Chemiluminescence immunoassays for estradiol and ethinylestradiol based on new biotinylated estrogen derivatives.

New chemiluminescence-based immunoassays for sensitive detection of 17-ß estradiol (E2) and ethinylestradiol (EE2) are described on the basis of the use of biotinylated estrogen derivatives. Estrogen derivatives bearing a carboxylic group (E2-COOH and EE2-COOH) on C-3 position were synthesized, covalently bound to aminated biotin and subsequently immobilized on avidin-coated microtiter plates. The assay principle was based on competition between free and immobilized estrogens for their binding to primary antibodies, with subsequent revelation using horseradish peroxidase (HRP)-labeled secondary antibodies. Under optimized conditions, the chemiluminescence immunoassays showed a highly sensitive response to E2 and EE2, with respective detection limits of 0.5 and 1.2 ng L-1. The LOD achieved using biotinylated E2 was in the same order of magnitude as those obtained using commercially available E2-bovine serum albumin conjugate (E2-BSA). The developed devices were successfully applied to analysis wastewater treatment plants effluents (WWTP) with negligible matrix effect.

Molecularly imprinted polymer cartridges coupled to high performance liquid chromatography (HPLC-UV) for simple and rapid analysis of fenthion in olive oil.

A combination of molecular modelling and a screening of the library of non-imprinted polymers (NIPs) was used to identify acrylamide as a functional monomer with high affinity towards fenthion, organophosphate insecticide, which is frequently used in the treatment of olives. A good correlation was found between the screening tests and modelling of monomer-template interactions performed using a computational approach. Acrylamide-based molecularly imprinted polymer (MIP) and non-imprinted polymer (NIP) were thermally synthesised in dimethyl formamide (porogen) using ethylene glycol dimethacrylate as a cross-linker and 1,1-azo-bis (isobutyronitrile) as an initiator. The chemical and physical properties of the prepared polymers were characterised. The binding of fenthion by the polymers was studied using solvents with different polarities. The developed MIP showed a high selectivity towards fenthion, compared to other organophosphates (dimethoate, methidathion malalthion), and allowed extraction of fenthion from olive oil samples with a recovery rate of about 96%. The extraction of fenthion using MIPs was much more effective than traditional C18 reverse-phase solid phase extraction and allowed to achieve a low detection limit (LOD) (5 µg L(-1)).

Computational and experimental investigation of molecular imprinted polymers for selective extraction of dimethoate and its metabolite omethoate from olive oil.

This work presents the development of molecularly imprinted polymers (MIPs) for the selective extraction of dimethoate from olive oil. Computational simulations allowed selecting itaconic acid as the monomer showing the highest affinity towards dimethoate. Experimental validation confirmed modelling predictions and showed that the polymer based on IA as functional monomer and omethoate as template molecule displays the highest selectivity for the structurally similar pesticides dimethoate, omethoate and monocrotophos. Molecularly imprinted solid phase extraction (MISPE) method was developed and applied to the clean-up of olive oil extracts. It was found that the most suitable solvents for loading, washing and elution step were respectively hexane, hexane-dichloromethane (85:15%) and methanol. The developed MIPSE was successfully applied to extraction of dimethoate from olive oil, with recovery rates up to 94%. The limits of detection and quantification of the described method were respectively 0.012 and 0.05 µg g(-1).

Immunosensors for estradiol and ethinylestradiol based on new synthetic estrogen derivatives: application to wastewater analysis.

Novel electrochemical immunosensors for sensitive detection of 17-ß estradiol (E2) and ethinylestradiol (EE2) are described on the basis of the use of magnetic beads (MBs) as solid support and screen-printed electrodes as sensing platforms. Four synthetic estrogen derivatives containing either a carboxylic group or an amine group at the C-3 position were synthesized and covalently bound to MBs functionalized with amine or carboxyl groups, respectively. The assay was based on competition between the free and immobilized estrogen for the binding sites of the primary antibody, with subsequent revelation using alkaline phosphatase-labeled secondary antibody. Preliminary colorimetric tests were performed in order to validate the applicability of the synthetic estrogens to immuno-recognition and to optimize different experimental parameters. In a second step, electrochemical detection was carried out by square wave voltammetry (SWV). Under the optimized working conditions, the electrochemical immunosensors showed a highly sensitive response to E2 and EE2, with respective detection limits of 1 and 10 ng/L. Cross-reactivity evaluated against other hormones demonstrated an excellent selectivity. The developed devices were successfully applied to analysis of spiked and natural water samples. These new immunosensors offer the advantages of being highly sensitive, easy, and rapid to prepare, with a short assay time.

Acetylcholinesterase immobilized on magnetic beads for pesticides detection: application to olive oil analysis.

This work presents the development of bioassays and biosensors for the detection of insecticides widely used in the treatment of olive trees. The systems are based on the covalent immobilisation of acetylcholinesterase on magnetic microbeads using either colorimetry or amperometry as detection technique. The magnetic beads were immobilised on screen-printed electrodes or microtitration plates and tested using standard solutions and real samples. The developed devices showed good analytical performances with limits of detection much lower than the maximum residue limit tolerated by international regulations, as well as a good reproducibility and stability.

Molecular imprinting solid phase extraction for selective detection of methidathion in olive oil.

A specific adsorbent for extraction of methidathion from olive oil was developed. The design of the molecularly imprinted polymer (MIP) was based on the results of the computational screening of the library of polymerisable functional monomers. MIP was prepared by thermal polymerisation using N,N'-methylene bisacrylamide (MBAA) as a functional monomer and ethylene glycol dimethacrylate (EGDMA) as a cross-linker. The polymers based on the itaconic acid (IA), methacrylic acid (MAA) and 2-(trifluoromethyl)acryl acid (TFMAA) functional monomers and one control polymer which was made without functional monomers with cross-linker EGDMA were also synthesised and tested. The performance of each polymer was compared using corresponding imprinting factor. As it was predicted by molecular modelling the best results were obtained for the MIP prepared with MBAA. The obtained MIP was optimised in solid-phase extraction coupled with high performance liquid chromatography (MISPE-HPLC-UV) and tested for the rapid screening of methidathion in olive oil. The proposed method allowed the efficient extraction of methidathion for concentrations ranging from 0.1 to 9 mg L(-1) (r(2)=0.996). The limits of detection (LOD) and quantification (LOQ) in olive oil were 0.02 mg L(-1) and 0.1 mg L(-1), respectively. MIPs extraction was much more effective than traditional C18 reverse-phase solid phase extraction.

Site-specific immobilization of a (His)6-tagged acetylcholinesterase on nickel nanoparticles for highly sensitive toxicity biosensors.

This paper reports site-specific affinity immobilization of (His)6-tagged acetylcholinesterase (AChE) onto Ni/NiO nanoparticles for the development of an electrochemical screen-printed biosensor for the detection of organophosphate pesticides. The method is based on the specific affinity binding of the His-tagged enzyme to oxidized nickel nanoparticle surfaces in the absence of metal chelators. This approach allows stable and oriented attachment of the enzyme onto the oxidized nickel through the external His residue in one-step procedure, allowing for fast and sensitive detection of paraoxon in the concentration range from 10(-8) to 10(-13) M. A detection limit of 10(-12) M for paraoxon was obtained after 20 min incubation. This method can be used as a generic approach for the immobilization of other His-tagged enzymes for the development of biosensors.

Screen-printed electrode based on AChE for the detection of pesticides in presence of organic solvents.

A screen-printed biosensor for the detection of pesticides in water miscible organic solvents is described based on the use of p-aminophenyl acetate as acetylcholinesterase substrate. The oxidation of p-aminophenol, product of the enzymatic reaction was monitored at 100 mV vs. Ag/AgCl screen-printed reference electrode. Miscible organic solvents as ethanol and acetonitrile were tested. The acetylcholinesterase (AChE) was immobilised on a screen-printed electrode surface by entrapment in a PVA-SbQ polymer and the catalytic activity of immobilised AChE was studied in the presence of different percentages of organic solvents in buffer solution. The sensor shows good characteristics when experiments were performed in concentrations of organic solvents below 10%. No significant differences were observed when working with 1 and 5% acetonitrile in the reaction media. Detection limits as low as 1.91x10(-8) M paraoxon and 1.24x10(-9) M chlorpyrifos ethyl oxon were obtained when experiments are carried out in 5% acetonitrile.