RESUMO
Gold nanoparticles were supported by a phloroglucinolcarboxylic acid-formaldehyde (PF) gel, a new organic gel with a 30 nm spheroid-like structure. The surface area of the PF gel with gold nanoparticles was 550 m(2)/g. Gold nanoparticles supported on a PF gel exhibited catalytic activity in the reduction of 4-nitrophenol with a reaction rate constant of 7.4 x 10(-3) s(-1), which is high in the reported heterogeneous reaction system. The adsorption behavior of 4-nitrophenol into the gel support was observed by ultraviolet-visible absorption spectroscopy. Gold nanoparticles in the PF network were characterized by scanning electron microscopy, atomic force microscopy, and transmission electron microscopy observation. The high reduction rate would be attributed to the extraction and diffusion of the reactant through the pores of a PF gel support to encounter the highly dispersed gold nanoparticles on the surface and inside the material.
Assuntos
Ácidos Carboxílicos/química , Formaldeído/química , Ouro/química , Nanopartículas Metálicas/química , Floroglucinol/química , Polímeros/química , Catálise , Coloides/química , Géis , Cinética , Microscopia Eletrônica de Varredura/métodos , Microscopia Eletrônica de Transmissão/métodos , Modelos Químicos , Compostos Orgânicos/química , Raios UltravioletaRESUMO
Low-density tin dioxide (SnO2) is required for radiating monochromatic extreme ultraviolet (EUV) light with low debris and high conversion efficiency from a laser. In this paper, tin dioxide nanoparticle hollow microcapsules were successfully fabricated by a layer-by-layer template technique. The obtained capsules have a rougher surface (30 nm in rms) compared to the freshly prepared polyelectrolyte capsules. Based on the X-ray diffraction (XRD) results, the tin dioxide nanoparticles well maintained their size after they were assembled on the capsules' surfaces. In order to remove the polymer template, a heat treatment was introduced, and after the heat treatment the capsule sizes shrank about 71% (the average size was from 4.9 to 3.5 mum), and the obtained capsules maintained their round shape after water evaporation. The narrowest bandwidth at the 13.5 nm emission in the EUV region was observed when the capsules were irradiated by a CO2 laser with an intensity of 2.9 x 10(10) W/cm (2).
Assuntos
Dióxido de Carbono/química , Compostos de Estanho/química , Estanho/química , Adsorção , Eletrólitos , Temperatura Alta , Lasers , Microscopia de Força Atômica , Microscopia Eletrônica de Varredura , Microesferas , Modelos Estatísticos , Nanopartículas/química , Propriedades de Superfície , Raios Ultravioleta , Difração de Raios XRESUMO
Opacity effects on extreme ultraviolet (EUV) emission from laser-produced tin (Sn) plasma have been experimentally investigated. An absorption spectrum of a uniform Sn plasma generated by thermal x rays has been measured in the EUV range (9-19 nm wavelength) for the first time. Experimental results indicate that control of the optical depth of the laser-produced Sn plasma is essential for obtaining high conversion to 13.5 nm-wavelength EUV radiation; 1.8% of the conversion efficiency was attained with the use of 2.2 ns laser pulses.
RESUMO
A scheme to suppress the Rayleigh-Taylor instability has been investigated for a direct-drive inertial fusion target. In a high-Z doped-plastic target, two ablation surfaces are formed separately-one driven by thermal radiation and the other driven by electron conduction. The growth of the Rayleigh-Taylor instability is significantly suppressed on the radiation-driven ablation surface inside the target due to the large ablation velocity and long density scale length. A significant reduction of the growth rate was observed in simulations and experiments using a brominated plastic target. A new direct-drive pellet was designed using this scheme.