Formulation of Antioxidant Gummies Based on Gelatin Enriched with Citrus Fruit Peels Extract.

In this work, the peels of red and blonde oranges as well as lemons were efficiently (5.75-9.65% yield) extracted by hydroalcoholic solution with ultrasound assistance and employed as active molecule sources in the preparation of functional gummies. Antioxidant performances of the hydroalcoholic extracts were characterized by colorimetric assays, whereas LC-HRMS analyses identified the main bioactive compounds (phenolic acids and flavonoids). The highest scavenging activity was recorded for lemon extract in an aqueous environment (IC50 = 0.081 mg mL-1). An ecofriendly grafting procedure was performed to anchor polyphenols to gelatin chains, providing macromolecular systems characterized by thermal analysis and antioxidant properties. Scavenger abilities (IC50 = 0.201-0.454 mg mL-1) allowed the employment of the conjugates as functional ingredients in the preparation of gummies with remarkable antioxidant and rheological properties over time (14 days). These findings confirmed the possible employment of highly polluting wastes as valuable sources of bioactive compounds for functional gummies preparation.

New Trends in Biosurfactants: From Renewable Origin to Green Enhanced Oil Recovery Applications.

Enhanced oil recovery (EOR) processes are technologies used in the oil and gas industry to maximize the extraction of residual oil from reservoirs after primary and secondary recovery methods have been carried out. The injection into the reservoir of surface-active substances capable of reducing the surface tension between oil and the rock surface should favor its extraction with significant economic repercussions. However, the most commonly used surfactants in EOR are derived from petroleum, and their use can have negative environmental impacts, such as toxicity and persistence in the environment. Biosurfactants on the other hand, are derived from renewable resources and are biodegradable, making them potentially more sustainable and environmentally friendly. The present review intends to offer an updated overview of the most significant results available in scientific literature on the potential application of biosurfactants in the context of EOR processes. Aspects such as production strategies, techniques for characterizing the mechanisms of action and the pros and cons of the application of biosurfactants as a principal method for EOR will be illustrated and discussed in detail. Optimized concepts such as the HLD in biosurfactant choice and design for EOR are also discussed. The scientific findings that are illustrated and reviewed in this paper show why general emphasis needs to be placed on the development and adoption of biosurfactants in EOR as a substantial contribution to a more sustainable and environmentally friendly oil and gas industry.

Curcumin-Sodium Alginate and Curcumin-Chitosan Conjugates as Drug Delivery Systems: An Interesting Rheological Behaviour.

The conjugation of polyphenols is a valuable strategy with which to confer tailored properties to polymeric materials of biomedical interest. Within this investigation, we aim to explore the possibility to use this synthetic approach to increase the viscosity of conjugates, thus allowing the release of a loaded therapeutic to be better controlled over time than in neat polyphenols. Curcumin (CUR) was conjugated to sodium alginate (CA) and chitosan (CS) with functionalisation degrees of 9.2 (SA-CUR) and 15.4 (CS-CUR) mg g-1. Calorimetric analyses showed higher degrees of chain rigidity upon conjugation, with a shift of the degradation peaks to higher temperatures (from 239 to 245 °C and from 296 to 303 °C for SA-CUR and CS-CUR, respectively). Rheological analyses were used to prove the enhanced interconnection between the polymer chains in the conjugates, confirmed by the weak gel parameters, A and z. Moreover, the typical non-Newtonian behaviour of the high-molecular-weight polysaccharides was recorded, together with an enhancement of the activation energy, Ea, in CS-CUR vs. CS (opposite behaviour recorded for SA-CUR vs. SA). The evaluation of the delivery performance (of Doxorubicin as a model drug) showed sustained release profiles, opening opportunities for the development of controlled delivery systems.

A Tara Gum/Olive Mill Wastewaters Phytochemicals Conjugate as a New Ingredient for the Formulation of an Antioxidant-Enriched Pudding.

Olive mill wastewater, a high polyphenols agro-food by-product, was successfully exploited in an eco-friendly radical process to synthesize an antioxidant macromolecule, usefully engaged as a functional ingredient to prepare functional puddings. The chemical composition of lyophilized olive mill wastewaters (LOMW) was investigated by HPLC-MS/MS and 1H-NMR analyses, while antioxidant profile was in vitro evaluated by colorimetric assays. Oleuropein aglycone (5.8 µg mL-1) appeared as the main compound, although relevant amounts of an isomer of the 3-hydroxytyrosol glucoside (4.3 µg mL-1) and quinic acid (4.1 µg mL-1) were also detected. LOMW was able to greatly inhibit ABTS radical (IC50 equal to 0.019 mg mL-1), displaying, in the aqueous medium, an increase in its scavenger properties by almost one order of magnitude compared to the organic one. LOMW reactive species and tara gum chains were involved in an eco-friendly grafting reaction to synthesize a polymeric conjugate that was characterized by spectroscopic, calorimetric and toxicity studies. In vitro acute oral toxicity was tested against 3T3 fibroblasts and Caco-2 cells, confirming that the polymers do not have any effect on cell viability at the dietary use concentrations. Antioxidant properties of the polymeric conjugate were also evaluated, suggesting its employment as a thickening agent, in the preparation of pear puree-based pudding. High performance of consistency and relevant antioxidants features over time (28 days) were detected in the milk-based foodstuff, in comparison with its non-functional counterparts, confirming LOWM as an attractive source to achieve high performing functional foods.

Preliminary Study on New Alternative Binders through Re-Refined Engine Oil Bottoms (REOBs) and Industrial By-Product Additives.

Recent studies have worked towards addressing environmental issues such as global warming and greenhouse gas emissions due to the increasing awareness of the depletion of natural resources. The asphalt industry is seeking to implement measures to reduce its carbon footprint and to promote sustainable operations. The reuse of several wastes and by-products is an example of a more eco-friendly activity that fulfils the circular economy principle. Among all possible solutions, the road pavement sector encourages, on one hand, the use of recycled materials as a partial replacement of the virgin lithic skeleton; on the other hand, it promotes the use of recycled materials to substituting for a portion of the petroleum bituminous binder. This study aims to use Re-refined Engine Oil Bottoms (REOBs) as a main substitute and additives from various industrial by-products as a full replacement for virgin bitumen, producing high-performing alternative binders. The REOBs have been improved by utilizing additives in an attempt to improve their specific properties and thus to bridge the gap between REOBs and traditional bituminous binders. An even larger amount of virgin and non-renewable resources can be saved using these new potential alternative binders together with the RAP aggregates. Thus, the reduction in the use of virgin materials is applied at the binder and the asphalt mixture levels. Rheological, spectroscopic, thermogravimetric, and mechanical analysis were used to characterize the properties, composition, and characteristics of the REOBs, REOB-modified binders, and asphalt mixes. Thanks to the rheological investigations of possible alternative binders, 18 blends were selected, since they behaved like an SBS-modified bitumen, and then they were used for producing the corresponding asphalt mixtures. The preliminary mechanical analysis of the asphalt mixtures shows that six mixes have promising responses in terms of stiffness, tensile resistance, and water susceptibility. Nevertheless, the high variability of recycled materials and by-products has to be taken into consideration during the definition of alternative binders and recycled asphalt mixtures. In fact, this study highlights the crucial effects of the chemical composition of the constituents and their compatibility on the behaviour of the final product. This preliminary study represents a first attempt to define alternative binders, which can be used in combination with recycled aggregates for producing more sustainable road materials. However, further analysis is necessary in order to assess the durability and the ageing tendency of the materials.

Formulation of New Baking (+)-Catechin Based Leavening Agents: Effects on Rheology, Sensory and Antioxidant Features during Muffin Preparation.

The aim of this investigation was to prepare two solid mixtures containing a soluble polymorph of (+)-catechin and mucic (MUC) or tartaric (TAR) acids as new leavening agents. The solid mixtures were based on a polymorph of (+)-catechin, characterized through Powder X-ray Diffraction (PXRD) analysis and assayed in in vitro antioxidant and solubility assays. The dough samples were studied by dynamic rheological tests, while muffins were studied through Headspace Solid-Phase Microextraction (HS-SPME)/ Gas Chromatography-Mass Spectrometry (GC-MS) analysis to identify volatile compounds, in vitro tests to evaluate antioxidant properties, and sensory analyses. TAR powder showed a solubility in water almost one order of magnitude increased with respect to commercial (+)-catechin (40.0 against 4.6 mg mL-1) and increased antioxidant performances. In particular, TAR showed total phenolic content (TPC) and total antioxidant capacity (TAC) values of 0.0298 ± 0.021 and 0.0081 ± 0.0009 meq CT/g, while MUC showed better results in terms of 2,2-diphenyl-1-picrylhydrazyl) acid (DPPH) and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid (ABTS), 0.518 ± 0.015 and 0.112 ± 0.010mg/mL, respectively. MS analysis identified different compounds derived from the lipid oxidation process. Muffins obtained using both powders showed interesting outcomes regarding dough process and appreciable appearance/olfactory/taste/texture profiles. Muffins obtained from TAR-based mixture showed also a total phenolic content of 0.00175 meq CT/g muffin, and almost two times improved TAC and scavenger activity against DPPH radical. The formulated powders could be used as suitable health-promoting ingredients in the food industry.

Spontaneous temperature-sensitive Pluronic(®) based niosomes: Triggered drug release using mild hyperthermia.

Inclusion of lipids or polymers with a transition temperature closer to physiological body temperature (40-42°C) is a strategy used in tumor therapy for more than 30 years, because it allows induction of drug release from delivery systems by mild hyperthermia. Unfortunately, most of these thermo-sensitive carriers are removed from circulation before completion of their function. Thus, novel multi-functional niosomes possessing spontaneous stealth and thermo-sensitive properties were developed from L64 Pluronic(®) and L64ox as its derivative, in presence or absence of cholesterol. The use of L64 both as amphiphilic constituent and thermo-sensitive molecule, gave the possibility to bypass the use of additional excipients and increased the system biocompatibility. Niosomes diameter ranged from 400 to 750nm and were long term stable. Calcein and 5-FU possess great affinity to niosomal matrices rich in PEO groups. Negative Z-potential values were attributed to the negative charges onto the niosomes surface and generally change according to the temperature. The in vitro drugs release studies were performed at 25°C, 37°C and 42°C, that are representative of certain conditions (storage, physiological condition and mild hyperthermia, respectively). Results showed that L64-based niosomes possess spontaneous thermo-sensitive properties: drugs releases were found to be more pronounced at 42°C. These early results are a promising first step for the development of multi-functional devices that combine several advantages such as stealth properties and temperature controllability at the desired location and time, for a more specific and efficient pharmacological therapy.