Steering CO2 electroreduction toward ethanol production by a surface-bound Ru polypyridyl carbene catalyst on N-doped porous carbon.

Electrochemical reduction of CO2 to multicarbon products is a significant challenge, especially for molecular complexes. We report here CO2 reduction to multicarbon products based on a Ru(II) polypyridyl carbene complex that is immobilized on an N-doped porous carbon (RuPC/NPC) electrode. The catalyst utilizes the synergistic effects of the Ru(II) polypyridyl carbene complex and the NPC interface to steer CO2 reduction toward C2 production at low overpotentials. In 0.5 M KHCO3/CO2 aqueous solutions, Faradaic efficiencies of 31.0 to 38.4% have been obtained for C2 production at -0.87 to -1.07 V (vs. normal hydrogen electrode) with 21.0 to 27.5% for ethanol and 7.1 to 12.5% for acetate. Syngas is also produced with adjustable H2/CO mole ratios of 2.0 to 2.9. The RuPC/NPC electrocatalyst maintains its activity during 3-h CO2-reduction periods.

Crossing the bridge from molecular catalysis to a heterogenous electrode in electrocatalytic water oxidation.

Significant progress has been made in designing single-site molecular Ru(II)-polypyridyl-aqua catalysts for homogenous catalytic water oxidation. Surface binding and transfer of the catalytic reactivity onto conductive substrates provides a basis for heterogeneous applications in electrolytic cells and dye-sensitized photoelectrosynthesis cells (DSPECs). Earlier efforts have focused on phosphonic acid (-PO3H2) or carboxylic acid (-CO2H) bindings on oxide surfaces. However, issues remain with limited surface stabilities, especially in aqueous solutions at higher pH under conditions that favor water oxidation by reducing the thermodynamic barrier and accelerating the catalytic rate using atom-proton transfer (APT) pathways. Here, we address the problem by combining silane surface functionalization and surface reductive electropolymerization on mesoporous, nanofilms of indium tin oxide (ITO) on fluorine-doped tin oxide (FTO) substrates (FTO|nanoITO). FTO|nanoITO electrodes were functionalized with vinyltrimethoxysilane (VTMS) to introduce vinyl groups on the electrode surfaces by silane attachment, followed by surface electropolymerization of the vinyl-derivatized complex, [RuII(Mebimpy)(dvbpy)(OH2)]2+ (12+; Mebimpy: 2,6-bis(1-methyl-1H-benzo[d]imidazol-2-yl)pyridine; dvbpy: 5,5'-divinyl-2,2'-bipyridine), in a mechanism dominated by a grafting-through method. The surface coverage of catalyst 12+ was controlled by the number of electropolymerization cycles. The combined silane attachment/cross-linked polymer network stabilized 12+ on the electrode surface under a variety of conditions especially at pH > ∼6. Surface-grafted poly12+ was stable toward redox cycling at pH ∼ 7.5 over an ∼4-h period. Sustained heterogeneous electrocatalytic water oxidation by the electrode gave steady-state currents for at least ∼6 h with a Faradaic efficiency of ∼68% for O2 production.

Stabilization of Ruthenium(II) Polypyridyl Chromophores on Mesoporous TiO2 Electrodes: Surface Reductive Electropolymerization and Silane Chemistry.

Stabilization is a critical issue in the long term operation of dye-sensitized photoelectrosynthesis cells (DSPECs) for water splitting or CO2 reduction. The cells require a stable binding of the robust molecular chromophores, catalysts, and chromophore/catalyst assemblies on metal oxide semiconductor electrodes under the corresponding (photoelectro)chemical conditions. Here, an efficient stabilization strategy is presented based on functionalization of FTO|nanoTiO2 (mesoporous, nanostructured TiO2 deposited on fluorine-doped tin oxide (FTO) glass) electrodes with a vinylsilane followed by surface reductive electropolymerization of a vinyl-derivatized Ru(II) polypyridyl chromophore. The surface electropolymerization was dominated by a grafting-through mechanism, and rapidly completed within minutes. Chromophore surface coverages were controlled up to three equivalent monolayers by the number of electropolymerization cycles. The silane immobilization and cross-linked polymer network produced highly (photo)stabilized chromophore-grafted FTO|nanoTiO2 electrodes. The electrodes showed significant improvements over structures based on atomic layer deposition and polymer dip-coating stabilization methods in a wide pH range from pH ≈ 1 to pH ≈ 12.5 under both dark and light conditions. Under illumination, with hydroquinone added as a sacrificial electron transfer donor, a photoresponse for sustained electron transfer mediation occurred for at least ∼20 h in a pH ≈ 7.5 phosphate buffer (0.1 M NaH2PO4/Na2HPO4, with 0.5 M NaClO4). The overall procedure provides an efficient way to fabricate highly stabilized molecular assemblies on electrode surfaces with potential applications for DSPECs in solar fuels.

Stable Molecular Surface Modification of Nanostructured, Mesoporous Metal Oxide Photoanodes by Silane and Click Chemistry.

Binding functional molecules to nanostructured mesoporous metal oxide surfaces provides a way to derivatize metal oxide semiconductors for applications in dye-sensitized photoelectrosynthesis cells (DSPECs). The commonly used anchoring groups, phosphonates and carboxylates, are unstable as surface links to oxide surfaces at neutral and high pH, leading to rapid desorption of appended molecules. A synthetically versatile molecular attachment strategy based on initial surface modification with a silyl azide followed by click chemistry is described here. It has been used for the stable installation of surface-bound metal complexes. The resulting surfaces are highly stabilized toward complex loss with excellent thermal, photochemical, and electrochemical stabilities. The procedure involves binding 3-azidopropyltrimethoxysilane (APTMS) to nanostructured mesoporous TiO2 or tin-doped indium oxide (ITO) electrodes by silane attachment followed by azide-terminated, Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reactions with an alkyne-derivatized ruthenium(II) polypyridyl complex. The chromophore-modified electrodes display enhanced photochemical and electrochemical stabilities compared to phosphonate surface binding with extended photoelectrochemical oxidation of hydroquinone for more than ∼6 h with no significant decay.

A Molecular Silane-Derivatized Ru(II) Catalyst for Photoelectrochemical Water Oxidation.

Photoanodes in dye-sensitized photoelectrosynthesis cells integrate molecular chromophore/catalyst assemblies on mesoporous n-type metal oxide electrodes for light-driven water oxidation. One limitation for sustainable photoanodes is the stability of chromophore/catalyst assembly on electrode surfaces for long periods. Progress has been made in stabilizing chromophores based on atomic layer deposition, polymer dip coating, C-C cross-coupling by electropolymerization, and silane surface binding, but little progress has been made on catalyst stabilization. We report here the silane-derivatized catalyst, Ru(bda)(L)2 (bda = 2,2'-bipyridine-6,6'-dicarboxylate, L = 4-(6-(triethoxysilyl)hexyl)pyridine), catalyst 1, which is stabilized on metal oxide electrode surfaces over an extended pH range. A surface stabilization study shows that it maintains its reactivity on the electrode surface toward electrochemical oxidation over a wide range of conditions. Its electrochemical stability on electrode surfaces has been systematically evaluated, and its role as a catalyst for water oxidation has been explored. On surfaces of mesoporous nanostructured core/shell SnO2/TiO2, with a TiO2 stabilized inner layer of the Ru(II) polypyridyl chromophore, [Ru(4,4'-(PO3H2)2bpy)(bpy)2]2+ (RuP2+; bpy = 2,2'-bipyridine), highly efficient photoelectrochemical water oxidation catalysis occurs to produce O2 with a maximum efficiency of ∼1.25 mA/cm2. Long-term loss of catalytic activity occurs with time owing to catalyst loss from the electrode surface by axial ligand dissociation in the high oxidation states of the catalyst.

Stabilized photoanodes for water oxidation by integration of organic dyes, water oxidation catalysts, and electron-transfer mediators.

Stabilized photoanodes for light-driven water oxidation have been prepared on nanoparticle core/shell electrodes with surface-stabilized donor-acceptor chromophores, a water oxidation catalyst, and an electron-transfer mediator. For the electrode, fluorine-doped tin oxide FTO|SnO2/TiO2|-Org1-|1.1 nm Al2O3|-RuP2+-WOC (water oxidation catalyst) with Org1 (1-cyano-2-(4-(diphenylamino)phenyl)vinyl)phosphonic acid), the mediator RuP2+ ([Ru(4,4-(PO3H2)2-2,2-bipyridine)(2,2-bipyridine)2]2+), and the WOC, Ru(bda)(py(CH2)(3or10)P(O3H)2)2 (bda is 2,2-bipyridine-6,6-dicarboxylate with x = 3 or 10), solar excitation resulted in photocurrents of ∼500 µA/cm2 and quantitative O2 evolution at pH 4.65. Related results were obtained for other Ru(II) polypyridyl mediators. For the organic dye PP (5-(4-(dihydroxyphosphoryl)phenyl)-10,15,20-Tris(mesityl)porphyrin), solar water oxidation occurred with a driving force near 0 V.

Controlling Vertical and Lateral Electron Migration Using a Bifunctional Chromophore Assembly in Dye-Sensitized Photoelectrosynthesis Cells.

Integration of photoresponsive chromophores that initiate multistep catalysis is essential in dye-sensitized photoelectrosynthesis cells and related devices. We describe here an approach that incorporates a chromophore assembly surface-bound to metal oxide electrodes for light absorption with an overlayer of catalysts for driving the half-reactions of water splitting. The assembly is a combination of a core-twisted perylene diimide and a ruthenium polypyridyl complex. By altering the connection sequence of the two subunits in the assembly, in their surface-binding to either TiO2 or NiO, the assembly can be tuned to convert visible light into strongly oxidizing equivalents for activation of an electrodeposited water oxidation catalyst (NiCo2O x) at the photoanode, or reducing equivalents for activation of an electrodeposited water reduction catalyst (NiMo0.05S x) at the photocathode. A key element in the design of the photoelectrodes comes from the synergistic roles of the vertical (interlayer) charge transfer and lateral (intralayer) charge hopping in determining overall cell efficiencies for photoelectrocatalysis.

Modulating Hole Transport in Multilayered Photocathodes with Derivatized p-Type Nickel Oxide and Molecular Assemblies for Solar-Driven Water Splitting.

For solar water splitting, dye-sensitized NiO photocathodes have been a primary target. Despite marginal improvement in performance, limitations remain arising from the intrinsic disadvantages of NiO and insufficient catalysis. We report here a new approach to modifying NiO photocathodes with doped NiO bilayers and an additional layer of macro-mesoporous ITO. The trilayered electrode is functionalized with a surface-attached ruthenium polypyridyl dye and a covalently bridged nickel-based hydrogen evolution catalyst. The NiO film, containing a 2% K+-doped NiO inner layer and a 2% Cu2+-doped NiO outer layer, provides sufficient driving force for hole transport following hole injection by the molecular assembly. Upon light irradiation, the resulting photocathode generates hydrogen from water sustainably with enhanced photocurrents and a Faradaic efficiency of ∼90%. This approach highlights the value of modifying both the internal and surface structure of NiO and provides insights into a new generation of dye-sensitized photocathodes for solar-driven water splitting cells.

Analysis of Homogeneous Water Oxidation Catalysis with Collector-Generator Cells.

A collector-generator (C-G) technique has been applied to determine the Faradaic efficiencies for electrocatalytic O2 production by the homogeneous water oxidation catalysts Ru(bda)(isoq)2 (1; bda = 2,2'-bipyridine and isoq = isoquinoline) and [Ru(tpy)(bpz)(OH2)](2+) (2; tpy = 2,2':6',2″-terpyridine and bpz = 2,2'-bipyrazine). This technique uses a custom-fabricated cell consisting of two fluorine-doped tin oxide (FTO) working electrodes separated by 1 mm with the conductive sides facing each other. With a catalyst in solution, water oxidation occurs at one FTO electrode under a sufficient bias to drive O2 formation by the catalyst; the O2 formed then diffuses to the second FTO electrode poised at a potential sufficiently negative to drive O2 reduction. A comparison of the current versus time response at each electrode enables determination of the Faradaic efficiency for O2 production with high concentrations of supporting electrolyte important for avoiding capacitance effects between the electrodes. The C-G technique was applied to electrocatalytic water oxidation by 1 in the presence of the electron-transfer mediator Ru(bpy)3(2+) in both unbuffered aqueous solutions and with the added buffer bases HCO3(-), HPO4(2-), imidazole, 1-methylimidazole, and 4-methoxypyridine. HCO3(-) and HPO4(2-) facilitate water oxidation by atom-proton transfer (APT), which gave Faradaic yields of 100%. With imidazole as the buffer base, coordination to the catalyst inhibited water oxidation. 1-Methylimidazole and 4-methoxypyridine gave O2 yields of 55% and 76%, respectively, with the lower Faradaic efficiencies possibly due to competitive C-H oxidation of the bases. O2 evolution by catalyst 2 was evaluated at pH 12 with 0.1 M PO4(3-) and at pH 7 in a 0.1 M H2PO4(-)/HPO4(2-) buffer. At pH 12, at an applied potential of 0.8 V vs SCE, water oxidation by the Ru(IV)(O)(2+) form of the catalyst gave O2 in 73% yield. In a pH 7 solution, water oxidation at 1.4 V vs SCE, which is dominated by Ru(V)(O)(3+), gave O2 with an efficiency of 100%. The lower efficiency for Ru(IV)(O)(2+) at pH 12 may be due to competitive oxidation of a polypyridyl ligand.

Large Hyperpolarizabilities at Telecommunication-Relevant Wavelengths in Donor-Acceptor-Donor Nonlinear Optical Chromophores.

Octopolar D2-symmetric chromophores, based on the MPZnM supermolecular motif in which (porphinato)zinc(II) (PZn) and ruthenium(II) polypyridyl (M) structural units are connected via ethyne linkages, were synthesized. These structures take advantage of electron-rich meso-arylporphyrin or electron-poor meso-(perfluoroalkyl)porphyrin macrocycles, unsubstituted terpyridyl and 4'-pyrrolidinyl-2,2';6',2″-terpyridyl ligands, and modulation of metal(II) polypyridyl-to-(porphinato)zinc connectivity, to probe how electronic and geometric factors impact the measured hyperpolarizability. Transient absorption spectra obtained at early time delays (tdelay < 400 fs) demonstrate fast excited-state relaxation, and formation of a highly polarized T1 excited state; the T1 states of these chromophores display expansive, intense T1 → T n absorption manifolds that dominate the 800-1200 nm region of the NIR, long (µs) triplet-state lifetimes, and unusually large NIR excited absorptive extinction coefficients [ε(T1 → T n ) ∼ 105 M-1 cm-1]. Dynamic hyperpolarizability (ßλ) values were determined from hyper-Rayleigh light scattering (HRS) measurements, carried out at multiple incident irradiation wavelengths spanning the 800-1500 nm spectral domain. The measured ßHRS value (4600 ± 1200 × 10-30 esu) for one of these complexes, RuPZnRu, is the largest yet reported for any chromophore at a 1500 nm irradiation wavelength, highlighting that appropriate engineering of strong electronic coupling between multiple charge-transfer oscillators provides a critical design strategy to realize octopolar NLO chromophores exhibiting large ßHRS values at telecom-relevant wavelengths. Generalized Thomas-Kuhn sum (TKS) rules were utilized to compute the effective excited-state-to-excited-state transition dipole moments from experimental linear-absorption spectra; these data were then utilized to compute hyperpolarizabilities as a function of frequency, that include two- and three-state contributions for both ß zzz and ß xzx tensor components to the RuPZnRu hyperpolarizability spectrum. This analysis predicts that the ß zzz and ß xzx tensor contributions to the RuPZnRu hyperpolarizability spectrum maximize near 1550 nm, in agreement with experimental data. The TKS analysis suggests that relative to analogous dipolar chromophores, octopolar supermolecules will be likely characterized by more intricate dependences of the measured hyperpolarizability upon irradiation wavelength due to the interactions among multiple different ß tensor components.