The footprint mismatch of cervical disc arthroplasty comes from degenerative factor besides ethnic factor.

A mismatch in footprints of cervical total disc arthroplasty (CTDA) implants occasionally occurred in Asian population and it had been attributed solely to ethnic factor. Yet, cervical degeneration process may play a role. Our purpose was to compare the cervical vertebra morphometric data with and without degeneration. The study included patients with CT scans of cervical spine from our hospital between January, 2019, and September, 2021. The total cervical degenerative index (TCDI) of each patient were collected by adding CDI score for 5 disc-levels. Patients were categorized into normal (TCDI 0-5) and degeneration groups (TCDI 6-60). Various measurements of the C3-C7 vertebral body and endplate were taken. Forty-nine patients in the normal group and 55 in the degeneration group were included. No significant difference was noted in gender, BH, BW, or BMI except age and TCDI (p < .001). During degeneration, disproportional endplate size changes were observed, with an increment ratio of 12-20% in the anteroposterior and 5-17% in the mediolateral plane throughout C3-C7, while vertebral body height remained constant. In conclusion, degeneration process, besides ethnic factor, causes the endplate size and shape mismatch. This information can help spine surgeon choose appropriate implants in CTDA surgery.

Impact of osteoporosis and Cement-Augmented fusion on adjacent spinal levels Post-Fusion Surgery: Patient-Specific finite element analysis.

Cement-augmentation is a technique commonly used during posterior lumbar instrumented fusion (PLIF) to reinforce compromised osteoporotic vertebral bone, minimize the risk of loosening screws, enhance stability, and improve overall surgical outcomes. In this study, we introduce a novel segmented vertebral body regional modeling approach to investigate the effects of osteoporosis and cement-augmented lumbar fusion on disc biomechanics at spinal levels adjacent to the fused vertebrae. Using our previously validated personalized-poroelastic-osteoligamentous FE model of the spine, fusion was simulated at L4-L5, and the biomechanics of adjacent levels were studied for 30 patients (non-osteoporotic patients (N = 15), osteoporotic patients (N = 15)). PLIF models, with and without cement-augmentation, were developed and compared after an 8 h-rest period (200 N), following a 16 h-cyclic compressive loading of 500-1000 N (40 and 20 min, respectively). Movement in different directions (flexion/ extension/ lateral bending/ axial rotation) was simulated using 10Nm moment before and after cyclic loading. The material mapping algorithm was validated by comparing the results of voxel-based and parametric models. The FE cement-augmented models, subject to daily activity loading, demonstrated significant differences in disc height loss and fluid loss as compared to non-cemented models. The calculated axial stress and fiber strain values were also significantly higher for these models. This work demonstrates that although osteoporosis does not significantly alter the time-dependent characteristics of adjacent IVDs post-surgery, cement-augmentation increases the risk of adjacent segment disease (ASD) incidence. A holistic understanding of the trade-offs and long-term complex interplay between structural reinforcement modalities, including cement augmentation, and altered biomechanics warrants further investigation.

The influence of over-distraction on biomechanical response of cervical spine post anterior interbody fusion: a comprehensive finite element study.

Introduction: Anterior cervical discectomy and fusion (ACDF) has been considered as the gold standard surgical treatment for cervical degenerative pathologies. Some surgeons tend to use larger-sized interbody cages during ACDF to restore the index intervertebral disc height, hence, this study evaluated the effect of larger-sized interbody cages on the cervical spine with ACDF under both static and cyclic loading. Method: Twenty pre-operative personalized poro-hyperelastic finite element (FE) models were developed. ACDF post-operative models were then constructed and four clinical scenarios (i.e., 1) No-distraction; 2) 1 mm distraction; 3) 2 mm distraction; and 4) 3 mm distraction) were predicted for each patient. The biomechanical responses at adjacent spinal levels were studied subject to static and cyclic loading. Non-parametric Friedman statistical comparative tests were performed and the p values less than 0.05 were reflected as significant. Results: The calculated intersegmental range of motion (ROM) and intradiscal pressure (IDP) from 20 pre-operative FE models were within the overall ranges compared to the available data from literature. Under static loading, greater ROM, IDP, facet joint force (FJF) values were detected post ACDF, as compared with pre-op. Over-distraction induced significantly higher IDP and FJF in both upper and lower adjacent levels in extension. Higher annulus fibrosus stress and strain values, and increased disc height and fluid loss at the adjacent levels were observed in ACDF group which significantly increased for over-distraction groups. Discussion: it was concluded that using larger-sized interbody cages (the height of ≥2 mm of the index disc height) can result in remarkable variations in biomechanical responses of adjacent levels, which may indicate as risk factor for adjacent segment disease. The results of this comprehensive FE investigation using personalized modeling technique highlight the importance of selecting the appropriate height of interbody cage in ACDF surgery.

Anatomical parameters alter the biomechanical responses of adjacent segments following lumbar fusion surgery: Personalized poroelastic finite element modelling investigations.

Introduction: While the short-term post-operative outcome of lumbar fusion is satisfying for most patients, adjacent segment disease (ASD) can be prevalent in long-term clinical observations. It might be valuable to investigate if inherent geometrical differences among patients can significantly alter the biomechanics of adjacent levels post-surgery. This study aimed to utilize a validated geometrically personalized poroelastic finite element (FE) modeling technique to evaluate the alteration of biomechanical response in adjacent segments post-fusion. Methods: Thirty patients were categorized for evaluation in this study into two distinct groups [i.e., 1) non-ASD and 2) ASD patients] based on other long-term clinical follow-up investigations. To evaluate the time-dependent responses of the models subjected to cyclic loading, a daily cyclic loading scenario was applied to the FE models. Different rotational movements in different planes were superimposed using a 10 Nm moment after daily loading to compare the rotational motions with those at the beginning of cyclic loading. The biomechanical responses of the lumbosacral FE spine models in both groups were analyzed and compared before and after daily loading. Results: The achieved comparative errors between the FE results and clinical images were on average below 20% and 25% for pre-op and post-op models, respectively, which confirms the applicability of this predictive algorithm for rough pre-planning estimations. The results showed that the disc height loss and fluid loss were increased for the adjacent discs in post-op models after 16 h of cyclic loading. In addition, significant differences in disc height loss and fluid loss were observed between the patients who were in the non-ASD and ASD groups. Similarly, the increased stress and fiber strain in the annulus fibrosus (AF) was higher in the adjacent level of post-op models. However, the calculated stress and fiber strain values were significantly higher for patients with ASD. Discussion: Evaluating the biomechanical response of pre-op and post-op modeling in the non-ASD and ASD groups showed that the inherent geometric differences among patients cause significant variations in the estimated mechanical response. In conclusion, the results of the current study highlighted the effect of geometrical parameters (which may refer to the anatomical conditions or the induced modifications regarding surgical techniques) on time-dependent responses of lumbar spine biomechanics.

Use of biphasic calcium phosphate versus demineralized bone matrix: retrospective clinical and CT analysis of posterolateral fusion results.

PURPOSE: Bone graft extenders have been developed to prevent donor site morbidity associated with iliac crest bone graft, but few studies compared the efficacy of various substitutes. Our purpose was to determine fusion rate and clinical outcome in patients undergoing lumbar arthrodesis using demineralized bone matrix (DBM) and biphasic calcium phosphate (BCP). METHODS: Patients with degenerative spondylolisthesis undergoing one-level or two-level arthrodesis of lumbar spine were retrospectively reviewed. Two treatment groups placed either BCP or DBM, in addition to local autograft in lumbar posterolateral space. Three-dimensional CT exam and dynamic flexion-extension radiographs at postoperative 2-year were assessed for posterolateral fusion status and pain scale and Oswestry Disability Index (ODI) for clinical outcome. RESULTS: Of the 148 patients reviewed (including 23 in one- and 58 patients in two-level in BCP group, and 47 in one- and 20 patients in two-level in DBM group), no significant differences were found in terms of age, sex, BMI, smoking, diabetes, steroids, number of level fused, non-union rate or revision surgery between BCP and DBM groups. Significantly improved pain scale of back and leg and ODI were found in both groups postoperatively without group difference. We found a comparable fusion rate in one-level surgery (100% versus 93.6%) and a superior fusion rate of BCP group in two-level surgery (98.3% versus 80.0%, p = 0.01). CONCLUSION: Being a bone graft extender without osteoinductive property, with local autograft, BCP is comparable to DBM for one- and superior for two-level fusion. No significant difference was found in clinical outcomes.

Novel MRI-based vertebral bone quality score as a predictor of cage subsidence following transforaminal lumbar interbody fusion.

OBJECTIVE: Decreased bone mineral density as measured by dual-energy x-ray absorptiometry (DEXA) has been reported to be associated with cage subsidence following transforaminal lumbar interbody fusion (TLIF). However, DEXA is not often available or routinely performed before surgery. A novel MRI-based vertebral bone quality (VBQ) score has been developed and reported to be correlated with DEXA T-scores. The authors investigated the ability of the VBQ score to predict cage subsidence and other risk factors associated with this complication. METHODS: In this retrospective study, the authors reviewed the records of patients who had undergone single-level TLIF from March 2014 to October 2015 and had a follow-up of more than 2 years. Cage subsidence was measured as postoperative disc height loss and was graded according to the system proposed by Marchi et al. The MRI-based VBQ score was measured on T1-weighted images. Univariable analysis and multivariable binary logistic regression analysis were performed. Ad hoc analysis with receiver operating characteristic curve analysis was performed to assess the predictive ability of the significant continuous variables. Additional analyses were used to determine the correlations between the VBQ score and T-scores and between the significant continuous variables and the amount of cage subsidence. RESULTS: Among 242 patients eligible for study inclusion, 111 (45.87%) had cage subsidence after the index operation. Multivariable logistic regression analyses demonstrated that an increased VBQ score (OR 14.615 ± 0.377, p < 0.001), decreased depth ratio (OR 0.011 ± 1.796, p = 0.013), and the use of kidney-shaped cages instead of bullet-shaped cages (OR 2.766 ± 0.358, p = 0.008) were associated with increased cage subsidence. The VBQ score was shown to significantly predict cage subsidence with an accuracy of 85.6%. The VBQ score was found to be moderately correlated with DEXA T-scores of the total hip (r = -0.540, p < 0.001) and the lumbar spine (r = -0.546, p < 0.001). The amount of cage subsidence was moderately correlated with the VBQ score (r = 0.512, p < 0.001). CONCLUSIONS: Increased VBQ scores, posteriorly placed cages, and kidney-shaped cages were risk factors for cage subsidence. The VBQ score was shown to be a good predictor of cage subsidence, was moderately correlated with DEXA T-scores for the total hip and lumbar spine, and also had a moderate correlation with the amount of cage subsidence.

ProDisc-C versus anterior cervical discectomy and fusion for the surgical treatment of symptomatic cervical disc disease: two-year outcomes of Asian prospective randomized controlled multicentre study.

PURPOSE: Our study aimed to evaluate non-inferiority of ProDisc-C to anterior cervical discectomy and fusion (ACDF) in terms of clinical outcomes and incidence of adjacent segment disease (ASD) at 24-months post-surgery in Asian patients with symptomatic cervical disc disease (SCDD). METHODS: This multicentre, prospective, randomized controlled trial was initiated after ethics committee approval at nine centres (China/Hong Kong/Korea/Singapore/Taiwan). Patients with single-level SCDD involving C3-C7-vertebral segments were randomized (2:1) into: group-A treated with ProDisc-C and group-B with ACDF. Assessments were conducted at baseline, 6-weeks, 3/6/12/18/24-months post-surgery and annually thereafter till 84-months. Primary endpoint was overall success at 24-months, defined as composite of: (1) ≥ 20% improvement in neck disability index (NDI); (2) maintained/improved neurologic parameters; (3) no implant removal/revision/re-operation at index level; and (4) no adverse/severe/life-threatening events. RESULTS: Of 120 patients (80ProDisc-C,40ACDF), 76 and 37 were treated as per protocol (PP). Overall success (PP) was 76.5% in group-A and 81.8% in group-B at 24-months (p = 0.12), indicating no clear non-inferiority of ProDisc-C to ACDF. Secondary outcomes improved for both groups with no significant inter-group differences. Occurrence of ASD was higher in group-B with no significant between-group differences. Range of motion (ROM) was sustained with ProDisc-C but lost with ACDF at 24-months. CONCLUSION: Cervical TDR with ProDisc-C is feasible, safe, and effective for treatment of SCDD in Asians. No clear non-inferiority was demonstrated between ProDisc-C and ACDF. However, patients treated with ProDisc-C demonstrated significant improvement in NDI, neurologic success, pain scores, and 36-item-short-form survey, along with ROM preservation at 24-months. Enrolment difficulties resulted in inability to achieve pre-planned sample size to prove non-inferiority. Future Asian-focused, large-scale studies are needed to establish unbiased efficacy of ProDisc-C to ACDF.

Minimal invasive fixation following with radiotherapy for radiosensitive unstable metastatic spine.

BACKGROUND: Minimally invasive surgery (MIS) has become a feasible option for patients with spinal metastasis, but the effectiveness of percutaneous pedicle screw fixation (PPSF) without decompression in patients with severe cord compression remains unknown. We compared PPSF without decompression with debulking surgery in patients with radiosensitive, unstable, metastatic thoracolumbar spinal cord compression. METHODS: A retrospective study of surgically treated spinal metastasis and spinal cord compression patients was conducted between October 2014 and June 2019. Demographic and pre- and postoperative data were collected and compared between patients treated with minimally invasive percutaneous fixation and external beam radiotherapy (EBRT) (the PPSF group) and those treated with debulking surgery (the debulking group). RESULTS: We included 50 patients in this study. The PPSF group had a significantly shorter operative time (143.56 ± 49.44 min vs. 181.47 ± 40.77 min; p < 0.01), significantly lower blood loss (116.67 ± 109.92 mL vs. 696.55 ± 519.43 mL; p < 0.01), and significantly shorter hospital stay (11.90 ± 9.69 vs. 25.35 ± 20.65; p < 0.01) than did the debulking group. No significant differences were observed between the groups in age, sex, spinal instability neoplastic score, ESCC, Tomita scores, numeric rating scale scores, American Spinal Injury Association Impairment Scale scores, survival rates, and complication rates. Postoperative neurologic function and decrease in pain were similar between the groups. CONCLUSION: The PPSF group had a shorter operation time, shorter length of hospital stay, and less blood loss than did the debulking group. PPSF followed by EBRT is pain relieving, relatively safe and appropriate as palliative therapy.

Comparisons of Lumbar Muscle Performance Between Minimally-Invasive and Open Lumbar Fusion Surgery at 1-Year Follow-Up.

STUDY DESIGN: Prospective study. OBJECTIVE: Minimally-invasive lumbar fusion surgery (MIS) is a viable alternative to conventional open surgery (COS) for spinal disorders. Although MIS seems to be associated with less para-spinal muscle trauma, the actual back muscle performance after MIS and COS remain controversial. This study investigated post-operative para-spinal muscle performance, and the correlation between muscle dysfunction and clinical outcome. METHODS: In this prospective, non-randomized control study, 50 patients were enrolled and split into 2 groups: COS and MIS. We established a biomechanical model of the para-spinal muscle in the lumbar spine using electromyography (EMG) and specific muscle function tests. Functional outcomes were also reviewed and analyzed. All patients underwent EMG pre-operatively, and at 3 months and 1 year post-operatively. The para-spinal muscle performance was investigated by comparing the back muscle co-contraction ratio and the load transmission zone to the pre-operative data. RESULTS: Twenty-one patients in the COS group and 25 in the MIS group completed the study. Both groups showed a significant improved functional score. The abdominal and back muscle strengths were decreased post-operatively, and were then increased at 12 months post-operatively in both groups. During the perturbed balance task and static task, the MIS group exhibited a trend of recovery in comparison with the COS group. But, the back muscle performance at 12 months was poorer than the pre-op performance in both groups. CONCLUSIONS: There was no significant difference in clinical outcome and para-spinal muscle performance between groups. In both methods, the global muscle function had declined post-operatively.

Mir-573 regulates cell proliferation and apoptosis by targeting Bax in human degenerative disc cells following hyperbaric oxygen treatment.

BACKGROUND: MicroRNA (miRNA) plays a vital role in the intervertebral disc (IVD) degeneration. The expression level of miR-573 was downregulated whereas Bax was upregulated notably in human degenerative nucleus pulposus cells. In this study, we aimed to investigate the role of miR-573 in human degenerative nucleus pulposus (NP) cells following hyperbaric oxygen (HBO) treatment. METHODS: NP cells were separated from human degenerated IVD tissues. The control cells were maintained in 5% CO2/95% air and the hyperoxic cells were exposed to 100% O2 at 2.5 atmospheres absolute. MiRNA expression profiling was performed via microarray and confirmed by real-time PCR, and miRNA target genes were identified using bioinformatics and luciferase reporter assays. The mRNA and protein levels of Bax were measured. The proliferation of NPCs was detected using MTT assay. The protein expression levels of Bax, cleaved caspase 9, cleaved caspase 3, pro-caspase 9, and pro-caspase 3 were examined. RESULTS: Bioinformatics analysis indicated that the 3' untranslated region (UTR) of the Bax mRNA contained the "seed-matched-sequence" for hsa-miR-573, which was validated via reporter assays. MiR-573 was induced by HBO and simultaneous suppression of Bax was observed in NP cells. Knockdown of miR-573 resulted in upregulation of Bax expression in HBO-treated cells. In addition, overexpression of miR-573 by HBO increased cell proliferation and coupled with inhibition of cell apoptosis. The cleavage of pro-caspase 9 and pro-caspase 3 was suppressed while the levels of cleaved caspase 9 and caspase 3 were decreased in HBO-treated cells. Transfection with anti-miR-573 partly suppressed the effects of HBO. CONCLUSION: Mir-573 regulates cell proliferation and apoptosis by targeting Bax in human degenerative NP cells following HBO treatment.

Degenerative cervical myelopathy presenting as subjective lower limb weakness could be a trap towards misdiagnosis.

When patients presenting with subjective lower limb weakness (SLLW) are encountered, it is natural to suspect a lumbar pathology and proceed with related clinical examination, investigations and management. However, SLLW could be a sign of degenerative cervical myelopathy (DCM) due to an evolving cord compression. In such circumstances, if symptoms are not correlated to myelopathy at the earliest, there could be potential complications over time. In this study, we intend to analyse the outcomes after surgical management of the cervical or thoracic cord compression in patients with SLLW. Retrospectively, patients who presented to our center during the years 2010-2016 with sole complaint of bilateral SLLW but radiologically diagnosed to have a solitary cervical or thoracic stenosis, or tandem spinal stenosis and underwent surgical decompression procedures were selected. Their clinical presentation was categorised into three types, myelopathy was graded using Nurick's grading and JOA scoring; in addition, their lower limb functional status was assessed using the lower extremity functional scale (LEFS). Functional recovery following surgery was assessed at 6 weeks, 3 months, 6 months, one year, and two years. Selected patients (n = 24; Age, 56.4 ± 10.1 years; range 32-78 years) had SLLW for a period of 6.4 ± 3.2 months (range 2-13 months). Their preoperative JOA score was 11.3 ± 1.8 (range 7-15), and LEFS was 34.4 ± 7.7 (range 20-46). Radiological evidence of a solitary cervical lesion and tandem spinal stenosis was found in 6 and 18 patients respectively. Patients gradually recovered after surgical decompression with LEFS 59.8 ± 2.7 (range 56-65) at 1 year and JOA score 13.6 ± 2.7 (range - 17 to 100) at 2 years. The recovery rate at final follow up was 47.5%. Our results indicate the importance of clinically suspecting SLLW as an early non-specific sign of DCM to avoid misdiagnosis, especially in patients without conventional upper motor neuron signs. In such cases, surgical management of the cord compression resulted in significant functional recovery and halted the progression towards permanent disability.

Comparison of paraspinal muscle degeneration and decompression effect between conventional open and minimal invasive approaches for posterior lumbar spine surgery.

Laminotomy and transforaminal lumbar interbody fusion (TLIF) is usually used to treat unstable spinal stenosis. Minimally invasive surgery (MIS) can cause less muscle injury than conventional open surgery (COS). The purpose of this study was to compare the degree of postoperative fatty degeneration in the paraspinal muscles and the spinal decompression between COS and MIS based on MRI. Forty-six patients received laminotomy and TLIF (21 COS, 25 MIS) from February 2016 to January 2017 were included in this study. Lumbar MRI was performed within 3 months before surgery and 1 year after surgery to compare muscle-fat-index (MFI) change of the paraspinal muscles and the dural sac cross-sectional area (DSCAS) change. The average MFI change at L2-S1 erector spinae muscle was significantly greater in the COS group (27.37 ± 21.37% vs. 14.13 ± 19.19%, P = 0.044). A significant MFI change difference between the COS and MIS group was also found in the erector spinae muscle at the caudal adjacent level (54.47 ± 37.95% vs. 23.60 ± 31.59%, P = 0.016). DSCSA improvement was significantly greater in the COS group (128.15 ± 39.83 mm2 vs. 78.15 ± 38.5 mm2, P = 0.0005). COS is associated with more prominent fatty degeneration of the paraspinal muscles. Statically significant post-operative MFI change was only noted in erector spinae muscle at caudal adjacent level and L2-S1 mean global level. COS produces a greater area of decompression on follow up MRI than MIS with no statistical significance on clinical grounds.

Development of a novel geometrically-parametric patient-specific finite element model to investigate the effects of the lumbar lordosis angle on fusion surgery.

The success of lumbar interbody fusion, the key surgical procedure for treating different pathologies of the lumbar spine, is highly dependent on determining the patient-specific lumbar lordosis (LL) and restoring sagittal balance. This study aimed to (1) develop a personalized finite element (FE) model that automatically updates spinal geometry for different patients; and (2) apply this technique to study the influence of LL on post-fusion spinal biomechanics. Using an X-Ray image-based algorithm, the geometry of the lumbar spine (L1-S1) was updated using independent parameters. Ten subject-specific nonlinear osteoligamentous FE models were developed based on pre-operative images of fusion surgery candidate patients. Post-operative FE models of the same patients were consequently created. Comparison of the obtained results from FE models with pre- and post-operation functional images demonstrated the potential value of this technique in clinical applications. A parametric study of the effect of LL was conducted for cases with zero LL angle, positive LL angles (+6° and +12°) and negative LL angles (-3° and -6°) on fused level (L4-L5), resulting in a total of 50 fusion simulation models. The average range of motion, intradiscal pressure, and fiber strain at adjacent levels were significantly higher with decreased LL during different directions except axial rotation. This study demonstrates that the LL alters both the intersegmental motion and load-sharing in fusion, which may influence the initiation and rate of adjacent level degeneration. This personalized FE platform provides a practical, clinically applicable approach for the analyses of the biomechanical changes associated with lumbar spine fusion.

Correction to: Staged surgery for tandem cervical and lumbar spinal stenosis: Which should be treated first?

The authors would like to acknowledge the following funding information that was missing in.

Risk factors of neurological deficit and pulmonary cement embolism after percutaneous vertebroplasty.

BACKGROUND: The risk factors, incidence, and clinical management of pulmonary cement embolism and neurological deficit during percutaneous vertebroplasty (PVP) were evaluated. METHODS: Three thousand one hundred and seventy-five patients with symptomatic osteoporotic vertebral compression fractures (OVCFs) treated with PVP were retrospectively reviewed in a single institution. Clinical parameters such as age, gender, number of fractures, and time from fracture to vertebroplasty were recorded at the time of surgery. Image and surgical parameters including the amount of cement, the vertebral level, uni- or bipedicle surgical approach, and leakage pattern were recorded. RESULTS: Type-C leakage, including paraspinal (25%), intradiscal (26%), and posterior (0.7%) leakage, was more common than type-B (11.4%) and type-S leaks (4.9%). Cement leakage into the spinal canal (type-C posterior) occurred in 26 patients (0.7%), and four patients needed surgical decompression. Three in nine patients with leakage into thoracic spine needed decompressive surgery, but only one of 17 patients into lumbar spine needed surgery (p < 0.01). Age, gender, number of fractures, and time from fracture to vertebroplasty were not risk factors of pulmonary cement embolism or neurological deficit. The risk factor of pulmonary cement embolism was higher volume of PMMA injected (p < 0.001) and risk factor of neurological deficit was type-C posterior cement leakage into thoracic spine. The incidence of pulmonary cement embolism was significantly high in the volume of PMMA injected (PMMA injection < 3.5 cc: 0%; 3.5-7.0 cc: 0.11%; > 7.0 cc: 0.9%; p < 0.01) which needed postoperative oxygen support. CONCLUSIONS: Cement leakage is relatively common but mostly of no clinical significance. Percutaneous vertebroplasty in thoracic spine and high amount of PMMA injected should be treated with caution in clinical practice.

The correlations between the anchor density and the curve correction of adolescent idiopathic scoliosis surgery.

BACKGROUND: The optimal anchor density in adolescent idiopathic scoliosis (AIS) surgery to achieve good curve correction remains unclear. The purpose of the study is to analyze the correlations between three-dimensional curve correction and anchor density in the pedicle screw-based posterior fusion of AIS. METHODS: One hundred and twenty-seven AIS patients receiving primary posterior fusion with pedicle screw instrumentation were retrospectively reviewed. Anchor density (AD) was defined as the screws number per fused spinal segment. The correlations between three-dimensional curve correction radiographic parameters and anchor density were analyzed with subgroup analysis based on different curve types, curve magnitudes, and curve flexibilities. The differences of curve correction parameters between the low-density (AD ≤1.4), middle-density (1.4 < AD ≤1.7) and high-density (AD > 1.7) groups were also calculated. Independent t-test, analysis of variance (ANOVA), and Pearson's correlation coefficient were used for statistical analysis. RESULTS: There were no correlations between the anchor density and the coronal curve correction or apical vertebral rotation (AVR) correction. In the sagittal plane, mild positive correlations existed between anchor density and thoracic kyphosis correction in all patients (r = 0.27, p = 0.002). Subgroup analysis revealed similar mild positive correlations in Lenke 1 (r = 0.31, p = 0.02), Lenke 1-3 (r = 0.27, p = 0.01), small curves (40°-60°, r = 0.38, p <  0.001), and flexible curves (flexibility > 40%, r = 0.34, p = 0.01). There were no differences between low-density (mean 1.31), middle-density (mean 1.55), and high-density (mean 1.83) in terms of coronal or axial curve correction parameters. Low-density group has longer fused level (mean difference 2.14, p = 0.001) and smaller thoracic kyphosis correction (mean difference 9.25°, p = 0.004) than high-density group. CONCLUSION: In our study, the anchor density was not related to coronal or axial curve corrections. Mild positive correlations with anchor density were found in thoracic kyphosis correction, especially in patients with smaller and flexible curves. Low anchor density with longer fusion level achieves similar curve corrections with middle or high anchor density in adolescent idiopathic scoliosis surgery.

Bone regeneration in Ds-Red pig calvarial defect using allogenic transplantation of EGFP-pMSCs - A comparison of host cells and seeding cells in the scaffold.

BACKGROUND: Cells, scaffolds, and factors are the triad of regenerative engineering; however, it is difficult to distinguish whether cells in the regenerative construct are from the seeded cells or host cells via the host blood supply. We performed a novel in vivo study to transplant enhanced green fluorescent pig mesenchymal stem cells (EGFP-pMSCs) into calvarial defect of DsRed pigs. The cell distribution and proportion were distinguished by the different fluorescent colors through the whole regenerative period. METHOD/RESULTS: Eight adult domestic Ds-Red pigs were treated with five modalities: empty defects without scaffold (group 1); defects filled only with scaffold (group 2); defects filled with osteoinduction medium-loaded scaffold (group 3); defects filled with 5 x 103 cells/scaffold (group 4); and defects filled with 5 x 104 cells/scaffold (group 5). The in vitro cell distribution, morphology, osteogenic differentiation, and fluorescence images of groups 4 and 5 were analyzed. Two animals were sacrificed at 1, 2, 3, and 4 weeks after transplantation. The in vivo fluorescence imaging and quantification data showed that EGFP-pMSCs were represented in the scaffolds in groups 4 and 5 throughout the whole regenerative period. A higher seeded cell density resulted in more sustained seeded cells in bone regeneration compared to a lower seeded cell density. Host cells were recruited by seeded cells if enough space was available in the scaffold. Host cells in groups 1 to 3 did not change from the 1st week to 4th week, which indicates that the scaffold without seeded cells cannot recruit host cells even when enough space is available for cell ingrowth. The histological and immunohistochemical data showed that more cells were involved in osteogenesis in scaffolds with seeded cells. CONCLUSION: Our in vivo results showed that more seeded cells recruit more host cells and that both cell types participate in osteogenesis. These results suggest that scaffolds without seeded cells may not be effective in bone transplantation.

In Vitro Biomechanical Validation of a Self-Adaptive Ratchet Growing Rod Construct for Fusionless Scoliosis Correction.

STUDY DESIGN: In vitro biomechanical evaluation of a novel self-adaptive unidirectional ratchet growing rod (RGR) system. OBJECTIVE: The aim of this study was to propose and biomechanically validate a novel RGR construct in vitro using porcine thoracic spines and calculate the tensile force required to elongate the RGR with springs, without springs, and with soft tissue encapsulation (induced in vivo in rabbits). SUMMARY OF BACKGROUND DATA: Literature lacks clear consensus regarding the implant of choice for early-onset scoliosis. Multiple systems are currently available, and each has its own advantages and disadvantages. Therefore, studying novel designs that can credibly accommodate growth and curb deformity progression is of principle importance. METHODS: In vitro biomechanical motion tests were done using six porcine thoracic spines with pedicle screws at T3 and T8. A pure moment of ±5 Nm was loaded in lateral bending (LB) and flexion-extension. Range of motion (ROM) and neutral zone (NZ) of each specimen was determined after connecting the free movable growing rods (FGRs), RGRs, and standard rods (SRs). Tensile tests were done to measure the force required to elongate the RGR with springs, without springs, and with soft tissue encapsulation (induced in vivo in rabbits). RESULTS: Global ROM, implanted T3-T8 ROM, and the NZ of specimens with FGRs and RGRs were significantly higher than that with SRs. The RGRs favored unidirectional elongation in both LB and flexion. The tensile forces required for elongating the RGR without springs, with springs, and with soft tissue capsulation (by a scaled unit of 3 mm) were 3 ±â€Š1.3 N, 10.5 ±â€Š0.4 N, and 48.4 ±â€Š14.4 N, respectively. CONCLUSION: The RGR could stabilize and favor unidirectional elongation of the implanted spinal column when appropriate forces were present. There was no device failure as far as we have studied and it is anticipated that, with further safety and feasibility assessment, RGRs could be adapted for clinical use. LEVEL OF EVIDENCE: N/A.

Minimally Invasive Transforaminal Lumbar Interbody Debridement and Fusion with Percutaneous Pedicle Screw Instrumentation for Spondylodiscitis.

BACKGROUND: Minimally invasive transforaminal lumbar interbody debridement and fusion (MiTLIDF) with percutaneous pedicle screw instrumentation (PSI) is a less invasive treatment for lumbar spondylodiscitis. METHODS: Patients with single-level lumbar spondylodiscitis were surgically treated by interbody debridement and fusion through an anterior or transforaminal approach combined with open or percutaneous PSI (group A: anterior debridement and interbody fusion with open posterior PSI; group B: transforaminal lumbar interbody debridement and fusion [TLIDF] with open posterior PSI; group C: anterior debridement and interbody fusion with percutaneous PSI; group D: MiTLIDF with percutaneous PSI). Perioperative data, fusion status, infection-free survival, and clinical outcome measurements were compared among the 4 surgical groups. RESULTS: A total of 82 patients were included in this study. TLIDF was associated with shorter operative time when compared with the anterior approach (group A: 302.8 ± 59.9 minutes; group B: 209.2 ± 31.0 minutes; group C: 260.6 ± 62.5 minutes; group D: 207.1 ± 33.6 minutes; P < 0.001). Percutaneous PSI resulted in less intraoperative blood loss (group A: 907.5 ± 253.7 mL; group B: 859.4 ± 201.2 mL; group C: 532.9 ± 193.7 mL; group D: 399.1 ± 84.3 mL) and reduced immediate postoperative pain (group A: 5.5 ± 0.9; group B: 4.9 ± 0.9; group C: 3.9 ± 0.7; group D: 3.2 ± 0.7) than open PSI (P < 0.001). There were no significant differences in terms of overall infection-free survival (P = 0.936). CONCLUSIONS: This study demonstrated MiTLIDF with percutaneous PSI is a safe and effective treatment for lumbar spondylodiscitis while incurring no adverse effects in terms of fusion rate, functional recovery, and infection eradication.

Staged surgery for tandem cervical and lumbar spinal stenosis: Which should be treated first?

PURPOSE: Tandem spinal stenosis (TSS) refers to lumbar and cervical spinal canal stenosis. Staged surgery is often chosen, but sometimes, mere decompression of one stenosis is adequate to relieve symptoms. Therefore, we intend to analyze whether starting with the cervical or the lumbar region is the most logical option. METHODS: We retrospectively reviewed the data of 47 patients with TSS, having first-stage decompression for the most symptomatic stenosis, and classified into two groups (Group A: lumbar decompression first, Group B: cervical decompression first). Postoperative outcomes were analyzed for at least 2 years, and they were cautiously watched for symptoms of the non-operated stenosis; if such symptoms were debilitating, second-stage surgery for the non-operated stenosis was done. RESULTS: The demographic characteristics of Group A (n = 11) and Group B (n = 36) were comparable. One patient (9%) in Group A and 25 patients (67%) in Group B had resolution of symptoms and good functional recovery. The need for a second-stage surgery for the non-operated stenosis was significantly high (p = 0.001) among patients in Group A. They suffered a significant worsening of both the mJOA score and the Nurick's grade; whereas, patients in Group B experienced staged improvement of both scales. CONCLUSION: First-stage surgery for the cervical stenosis significantly lowers the need of the second-stage surgery. In contrast, if lumbar stenosis was treated first, a dramatic exacerbation of the symptoms related to the cervical stenosis can occur soon. Therefore, treatment of cervical stenosis first seems to be more appropriate. These slides can be retrieved under Electronic Supplementary Material.