Self-Assembled Preparation of Porous Nickel Phosphide Superparticles with Tunable Phase and Porosity for Efficient Hydrogen Evolution.

Self-assembly of colloidal nanoparticles enables the easy building of assembly units into higher-order structures and the bottom-up preparation of functional materials. Nickel phosphides represent an important group of catalysts for hydrogen evolution reaction (HER) from water splitting. In this paper, the preparation of porous nickel phosphide superparticles and their HER efficiencies are reported. Ni and Ni2P nanoparticles are self-assembled into binary superparticles via an oil-in-water emulsion method. After annealing and acid etching, the as-prepared Ni-Ni2P binary superparticles change into porous nickel phosphide superparticles. The porosity and crystalline phase of the superparticles can be tuned by adjusting the ratio of Ni and Ni2P nanoparticles. The resulting porous superparticles are effective in driving HER under acidic conditions, and the modulation of porosity and phase further optimize the electrochemical performance. The prepared Ni3P porous superparticles not only possess a significantly enhanced specific surface area compared to solid Ni-Ni2P superparticles but also exhibit an excellent HER efficiency. The calculations based on the density functional theories show that the (110) crystal facet exhibits a relatively lower Gibbs free energy of hydrogen adsorption. This work provides a self-assembly approach for the construction of porous metal phosphide nanomaterials with tunable crystalline phase and porosity.

Superelastic Cobalt Silicate@Resorcinol Formaldehyde Resin Core-Shell Nanobelt Aerogel Monoliths with Outstanding Fire Retardant and Thermal Insulating Capability.

The practical applications of resorcinol formaldehyde resin (RFR) aerogels are prevented by their poor mechanical properties. Herein, a facile template-directed method is reported to produce macroscopic free-standing cobalt silicate (CS)@RFR core-shell nanobelt aerogels that display superelastic behavior and outstanding thermal insulating and fire-resistant capability. The synthesis relies on the polymerization of RFR on pre-formed CS nanobelts which leads to in situ formation of hydrogel monoliths that can be transformed to corresponding aerogels by a freeze-drying method. The composite nanobelt aerogel can withstand a compressive load of more than 4000 times of its own weight and fully recover after the removal of the weight. It can also sustain 1000 compressive cycles with 6.9% plastic deformation and 91.8% of the maximum stress remaining, with a constant energy loss coefficient as low as 0.16, at the set strain of 30%. The extraordinary mechanical properties are believed to be associated with the structural flexibility of the nanobelts and the RFR-reinforced joints between the crosslinked nanobelts. These inorganic-organic composite aerogels also show good thermal insulation and excellent fire-proof capability. This work provides an effective strategy for fabricating superelastic RFR-based aerogels which show promising applications in fields such as thermal insulation, energy storage, and catalyst support.

The Role of Zn Ions in the Structural, Surface, and Gas-Sensing Properties of SnO2:Zn Nanocrystals Synthesized via a Microwave-Assisted Route.

Although semiconducting metal oxide (SMOx) nanoparticles (NPs) have attracted attention as sensing materials, the methodologies available to synthesize them with desirable properties are quite limited and/or often require relatively high energy consumption. Thus, we report herein the processing of Zn-doped SnO2 NPs via a microwave-assisted nonaqueous route at a relatively low temperature (160 °C) and with a short treatment time (20 min). In addition, the effects of adding Zn in the structural, electronic, and gas-sensing properties of SnO2 NPs were investigated. X-ray diffraction and high-resolution transmission electron microscopy analyses revealed the single-phase of rutile SnO2, with an average crystal size of 7 nm. X-ray absorption near edge spectroscopy measurements revealed the homogenous incorporation of Zn ions into the SnO2 network. Gas sensing tests showed that Zn-doped SnO2 NPs were highly sensitive to sub-ppm levels of NO2 gas at 150 °C, with good recovery and stability even under ambient moisture. We observed an increase in the response of the Zn-doped sample of up to 100 times compared to the pristine one. This enhancement in the gas-sensing performance was linked to the Zn ions that provided more surface oxygen defects acting as active sites for the NO2 adsorption on the sensing material.

The Importance of the Macroscopic Geometry in Gas-Phase Photocatalysis.

Photocatalysis has the potential to make a major technological contribution to solving pressing environmental and energy problems. There are many strategies for improving photocatalysts, such as tuning the composition to optimize visible light absorption, charge separation, and surface chemistry, ensuring high crystallinity, and controlling particle size and shape to increase overall surface area and exploit the reactivity of individual crystal facets. These processes mainly affect the nanoscale and are therefore summarized as nanostructuring. In comparison, microstructuring is performed on a larger size scale and is mainly concerned with particle assembly and thin film preparation. Interestingly, most structuring efforts stop at this point, and there are very few examples of geometry optimization on a millimeter or even centimeter scale. However, the recent work on nanoparticle-based aerogel monoliths has shown that this size range also offers great potential for improving the photocatalytic performance of materials, especially when the macroscopic geometry of the monolith is matched to the design of the photoreactor. This review article is dedicated to this aspect and addresses some issues and open questions that arise when working with macroscopically large photocatalysts. Guidelines are provided that could help develop novel and efficient photocatalysts with a truly 3D architecture.

Gas-Phase Nitrogen Doping of Monolithic TiO2 Nanoparticle-Based Aerogels for Efficient Visible Light-Driven Photocatalytic H2 Production.

The development of visible light-active photocatalysts is essential for increasing the conversion efficiency of solar energy into hydrogen (H2). Here, we present a facile method for nitrogen doping of monolithic titanium dioxide (TiO2) nanoparticle-based aerogels to activate them for visible light. Plasma-enhanced chemical vapor deposition at low temperature enables efficient incorporation of nitrogen into preformed TiO2 aerogels without compromising their advantageous intrinsic characteristics such as large surface area, extensive porosity, and nanoscale properties of the semiconducting building blocks. By balancing the dopant concentration and the defects, the nitridation improves optical absorption and charge separation efficiency. The nitrogen-doped TiO2 nanoparticle-based aerogels loaded with palladium (Pd) nanoparticles show a significant enhancement in visible light-driven photocatalytic H2 production (3.1 mmol h-1 g-1) with excellent stability over 5 days. With this method, we introduce a powerful tool to tune the properties of nanoparticle-based aerogels after synthesis for a specific application, as exemplified by visible light-driven H2 production.

Synthesis of a rare-earth doped hafnia hydrosol: Towards injectable luminescent nanocolloids.

A major obstacle in the introduction of luminescent nanoparticles (NPs) for medical applications is that quantum dots, the most widely studied luminescent materials, despite being biologically safe after coating with a bioshell, still contain a toxic core mostly consisting of semi-conductor NPs, which are not approved by regulatory agencies. Here we point to a potential solution of this problem by using rare-earth (RE) doped hafnia NPs. Hafnia is approved for medical injections as an effective means for the treatment of radiosensitive and radioresistant tumors and can significantly decrease potential toxicity of RE ions. As a step towards the achievement of this goal we describe the development of a bio-friendly method for the preparation of a stable doped hafnia hydrosol with an isoelectric point (IEP) of 8.2, which shows high fluorescence and biocompatibility in regular coagulant tests and cytotoxic assays.

Carbon-metal interfaces analyzed by aberration-corrected TEM: how copper and nickel nanoparticles interact with MWCNTs.

Experimental confirmation for the stronger interaction of Ni with multi-walled carbon nanotubes (MWCNTs) compared to Cu with MWCNTs is presented. The interfaces between Cu (Ni) nanoparticles side-on oriented onto MWCNTs are analyzed with high spatial resolution electron energy-loss spectroscopy (EELS) of the carbon K-edge. The EEL spectra reveal a rehybridization from sp(2) to sp(3) hybridized carbon of the outermost MWCNT layer at the Ni interface, but no such rehybridization can be observed at the Cu interface. The EELS results are supported by transmission electron microscopy (TEM) images, which show a better wetting behavior of Ni and a smaller gap at the Ni-MWCNT interface, as compared to the corresponding Cu interfaces. The different behavior of Cu and Ni can be explained in terms of differing valence d-orbital occupancy. For the successful experimental demonstration of this effect the use of a soft chemical metal deposition technique is crucial.

Large-area alignment of tungsten oxide nanowires over flat and patterned substrates for room-temperature gas sensing.

Alignment of nanowires over a large area of flat and patterned substrates is a prerequisite to use their collective properties in devices such as gas sensors. In this work, uniform single-crystalline ultrathin W18 O49 nanowires with diameters less than 2 nm and aspect ratios larger than 100 have been synthesized, and, despite their flexibility, assembled into thin films with high orientational order over a macroscopic area by the Langmuir-Blodgett technique. Alignment of the tungsten oxide nanowires was also possible on top of sensor substrates equipped with electrodes. Such sensor devices were found to exhibit outstanding sensitivity to H2 at room temperature.

Superparamagnetic core-shell nanoparticles as solid supports for peptide synthesis.

Functional superparamagnetic core-shell nanoparticles are synthesized by a microwave assisted route and can be used as colloidal supports for peptide synthesis in "quasi solution".

Organic reaction pathways in the nonaqueous synthesis of metal oxide nanoparticles.

Nonaqueous-solution routes to metal oxide nanoparticles are a valuable alternative to the known aqueous sol-gel processes, offering advantages such as high crystallinity at low temperatures, robust synthesis parameters and ability to control the crystal growth without the use of surfactants. In the first part of the review we give a detailed overview of the various solution routes to metal oxides in organic solvents, with a strong focus on surfactant-free processes. In most of these synthesis approaches, the organic solvent plays the role of the reactant that provides the oxygen for the metal oxide, controls the crystal growth, influences particle shape, and, in some cases, also determines the assembly behavior. We have a closer look at the following reaction systems in this order: 1) metal halides in alcohols, 2) metal alkoxides, acetates, and acetylacetonates in alcohols, 3) metal alkoxides in ketones, and 4) metal acetylacetonates in benzylamine. All these systems offer some peculiarities with respect to each other, providing many possibilities to control and tailor the particle size and shape, as well as the surface and assembly properties. In the second part we present general mechanistic principles for aqueous and nonaqueous sol-gel processes, followed by the discussion of reaction pathways relevant for nanoparticle formation in organic solvents. Depending on the system several mechanisms have been postulated: 1) alkyl halide elimination, 2) elimination of organic ethers, 3) ester elimination, 4) C--C bond formation between benzylic alcohols and alkoxides, 5) ketimine and aldol-like condensation reactions, 6) oxidation of metal nanoparticles, and 7) thermal decomposition methods.