Radiographic and clinical outcomes of robot-assisted pedicle screw instrumentation for adolescent idiopathic scoliosis.

Introduction: Pedicle screw instrumentation (PSI) serves as the widely accepted surgical treatment for adolescent idiopathic scoliosis (AIS). The accuracy of screw positioning has remarkably improved with robotic assistance. Nonetheless, its impact on radiographic and clinical outcomes remains unexplored. This study aimed to investigate the radiographic and clinical outcomes of robot-assisted PSI vs. conventional freehand method in AIS patients. Methods: Data of AIS patients who underwent PSI with all pedicle screws between April 2013 and March 2022 were included and retrospectively analyzed; those with hybrid implants were excluded. Recruited individuals were divided into the Robot-assisted or Freehand group according to the technique used. Radiographic parameters and clinical outcome measures were documented. Results: In total, 50 patients (19, Freehand group; 31, Robot-assisted group) were eligible, with an average age and follow-up period of 17.6 years and 60.2 months, respectively, and female predominance (40/50, 80.0%). The correction rates of Cobb's angles for both groups were significant postoperatively. Compared to freehand, the robot-assisted technique achieved a significantly reduced breech rate and provided better trunk shift and radiographic shoulder height correction with preserved lumbar lordosis, resulting in significantly improved visual analog scale scores for back pain from the third postoperative month. Conclusion: Overall, robot-assisted PSI provides satisfactory radiographic and clinical outcomes in AIS patients.

Comparative Biomechanical Analysis of Unilateral, Bilateral, and Lateral Pedicle Screw Implantation in Oblique Lumbar Interbody Fusion: A Finite Element Study.

Oblique lumbar interbody fusion (OLIF) can be combined with different screw instrumentations. The standard screw instrumentation is bilateral pedicle screw fixation (BPSF). However, the operation is time consuming because a lateral recumbent position must be adopted for OLIF during surgery before a prone position is adopted for BPSF. This study aimed to employ a finite element analysis to investigate the biomechanical effects of OLIF combined with BPSF, unilateral pedicle screw fixation (UPSF), or lateral pedicle screw fixation (LPSF). In this study, three lumbar vertebra finite element models for OLIF surgery with three different fixation methods were developed. The finite element models were assigned six loading conditions (flexion, extension, right lateral bending, left lateral bending, right axial rotation, and left axial rotation), and the total deformation and von Mises stress distribution of the finite element models were observed. The study results showed unremarkable differences in total deformation among different groups (the maximum difference range is approximately 0.6248% to 1.3227%), and that flexion has larger total deformation (5.3604 mm to 5.4011 mm). The groups exhibited different endplate stress because of different movements, but these differences were not large (the maximum difference range between each group is approximately 0.455% to 5.0102%). Using UPSF fixation may lead to higher cage stress (411.08 MPa); however, the stress produced on the endplate was comparable to that in the other two groups. Therefore, the length of surgery can be shortened when unilateral back screws are used for UPSF. In addition, the total deformation and endplate stress of UPSF did not differ much from that of BPSF. Hence, combining OLIF with UPSF can save time and enhance stability, which is comparable to a standard BPSF surgery; thus, this method can be considered by spine surgeons.

Optimizing Spinal Fusion Cage Design to Improve Bone Substitute Filling on Varying Disc Heights: A 3D Printing Study.

The success of spinal fusion surgery relies on the precise placement of bone grafts and minimizing scatter. This study aims to optimize cage design and bone substitute filling methods to enhance surgical outcomes. A 3D printed lumbar spine model was utilized to implant 3D printed cages of different heights (8 mm, 10 mm, 12 mm, and 14 mm) filled with BICERA® Bone Graft Substitute mixed with saline. Two filling methods, SG cage (side hole for grafting group, a specially designed innovative cage with side hole, post-implantation filling) and FP cage (finger-packing group, pre-implantation finger packing, traditional cage), were compared based on the weight of the implanted bone substitute. The results showed a significantly higher amount of bone substitute implanted in the SG cage group compared to the FP cage group. The quantity of bone substitute filled in the SG cage group increased with the height of the cage. However, in the FP cage group, no significant difference was observed between the 12 mm and 14 mm subgroups. Utilizing oblique lumbar interbody fusion cages with side holes for bone substitute filling after implantation offers several advantages. It reduces scatter and increases the amount of implanted bone substitute. Additionally, it effectively addresses the challenge of insufficient fusion surface area caused by gaps between the cage and endplates. The use of cages with side holes facilitates greater bone substitute implantation, ultimately enhancing the success of fusion. This study provides valuable insights for future advancements in oblique lumbar interbody fusion cage design, highlighting the effectiveness of using cages with side holes for bone substitute filling after implantation.

Surgical outcomes of anterior lumbar interbody fusion in revision lumbar interbody fusion surgery.

BACKGROUNDS: Anterior lumbar interbody fusion (ALIF) is an attractive option for revision lumbar interbody fusion as it provides wide access for implant removal and accommodation of large interbody grafts for fusion. However, revision lumbar interbody fusion surgery has not been found to result in significantly better functional outcomes compared with other approaches. To date, no prognostic factors of anterior lumbar interbody fusion in revision lumbar interbody fusion have been reported. In this study, we investigated the surgical results and possible prognostic factors of anterior lumbar interbody fusion in revision lumbar interbody fusion. METHODS: Patients who received revision interbody fusion surgery between January 2010 and May 2018 in our hospital were reviewed. Clinical outcomes were determined according to whether the VAS score improvement in back pain and leg pain reached the minimum clinically important difference (MCID) and Macnab criteria. Radiographic outcomes were assessed with fusion rate, preoperative, and postoperative lumbar lordosis. Operative-relative factors that may affect clinical outcomes, such as BMI, existence of cage migration, cage subsidence, pseudarthrosis, previous procedure, and number of fusion segments, were collected and analyzed. RESULTS: A total of 22 consecutive patients who received ALIF for revision interbody fusion surgery were included and analyzed. There were 9 men and 13 women with a mean age at operation of 56 years (26-78). The mean follow-up was 73 months (20-121). The minimal clinically important difference (MCID) was reached in 11 (50%) of the patients for back pain and 14 (64%) for leg pain. According to the modified Macnab criteria, 73% of the patients in this study had successful outcomes (excellent or good). The pain and lumbar lordosis had significant improvement (P < 0.05). Preoperative fusion segment ≥ 2 was shown to be a poor prognostic factor for back pain improvement reaching MCID (P = 0.043). CONCLUSIONS: ALIF has proven effective for revision lumbar fusion surgery, yielding positive clinical and radiographic results. However, having two or more preoperative fusion segments can negatively impact back pain improvement. LEVEL OF EVIDENCE: IV.

Comparison of radiographic and clinical outcomes between ALIF, OLIF, and TLIF over 2-year follow-up: a comparative study.

BACKGROUND: Regarding the increasing adoption of oblique lateral interbody fusion (OLIF) for treating degenerative lumbar disorders, we aimed to evaluate whether OLIF, one of the options for anterolateral approach lumbar interbody fusion, demonstrate clinical superiority over anterior lumbar interbody fusion (ALIF) or posterior approach, represented by transforaminal lumbar interbody fusion (TLIF). METHODS: Patients who received ALIF, OLIF, and TLIF for symptomatic degenerative lumbar disorders during the period 2017-2019 were identified. Radiographic, perioperative, and clinical outcomes were recorded and compared during 2-year follow-up. RESULTS: A total of 348 patients with 501 correction levels were enrolled in the study. Fundamental sagittal alignment profiles were substantially improved at 2-year follow-up, particularly in the anterolateral approach (A/OLIF) group. The Oswestry disability index (ODI) and EuroQol-5 dimension (EQ-5D) in the ALIF group were superior when compared to the OLIF and TLIF group 2-year following surgery. However, comparisons of VAS-Total, VAS-Back, and VAS-Leg revealed no statistically significance across all approaches. TLIF demonstrated highest subsidence rate of 16%, while OLIF had least blood loss and was suitable for high body mass index patients. CONCLUSIONS: Regarding treatment for degenerative lumbar disorders, ALIF of anterolateral approach demonstrated superb alignment correction and clinical outcome. Comparing to TLIF, OLIF possessed advantage in reducing blood loss, restoring sagittal profiles and the accessibility at all lumbar level while simultaneously achieving comparable clinical improvement. Patient selection in accordance with baseline conditions, and surgeon preference both remain crucial issues circumventing surgical approach strategy.

Correlation of Foraminal Parameters with Patient-Reported Outcomes in Patient with Degenerative Lumbar Foraminal Stenosis.

The relationship between quantitative anatomic parameters in MRI and patient-reported outcomes (PROs) before and after surgery in degenerative lumbar foraminal stenosis remains unknown. We included 58 patients who underwent transforaminal lumbar interbody fusion (TLIF) for single-level degenerative disc disease with foraminal stenosis between February 2013 and June 2020. PROs were evaluated using the visual analog scale (VAS) for back and leg pain, Oswestry Disability Index (ODI), and EuroQol-5D (EQ-5D). The foraminal parameters assessed using preoperative MRI included foraminal height, posterior intervertebral disc height, superior and inferior foraminal width, and foraminal area. The correlation between foraminal parameters and PROs before operation, at 1 year follow-up, and change from baseline were assessed. The associations between the aforementioned parameters were examined using linear regression analysis. The analysis revealed that among these parameters, superior foraminal width was found to be significantly correlated with ODI and EQ-5D at the 1 year follow-up and with change in ODI and EQ-5D from baseline. The associations remained significant after adjustment for confounding factors including age, sex, body mass index, and duration of hospital stay. The results indicated that in degenerative lumbar foraminal stenosis, decreased superior foraminal width was associated with better improvement in disability and quality of life after TLIF.

Association of Body Mass Index with Long-Term All-Cause Mortality in Patients Who Had Undergone a Vertebroplasty for a Vertebral Compression Fracture.

We aimed to investigate the association between preoperative body mass index (BMI) and postoperative long-term mortality in patients who underwent a vertebroplasty. We retrospectively enrolled patients with a vertebral compression fracture who underwent a vertebroplasty between May 2013 and June 2020 in a medical center in Taiwan. The survival status of the study sample was confirmed by the end of March 2021. Cox-proportional hazard models were conducted to examine the effects of being overweight/obese (≥25 kg/m2 vs. <25 kg/m2) and BMI (as a continuous variable) on all-cause mortality after adjusting for age, sex, history of smoking, diabetes, hypertension, chronic kidney disease, and osteoporosis. A total of 164 patients were analyzed (mean age 75.8 ± 9.3 years, male 25.6%, mean BMI 24.0 ± 4.1 kg/m2) after a median follow-up of 785 days. Compared with a BMI < 25 kg/m2, a BMI ≥ 25 kg/m2 was associated with a significantly lower risk of all-cause mortality (HR 0.297, 95% CI 0.101 to 0.878, p = 0.028). These findings were consistent when BMI was examined as a continuous variable (HR 0.874, 95% CI 0.773 to 0.988, p = 0.031). A low BMI (<22 kg/m2) should be considered as a risk factor for postoperative long-term mortality in this ageing population.

Indirect decompression via oblique lumbar interbody fusion is sufficient for treatment of lumbar foraminal stenosis.

Oblique lumbar interbody fusion (OLIF) is a popular technique for the treatment of degenerative lumbar spinal disease. There are no clear guidelines on whether direct posterior decompression (PD) is necessary after OLIF. The purpose of this study was to analyze the effect of the indirect decompression obtained from OLIF in patients with lumbar foraminal stenosis. We retrospectively reviewed 33 patients who underwent OLIF surgery for degenerative lumbar spinal disease between 1 January 2018, and 30 June 2019. The inclusion criteria included patients who were diagnosed with lumbar foraminal stenosis by preoperative MRI. The exclusion criteria included the presence of central canal stenosis, spinal infection, vertebral fractures, and spinal malignancies. The clinical results, evaluated using the visual analogue scale of back pain (VAS-Back), VAS of leg pain (VAS-Leg), and Oswestry disability index (ODI), were recorded. The radiologic parameters were also measured. The VAS-Back, VAS-Leg, and ODI showed significant improvement in both the PD and non-posterior decompression (Non-PD) groups postoperatively (all, p < 0.05). Patients in the Non-PD group showed better results than those in the PD group in the VAS-Back at 12- and 24 months postoperatively (0.00 vs. 3.00 postoperatively at 12 months, p = 0.030; 0.00 vs. 4.00 postoperatively at 24 months, p = 0.009). In addition, the ODI at 24 months postoperatively showed better improvement in the Non-PD group (8.89 vs. 24.44, p = 0.038). The disc height in both the PD and the Non-PD groups increased significantly postoperatively (all, p < 0.05), but the restoration of foraminal height was significantly different only in the Non-PD group. There was no statistically significant difference in cage position, cage subsidence, fusion grade, or screw loosening between the PD and the Non-PD groups. Indirect decompression via OLIF for lumbar foraminal stenosis showed favorable outcomes. The use of interbody cages and posterior instrumentation was sufficient for relieving symptoms in patients with lumbar foraminal stenosis. Additional direct posterior decompression may deteriorate results in the follow-up period.

Robot-Assisted Pedicle Screw Placement Led to Lower Screw Loosening Rate than Fluoroscopy-Guided Technique in Transforaminal Lumbar Interbody Fusion for Lumbar Degenerative Disease: A Single-Center Retrospective Study.

Robot-assisted pedicle screw placement for spine surgery has become popular in recent years. This study compares clinical, radiographic outcomes and the screw loosening rate between robot-assisted and fluoroscopy-guided pedicle screw placement in patients who underwent transforaminal lumbar interbody fusion (TLIF). We retrospectively examined 108 patients with the degenerative lumbar disease who underwent TLIF. According to whether the robotic system was used, patients were assigned to either the robot-assisted (Ro TLIF, n = 29) or fluoroscopy-guided TLIF (FG TLIF, n = 79) group. Radiographic parameters and patient-reported outcomes, including leg and back pain visual analog scale (VAS) and Oswestry Disability Index (ODI), were assessed. Loosening signs were noted in 48 out of 552 pedicle screws. The screw loosening rate was higher in the FG TLIF (10.2%) than Ro TLIF group (4.3%). A significant correlation was found between screw loosening and age, the number of level(s) fused, and the ratio of the average distance from the pedicle screw to the upper endplate to vertebral body height. VAS-leg, VAS-back, and ODI showed significant improvements in both groups postoperatively (all p < 0.05). These results indicated that robot-assisted pedicle screw placement in TLIF had a lower screw loosening rate and similar patient-reported outcomes compared with the fluoroscopy-guided technique.

The Impact of COVID-19 Surges in 2019-2021 on Patient-Reported Outcome Measures After Spine Surgery at an Academic Tertiary Referral Center in Taiwan: A Retrospective Observational Cohort Study.

Aim: Limited data are available on the impact of the coronavirus disease 2019 (COVID-19) pandemic on patient-reported outcome measures (PROMs) in patients who underwent spine surgery. In this study, we aimed to investigate the associations between the COVID-19 outbreak in Taiwan (May 2021) and PROMs in patients who underwent spine surgery. Method: We retrospectively identified patients who underwent spine surgery during identical defined 6-week time-intervals (May 16 to June 30) in 2019, 2020, and 2021. PROMs, including visual analog scale (VAS) score for pain, Oswestry disability index (ODI), and EuroQol-5D (EQ-5D), were investigated before surgical intervention and at a 1-month follow-up. Relevant clinical information was collected from the electronic medical records of patients. Linear regression analysis was used to examine the association between the pandemic in 2021 (vs. 2019/2020) and the PROMs after adjusting for age, sex, and relevant clinical variables. Results: The number of patients who underwent spine surgery at our hospital during the identical defined 6-week time-intervals in 2019, 2020, and 2021 was 77, 70, and 48, respectively. The surgical intervention significantly improved VAS, ODI, and EQ-5D of the patients (1 month after surgery vs. before surgery, all p < 0.001) in all three study periods. However, there was a significant between-group difference in change from baseline in VAS (p = 0.002) and EQ-5D (p = 0.010). The decrease in VAS and increase in EQ-5D after surgery in 2021 were not as much as those in 2019 and 2020. The associations between the pandemic in 2021 (vs. 2019/2020) and changes in VAS (ß coefficient 1.239; 95% confidence interval [CI] 0.355 to 2.124; p = 0.006) and EQ-5D (ß coefficient, -0.095; 95% CI, -0.155 to -0.035; p = 0.002) after spine surgery were independent of relevant clinical factors. Conclusion: There was less improvement in short-term PROMs (VAS and EQ-5D) after spine surgery during the COVID-19 pandemic. Assessment of PROMs in surgical patients during a pandemic may be clinically relevant, and psychological support in this condition might help improve patients' outcomes.

The Morphological Changes in Adjacent Segments Amongst Patients Receiving Anterior and Oblique Lumbar Interbody Fusion: A Retrospective Study.

Adjacent segment disease (ASD) is troublesome condition that has proved to be highly related to spinal malalignment after spinal surgery. Hence, we aimed to evaluate the morphological changes after anterior lumbar interbody fusion (ALIF) and oblique LIF (OLIF) to establish the differences between the two surgical methods in terms of possible ASD avoidance. Fifty patients, half of whom received ALIF while the other half received OLIF, were analyzed with image studies and functional outcomes during the pre-operative and post-operative periods, and 2 years after surgery. Image measurements obtained included spinal-pelvic parameters, index lordosis (IL), segmental lordosis (SL), anterior disc height (ADH), posterior disc height (PDH) and adjacent segment disc angle (ASDA). The ADH and PDH in the adjacent segment decreased in the two groups while OLIF showed greater decrease without radiological ASD noted at 2-year follow-up. Both groups showed an increase in IL after surgery while ALIF showed greater improvement. No statistical difference was identified in functional outcomes between LIFs. We suggest that both ALIF and OLIF can restore adequate lordosis and prevent ASD after surgery. However, it should be noted that patient selection remains crucial when making any decision involving which of the two methods to use.

Correlation between Preoperative Serum Levels of Calcium, Phosphate, and Intact Parathyroid Hormone and Radiological Outcomes in Spinal Interbody Fusion among End-Stage Renal Disease Patients.

Spinal fusion surgery for end-stage renal disease (ESRD) patients is a clinical challenge. This study aimed to investigate whether postoperative radiological outcomes are related to preoperative serum calcium, phosphate, or intact parathyroid hormone (iPTH) levels in patients with ESRD who underwent spinal interbody fusion surgery. This study included 62-consecutive patients with ESRD who underwent anterior cervical discectomy and fusion (ACDF) or transforaminal lumbar interbody fusion (TLIF) surgery for symptomatic spinal disorder. The most recent preoperative serum calcium, phosphate, and iPTH levels were recorded, and the postoperative radiographic outcomes were assessed. A significant correlation was found between the occurrence of cage subsidence and higher blood phosphate, calcium-phosphate product (Ca × P), and iPTH levels in the TLIF group. The occurrence of pedicle screw loosening was related to higher blood phosphate and Ca × P product in the TLIF group. However, no correlation was found between the fusion grades and the serum levels in either the TLIF or ACDF groups. These results indicated that higher preoperative serum phosphate and Ca × P product are risk factors for both cage subsidence and screw loosening in patients with ESRD who underwent TLIF surgery. Higher iPTH levels are also a possible risk factor for cage subsidence.

Biomechanical analysis of reduction technique for lumbar spondylolisthesis: anterior lever versus posterior lever reduction method.

BACKGROUND: Reduction of lumbar spondylolisthesis during spinal fusion surgery is important for improving the fusion rate and restoring the sagittal alignment. Despite the variety of reduction methods, the fundamental mechanics of lumbar spondylolisthesis reduction remain unclear. This study aimed to investigate the biomechanical behavior while performing spondylolisthesis reduction with the anterior and posterior lever reduction method. METHODS: We developed an L4-L5 spondylolisthesis model using sawbones. Two spine surgeons performed the simulated reduction with a customized Cobb elevator. The following data were collected: the torque and angular motion of Cobb, displacement of vertebral bodies, change of lordotic angle between L4 and L5, total axial force and torque applied on the model, and force received by adjacent disc. RESULTS: Less torque value (116 N-cm vs. 155 N-cm) and greater angular motion (53o vs. 38o) of Cobb elevator were observed in anterior lever reduction. Moreover, the total axial force received by the entire model was greater in the posterior lever method than that in the anterior lever method (40.8 N vs. 16.38 N). Besides, the displacement of both vertebral bodies was greater in the anterior lever method. CONCLUSIONS: The anterior lever reduction is a more effort-saving method than the posterior lever reduction method. The existing evidence supports the biomechanical advantage of the anterior reduction method, which might be one of the contributing factors to successfully treating high-grade lumbar spondylolisthesis with short-segment instrumentation.

The radiological outcome in lumbar interbody fusion among rheumatoid arthritis patients: a 20-year retrospective study.

BACKGROUND: Clinical outcomes amongst Rheumatoid Arthritis (RA) patients have shown satisfactory results being reported after lumbar surgery. The increased adoption of the interbody fusion technique has been due to a high fusion rate and less invasive procedures. However, the radiographic outcome for RA patients after receiving interbody fusion has scarcely been addressed in the available literature. METHODS: Patients receiving interbody fusion including ALIF, OLIF, and TLIF were examined for implant cage motion and fusion status at two-year follow-up. Parameters for the index correction level including ADH, PDH, WI, SL, FW, and FH were measured and compared at pre-OP, post-OP, and two-year follow-up. RESULTS: We enrolled 64 RA patients at 104 levels (mean 64.0 years old, 85.9% female) received lumbar interbody fusion. There were substantial improvement in ADH, PDH, WI, SL, FW, and FH after surgery, with both ADH and PDH having significantly dropped at two-year follow up. The OLIF group suffered from a higher subsidence rate with no significant difference in fusion rate when compared to TLIF. The fusion rate and subsidence rate for all RA patients was 90.4 and 28.8%, respectively. CONCLUSIONS: We revealed the radiographic outcomes of lumbar interbody fusions towards symptomatic lumbar disease in RA patients with good fusion outcome despite the relative high subsidence rate amongst the OLIF group. Those responsible for intra-operative endplate management should be more cautious to avoid post-OP cage subsidence.

Direct reduction of high-grade lumbosacral spondylolisthesis with anterior cantilever technique - surgical technique note and preliminary results.

BACKGROUNDS: Surgical reduction for high-grade spondylolisthesis is beneficial for restoring sagittal balance and improving the biomechanical environment for arthrodesis. Compared to posterior total laminectomy and long instrumentation, anterior lumbar inter-body fusion (ALIF) is less invasive and has the biomechanical advantage of restoring the original disk height and increasing lumbar lordosis, thus improving sagittal balance. However, the application of ALIF is still limited in treating low-grade spondylolisthesis. In this study, we developed a new technique termed anterior cantilever procedure to directly reduce the slippage of high-grade lumbosacral spondylolisthesis. The purpose of our study was to investigate the surgical outcomes of the anterior cantilever procedure followed by ALIF and posterior mono-segment instrumented fixation in high-grade spondylolisthesis. METHODS: All patients with high-grade spondylolisthesis who underwent anterior cantilever procedure followed by anterior lumbar inter-body fusion (ALIF) and posterior mono-segment instrumented fixation between November 2006 and July 2017 were enrolled in our study. The slip percentage, Dubousset's lumbosacral angle, pelvic tilt, sacral slope, pelvic incidence, and sagittal alignment were measured pre-operatively and postoperatively at the last follow-up. Surgery time, blood loss, complications, and hospital stay were also collected and analysed. RESULTS: A total of 11 consecutive patients with high-grade spondylolisthesis patients were included and analysed. All of the high-grade spondylolisthesis in our series occurred at the L5-S1 level. The median age was 37 years, and the median follow-up duration was 36 months. The average slip reduction was 30% (60 to 30%, P < 0.01), and the average correction of Dubousset's lumbosacral angle was 13.8° (84.1° to 97.9°, P < 0.01). The median intra-operative blood loss was 300 mL. All patients attained improved sagittal balance after the operation and achieved solid fusion within 9 months after surgery. No incidences of implant failure, permanent neurological deficit, or pseudarthrosis were recorded at the last follow-up. CONCLUSIONS: Anterior cantilever procedure followed by ALIF and posterior mono-segment instrumented fixation is a valid procedure for treating high-grade spondylolisthesis. It achieved a high fusion rate, partially reduced slippage, and significantly improved lumbosacral angle, while minimizing common complications, such as pseudarthrosis, nerve traction injury, excessive soft tissue dissection, and blood loss in posterior reduction procedures. However, posterior instrumentation is still required to the structural stability in the ALIF procedure. LEVEL OF EVIDENCE: IV.

Biomechanical analysis of the treatment of intertrochanteric hip fracture with different lengths of dynamic hip screw side plates.

BACKGROUND: Dynamic hip screw (DHS) is a common implant used to treat stable-type intertrochanteric hip fractures. There are many factors that can affect the success rate of the surgery, including the length of side plates. It is therefore important to investigate the biomechanical effect of different DHS side plates on bones. OBJECTIVE: In order to reduce the likelihood of an implant failure, the aim of this study was to use finite element analysis (FEA) to investigate and understand the effect of side plates with different lengths in DHS. METHODS: In this FEA study, a 3D model with cortical bone, cancellous bone, side plate, lag screw, and cortical screws to simulate the implantation of DHS with different lengths of side plate (2-hole, 4-hole, and 6-hole) for intertrochanteric hip fractures was constructed. The loading condition was used to simulate the force (400 N) on the femoral head and the stress distribution on the lag screw, side plate, cortical screws, and femur was measured. RESULTS: The highest stress points occured around the region of contact between the screw and the cortical bones. The stress on the femur at the most distal cortical screw was the greatest. The shorter the length of the side plate, the greater the stress on the cortical screws, resulting in an increased stress on the femur surrounding the cortical screws. CONCLUSIONS: The use of DHS with 2-hole side plate may increase the risk of side plate pull-out. The results of this study provide a biomechanical analysis for selection of DHS implant lengths that can be useful for orthopaedic surgeons.

Novel, safe, and easy spinal osteotomy for regional kyphotic deformities.

OBJECTIVE: This study aimed to assess the efficacy and safety of a newly developed transpedicular, anterior open-wedge osteotomy procedure with lamina preservation to correct sagittal imbalance in regional kyphotic deformities following compression fractures. METHODS: All seven patients [four females and three males; mean (range) age, 67 (56-78) years] included in this study underwent surgery between May 2005 and May 2016 for symptomatic, rigid kyphosis secondary to compression fractures. Transpedicular, anterior open-wedge osteotomy with lamina preservation was performed in all patients using an osteotome to create a transverse fracture in the vertebral body through bilateral pedicles and an anterior open-wedge space filled with compacted bone graft to correct kyphosis. Pre- and post-operative kyphotic Cobb angles were evaluated, and the volume of intra-operative blood loss was measured. RESULTS: The pre- and post-operative kyphotic Cobb angle was 35.3° and 17.7°, respectively (p<0.01); mean angle correction was 17.6° (p<0.05). No patient developed any complication with neurologic injury. Mean blood loss was 771 mL. Callus formation viewed on plain film was evident in all patients and was accompanied by decreased thoracolumbar back pain. CONCLUSION: Transpedicular, anterior open-wedge osteotomy with lamina preservation is an easy and safe spinal osteotomy procedure for the correction of regional, fixed kyphotic deformities. LEVEL OF EVIDENCE: Level IV, Therapeutic study.

Effects of multidisciplinary team care on the survival of patients with different stages of non-small cell lung cancer: a national cohort study.

In Taiwan, cancer is the top cause of death, and the mortality rate of lung cancer is the highest of all cancers. Some studies have demonstrated that multidisciplinary team (MDT) care can improve survival rates of non-small cell lung cancer (NSCLC) patients. However, no study has discussed the effect of MDT care on different stages of NSCLC. The target population for this study consisted of patients with NSCLC newly diagnosed in the 2005-2010 Cancer Registry. The data was linked with the 2002-2011 National Health Insurance Research Database and the 2005-2011 Cause of Death Statistics Database. The multivariate Cox proportional hazards model was used to explore whether the involvement of MDT care had an effect on survival. This study applied the propensity score as a control variable to reduce selection bias between patients with and without involvement of MDT care. The adjusted hazard ratio (HR) of death of MDT participants with stage III & IV NSCLC was significantly lower than that of MDT non-participants (adjusted HR = 0.87, 95% confidence interval = 0.84-0.90). This study revealed that MDT care are significantly associated with higher survival rate of patients with stage III and IV NSCLC, and thus MDT care should be used in the treatment of these patients.