed a surface for attaching to the healthy edge of the mandible. The fibular blocks and metallic CH were fixed as 1 unit before separating the flap from the leg and replacing the diseased tissue. Reconstruction was completed by fixing the attachment surface to the healthy side of the mandible. The guide marks solved the difficulty of conventional reconstruction; during surgery, we fixed the metallic CH to the same position as the original bone using these marks. The postoperative deviation of the condyle from the virtual plan was 4.3 mm, whereas the reported deviation of such prostheses was 3.8 mm (range 1.3-6.7); so our guide was acceptably accurate. Furthermore, it appears that the CAD/CAM guide is more useful for reconstruction after hemimandibulectomy including the condyle than after segmental resection without including condyle.

G ATA2 mediates the negative regulation of the prepro-thyrotropin-releasing hormone gene by liganded T3 receptor ß2 in the rat hypothalamic paraventricular nucleus.

Thyroid hormone (T3) inhibits thyrotropin-releasing hormone (TRH) synthesis in the hypothalamic paraventricular nucleus (PVN). Although the T3 receptor (TR) ß2 is known to mediate the negative regulation of the prepro-TRH gene, its molecular mechanism remains unknown. Our previous studies on the T3-dependent negative regulation of the thyrotropin ß subunit (TSHß) gene suggest that there is a tethering mechanism, whereby liganded TRß2 interferes with the function of the transcription factor, GATA2, a critical activator of the TSHß gene. Interestingly, the transcription factors Sim1 and Arnt2, the determinants of PVN differentiation in the hypothalamus, are reported to induce expression of TRß2 and GATA2 in cultured neuronal cells. Here, we confirmed the expression of the GATA2 protein in the TRH neuron of the rat PVN using immunohistochemistry with an anti-GATA2 antibody. According to an experimental study from transgenic mice, a region of the rat prepro-TRH promoter from nt. -547 to nt. +84 was able to mediate its expression in the PVN. We constructed a chloramphenicol acetyltransferase (CAT) reporter gene containing this promoter sequence (rTRH(547)-CAT) and showed that GATA2 activated the promoter in monkey kidney-derived CV1 cells. Deletion and mutation analyses identified a functional GATA-responsive element (GATA-RE) between nt. -357 and nt. -352. When TRß2 was co-expressed, T3 reduced GATA2-dependent promoter activity to approximately 30%. Unexpectedly, T3-dependent negative regulation was maintained after mutation of the reported negative T3-responsive element, site 4. T3 also inhibited the GATA2-dependent transcription enhanced by cAMP agonist, 8-bromo-cAMP. A rat thyroid medullary carcinoma cell line, CA77, is known to express the preproTRH mRNA. Using a chromatin immunoprecipitation assay with this cell line where GATA2 expression plasmid was transfected, we observed the recognition of the GATA-RE by GATA2. We also confirmed GATA2 binding using gel shift assay with the probe for the GATA-RE. In CA77 cells, the activity of rTRH(547)-CAT was potentiated by overexpression of GATA2, and it was inhibited in a T3-dependent manner. These results suggest that GATA2 transactivates the rat prepro-TRH gene and that liganded TRß2 interferes with this activation via a tethering mechanism as in the case of the TSHß gene.

Does an In-House Computer-Aided Design/Computer-Aided Manufacturing Approach Contribute to Accuracy and Time Shortening in Mandibular Reconstruction?

Mandibular reconstruction using computer-aided design and computer-assisted manufacturing (CAD/CAM) techniques has received recent attention. This technique has theoretical advantages, although this approach can be commercially used in the limited area of the world.The aim is to describe our experience using in-house CAD/CAM guides and the situations in which CAD/CAM may present benefit in the region where commercial guides are unavailable.The authors developed our In-house CAD/CAM approach for mandibular reconstructions with a free fibular flap. Patients were divided into 2 group; CAD/CAM and conventional groups. In the CAD/CAM group, reconstructions were planned virtually using CAD/CAM; these CAD/CAM guides were used in the surgery. In the conventional group, free-hand cutting and fitting of the fibular segments were performed as reconstructions. Later, the bone computed tomographic image was compared with the plan. The averaged deviations and the percentages of the points within 1 mm, 2 mm, and 3 mm deviations were recorded. Total and ischemic time were also recorded.Reconstruction points within 1 mm deviation were 59% of CAD/CAM group (n = 9) and 42% of conventional group (n = 10, P = 0.04), within 2 mm 82% and 69% (P = 0.03). Total time were 1012 and 911 minutes, while flap ischemic time were 147 and 175 minutes (P = 0.03), respectively.In-house CAD/CAM mandibular reconstruction also supported accuracy and shorter flap ischemic time. For a detailed accurate reconstruction, CAD/CAM showed superiority than conventional method. Use of the In-house CAD/CAM guides might be an option where commercial guides are not available.

[Coexistence of IgG4-related autoimmune hepatitis and inflammatory pseudotumors of the liver:a case report].

IgG4-related autoimmune hepatitis (IgG4-AIH) is characterized by hepatic inflammation and is considered an IgG4-related disease. Several inflammatory pseudotumors (IPTs) are also considered as IgG4-related diseases;however, there have been no reports of cases wherein both diseases occurred concurrently. An older adult with liver dysfunction was admitted to the hospital and was diagnosed with IgG4-AIH following a liver biopsy;IgG4-positive plasma cell infiltration in the portal tract and high serum IgG4 concentration were detected. A few months following biopsy, imaging studies revealed two IPTs in the liver. The patient was diagnosed with cryptogenic organized pneumonia several months after imaging and was treated with steroids in a different hospital. Her liver dysfunction improved, and one of the two IPTs disappeared in response to steroid treatment. The following is an account of a rare case of IgG4-AIH with IPTs of the liver.

Two Cases of the Vascular Territory of a Single-pedicled Deep Inferior Epigastric Perforator Flap with a Vertical Midline Abdominal Scar.

: The deep inferior epigastric perforator (DIEP) flap is becoming the gold standard for breast reconstruction using autologous tissue. If there are scars in the abdomen from previous surgery, it is necessary to judge the indication for using this flap carefully. Particularly in cases with vertical midline scars, the blood flow supply to the zone II can be compromised. Even when patients have a median abdominal scar, it has been reported that the blood flow can extend beyond the scar and reach several centimeters to about half of zone II. We performed breast reconstruction using DIEP flaps for 2 patients with vertical midline scars in the lower abdomen. Indocyanine green angiography was conducted intraoperatively to confirm the vascular territory with a single pedicle before cutting off the flap. One patient showed fluorescence contrast on the contralateral side across the midline scar. However, the fluorescence contrast was absent across the midline scar in the other patient. Based on this result, we investigated the possible vascular territory of a single pedicled DIEP flap in patients with vertical midline abdominal scars. We suggest that successful blood supply to zone II of a single-pedicled DIEP flap in a patient with a vertical midline abdominal scar is related to the location of the perforator and the property of the tissue in the midline near the perforator. However, because it is difficult to predict the vascular territory of a single pedicle before surgery, intraoperative evaluation using such techniques such as indocyanine green fluorescence imaging is important.

Liganded T3 receptor ß2 inhibits the positive feedback autoregulation of the gene for GATA2, a transcription factor critical for thyrotropin production.

The serum concentration of thyrotropin (thyroid stimulating hormone, TSH) is drastically reduced by small increase in the levels of thyroid hormones (T3 and its prohormone, T4); however, the mechanism underlying this relationship is unknown. TSH consists of the chorionic gonadotropin α (CGA) and the ß chain (TSHß). The expression of both peptides is induced by the transcription factor GATA2, a determinant of the thyrotroph and gonadotroph differentiation in the pituitary. We previously reported that the liganded T3 receptor (TR) inhibits transactivation activity of GATA2 via a tethering mechanism and proposed that this mechanism, but not binding of TR with a negative T3-responsive element, is the basis for the T3-dependent inhibition of the TSHß and CGA genes. Multiple GATA-responsive elements (GATA-REs) also exist within the GATA2 gene itself and mediate the positive feedback autoregulation of this gene. To elucidate the effect of T3 on this non-linear regulation, we fused the GATA-REs at -3.9 kb or +9.5 kb of the GATA2 gene with the chloramphenicol acetyltransferase reporter gene harbored in its 1S-promoter. These constructs were co-transfected with the expression plasmids for GATA2 and the pituitary specific TR, TRß2, into kidney-derived CV1 cells. We found that liganded TRß2 represses the GATA2-induced transactivation of these reporter genes. Multi-dimensional input function theory revealed that liganded TRß2 functions as a classical transcriptional repressor. Then, we investigated the effect of T3 on the endogenous expression of GATA2 protein and mRNA in the gonadotroph-derived LßT2 cells. In this cell line, T3 reduced GATA2 protein independently of the ubiquitin proteasome system. GATA2 mRNA was drastically suppressed by T3, the concentration of which corresponds to moderate hypothyroidism and euthyroidism. These results suggest that liganded TRß2 inhibits the positive feedback autoregulation of the GATA2 gene; moreover this mechanism plays an important role in the potent reduction of TSH production by T3.

Designing CAD/CAM Surgical Guides for Maxillary Reconstruction Using an In-house Approach.

Computer-aided design/computer-assisted manufacturing (CAD/CAM) is now being evaluated as a preparative technique for maxillofacial surgery. Because this technique is expensive and available in only limited areas of the world, we developed a novel CAD/CAM surgical guide using an in-house approach. By using the CAD software, the maxillary resection area and cutting planes and the fibular cutting planes and angles are determined. Once the resection area is decided, the necessary faces are extracted using a Boolean modifier. These superficial faces are united to fit the surface of the bones and thickened to stabilize the solids. Not only the cutting guides for the fibula and maxilla but also the location arrangement of the transferred bone segments is defined by thickening the superficial faces. The CAD design is recorded as .stl files and three-dimensionally (3-D) printed as actual surgical guides. To check the accuracy of the guides, model surgery using 3-D-printed facial and fibular models is performed. These methods may be used to assist surgeons where commercial guides are not available.

The Mechanism of Negative Transcriptional Regulation by Thyroid Hormone: Lessons From the Thyrotropin ß Subunit Gene.

Thyroid hormone (T3) activates (positive regulation) or represses (negative regulation) target genes at the transcriptional level. The molecular mechanism of the former has been elucidated in detail; however, the mechanism for negative regulation has not been established. The best example of the gene that is negatively regulated by T3 is the thyrotropin (thyroid-stimulating hormone) ß subunit (TSHß) gene. Analogous to the T3-responsive element (TRE) in positive regulation, a negative TRE (nTRE) has been postulated in the TSHß gene. However, TSHß promoter analysis, performed in the presence of transcription factors Pit1 and GATA2, which are determinants of thyrotroph differentiation in the pituitary, revealed that the nTRE is dispensable for inhibition by T3. We propose a tethering model in which the T3 receptor is tethered to GATA2 via protein-protein interaction and inhibits GATA2-dependent transactivation of the TSHß gene in a T3-dependent manner.

Using an In-House Approach to Computer-Assisted Design and Computer-Aided Manufacturing Reconstruction of the Maxilla.

PURPOSE: Computer-assisted design (CAD) and computer-aided manufacturing (CAM) techniques are in widespread use for maxillofacial reconstruction. However, CAD/CAM surgical guides are commercially available only in limited areas. To use this technology in areas where these commercial guides are not available, the authors developed a CAD/CAM technique in which all processes are performed by the surgeon (in-house approach). The authors describe their experience and the characteristics of their in-house CAD/CAM reconstruction of the maxilla. PATIENTS AND METHODS: This was a retrospective study of maxillary reconstruction with a free osteocutaneous flap. Free CAD software was used for virtual surgery and to design the cutting guides (maxilla and fibula), which were printed by a 3-dimensional printer. After the model surgery and pre-bending of the titanium plates, the actual reconstructions were performed. The authors compared the clinical information, preoperative plan, and postoperative reconstruction data. The reconstruction was judged as accurate if more than 80% of the reconstructed points were within a deviation of 2 mm. RESULTS: Although on-site adjustment was necessary in particular cases, all 4 reconstructions were judged as accurate. In total, 3 days were needed before the surgery for planning, printing, and pre-bending of plates. The average ischemic time was 134 minutes (flap suturing and bone fixation, 70 minutes; vascular anastomoses, 64 minutes). The mean deviation after reconstruction was 0.44 mm (standard deviation, 0.97). The deviations were 67.8% for 1 mm, 93.8% for 2 mm, and 98.6% for 3 mm. The disadvantages of the regular use of CAD/CAM reconstruction are the intraoperative changes in defect size and local tissue scarring. CONCLUSION: Good accuracy was obtained for CAD/CAM-guided reconstructions based on an in-house approach. The theoretical advantage of computer simulation contributes to the accuracy. An in-house approach could be an option for maxillary reconstruction.

Dual Vascular Free Anterolateral Thigh Flap.

BACKGROUND: The optimum number of microvascular anastomoses for safe free tissue transfer is controversial. Although the case for 2 venous anastomoses versus 1 anastomosis has been argued, the use of an additional arterial anastomosis has not been examined in detail. METHODS: Twelve patients who underwent 2 arterial anastomoses for a free flap transfer were identified retrospectively from the medical records of patients undergoing reconstruction for head and neck cancer. The free flaps were limited to anterolateral thigh (ALT) flaps. RESULTS: All flaps survived. Complications included venous thrombosis (n = 1), reexploration (n = 1), and leakage (n = 3). The vascular patterns of dual-arterialized ALT flaps were classified into 3 groups. Types 1 and 2 were ALT flaps that had 2 vascular sources from the descending and lateral branches of the lateral circumflex femoral artery. The number of accompanying veins differed between type 1 (3 veins) and type 2 (2 veins). Type 3 differed from a conventional ALT flap nourished by the descending branch of the lateral circumflex femoral artery (1 vein) by the addition of anastomosis of an artery branching from the descending branch to the vastus medialis muscle. The total operation times for these 3 types of ALT were similar. CONCLUSIONS: An additional arterial anastomosis to the free cutaneous flap did not cause any congestion or disturb the balance between inflow and outflow. If the surgeon considers that the first arterial anastomosis is unreliable, an additional anastomosis might be an option in ALT transfer.