One-dimensional and comprehensive two-dimensional gas chromatographic approaches for the characterization of post-consumer recycled plastic materials.

In September 2022, the European Commission published its new regulation on recycled plastic materials for food contact. It allows newly developed, non-authorized technologies and approaches, or so-called novel technologies, to be deployed in the field to generate the data needed for establishing regulatory and/or fit for purpose processes. The data shall be generated by using suitable methods, but the regulation does not give a more detailed description on those. In this study, commercially purchased buckets made of post-consumer recycled polypropylene were screened, using a number of different analytical approaches. Sample preparation methods, analysis techniques, and the data and information generated were compared. The results clearly demonstrate the need for a detailed characterization of such materials and the advantages and disadvantages of the analysis using conventional gas chromatography with flame ionization detection and mass spectrometery as well as two-dimensional comprehensive gas chromatography with time of flight mass spectrometry.

Mineral oil saturated and aromatic hydrocarbons quantification: Mono- and two-dimensional approaches.

The determination of the level of mineral oil contamination in foods is a well-known problem. This class of contaminants is generally divided into mineral oil saturated and aromatic hydrocarbons with different toxicological relevance and analytical challenges. Among the many challenges, data interpretation and integration represent an important source of uncertainty in the results provided by different laboratories leading to a variation evaluated on the order of 20%. The use of multidimensional comprehensive gas chromatography (GC × GC) has been proposed to support the data interpretation but the integration and the reliability of the results using this methodology has never been systematically evaluated. The aim of this work was to assess the integration and quantification performance of a two-dimensional (2D) software. The data were generated using a novel, completely automated platform, namely LC-GC × GC coupled to dual detectors, i.e., time-of-flight mass spectrometer (MS) and flame ionization detector (FID). From a systematic study of the failures of the two-dimensional quantification approach a novel solution was proposed for simplifying and automating the entire process. The novel algorithm was tested on ad hoc created samples (i.e. a paraffin mixture added of n-alkanes) and real-world samples proving the agreement of the results obtained by LC-GC × GC and the traditional mono-dimensional approach. Moreover, the benefits of using an entirely integrated platform were emphasized, particularly regarding the identity confirmation capability of the MS data, which can be easily translated into the 2D FID quantification feature.

Quali-quantitative characterization of the volatile constituents in Cordia verbenacea D.C. essential oil exploiting advanced chromatographic approaches and nuclear magnetic resonance analysis.

Cordia verbenacea D.C. (Boraginaceae, Varronia curassavica Jacq. synonym) is a medicinal plant, native from Brazil, especially the leaves are used in folk medicine. The aim of this study was to extend the characterization of the volatile fraction of the essential oil obtained from this plant, by using GC-FID, GC-MS, and chiral GC. Moreover, to further clarify the composition of the volatile fraction, preparative multidimensional-GC (prep-MDGC) was used to collect unknown compounds, followed by NMR characterization. Specifically, the chemical characterization, both qualitative and quantitative, of the volatile fraction of the essential oil obtained from Cordia verbenacea cultivated in the Minas Gerais area (central area of Brazil) was investigated for the first time. The principal components from a quantitative point of view were α-pinene (25.32%; 24.48g/100g) and α-santalene (17.90%; 17.30g/100g), belonging to the terpenes family. Chiral-GC data are reported for the enantiomeric distribution of 7 different components. Last, to obtain the complete characterization of the essential oil constituents, prep-MDGC analysis was used to attain the isolation of two compounds, not present in the principal MS databases, which were unambiguously identified by NMR investigation as (E)-α-santalal and (E)-α-bergamotenal, reported for the first time in Cordia verbenacea essential oil.

Performance evaluation of a versatile multidimensional chromatographic preparative system based on three-dimensional gas chromatography and liquid chromatography-two-dimensional gas chromatography for the collection of volatile constituents.

The present research deals with the multi-collection of the most important sesquiterpene alcohols belonging to sandalwood essential oil, as reported by the international regulations: (Z)-α-santalol, (Z)-α-trans bergamotol, (Z)-ß-santalol, epi-(Z)-ß-santalol, α-bisabolol, (Z)-lanceol, and (Z)-nuciferol. A versatile multidimensional preparative system, based on the hyphenation of liquid and gas chromatography techniques, was operated in the LC-GC-GC-prep or GC-GC-GC-prep configuration, depending on the concentration to be collected from the sample, without any hardware or software modification. The system was equipped with a silica LC column in combination with polyethylene glycol-poly(5% diphenyl/95% dimethylsiloxane)-medium polarity ionic liquid or ß-cyclodextrin based GC stationary phases. The GC-GC-GC-prep configuration was exploited for the collection of four components, by using a conventional split/splitless injector, while the LC-GC-GC-prep approach was applied for three low abundant components (<5%), in order to increase the quantity collected within a single run, by the LC injection of a high sample amount. All target compounds, whose determination is hampered by the unavailability of commercial standards, were collected at milligram levels and with a high degree of purity (>87%).

Rapid isolation of high solute amounts using an online four-dimensional preparative system: normal phase-liquid chromatography coupled to methyl siloxane-ionic liquid-wax phase gas chromatography.

This study reports the recent evolution of a multidimensional GC-GC-GC preparative system, now combined with an online LC preseparation step, operated under normal phase conditions. It is herein shown that the four-dimensional instrument can collect sample components with a concentration lower than 10%, in a short time period, while maintaining a high level of analyte purity. The LC dimension allows (I) the injection of higher sample amounts, compared to "direct" GC injection; (II) a polarity-based preseparation, leading to the GC injection of simplified subsamples, and thus reducing the possibility of coelutions; (III) to eliminate the essential-oil "matrix", replacing it with the LC mobile phase (the GC system is more protected from potential contamination); (IV) the LC mobile phase is of much lower viscosity with respect to a pure, or highly concentrated essential oil, avoiding difficulties in the syringe sample withdrawal process, prior to GC injection. System optimization was performed by using standard solutions; in addition, a very complex sample, namely, vetiver essential oil, was subjected to the preparative process, with the scope of isolating two low-amount constituents (namely, α-amorphene and ß-vetivone). The latter two sesquiterpenoids, which accounted for 1.7 and 4.0% of the sample (considering the volatiles), respectively, were successfully collected at the milligram level, in a one-day work period, with a purity degree in excess of 90%.

Rapid collection and identification of a novel component from Clausena lansium Skeels leaves by means of three-dimensional preparative gas chromatography and nuclear magnetic resonance/infrared/mass spectrometric analysis.

The present research reports the use of a three-dimensional preparative gas chromatography (prep GC) system, equipped with three Deans-switch devices and 5%diphenyl/wax/mid-polarity ionic liquid stationary phases, for the isolation of volatile components from a complex natural source, namely wampee essential oil (derived from Clausena lansium Skeels leaves). Collection was performed by using a simple and effective lab-constructed trapping device. Initially, an unknown (and abundant) wampee oil constituent was erroneously identified as α-sinensal, through an MS database search (a low similarity match was attained), performed after a GC-quadMS experiment., The unknown compound was then the isolated by using the novel prep GC system, in a highly pure form (at the mg level), and was correctly identified by using nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR) and mass spectrometry (MS). Both FTIR and MS data were used to confirm the NMR information. The name given to the molecule was (2E,6E)-2-methyl-6-(4-methylcyclohex-3-enylidene)hept-2-enal. The results herein described will demonstrate the need for a high-resolution GC step, prior to analyte collection, in the prep GC analysis of complex samples.

Increasing the isolated quantities and purities of volatile compounds by using a triple Deans-switch multidimensional preparative gas chromatographic system with an apolar-wax-ionic liquid stationary-phase combination.

A novel preparative-scale triple gas chromatographic system, equipped with three Deans-switch devices, is herein described. The isolation of volatile compounds was achieved by using a lab-made collection system. Considerations are made on the possibility to inject high volumes of neat sample, maintaining, at the same time, high resolution levels. The degree of recovery of a series of compounds, characterized by a differing volatility, is also reported. In this respect, different collection conditions were evaluated, namely, the presence (or not) of packing material as well as CO(2) cooling, in various combinations. Finally, the interconnected features, that is time requirements and the isolation of "acceptable" analyte quantities (e.g., milligram level for NMR characterization), are related to parameters such as analyte concentration, injected volume, collection conditions, and number of GC runs. The results herein reported will demonstrate the need for a high-resolution GC step, prior to analyte collection, in the prep-GC analysis of complex samples.