Amino groups modified SBA-15 for dispersive-solid phase extraction in the analysis of micropollutants by QuEchERS approach.

In the analysis of contaminants in food products, sample preparation is performed by proper adsorbents, whose choice is crucial to eliminate matrix interference. In this work we modified SBA-15 adsorbents by functionalization with (3-aminopropyl)-triethoxysilane (SBA-15-APTES) and N-[3-(trimethoxysilyl)propyl]aniline (SBA-15-AN) aiming to use them for the first time in the clean-up step of a QuEChERS (quick, easy, cheap, effective, rugged and safe) extraction of micropollutants from strawberry, a sugar rich fruit. After physico-chemical characterization by nitrogen adsorption, infrared spectroscopy and thermogravimetric analysis, the adsorption capabilities of SBA-15 sorbents and possible interaction mechanisms were studied at different pH (2.1-8.5) for glucose, sucrose and fructose at concentrations characteristic of those found in strawberries. The performance of the two SBA-15 sorbents was compared with that of commercial PSA (primary secondary amine), usually proposed in QuEChERS protocols. Both SBA-15 materials exhibit up to 30% higher adsorption than PSA, suggesting their possible QuEChERS application. Synthesized SBA-15 adsorbents were hence used as innovative dispersive sorbents in the QuEChERS extractions of 13 PAHs and 14 PCBs from strawberry. For PCBs, SBA-15-AN provides better matrix removal than PSA and comparable extraction recoveries around 90%. For PAHs, the use of SBA-15-AN has the advantage of lower relative standard deviation (7%) than PSA (19%).

Fe-Doped Sol-Gel Glasses and Glass-Ceramics for Magnetic Hyperthermia.

This work deals with the synthesis and characterization of novel Fe-containing sol-gel materials obtained by modifying the composition of a binary SiO2-CaO parent glass with the addition of Fe2O3. The effect of different processing conditions (calcination in air vs. argon flowing) on the formation of magnetic crystalline phases was investigated. The produced materials were analyzed from thermal (hot-stage microscopy, differential thermal analysis, and differential thermal calorimetry) and microstructural (X-ray diffraction) viewpoints to assess both the behavior upon heating and the development of crystalline phases. N2 adsorption-desorption measurements allowed determining that these materials have high surface area (40-120 m²/g) and mesoporous texture with mesopore size in the range of 18 to 30 nm. It was assessed that the magnetic properties can actually be tailored by controlling the Fe content and the environmental conditions (oxidant vs. inert atmosphere) during calcination. The glasses and glass-ceramics developed in this work show promise for applications in bone tissue healing which require the use of biocompatible magnetic implants able to elicit therapeutic actions, such as hyperthermia for bone cancer treatment.

Functionalized iron oxide/SBA-15 sorbent: investigation of adsorption performance towards glyphosate herbicide.

Glyphosate is a worldwide-used herbicide occurring in many monitoring campaigns. Efficient technologies are currently unavailable for glyphosate removal from waters. In this work, a SBA-15 mesoporous silica-based material (Fe-NH2-SBA-15) was synthesized and studied for the adsorption of glyphosate from waters. In order to promote specific interactions between the sorbent and glyphosate via phosphoric group, iron oxide nanoparticles were encapsulated and a surface functionalization with (3-aminopropyl)triethoxysilane was accomplished. The adsorption of glyphosate on Fe-NH2-SBA-15 was investigated as a function of (i) pH, (ii) ionic strength (I), and (iii) adsorbate to adsorbent ratio (C), using a two-level, three-factor experimental design. The experimental design allowed for understanding the effect of the abovementioned variables and for proposing experimental conditions for quantitative removal (pH = 2.1, I = 1⋅10-2 M and C = 0.35) under both batch and dynamic conditions. Interaction mechanism between glyphosate and Fe-NH2-SBA-15 sorbent was elucidated by studying the adsorption behavior of sorbents derived from the intermediate stages of synthesis and by desorption tests. Fe-NH2-SBA-15 sorbent can be quantitatively regenerated by 12.5 mM NaOH, and can be reused at least for five adsorption/desorption cycles. Quantitative removal of glyphosate from inlet and effluent wastewaters from a wastewater treatment plant is shown.

Genotoxicity of amorphous silica particles with different structure and dimension in human and murine cell lines.

Although amorphous silica is used in food products, cosmetics and paints and as vector for drug delivery, data on its potential health hazard are limited. The aim of this study was to investigate the cytotoxic and genotoxic potential of silica particles of different sizes (250 and 500nm) and structures (dense and mesoporous). Dense silica (DS) spheres were prepared by sol-gel synthesis, mesoporous silica particles (MCM-41) were prepared using hexadecyltrimethyl ammonium bromide as a structure-directing agent and tetraethylorthosilicate as silica source. Particles were accurately characterised by dynamic light scattering, nitrogen adsorption, X-ray diffraction and field emission scanning electron microscopy. Murine macrophages (RAW264.7) and human epithelial lung (A549) cell lines were selected for investigation. Genotoxicity was evaluated by Comet assay and micronucleus test. Cytotoxicity was tested by the trypan blue method. Cells were treated with 0, 5, 10, 20, 40 and 80 µg/cm(2) of different silica powders for 4 and 24 h. The intracellular localisation of silica was investigated by transmission electron microscopy. Amorphous particles penetrated into the cells, being compartmentalised within endocytic vacuoles. DS and MCM-41 particles induced cytotoxic and genotoxic effects in A549 and RAW264.7 although to different extent in the two cell lines. A549 were resistant in terms of cell viability, but showed a generalised induction of DNA strand breaks. RAW264.7 were susceptible to amorphous silica exposure, exhibiting both cytotoxic and genotoxic responses as DNA strand breaks and chromosomal alterations. The cytotoxic response of RAW264.7 was particularly relevant after MCM-41 exposure. The genotoxicity of amorphous silica highlights the need for a proper assessment of its potential hazard for human health.

Mesoporous bioactive glass as a multifunctional system for bone regeneration and controlled drug release.

PURPOSE: Coupling the potential for bone regeneration and the ability for in situ controlled drug release in a single device is a challenging field of research in bone tissue engineering; in an attempt to pursue this aim, mesoporous bioactive glass (MBG) membranes belonging to the SiO2-P2O5-CaO ternary system were produced and characterized. METHODS: The glass was synthesized via a sol-gel route coupled with an evaporation-induced self-assembly process by using a non-ionic block co-polymer as a mesostructure former. MBG structure and morphology, as well as mesopores size and shape, were investigated by x-ray diffraction, transmission electron microscopy, and N2 adsorption-desorption measurements. In vitro bioactivity was investigated by soaking MBG membranes in simulated body fluid (SBF) for different time frames. Ibuprofen was encapsulated into MBG pores and drug release kinetics in SBF were assessed. Biological tests by using SAOS-2 cells were performed to assess the material cytocompatibility. RESULTS: The material revealed significant ability to induce hydroxyapatite formation on its surface (bioactivity). Drug release kinetics in SBF are very similar to those obtained for mesoporous silica having mesopore size comparable to that of the prepared MBG (∼5 nm). No evidence of cell viability depression was detected during in vitro culture, which demonstrates the good biological compatibility of the material. CONCLUSIONS: The easiness of tailoring and shaping, the highly bioactive and biocompatible behavior, and the drug uptake/release ability of the prepared materials may suggest their use as "smart" multifunctional grafts for bone reconstructive surgery.

Cell-induced intracellular controlled release of membrane impermeable cysteine from a mesoporous silica nanoparticle-based drug delivery system.

A mesoporous silica nanoparticle-based intracellular cysteine delivery system that could be induced and regulated by cell-produced natural antioxidants was synthesized.

Mesoporous benzene-silica hybrid materials with a different degree of order in the wall structure: an IR comparative study.

Recent joint IR and computational work (Onida et al. J. Phys. Chem B 2005) has allowed a detailed characterization of the isolated silanols at the surface of highly ordered benzene-silica hybrid material. In the present paper, a similar characterization is provided for a less ordered sample. The comparison permits the assignment of IR features to the interaction of silanols either with one another or with benzene rings of the structure. The extent of structural imperfections appears to be limited, for example, no more than pairs of interacting silanols are found, readily healed by thermal treatment. Evidence is also provided that probe molecules with simultaneous H-acceptor and H-donor properties (benzene, methylacetylene) may interact with both the acidic proton in silanols and the electronic cloud in the framework aromatic rings.

The surface of ordered mesoporous benzene-silica hybrid material: an infrared and ab initio molecular modeling study.

Joint IR and computational results allow a detailed characterization of the surface properties of a mesoporous benzene-silica hybrid material with crystal-like wall structure. After outgassing at 450 degrees C, hydroxyl species mainly consist of noninteracting silanols, with both O-H and Si-O stretching modes at lower frequencies than those of SiOH in silica. Interaction with several probe molecules, followed both by experiment and calculus, shows that the aryl group in the coordination sphere of Si imparts a lesser acidity with respect to the isolated silanol in silica. In contrast, adsorption isotherms indicate that the interaction with acetone is stronger with benzene-silica than with silica: this is interpreted in terms of secondary interactions taking place between the slightly acidic CH in acetone and the electronic cloud in benzene-like rings. This suggests that both the inorganic component and the organic one play a role in dictating the surface behavior.