Ultrasound-assisted efficient and convenient method of extracting valuable metals (Ni, Co, and Cd) from waste Ni-Cd batteries using DL-malic acid.

Recycling waste Ni-Cd batteries has received much attention recently because of the serious environmental pollution they cause and to avoid the dissipation of valuable metals. Despite significant research, it is still difficult to efficiently recycle valuable and hazardous metals from waste Ni-Cd batteries in an economical and environmentally friendly manner. This study employed a novel process utilizing ultrasound-assisted leaching to recover Ni, Cd, and Co from waste nickel-cadmium (Ni-Cd) batteries. Organic DL-malic acid served as the leaching agent and H2O2 was employed as an oxidizing agent. The effects of various factors on the recovery efficiency of Ni, Cd, and Co, such as leaching temperature, time, DL-malic acid concentration, pulp density, H2O2 concentration, and ultrasound frequency, were also examined. To predict the chemical compounds present before and after the recycling experiments, the solid residues from the metal extraction were analyzed using XRD, XPS, FE-SEM, and EDS element mapping. Concurrently, ICP-OES was utilized to determine the metal content in the leachate. Under optimized conditions of 90 °C, 90 min, 2M DL-malic acid, 160 mL/g pulp density, and 20% ultrasound frequency, over 83% of Ni, 94% of Cd, and 98% of Co were effectively leached from the waste Ni-Cd battery powder. The leaching kinetics of Ni, Cd, and Co followed the surface chemical reaction control model. The activation energies (Ea) for Ni, Cd, and Co leaching were 21.34, 20.47, and 18.38 kJ/mol, respectively. The findings suggest that ultrasound-assisted leaching is an efficient, cost-effective, environmentally friendly, and sustainable alternative for extracting precious and hazardous metals from waste Ni-Cd batteries. Additionally, it reduces industrial chemical usage and enhances waste management sustainability.

In vitro fatigue behavior and in vivo osseointegration of the auxetic porous bone screw.

The incidence of screw loosening, migration, and pullout caused by the insufficient screw-bone fixation stability is relatively high in clinical practice. To solve this issue, the auxetic unit-based porous bone screw (AS) has been put forward in our previous work. Its favorable auxetic effect can improve the primary screw-bone fixation stability after implantation. However, porous structure affected the fatigue behavior and in vivo longevity of bone screw. In this study, in vitro fatigue behaviors and in vivo osseointegration performance of the re-entrant unit-based titanium auxetic bone screw were studied. The tensile-tensile fatigue behaviors of AS and nonauxetic bone screw (NS) with the same porosity (51%) were compared via fatigue experiments, fracture analysis, and numerical simulation. The in vivo osseointegration of AS and NS were compared via animal experiment and biomechanical analysis. Additionally, the effects of in vivo dynamic tensile loading on the osseointegration of AS and NS were investigated and analyzed. The fatigue strength of AS was approximately 43% lower while its osseointegration performance was better than NS. Under in vivo dynamic tensile loading, the osseointegration of AS and NS both improved significantly, with the maximum increase of approximately 15%. Preferrable osseointegration of AS might compensate for the shortage of fatigue resistance, ensuring its long-term stability in vivo. Adequate auxetic effect and long-term stability of the AS was supposed to provide enough screw-bone fixation stability to overcome the shortages of the solid bone screw, developing the success of surgery and showing significant clinical application prospects in orthopedic surgery. STATEMENT OF SIGNIFICANCE: This research investigated the high-cycle fatigue behavior of re-entrant unit-based auxetic bone screw under tensile-tensile cyclic loading and its osseointegration performance, which has not been focused on in existing studies. The fatigue strength of auxetic bone screw was lower while the osseointegration was better than non-auxetic bone screw, especially under in vivo tensile loading. Favorable osseointegration of auxetic bone screw might compensate for the shortage of fatigue resistance, ensuring its long-term stability and longevity in vivo. This suggested that with adequate auxetic effect and long-term stability, the auxetic bone screw had significant application prospects in orthopedic surgery. Findings of this study will provide a theoretical guidance for design optimization and clinical application of the auxetic bone screw.

Recycling of NCM cathode material from spent lithium-ion batteries via polyvinyl chloride and chlorinated polyvinyl chloride in subcritical water: A comparative study.

To date, numerous studies have explored recycling of lithium, nickel, cobalt, and manganese (NCM) from spent lithium-ion batteries (LIBs). Nevertheless, the leaching and efficient separation of the precious metals from NCM active cathode material via an environmentally benign and economical process is still challenging. Therefore, in this research, we present a novel and energy an efficient route through which to leach valuable metals, for example, lithium (Li), nickel (Ni), cobalt (Co), and manganese (Mn) from the NCM cathode material of the waste LIBs using water-containing waste chlorinated polyvinyl chloride (CPVC) or polyvinyl chloride (PVC) in a batch reactor. Parameters such as temperature, time, liquid-solid, and mass ratios on the extraction efficiencies of Li, Ni, Co, and Mn were carefully examined. The outcomes show that CPVC performed better than PVC for the extraction of valuable metals from NCM material, and this was attributed to its high Cl contents. The maximum extraction efficiencies of Li, Ni, Co, and Mn (99.15%, 98.10%, 99.30%, and 100%, respectively) were achieved under optimized reaction conditions: a temperature of 290 °C, reaction time of 1 h, a liquid-solid ratio 60:1 mL/g and solid to solid mass ratio of 1:3. The apparent activation energies (Ea) for Li, Ni, Co, and Mn were computed to be (24.42, 28.85, 29.67, and 28.79) kJ/mol. The results obtained in this work, indicated that it may contribute to efforts aiming to reduce industrial chemical consumption and increase sustainability in waste management technique.

Rapid leaching and recovery of valuable metals from spent Lithium Ion batteries (LIBs) via environmentally benign subcritical nickel-containing water over chlorinated polyvinyl chloride.

This study presents the development of an effective and environmentally friendly method to leach and to recover valuable metals, such as lithium (Li) and cobalt (Co) from the spent lithium-ion batteries (LIBs) using subcritical water assisted by nickel catalyst and waste chlorinated polyvinyl chloride (CPVC). The effects of reaction parameters, such as Ni2+ concentration, temperature, time, and liquid-solid ratio on the leaching efficiencies of Li and Co were carefully investigated. The solid residues obtained thereof were characterized by XRD and SEM-EDS analyses, while the leachates were analyzed by ICP-OES. The ICP-OES results showed that about 99.05% of Li and 98.08% of Co were effectively leached from the spent LiCoO2 powder under the following optimized reaction conditions: temperature of 240 °C, reaction time of 40 min, Ni2+ concentration of 0.04 M, and the liquid-solid ratio of 25:1 mL/g, respectively. Finally, based on the precipitation method, the Li and Co were recovered from the leachate as Li2CO3 and Co(OH)2. The results and the method applied in this research suggest that the leaching and recovery of Li and Co from the spent LIBs using subcritical nickel-containing water is an inexpensive, efficient, sustainable and eco-friendly technology.

Bio-inspired hollow PDMS sponge for enhanced oil-water separation.

Oil spills from disasters such as the sinking of ships and the discharge of oily wastes cause serious environmental problems. Polydimethylsiloxane(PDMS) sponges are valuable tools for isolating spilled oil. Here, we propose new PDMS sponges with bio-inspired design and enhanced absorption capacities. 3D printing was used to produce templates having negative designs, and after being filled with PDMS, the templates were selectively dissolved. Through this, PDMS sponges with well-interconnected and controlled porosities were produced within 10% error. The wettability of sponges with various pore sizes and line widths was investigated. The surfaces were found to be highly hydrophobic, with water contact angles of 100-143°, and oleophilic, with oil contact angles of ∼0°. The sponge fabricated with line width of 200 µm and pore size of 400 µm showed the highest hydrophobicity and oleophilicity. These parameters were used to produce the surfaces of hollow sponges having bio-inspired design that mimics the water absorption and storage functions of cactus. Repeated oil-water separation testing was conducted, and the absorption capacities were compared with those of non-hollow and conventional sponges. The new design showed absorption capacity up to 3.7 times that of the sponges. The bio-inspired PDMS sponge provides a significant advance in oil-water separation ability.

A rational tissue engineering strategy based on three-dimensional (3D) printing for extensive circumferential tracheal reconstruction.

Extensive circumferential tracheal defects remain a major challenging problem in the field of tracheal reconstruction. In this study, a tissue-engineered tracheal graft based on three-dimensional (3D) printing was developed for extensive circumferential tracheal reconstruction. A native trachea-mimetic bellows scaffold, a framework for a tissue-engineered tracheal graft, was indirectly 3D printed and reinforced with ring-shaped bands made from medical grade silicone rubber. A tissue-engineered tracheal graft was then created by stratifying tracheal mucosa decellularized extracellular matrix (tmdECM) hydrogel on the luminal surface of the scaffold and transferring human inferior turbinate mesenchymal stromal cell (hTMSC) sheets onto the tmdECM hydrogel layer. The tissue-engineered tracheal graft with critical length was anastomosed end-to-end to the native trachea and complete re-epithelialization was achieved on the entire luminal surface within 2 months in a rabbit model with no post-operative complications. With this successful result, the present study reports the preliminary potential of the tissue-engineered tracheal graft as a rational tissue engineering strategy for extensive circumferential tracheal reconstruction.

Photobiomodulation of extracellular matrix enzymes in human nucleus pulposus cells as a potential treatment for intervertebral disk degeneration.

Intervertebral disc (IVD) degeneration is associated with imbalances between catabolic and anabolic responses, regulated by extracellular matrix (ECM)-modifying enzymes such as matrix metalloproteinases (MMPs) and their endogenous tissue inhibitors of metalloproteinases (TIMPs). Potential contributing factors, such as interleukin (IL)-1ß and tumor necrosis factor (TNF)-α, derived from infiltrated, activated macrophages within IVD tissues, can trigger abnormal production of ECM-modifying enzymes and progression of IVD degeneration. Novel therapies for regulating ECM-modifying enzymes can prevent or ameliorate IVD degeneration. Photobiomodulation (PBM), known to regulate wound repair, exhibits regenerative potential by modulating biological molecules. This study examined the effects of PBM, administered at various wavelengths (630, 525, and 465 nm) and energy densities (16, 32, and 64 J/cm2), on the production of ECM-modifying enzymes in replicated degenerative IVD. Our results showed that PBM selectively inhibited the production of ECM-modifying enzymes in a dose- and wavelength-dependent manner, suggesting that it could be a novel tool for treating symptomatic IVD degeneration.

Comparison of tracheal reconstruction with allograft, fresh xenograft and artificial trachea scaffold in a rabbit model.

This study evaluated the possibility of tracheal reconstruction with allograft, pig-to-rabbit fresh xenograft or use of a tissue-engineered trachea, and compared acute rejection of three different transplanted tracheal segments in rabbits. Eighteen healthy New Zealand White rabbits weighing 2.5-3.1 kg were transplanted with three different types of trachea substitutes. Two rabbits and two alpha 1, 3-galactosyltransferase gene-knockout pigs weighing 5 kg were used as donors. The rabbits were divided into three groups: an allograft control group consisting of rabbit-to-rabbit allotransplantation animals (n = 6), a fresh xenograft group consisting of pig-to-rabbit xenotransplantation animals (n = 6), and an artificial trachea scaffold group (n = 6). All animals were monitored for 4 weeks for anastomotic complications or infection. The recipients were sacrificed at 28 days after surgery and the grafts were evaluated. On bronchoscopy, all of the fresh xenograft group animals showed ischemic and necrotic changes at 28 days after trachea replacement. The allograft rabbits and the tissue-engineered rabbits showed mild mucosal granulation. The levels of interleukin-2 and interferon-γ in the fresh xenograft group were higher than in other groups. Histopathologic examination of the graft in the fresh xenograft rabbits showed ischemic and necrotic changes, including a loss of epithelium, mucosal granulation, and necrosis of cartilaginous rings. The pig-to-rabbit xenografts showed more severe acute rejection within a month than the rabbits with allograft or artificial trachea-mimetic graft. In addition, the artificial tracheal scaffold used in the present experiment is superior to fresh xenograft and may facilitate tracheal reconstruction in the clinical setting.

Phototherapy suppresses inflammation in human nucleus pulposus cells for intervertebral disc degeneration.

The etiology of intervertebral disc (IVD) degeneration accompanied by low back pain (LBP) is largely unknown, and there are no curative therapies. Painful IVD degeneration is associated with infiltrated macrophage-mediated inflammatory response of human nucleus pulposus (NP) cells. The present study aimed to address the hypothesis that pro-inflammatory cytokines derived from macrophages lead to the altered molecular phenotype of human NP cells and to investigate the effects of phototherapy (630, 525, 465 nm with 16, 32, 64 J/cm2) on pain-related cytokine interleukin (IL)-6 and chemokine IL-8 under inflammatory conditions in human NP cells. Human NP cells were treated with soluble factors derived from macrophages in an inflammatory microenvironment, similar to that found in degenerative IVD. Human NP cells were also treated with phototherapy (630, 525, 465 nm with 16, 32, 64 J/cm2), and their cytokine and chemokine levels were detected. The soluble factors caused modulated expression of IL-6, IL-8, and matrix metalloproteinases (MMPs) at the gene and protein levels, causing a shift toward matrix catabolism through the expression of MMPs and increased pain-related factors via preferential activation of the nuclear factor-kappa B (NF-κB) p50 protein. Importantly, phototherapy attenuated the protein and gene expression of pain-related factor IL-6 at all doses and wavelengths. Interestingly, phototherapy also modulated the protein and gene expression of IL-8, which is responsible for the anabolic response, at a wavelength of 465 nm at all doses, in human NP cells. These findings suggested that phototherapy, at an optimal dose and wavelength, might be a useful therapeutic tool to treat IVD degeneration.

Assessment of Polycyclic Aromatic Hydrocarbons in School Playground Soils in Urban Gwangju, South Korea.

Soil samples from school playground of Gwangju City were analyzed for 16 polycyclic aromatic hydrocarbons (PAHs), and the soil contamination status and the potential cancer risk for students and adults were investigated. Soil samples were collected from 57 sites from 5 districts of Gwangju City in the summer of 2013. Regardless of the sampling site, the ∑PAHs concentrations ranged from 13.2 to 145.5 ng/g (mean 51.2 ng/g). Four and five-ring PAHs were predominant in the soil samples while the fraction of two-ring PAHs was the lowest. Seven carcinogenic PAHs contributed ~ 55% of ∑PAHs in school playground soils. The benzo[a]pyrene (46.4%) and dibenz[a,h]anthracene (41.2%) were the major contributors to toxic equivalent quantity. The strong correlation between carcinogenic PAHs suggested that they originated from the same source either vehicular emission or coal combustion, because they are markers of these pollution sources. The mean cancer risk for students (3.61 × 10-7) and adults (8.41 × 10-6) was in the U.S. EPA safety range (< 10-6).

Spine-on-a-chip: Human annulus fibrosus degeneration model for simulating the severity of intervertebral disc degeneration.

The aetiology of intervertebral disc (IVD) degeneration accompanied by low back pain (LBP) is largely unknown, and there are no effective fundamental therapies. Symptomatic IVD is known to be associated with nerve root compression. However, even in the absence of nerve compression, LBP occurs in patients with IVD degeneration. We hypothesize that this phenomenon is associated with a concentration of pro-inflammatory cytokines such as interleukin (IL)-1ß and tumour necrosis factor-alpha (TNF-α), which can lead to altered histologic features and cellular phenotypes observed during IVD degeneration. This study investigated the effects of the concentration of IL-1ß and macrophage derived soluble factor including IL-1ß and TNF-α on the painful response of human annulus fibrosus (AF) cells using a newly developed spine-on-a-chip. Human AF cells were treated with a range of concentrations of IL-1ß and macrophage soluble factors. Our results show that increasing the concentration of inflammatory initiator caused modulated expression of pain-related factors, angiogenesis molecules, and catabolic enzymes. Furthermore, accumulated macrophage derived soluble factors resulted in morphological changes in human AF cells and kinetic alterations such as velocity, dendritic length, cell area, and growth rate, similar to that reported within degenerative IVD. Thus, a better understanding of the relationships between molecular and kinetic alterations can provide fundamental information regarding the pathology of IVD degenerative progression.

Evaluation of Immunosuppressive Therapy Use for Tracheal Transplantation with Trachea-Mimetic Bellows Scaffolds in a Rabbit Model.

The objective of this study was to evaluate the use of immunosuppressive therapy with high-dose cyclosporine, high-dose azathioprine, and a combination of low-dose cyclosporine and azathioprine after tracheal reconstruction by using a trachea-mimetic graft of polycaprolactone (PCL) bellows-type scaffold in a rabbit model. Twenty-four healthy New Zealand white rabbits were used in the study. All underwent circumferential tracheal replacement using tissue-engineered tracheal graft, prepared from PCL bellows scaffold reinforced with silicone ring, collagen hydrogel, and human turbinate mesenchymal stromal cell (hTMSC) sheets. The control group (Group 1) received no medication. The three experimental groups were given daily cyclosporine intramuscular doses of 10 mg/kg (Group 2), azathioprine oral doses of 5 mg/kg (Group 3), and azathioprine oral doses of 2.5 mg/kg plus cyclosporine intramuscular doses of 5 mg/kg (Group 4) for 4 weeks or until death. Group 1 had longer survival times compared to Group 2 or Group 3. Each group except for Group 1 experienced decreases in amount of nutrition and weight loss. In addition, compared with the other groups, Group 2 had significantly increased serum interleukin-2 and interferon-γ levels 7 days after transplantation. The results of this study showed that the administration of cyclosporine and/or azathioprine after tracheal transplantation had no beneficial effects. Furthermore, the administration of cyclosporine had side effects, including extreme weight loss, respiratory distress, and diarrhea. Therefore, cyclosporine and azathioprine avoidance may be recommended for tracheal reconstruction using a native trachea-mimetic graft of PCL bellows-type scaffold in a rabbit model.

Image-Guided Laparoscopic Surgical Tool (IGLaST) Based on the Optical Frequency Domain Imaging (OFDI) to Prevent Bleeding.

We present an image-guided laparoscopic surgical tool (IGLaST) to prevent bleeding. By applying optical frequency domain imaging (OFDI) to a specially designed laparoscopic surgical tool, the inside of fatty tissue can be observed before a resection, and the presence and size of blood vessels can be recognized. The optical sensing module on the IGLaST head has a diameter of less than 390 µm and is moved back and forth by a linear servo actuator in the IGLaST body. We proved the feasibility of IGLaST by in vivo imaging inside the fatty tissue of a porcine model. A blood vessel with a diameter of about 2.2 mm was clearly observed. Our proposed scheme can contribute to safe surgery without bleeding by monitoring vessels inside the tissue and can be further expanded to detect invisible nerves of the laparoscopic thyroid during prostate gland surgery.

Human turbinate mesenchymal stromal cell sheets with bellows graft for rapid tracheal epithelial regeneration.

Rapid functional epithelial regeneration on the luminal surface is essential when using artificial tracheal grafts to repair tracheal defects. In this study, we imposed human turbinate mesenchymal stromal cell (hTMSC) sheets for tracheal epithelial regeneration, and then assessed their potential as a new clinical cell source. In vitro, hTMSCs sheets showed high capacity to differentiate into tracheal epithelium. We fabricated a poly(ε-caprolactone) (PCL) tracheal graft by indirect three-dimensional (3D) printing technique and created a composite construct by transplanting the hTMSC sheets to its luminal surface of the tracheal graft, then applied this tissue-engineered tracheal graft to non-circumferential tracheal reconstruction in a rabbit model. 4 weeks after implantation, the luminal surface of tissue-engineered tracheal graft was covered by a mature and highly-ciliated epithelium, whereas tracheal grafts without hTMSC sheets were covered by only a thin, immature epithelium. Therefore, hTMSC sheets on the luminal surface of a tissue-engineered tracheal graft can accelerate the tracheal epithelial regeneration, and the tissue-engineered tracheal graft with hTMSC sheets provides a useful clinical alternative for tracheal epithelial regeneration.

Stabilization of As-, Pb-, and Cu-contaminated soil using calcined oyster shells and steel slag.

In this study, As-, Pb-, and Cu-contaminated soil was stabilized using calcined oyster shells (COS) and steel slag (SS). The As-contaminated soil was obtained from a timber mill site where chromate copper arsenate (CCA) was used as a preservative. On the other hand, Pb- and Cu-contaminated soil was obtained from a firing range. These two soils were thoroughly mixed to represent As-, Pb-, and Cu-contaminated soil. Calcined oyster shells were obtained by treating waste oyster shells at a high temperature using the calcination process. The effectiveness of stabilization was evaluated by 1-N HCl extraction for As and 0.1-N HCl extraction for Pb and Cu. The treatment results showed that As, Pb, and Cu leachability were significantly reduced upon the combination treatment of COS and SS. The sole treatment of SS (10 wt%) did not show effective stabilization. However, the combination treatment of COS and SS showed a significant reduction in As, Pb, and Cu leachability. The best stabilization results were obtained from the combination treatment of 15 wt% COS and 10 wt% SS. The SEM-EDX results suggested that the effective stabilization of As was most probably achieved by the formation of Ca-As and Fe-As precipitates. In the case of Pb and Cu, stabilization was most probably associated with the formation of pozzolanic reaction products such as CSHs and CAHs.

Development of a 3D bellows tracheal graft: mechanical behavior analysis, fabrication and an in vivo feasibility study.

Artificial tracheal grafts should have not only enough compressive strength to maintain an open tracheal lumen, but also sufficient flexibility for stable mechanical behavior, similar to the native trachea at the implant site. In this study, we developed a new 3D artificial tracheal graft using a bellows design for considering its mechanical behavior. To investigate the mechanical behavior of the bellows structure, finite element method (FEM) analysis in terms of longitudinal tension/compression, bending and radial compression was conducted. The bellows structure was then compared with the cylinder structure generally used for artificial tracheal grafts. The FEM analysis showed that the bellows had outstanding flexibility in longitudinal tension/compression and bending. Moreover, the bellows kept the lumen open without severe luminal deformation in comparison with the cylinder structure. A three-dimensional artificial tracheal graft with a bellows design was fabricated using indirect solid freeform fabrication technology, and the actual mechanical test was conducted to investigate the actual mechanical behavior of the bellows graft. The fabricated bellows graft was then applied to segmental tracheal reconstruction in a rabbit model to assess its applicability. The bellows graft was completely incorporated into newly regenerated connective tissue and no obstruction at the implanted site was observed for up to 8 weeks after implantation. The data suggested that the developed bellows tracheal graft could be a promising alternative for tracheal reconstruction.

Human inferior turbinate: an alternative tissue source of multipotent mesenchymal stromal cells.

OBJECTIVE: Mesenchymal stromal cells (MSCs) are multipotent progenitor cells in adult tissues. Current challenges for the clinical application of MSCs include donor site morbidity, which underscores the need to identify alternative sources of MSCs. This study aimed to explore potential new sources of multipotent MSCs for use in tissue regeneration and the functional restoration of organs. STUDY DESIGN: Mixed methods research. SETTING: Tertiary care center. SUBJECTS AND METHODS: The authors isolated MSCs from human inferior turbinate tissues discarded during turbinate surgery of 10 patients for nasal obstruction. The expression of surface markers for MSCs was assessed by fluorescence-activated cell sorting. The differentiation potential of human turbinate mesenchymal stromal cells (hTMSCs) was analyzed by immunohistochemistry, reverse transcriptase-polymerase chain reaction, and Western blot analysis. RESULTS: Surface epitope analysis revealed that hTMSCs were negative for CD14, CD19, CD34, and HLA-DR and positive for CD29, CD73, and CD90, representing a characteristic phenotype of MSCs. Extracellular matrices with characteristics of cartilage, bone, and adipose tissue were produced by inducing the chondrogenic, osteogenic, and adipogenic differentiation of hTMSCs, respectively. The expression of neuron-specific markers in hTMSCs was confirmed immunocytochemically. CONCLUSION: The hTMSCs represent a new source of multipotent MSCs that are potentially applicable to tissue engineering and regenerative medicine. The availability of differentiated adult cells will allow the development of an effective tissue regeneration method.