Investigation of the Use of Hollow Elastic Biomodels Produced by Additive Manufacturing for Clip Choice and Surgical Simulation in Microsurgery for Intracranial Aneurysms.

BACKGROUND: Intracranial aneurysms (IAs) are dilatations of the cerebral arteries, whose treatment is commonly based on the implant of a metallic clip on the aneurysm neck. Despite the dissection and understanding of the surgical anatomy of the IA when often only parts of it are visible, the choice of the ideal clip to be used is one of the surgical difficulties. Although current imaging tests guarantee IA visualization, currently there is no planning method that allows for a real three-dimensional (3D) visualization for optimal choice of clip prior to surgery. The aim of this study is to evaluate whether IA biomodels generated by additive manufacturing methods are useful for surgical clip selection in microsurgeries for IA. METHODS: Three-dimensional (3D) IA biomodels of 10 patients with IA were evaluated using computerized tomography, surgical microscope, and 3D printer. The research was divided into 4 phases as follows: development of the 3D biomodels, evaluation of the biomodel dimensional characteristics, surgical planning evaluation with the biomodel and its clipping effectiveness, and evaluation of the actual surgical simulation process within the models. RESULTS: Ten 3D biomodels were obtained, made of a malleable and hollow part, formed by the IA and related arteries, and another rigid part, mimicking the skull and other arteries of the skull base. Based on these 3D models, 10 clips were chosen during the surgical planning, and all exactly matched the clip characteristics used during the actual surgeries. The surgical simulation with the biomodels performed by 2 neurosurgeons still in training obtained 100% accuracy in the identification of the clips that were eventually used during the actual surgeries. CONCLUSIONS: 3D biomodels generated by additive manufacturing methods were effective for surgical clip selection in microsurgeries for IA, reducing surgical time, increasing cerebral angioarchitecture understanding, and providing more safety in this type of surgery.

Effects of hydrotherapy and tactile-kinesthetic stimulation on weight gain of preterm infants admitted in the Neonatal Intensive Care Unit

Abstract Objective: The present study aimed to evaluate the effects of hydrotherapy and tactile-kinesthetic stimulation on the birth weight of preterm infants admitted in the Neonatal Intensive Care Unit. Method: It was a randomized controlled trial, without blinding, in which 44 preterm infants of both sexes with gestational age between 32 and 34 weeks were included into two groups: hydrotherapy group (n = = 22) and tactile-kinesthetic stimulation group (n = 22). Weight gain was the parameter assessed daily. Results: In the tactile-kinesthetic stimulation group there was a variation in weight gain, but without significant difference (p = 0,43). However, in the hydrotherapy group, it was observed that increased weight gain started from the 2nd day (p < 0,001). Conclusions: Hydrotherapy group presented significantly increased weight after the interventions, indicating that this technique can interfere with weight gain in preterm infants.

Ergonomics of anatomical bra models for breastfeeding: a contribution of nursing / Ergonomía de modelos anatómicos de sostén para lactancia materna: una contribución de la enfermería / Ergonomia de modelos anatômicos de sutiã para amamentação: uma contribuição da enfermagem

ABSTRACT Objectives: to analyze the ergonomics of two models of breastfeeding bras. Methods: descriptive study carried out with 152 infants in a Brazilian university hospital. The prototypes were separated into two groups (A and B). To compare the two bra models, the Odds Ratio (OR) was used as a measure of the strength of the association. In subjective perceptions, the Modified Borg Scale, and the chi-square test of independence (χ2) were used. To compare the two prototypes, the Z test and logistic regression analysis were performed. A significance level of 5% was considered. Results: the bra in group B was more suitable for ergonomics of physical and psycho-aesthetic comfort than the bra in group A (p < 0.0001), according to the logistic regression tests. Conclusions: modeling B was ergonomically adequate, with usability and evaluation criteria centered on breastfeeding women.

RESUMEN Objetivos: analizar la ergonomía de dos modelados de sostén para lactancia materna. Métodos: estudio descriptivo realizado con 152 lactantes en un hospital universitario brasileño. Los prototipos fueron separados en dos grupos (A y B). Para comparar los dos modelados de sostén, fue utilizado la Odds Ratio (OR) como una medida de intensidad de la asociación. En las percepciones subjetivas, se utilizaron la Escala de Borg Modificada y el test chi-cuadrado de independencia (χ2). Para comparar los dos prototipos, se realizó el test Z y análisis de regresión logística. Se consideró un nivel de significación de 5%. Resultados: el sostén del grupo B fue el más adecuado para ergonomía de conforto físico y psicoestético del que el del grupo A (p < 0,0001), segundo los testes de regresión logística. Conclusiones: el modelado B fue ergonómicamente adecuado, con criterios de usabilidad y evaluación centrada en las lactantes.

RESUMO Objetivos: analisar a ergonomia de duas modelagens de sutiãs para amamentação. Métodos: estudo descritivo realizado com 152 lactantes em um hospital universitário brasileiro. Os protótipos foram separados em dois grupos (A e B). Para comparar as duas modelagens de sutiãs, foi utilizado a Odds Ratio (OR) como uma medida de intensidade da associação. Nas percepções subjetivas, utilizaramse a Escala de Borg Modificada e o teste qui-quadrado de independência (χ2). Para comparar os dois protótipos, realizou-se o teste Z e análise de regressão logística. Considerou-se um nível de significância de 5%. Resultados: o sutiã do grupo B foi o mais adequado para ergonomia de conforto físico e psicoestético do que o do grupo A (p < 0,0001), segundo os testes de regressão logística. Conclusões: a modelagem B foi ergonomicamente adequada, com critérios de usabilidade e avaliação centrada nas lactantes.

Clinical Applications of Additive Manufacturing Models in Neurosurgery: a Systematic Review

Introduction Three-dimensional (3D) printing technologies provide a practical and anatomical way to reproduce precise tailored-made models of the patients and of the diseases. Those models can allow surgical planning, besides training and surgical simulation in the treatment of neurosurgical diseases. Objective The aim of the present article is to review the scenario of the development of different types of available 3D printing technologies, the processes involved in the creation of biomodels, and the application of those advances in the neurosurgical field. Methods We searched for papers that addressed the clinical application of 3D printing in neurosurgery on the PubMed, Ebsco, Web of Science, Scopus, and Science Direct databases. All papers related to the use of any additivemanufacturing technique were included in the present study. Results Studies involving 3D printing in neurosurgery are concentrated on threemain areas: (1) creation of anatomical tailored-made models for planning and training; (2) development of devices and materials for the treatment of neurosurgical diseases, and (3) biological implants for tissues engineering. Biomodels are extremely useful in several branches of neurosurgery, and their use in spinal, cerebrovascular, endovascular, neuro-oncological, neuropediatric, and functional surgeries can be highlighted. Conclusions Three-dimensional printing technologies are an exclusive way for direct replication of specific pathologies of the patient. It can identify the anatomical variation and provide a way for rapid construction of training models, allowing the medical resident and the experienced neurosurgeon to practice the surgical steps before the operation.

Three-Dimensional Hollow Elastic Models for Intracranial Aneurysm Clipping Election - A Case Study.

We describe a method for fabricating a three-dimensional hollow and elastic aneurysm model, which is useful for surgical clipping simulation. In this paper, we explain the generation of such hollow elastic model, based on 3D printing. Also, we report on the effects of applying it to presurgical clipping election and simulation. The advantages of this methodology are: (1) it generates a hollow and flexible 3D biomodel, represented as the vascular areas, apart from having together the skull, as a reference system; (2) it employs an inexpensive and easy to reproduce methodology; (3) it helps not only for training neurosurgeons, but also for planning and guiding the actual surgery clip's insertion.

Additive Manufacturing of 3D Biomodels as Adjuvant in Intracranial Aneurysm Clipping.

One of the main difficulties in intracranial aneurysms (IA) surgery refers to the choice of the appropriate clip(s) to be implanted. Although the imaging exams currently available ensure visualization of IA's morphology, they do not bring an accurate reference positioning for the surgeon in executing the surgery procedure nor efficiently contribute to planning the surgery. Unfortunately, for IA's largely inaccessible regions, there is not an efficient method of treatment planning. Therefore, we propose a novel method that allows the generation of a 3D biomodel of the IA region under investigation using additive manufacturing technology (AM). Thus, a physical copy of the IA is produced and offers the surgeon a full view of the anatomy of that region of the brain. The aim of this study is the creation of a flexible 3D physical model (elastomer) through the AM technique, in order to allow the clip selection prior to the surgery. DICOM angio-CT images from eight patients who underwent IA surgery were transformed into STL format and then built on a 3D printer. Preoperative surgical clip selection was performed and then compared with those used in surgery. At the end of the study, all 3D IA biomodels were reproduced for microsurgical clipping selection and it was possible to predict the metal clip to be used in the surgery. In addition, the proposed methodology helps to clarify the surgical anatomy and to avoid excessive manipulation of the intracranial arteries and prolonged surgical time. The major advantage of this technology is that the surgeon can closely study complex cerebrovascular anatomy from any perspective using realistic 3D biomodels, which can be handheld, allowing simulation of intraoperative situations and anticipation of surgical challenges.

Ludic-activities-based therapeutic suitcase for rehabilitation of people with stroke / Mala terapêutica baseada em atividades lúdicas para reabilitação de pessoas com AVC / Maleta terapéutica basada en actividades lúdicas para la rehabilitación de personas con accidente cerebrovascula

Abstract Introduction: The rehabilitation of people who suffered a stroke depends on patient commitment, rehabilitation strategies and technologies employed. Objective: To develop a suitcase with rehabilitation activities using devices that provide functional exercises in a fun and motivating way. Method: The main motor and sensory functions lost due to the stroke were identified and a set of three boards was modeled, providing activities with adequate structure and strategies to conduct rehabilitation exercises. A pilot experiment was performed with a subject with poststroke sequelae. Results: The suitcase has three boards containing devices for exercises of proprioception, motor coordination, grasping and reeducation to decrease agnosia, to increase muscle strength and for cognitive training. Conclusion: The suitcase fulfilled its functional reeducation purpose via a playful method; it provides improvements in the ability to fit parts, differentiate colors, recognize shapes and textures, and increase the strength.

Resumo Introdução: A reabilitação das pessoas que sofreram acidente vascular encefálico depende do empenho do paciente e das estratégias e tecnologias de reabilitação empregadas. Objetivo: Desenvolver uma maleta com atividades reabilitatórias por meio de dispositivos que proporcionem, de forma lúdica e motivadora, exercícios funcionais. Método: Identificou-se as principais funções motoras e sensoriais perdidas em decorrência do AVE e modelou-se pranchas de atividades contendo estrutura e estratégias adequadas à realização de exercícios reabilitatórios. Realizou-se um ensaio piloto com um indivíduo que sofreu AVE. Resultados: A maleta possui três pranchas envolvendo dispositivos para exercícios de propriocepção, coordenação motora, pinça fina e reeducação para diminuição da agnosia, para aumento de força muscular e para treino cognitivo. Conclusão: A maleta confeccionada cumpriu seu intuito de reeducação funcional pela ludicidade, proporcionando melhora na habilidade de encaixe de peças e diferenciação de cores bem como no aumento de força e no reconhecimento de formas e texturas.

Resumen Introducción: La rehabilitación de las personas que han sufrido accidente cerebrovascular, depende del empeño del paciente y de las estrategias y tecnologías empleadas. Objetivo: Desarrollar una maleta con actividades de rehabilitación a través de dispositivos que proporcionen, de forma lúdica y motivadora, ejercicios funcionales. Método: Se identificaron las principales funciones motoras y sensoriales perdidas como consecuencia del accidente cerebrovascular, y se modelaron tableros de actividades con contenido, estructura y estrategias adecuadas a la realización de ejercicios de rehabilitación. Se realizó una prueba piloto con un individuo típico. Resultados: La maleta tiene tres tableros que involucran dispositivos para la propiocepción, coordinación motora, pinza fina y reeducación para disminuirla agnosia, aumentar la fuerza muscular y el entrenamiento cognitivo. Conclusión: La maleta confeccionada, cumplió su propósito de reeducación funcional de una manera lúdica, mejorando la habilidad de encaje de piezas y diferenciación de colores, así como el aumento de fuerza y el reconocimiento de formas y texturas.

Evidências da mama puerperal por termografia: relato de caso / Evidencias de la mama puerperal por termografía: informe de caso / Evaluation of the puerperal breast through thermography: a case report

RESUMO Objetivo: analisar a temperatura da mama puerperal utilizando termografia por infravermelho. Método: estudo realizado no Banco de Leite Humano de um Hospital de Curitiba em 2011. Selecionou-se aleatoriamente uma lactante com ingurgitamento bilateral nos quadrantes externos das mamas, e inspecionou-se a temperatura. Resultados: encontrou-se um lobo mamário macio com assimetria térmica de 1,5ºC, comparado à região contralateral, mas não se identificou assimetria térmica na temperatura geral entre as mamas. Conclusão: este caso sugere que assimetria térmica na mama puerperal está relacionada ao volume de leite nos lobos e não a disfunções ou patologias nesses lobos. O estudo abre perspectivas para aprofundamento da compreensão da fisiologia lactacional com a ampliação do grupo amostral avaliado nesta pesquisa. A termografia é uma técnica adequada às lactantes, mas requer sala apropriada, tempo para aclimatação e conhecimento da anatomia mamária.

RESUMEN Objetivo: Analizar la temperatura de la mama puerperal utilizando termografía infrarroja. Método: Estudio realizado en Banco de Leche Humana de hospital de Curitiba en 2011. Se seleccionó aleatoriamente una lactante con ingurgitación bilateral en cuadrantes externos de las mamas, y se verificó la temperatura. Resultados: Se halló un lóbulo mamario blando con asimetría térmica de 1,5ºC comparado con la zona contralateral, no identificándose asimetría térmica en temperatura general entre mamas. Conclusión: Este caso sugiere que la asimetría térmica en la mama puerperal está relacionada con el volumen de leche en los lóbulos, y no con disfunciones o patologías en dichos lóbulos. El estudio ofrece perspectivas para profundizar la comprensión de la fisiología lactante, ampliando el grupo muestral evaluado en este estudio. La termografía es una técnica adecuada para las lactantes, aunque requiere de ámbito adecuado, tiempo de aclimatación y conocimiento de la anatomía mamaria.

ABSTRACT Objective: to analyze puerperal breast temperature using infrared thermography. Method: study performed at the Human Milk Bank of a Hospital in Curitiba, Brazil. A lactating mother with bilateral engorgement in the external breast quadrants was randomly selected and the temperature was measured. Results: A soft mammary lobe was found, with thermal asymmetry of 1.5ºC, compared to the contralateral region, however no thermal asymmetry was identified in the general temperature between the breasts. Conclusion: this case suggests that thermal asymmetry in the puerperal breast is related to the volume of milk in the lobes and not to dysfunctions or pathologies in these lobes. The study indicates possibilities for deepening the understanding of lactational physiology with the amplification of the sample group evaluated in this study. Thermography is a technique suitable for lactating mothers, however requires an appropriate room, time for acclimatization and knowledge of the mammary anatomy.

From the past to the future of therapeutic orthoses for upper limbs rehabilitation

Abstract Introduction The expansion of assistive technologies has been increasing significantly, involving almost all the daily activities, performed by disabled people. One of the highlights to be mentioned is the robotic orthoses, which are being used to amplify movements, to replace amputated limbs, and for a variety of rehabilitation therapies, among others. This study aims to present a review about upper limbs' orthoses, discussing their weaknesses, potentialities, and pointing out for future perspectives under the motor rehabilitation. Methods For this research, it had been identified 161 papers, based on the bibliographic bases from IEEE and Science Direct, which were filtered by the keywords orthoses, hand, upper-limbs and technology. After the appropriate exclusions, 22 papers were analyzed. Results This review indicates that most of the orthoses have been developed for rehabilitation therapies to be employed by people who have suffered stroke, cerebral palsy or spinal cord injury. This research summarized that the upper limbs movements are effectively produced by electric or pneumatic actuators, having a variety of degrees of freedom. Conclusion This review has shown that, although there are many orthoses styles, ranging from electric to pneumatic actuators; also there are some technical restrictions that prevent their use by most people. However, upper limb orthoses seem to be a great solution for the rehabilitation of people who have suffered a stroke.

Automatic respiratory phase detection for functional electrical stimulation synchronization

Abstract Introduction People with cervical or high thoracic spinal cord injury usually have respiratory muscle weakness. When transcutaneous functional electrical stimulation (TFES) synchronized with the patient's natural breathing is applied to respiratory muscles, their strength and resistance are increased. In this work, we propose a novel method to perform an automatic synchronization, composed of a signal acquisition system and an algorithm that recognizes both respiratory cycle phases during quiet breathing. Methods The respiratory signal acquisition unit consists of a load cell attached to an elastic belt. The algorithm is based on statistical evaluation and linear approximation for detecting the beginning of both inhalation and exhalation phases. Ten volunteers remained steady, breathing quietly for one minute for signal acquisition. Results The system's automatic detection of inspiratory events reached 87.5% of true positives, 6.7% of false negatives and 5.8% of false positives. Both hit and error ratios obtained in the detection of expiratory events reached 94.3% true positives, 4.9% false positives and 0.8% false negatives. Conclusion The developed algorithm can identify the respiratory phases properly and it can be used in future synchronized TFES applications whether the patient remains in a quasi-static position during treatment.

Power amplifier circuits for functional electrical stimulation systems

Abstract Introduction: Functional electrical stimulation (FES) is a technique that has been successfully employed in rehabilitation treatment to mitigate problems after spinal cord injury (SCI). One of the most relevant modules in a typical FES system is the power or output amplifier stage, which is responsible for the application of voltage or current pulses of proper intensity to the biological tissue, applied noninvasively via electrodes, placed on the skin surface or inside the muscular tissue, closer to the nervous fibers. The goals of this paper are to describe and discuss about the main power output designs usually employed in transcutaneous functional electrical stimulators as well as safety precautions taken to protect patients. Methods A systematic review investigated the circuits of papers published in IEEE Xplore and ScienceDirect databases from 2000 to 2016. The query terms were "((FES or Functional electric stimulator) and (circuit or design))" with 274 papers retrieved from IEEE Xplore and 29 from ScienceDirect. After the application of exclusion criteria the amount of papers decreased to 9 and 2 from IEEE Xplore and ScienceDirect, respectively. One paper was inserted in the results as a technological contribution to the field. Therefore, 12 papers presented power stage circuits suitable to stimulate great muscles. Discussion The retrieved results presented relevant circuits with different electronic strategies and circuit components. Some of them considered patient safety strategies or aimed to preserve muscle homeostasis such as biphasic current application, which prevents charge accumulation in stimulated tissues as well as circuits that dealt with electrical impedance variation to keep the electrode-tissue interface within an electrochemical safe regime. The investigation revealed a predominance of design strategies using operational amplifiers in power circuits, current outputs, and safety methods to reduce risks of electrical hazards and discomfort to the individual submitted to FES application.

Influence of subcutaneous fat on mechanomyographic signals at three levels of voluntary effort

Abstract Introduction This study aims to assess the influence of different skinfold thicknesses (ST) and their relation to the attenuation of the mechanomyographic (MMG) signal at different force levels (maximal voluntary contraction – MVC, 40% of MVC and 70% of MVC) of the rectus femoris muscle. Methods Fifteen volunteers were divided in two groups: ST lower than 10mm (G<10) (8 participants) and ST higher than 35mm (G>35) (7 participants). Student t tests were employed to investigate differences between G<10 and G>35 regarding MMG analysis parameters (acceleration root mean square – aRMS, zero crossing – ZC, and median frequency – MDF), for the X, Y and Z axes, as well as for the modulus of these three axes. Results We found that thicker layers of body fat act as attenuator filters for the MMG signal [MDFMVC: X (p = 0.005), Z (p = 0.003); MDF70%MVC: X (p = 0.034); ZCMVC: Z (p = 0.037), modulus (p = 0.005); ZC70%MVC: Z (p = 0.047)]. We found significant correlation between ST values and aRMS in three levels, in the Yaxis (p = 0.591), for the group G<10. For the modulus, the aRMS value showed correlation with ST values for group G>35 in 40%MVC (R2 = 0.610), and 70%MVC (R2 = 0.592). The MDF parameter showed correlation with ST values only in the Yaxis in 70%MVC (R2 = 0.700) for G>35. Conclusions We observed MMG signal attenuation in at least one of the parameters analyzed for each level of the rectus femoris muscle force, indicating that MMG signals are significantly attenuated with increasing thickness of the subcutaneous fat layer.

Artificial motor control for electrically stimulated upper limbs of plegic or paretic people

Introduction: Functional Electrical Stimulation (FES) is a technique used in the restoration and generation of movements performed by subjects with neuromuscular disorders such as spinal cord injury (SCI). The purpose of this article is to outline the state of the art and perspectives of the use of FES in artificial motor control of the upper limbs in paretic or plegic people. Methods The databases used in papers selection were Google Scholar and Capes’ Portals as well as proceedings of the Annual Conference of the International Functional Electrical Stimulation Society (IFESS). Results Approximately 85% of the reviewed studies showed FES profile with pulse duration ranging from 1 to 300 μs and modulating (burst) frequency between 10 and 40 Hz. Regarding the type of electrodes, 88% of the studies employed transcutaneous electrodes. Conclusion We concluded that FES with closed-loop feedback and feedforward are the most used and most viable systems for upper limbs motor control, because they perform self-corrections slowing neuromuscular adaptation, allowing different planes and more range of movement and sensory-motor integration. One of the difficulties found in neuroprosthesis systems are electrical wires attached to the user, becoming uninteresting in relation to aesthetics and break. The future perspectives lead to a trend to miniaturization of the stimulation equipment and the availability of wireless networks, which allow the attachment of modules to other components without physical contact, and will become more attractive for daily use.

Correlation between spectral and temporal mechanomyography features during functional electrical stimulation

Abstract Introduction: Signal analysis involves time and/or frequency domains, and correlations are described in the literature for voluntary contractions. However, there are few studies about those correlations using mechanomyography (MMG) response during functional electrical stimulation (FES) elicited contractions in spinal cord injured subjects. This study aimed to determine the correlation between spectral and temporal MMG features during FES application to healthy (HV) and spinal cord injured volunteers (SCIV). Methods: Twenty volunteers participated in the research divided in two groups: HV (N=10) and SCIV (N=10). The protocol consisted of four FES profiles transcutaneously applied to quadriceps femoris muscle via femoral nerve. Each application produced a sustained knee extension greater than 65º up to 2 min without adjusting FES intensity. The investigation involved the correlation between MMG signal root mean square (RMS) and mean frequency (MF). Results: HV and SCIV indicated that MMGRMS and MMGMF variations were inversely related with -0.12 ≥ r ≥ -0.82. The dispersion between MMGMF and MMGRMS reached 0.50 ≤ r2 ≤ 0.64. Conclusion The increase in MMGRMS and the decrease in MMGMF may be explained by the motor units coherence during fatigue state or by motor neuron adaptation (habituation) along FES application (without modification on parameters).

Anti-inflammatory effect of laser acupuncture in ST36 (Zusanli) acupoint in mouse paw edema.

Low-level laser therapy (LLLT) in acupuncture is a low-power laser applied to acupoints for providing luminous energy, capable to produce photobiological induction that results in biochemical, bioelectric, and bioenergetic effects. ST36 (Zusanli) is a point of acupuncture commonly used for treatment of several pathological alterations, such as inflammation, acute pain, and gastrointestinal disorders. In this study, we evaluated the anti-inflammatory effect of LLLT (830 nm, 4 J/cm(2)) in ST36 acupoint through the model of carrageenan-induced paw edema in mice and the possible mechanisms involved. Female Swiss mice were treated with LLLT in ST36 before the paw edema induction, which was measured by means of a digital micrometer and the temperature through a high-resolution digital thermograph. After this, the levels of reactive oxygen species (ROS), lipid hydroperoxides (LOOH), and reduced glutathione (GSH) were quantified. In another set of experiments, the paw edema was induced by bradykinin, histamine, and prostaglandin E2 (PGE2). LLLT in ST36 acupoint significantly inhibited the edema formation for 4 h after the carrageenan injection and reduced the paw temperature in 10 %. Furthermore, LLLT also reduced the levels of ROS (55 %) and LOOH (50 %) but, however, did not alter the GSH levels. LLLT in ST36 reduced the paw edema induced by bradykinin (30 min, 6 %, 60 min, 7 %), histamine (30 min, 11 %), and PGE2 (90 min, 10 %, 120 min, 16 %). In conclusion, these results prove that LLLT in ST36 acupoint produces a relevant anti-inflammatory effect, reducing edema, temperature, and free radicals levels in mice paw.

Breast evaluation during lactation using thermography and pressure algometry / Avaliação da mama na lactação por termografia e presença de dor

Objective:To obtain scientific evidence of alterations in puerperal breast based on clinical examinations and pain measurements using pressure algometry and thermography.Methods:This qualitative descriptive and experimental study examined six lactating women included in a Human Milk Bank. Using clinical examinations, pressure algometry, and thermography, data from puerperal mammary glands were collected. A descriptive analysis of the quantitative variables expressed as averages, minimal and maximal values, and standard deviations was conducted. Image analyses were performed using a ThermaCAM™ 2.9 (FLIR Systems, Inc.) software.Results:Flaccid mammary glands were the coldest, with an average temperature of 32.7°C (SD±0.32386°C), and more tolerant to pain, with an average of 1.87 kgf/m2 (SD ±0.29558 kgf/m2). The greater the degree of engorgement, the higher the temperature observed.Conclusion:The results indicate that it is possible to use clinical examinations, pressure algometry, and infrared thermography to delineate patterns between various events affecting the mammary glands during lactation.

Objetivo: Identificar evidências científicas das alterações na mama puerperal baseadas no exame clínico, na medição da dor por algometria de pressão e termografia. Métodos: Estudo descritivo, experimental, de abordagem qualiquantitativa, realizado com seis lactantes em um Banco de Leite Humano. Por meio de exame clínico, algometria de pressão e termografia, foram coletados dados das mamas em fase puerperal. Efetuou-se a análise descritiva das variáveis quantitativas expressas por médias, valores mínimos, máximos e desvios-padrão. Resultados: As mamas flácidas foram as mais frias com temperatura média de 32,7°C (DP±0,32386) e mais tolerantes à dor, com média de 1,87 kgf (DP±0,29558). Quanto maior a intensidade do ingurgitamento, maior foi a temperatura encontrada. A análise das imagens foram realizadas utilizando o software Therma CAM™ 2,9 (FLIR Systems, Inc). Conclusão: Os resultados indicam que, a partir do exame clínico, algometria de pressão e termografia infravermelha, foi possível delinear um padrão diferencial entre os vários eventos que acometem a mama no processo da lactação.

Advances and perspectives of mechanomyography

INTRODUCTION: The evaluation of muscular tissue condition can be accomplished with mechanomyography (MMG), a technique that registers intramuscular mechanical waves produced during a fiber's contraction and stretching that are sensed or interfaced on the skin surface. OBJECTIVE: Considering the scope of MMG measurements and recent advances involving the technique, the goal of this paper is to discuss mechanomyography updates and discuss its applications and potential future applications. METHODS: Forty-three MMG studies were published between the years of 1987 and 2013. RESULTS: MMG sensors are developed with different technologies such as condenser microphones, accelerometers, laser-based instruments, etc. Experimental protocols that are described in scientific publications typically investigated the condition of the vastus lateralis muscle and used sensors built with accelerometers, third and fourth order Butterworth filters, 5-100Hz frequency bandpass, signal analysis using Root Mean Square (RMS) (temporal), Median Frequency (MDF) and Mean Power Frequency (MPF) (spectral) features, with epochs of 1 s. CONCLUSION: Mechanomyographic responses obtained in isometric contractions differ from those observed during dynamic contractions in both passive and functional electrical stimulation evoked movements. In the near future, MMG features applied to biofeedback closed-loop systems will help people with disabilities, such as spinal cord injury or limb amputation because they may improve both neural and myoelectric prosthetic control. Muscular tissue assessment is a new application area enabled by MMG; it can be useful in evaluating the muscular tonus in anesthetic blockade or in pathologies such as myotonic dystrophy, chronic obstructive pulmonary disease, and disorders including dysphagia, myalgia and spastic hypertonia. New research becomes necessary to improve the efficiency of MMG systems and increase their application in rehabilitation, clinical and other health areas.

Iontophoresis: principles and applications / Iontoforese: princípios e aplicações

Introduction Iontophoresis is a noninvasive technique used to increase transdermal penetration of substances through the skin layer (epidermis, dermis and hypodermis) in a controlled manner. Technological advance in recent decades have provided reduced cost of equipment needed for implementation, which allowed for the expansion of this technique. Objective The aim of this paper is to present the state of the art on iontophoresis, ranging from the atomic characteristics of the ion formation to the current applications of the technique. Methods Were researched papers from databases: IOP publishing, ScienceDirect, Pubmed, Springer, IEEE Xplore, Google Scholar and books with keywords iontophoresis, ions, topical applications between 1967 and 2010. Results Were selected (number of papers and database) 1 IOP Publishing, 1 from ScienceDirect, Central, 1 from Springer, 2 from PubMed, 11 from IEEE Xplore, 35 from Google Scholar, and 15 books, totaling 66 references and websites with nationally marketed electrotherapy products. Conclusion Iontophoresis is suitable for applications such as acetic acid (calcific tendinitis and myositis ossificans), calcium chloride and magnesium sulfate (control of musculoskeletal spasms), dexamethasone (inflammation), lidocaine (inflammation of soft tissues), zinc oxide (rheumatoid arthritis). It is also used in cosmetic applications with devices attached to the skin and for eye treatment aimed at specific tissues of the eye, providing a treatment option for various eye diseases, reducing the complications secondary to traditional methods of treatment. The advantages are the significant increase in the release and control of therapeutic agents, including drugs with high molecular weight. The disadvantages of iontophoresis are the complexity of the drug release system and prolonged exposure of the skin to an electrical current. .

Introdução A iontoforese é uma técnica não invasiva utilizada para aumentar, de forma controlada, a penetração transdermal de substâncias através das camadas da pele (epiderme, derme e hipoderme). O avanço tecnológico nas últimas décadas proporcionou uma redução no custo dos equipamentos necessários à sua aplicação, o que possibilitou a expansão dessa técnica. Objetivo Apresentar o estado da arte sobre iontoforese, abrangendo desde as características atômicas da formação do íon até as atuais aplicações da técnica. Métodos Foram pesquisados artigos das bases de pesquisa: IOP publishing, ScienceDirect, Pubmed, Springer, IEEE Xplore, Google Scholar e livros com os unitermos: iontophoresis, ions, topical applications entre os anos de 1967 e 2010. Resultados Foram selecionados (número de artigos e base de pesquisa) 1 da IOP Publishing, 1 da ScienceDirect, 1 da Springer, 2 da PubMed, 11 da IEEE Xplore, 35 do Google Scholar e 15 livros, totalizando 66 referências, além de websites com produtos comerciais nacionais de eletroterapia. Conclusão A iontoforese é indicada para aplicações como de ácido acético (tendinite calcificante e miosite ossificante), cloreto de cálcio e sulfato de magnésio (controle de espasmos musculoesqueléticos), dexametasona (inflamação), lidocaína (inflamação de tecidos moles), óxido de zinco (artrite reumatóide). Também é utilizada em aplicações cosméticas com dispositivos aderidos à pele e em tratamento ocular visando tecidos específicos do olho, oferecendo uma forma de tratamento para diversas doenças oculares, diminuindo as complicações apresentadas em métodos clássicos de tratamento. As vantagens ...

Assessment of techniques of massage and pumping in the treatment of breast engorgement by thermography / Avaliação das técnicas de massagem e ordenha no tratamento do ingurgitamento mamário por termografia / Evaluación de las técnicas de masaje y bombeo en el tratamiento de la congestión mamaria por termografía

OBJECTIVE: to evaluate techniques of massage and pumping in the treatment of postpartum breast engorgement through thermography. METHOD: the study was conducted in the Human Milk Bank of a hospital in Curitiba, Brazil. We randomly selected 16 lactating women with engorgement with the classification lobar, ampullary and glandular, moderate and intense. We compared the differential patterns of temperature, before and after the treatment by means of massage and pumping. RESULTS: we found a negative gradient of 0.3°C of temperature between the pre- and post-treatment in the experimental group. Breasts with intense engorgement were 0.7°C warmer when compared with moderate engorgement. CONCLUSION: massage and electromechanical pumping were superior to manual methods when evaluated by thermography. REBEC: U1111-1136-9027. .

OBJETIVO: avaliar técnicas de massagem e ordenha no tratamento do ingurgitamento mamário puerperal, por meio da termografia. MÉTODO: a pesquisa foi realizada no Banco de Leite Humano de um hospital de Curitiba, Brasil. Selecionaram-se, aleatoriamente, 16 lactantes com ingurgitamento com classificação lobar, ampolar e glandular moderado e intenso. Compararam-se os padrões diferenciais de temperatura, antes e após o tratamento realizado, por meio de massagem e ordenha. RESULTADOS: constatou-se um gradiente negativo de 0,3ºC de temperatura entre o pré e o pós-tratamento no grupo experimental. Mamas com ingurgitamento intenso foram 0,7ºC mais quentes quando comparadas com ingurgitamento moderado. CONCLUSÃO: a massagem e ordenha eletromecânicas são superiores às manuais, quando avaliadas por termografia. REBEC: U1111-1136-9027. .

OBJETIVO: evaluar los métodos de masaje y bombeo en el tratamiento de la congestión mamaria posparto a través de la termografía. MÉTODO: el estudio se realizó en el Banco de Leche Humana de un hospital en Curitiba, Brasil. Se seleccionaron al azar 16 mujeres en periodo de lactancia con congestión con clasificación lobar, ampular y glandular, moderada e intensa. Se compararon los patrones diferenciales de temperatura, antes y después del tratamiento por medio de masaje y bombeo. RESULTADOS: se encontró un degradado negativo de 0,3°C de temperatura entre el pre y post-tratamiento en el grupo experimental. Las mamas con intensa congestión eran 0,7°C más caliente en comparación a aquellos con congestión moderada. CONCLUSIÓN: el masaje y el bombeo electromecánico fueron superiores a los métodos manuales cuando se evaluaron por termografía. REBEC: U1111-1136-9027. .

Electrophysiologic characteristics of tremor in Parkinson?s disease and essential tremor / Características eletrofisiológicas do tremor na Doença de Parkinson e tremor essencial

Tremor in essential tremor (ET) and Parkinson’s disease (PD) usually present specific electrophysiologic profiles, however amplitude and frequency may have wide variations. Objective: To present the electrophysiologic findings in PD and ET. Method: Patients were assessed at rest, with posture and action. Seventeen patients with ET and 62 with PD were included. PD cases were clustered into three groups: predominant rest tremor; tremor with similar intensity at rest, posture and during kinetic task; and predominant kinetic tremor. Results: Patients with PD presented tremors with average frequency of 5.29±1.18 Hz at rest, 5.79±1.39 Hz with posture and 6.48±1.34 Hz with the kinetic task. Tremor in ET presented with an average frequency of 5.97±1.1 Hz at rest, 6.18±1 Hz with posture and 6.53±1.2 Hz with kinetic task. Seven (41.2%) also showed rest tremor. Conclusion: The tremor analysis alone using the methodology described here, is not sufficient to differentiate tremor in ET and PD. .

Os tremores observados no tremor essencial (TE) e na doença de Parkinson (DP) costumam apresentar perfis eletrofisiológicos específicos, embora amplitude e frequência possam ter grandes variações. Objetivo: Apresentar os resultados dos exames eletrofisiológicos na DP e no TE. Método: Pacientes foram avaliados em repouso, com postura e em ação. Foram incluídos 17 pacientes com TE e 62 com DP. Casos de DP foram divididos em três grupos: predomínio de tremor de repouso; tremor com intensidade semelhante em repouso, postura e tarefa cinética e tremor cinético predominante. Resultados: Pacientes com DP apresentaram tremores com frequência média de 5,29±1,18 Hz em repouso, 5,79±1.39 Hz com postura e 6,48±1,34 Hz com tarefa cinética. Tremor no TE apresentou frequência média 5,97±1,1Hz em repouso, 6,18±1Hz com postura e 6,53±1,2 Hz com tarefa cinética. Sete (41,2%) também apresentaram tremor de repouso. Conclusão: A análise do tremor per se, usando os métodos descritos neste estudo, não é suficiente para diferenciar o tremor no TE e DP. .