Conserved Pseudoknots in lncRNA MEG3 Are Essential for Stimulation of the p53 Pathway.

Long non-coding RNAs (lncRNAs) are key regulatory molecules, but unlike with other RNAs, the direct link between their tertiary structure motifs and their function has proven elusive. Here we report structural and functional studies of human maternally expressed gene 3 (MEG3), a tumor suppressor lncRNA that modulates the p53 response. We found that, in an evolutionary conserved region of MEG3, two distal motifs interact by base complementarity to form alternative, mutually exclusive pseudoknot structures ("kissing loops"). Mutations that disrupt these interactions impair MEG3-dependent p53 stimulation in vivo and disrupt MEG3 folding in vitro. These findings provide mechanistic insights into regulation of the p53 pathway by MEG3 and reveal how conserved motifs of tertiary structure can regulate lncRNA biological function.

Low phosphate activates STOP1-ALMT1 to rapidly inhibit root cell elongation.

Environmental cues profoundly modulate cell proliferation and cell elongation to inform and direct plant growth and development. External phosphate (Pi) limitation inhibits primary root growth in many plant species. However, the underlying Pi sensory mechanisms are unknown. Here we genetically uncouple two Pi sensing pathways in the root apex of Arabidopsis thaliana. First, the rapid inhibition of cell elongation in the transition zone is controlled by transcription factor STOP1, by its direct target, ALMT1, encoding a malate channel, and by ferroxidase LPR1, which together mediate Fe and peroxidase-dependent cell wall stiffening. Second, during the subsequent slow inhibition of cell proliferation in the apical meristem, which is mediated by LPR1-dependent, but largely STOP1-ALMT1-independent, Fe and callose accumulate in the stem cell niche, leading to meristem reduction. Our work uncovers STOP1 and ALMT1 as a signalling pathway of low Pi availability and exuded malate as an unexpected apoplastic inhibitor of root cell wall expansion.

Conditions to minimize soft single biomolecule deformation when imaging with atomic force microscopy.

A recurrent interrogation when imaging soft biomolecules using atomic force microscopy (AFM) is the putative deformation of molecules leading to a bias in recording true topographical surfaces. Deformation of biomolecules comes from three sources: sample instability, adsorption to the imaging substrate, and crushing under tip pressure. To disentangle these causes, we measured the maximum height of a well-known biomolecule, the tobacco mosaic virus (TMV), under eight different experimental conditions positing that the maximum height value is a specific indicator of sample deformations. Six basic AFM experimental factors were tested: imaging in air (AIR) versus in liquid (LIQ), imaging with flat minerals (MICA) versus flat organic surfaces (self-assembled monolayers, SAM), and imaging forces with oscillating tapping mode (TAP) versus PeakForce tapping (PFT). The results show that the most critical parameter in accurately measuring the height of TMV in air is the substrate. In a liquid environment, regardless of the substrate, the most critical parameter is the imaging mode. Most importantly, the expected TMV height values were obtained with both imaging with the PeakForce tapping mode either in liquid or in air at the condition of using self-assembled monolayers as substrate. This study unambiguously explains previous poor results of imaging biomolecules on mica in air and suggests alternative methodologies for depositing soft biomolecules on well organized self-assembled monolayers.

Combined small angle X-ray solution scattering with atomic force microscopy for characterizing radiation damage on biological macromolecules.

BACKGROUND: Synchrotron radiation facilities are pillars of modern structural biology. Small-Angle X-ray scattering performed at synchrotron sources is often used to characterize the shape of biological macromolecules. A major challenge with high-energy X-ray beam on such macromolecules is the perturbation of sample due to radiation damage. RESULTS: By employing atomic force microscopy, another common technique to determine the shape of biological macromolecules when deposited on flat substrates, we present a protocol to evaluate and characterize consequences of radiation damage. It requires the acquisition of images of irradiated samples at the single molecule level in a timely manner while using minimal amounts of protein. The protocol has been tested on two different molecular systems: a large globular tetremeric enzyme (ß-Amylase) and a rod-shape plant virus (tobacco mosaic virus). Radiation damage on the globular enzyme leads to an apparent increase in molecular sizes whereas the effect on the long virus is a breakage into smaller pieces resulting in a decrease of the average long-axis radius. CONCLUSIONS: These results show that radiation damage can appear in different forms and strongly support the need to check the effect of radiation damage at synchrotron sources using the presented protocol.

Atomic force microscope, molecular imaging, and analysis.

Image visibility is a central issue in analyzing all kinds of microscopic images. An increase of intensity contrast helps to raise the image visibility, thereby to reveal fine image features. Accordingly, a proper evaluation of results with current imaging parameters can be used for feedback on future imaging experiments. In this work, we have applied the Laplacian function of image intensity as either an additive component (Laplacian mask) or a multiplying factor (Laplacian weight) for enhancing image contrast of high-resolution AFM images of two molecular systems, an unknown protein imaged in air, provided by AFM COST Action TD1002 (http://www.afm4nanomedbio.eu/), and tobacco mosaic virus (TMV) particles imaged in liquid. Based on both visual inspection and quantitative representation of contrast measurements, we found that the Laplacian weight is more effective than the Laplacian mask for the unknown protein, whereas for the TMV system the strengthened Laplacian mask is superior to the Laplacian weight. The present results indicate that a mathematical function, as exemplified by the Laplacian function, may yield varied processing effects with different operations. To interpret the diversity of molecular structure and topology in images, an explicit expression for processing procedures should be included in scientific reports alongside instrumental setups.

Virus particle assembly into crystalline domains enabled by the coffee ring effect.

Tobacco mosaic virus particles can be rapidly assembled into 3D-domains by capillary flow-driven alignment at the triple contact-line of an evaporating droplet. Virus particles of ∼150 Šdiameter can be resolved within individual domains at the outer rim of the "coffee-ring" type residue by atomic force microscopy. The crystalline domains can also be probed by X-ray microdiffraction techniques. Both techniques reveal that the rod-like virus particles are oriented parallel to the rim. We further demonstrate the feasibility of collection of hk0 reflection intensities in GISAXS geometry and show it allows calculating a low-resolution electron density projection along the rod axis.

The sodium/iodide symporter: state of the art of its molecular characterization.

The sodium/iodide symporter (NIS or SLC5A5) is an intrinsic membrane protein implicated in iodide uptake into thyroid follicular cells. It plays a crucial role in iodine metabolism and thyroid regulation and its function is widely exploited in the diagnosis and treatment of benign and malignant thyroid diseases. A great effort is currently being made to develop a NIS-based gene therapy also allowing the radiotreatment of nonthyroidal tumors. NIS is also expressed in other tissues, such as salivary gland, stomach and mammary gland during lactation, where its physiological role remains unclear. The molecular identity of the thyroid iodide transporter was elucidated approximately fifteen years ago. It belongs to the superfamily of sodium/solute symporters, SSS (and to the human transporter family, SLC5), and is composed of 13 transmembrane helices and 643 amino acid residues in humans. Knowledge concerning NIS structure/function relationship has been obtained by taking advantage of the high resolution structure of one member of the SSS family, the Vibrio parahaemolyticus sodium/galactose symporter (vSGLT), and from studies of gene mutations leading to congenital iodine transport defects (ITD). This review will summarize current knowledge regarding the molecular characterization of NIS.

Nanoscale structural features determined by AFM for single virus particles.

In this work, we propose "single-image analysis", as opposed to multi-image averaging, for extracting valuable information from AFM images of single bio-particles. This approach allows us to study molecular systems imaged by AFM under general circumstances without restrictions on their structural forms. As feature exhibition is a resolution correlation, we have performed AFM imaging on surfaces of tobacco mosaic virus (TMV) to demonstrate variations of structural patterns with probing resolution. Two AFM images were acquired with the same tip at different probing resolutions in terms of pixel width, i.e., 1.95 and 0.49 nm per pixel. For assessment, we have constructed an in silico topograph based on the three-dimensional crystal structure of TMV as a reference. The prominent artifacts observed in the AFM-determined shape of TMV were attributed to tip convolutions. The width of TMV rod was systematically overestimated by ~10 nm at both probing resolutions of AFM. Nevertheless, the effects of tip convolution were less severe in vertical orientation so that the estimated height of TMV by AFM imaging was in close agreement with the in silico X-ray topograph. Using dedicated image processing algorithms, we found that at low resolution (i.e., 1.95 nm per pixel), the extracted surface features of TMV can be interpreted as a partial or full helical repeat (three complete turns with ~7.0 nm in length), while individual protein subunits (~2.5 nm) were perceivable only at high resolution. The present study shows that the scales of revealed structural features in AFM images are subject to both probing resolution and processing algorithms for image analysis.

Is the coexistence of thromboembolic events and Factor VII deficiency fortuitous?

Over 30 thromboembolic events have been reported in factor VII (FVII) deficiency either associated with previously asymptomatic forms or bleeding diathesis. Whether this coexistence is fortuitous or not is still a mater of debate. Nevertheless, it is well admitted that (i) thrombotic events occurring in FVII-deficient patients with any apparent triggering factors are very rare, (ii) surgical procedures, replacement therapy (especially containing activated factors) but also the presence of an antiphospholipid syndrome are frequently associated with these particular thrombotic events, (iii) in the same way, R304Q and A294V FVII variants appear to be more prevalent than other FVII equally frequent mutations and finally (iv) low FVII coagulant activity levels do not protect against thrombosis. Therefore, peri-operative thrombotic prophylaxis should be relevant for these particular FVII-deficient patients. However, safety, treatment modalities and specific indications of such an antithrombotic prophylaxis remain to be established.

Computational reconstruction of multidomain proteins using atomic force microscopy data.

Classical structural biology techniques face a great challenge to determine the structure at the atomic level of large and flexible macromolecules. We present a novel methodology that combines high-resolution AFM topographic images with atomic coordinates of proteins to assemble very large macromolecules or particles. Our method uses a two-step protocol: atomic coordinates of individual domains are docked beneath the molecular surface of the large macromolecule, and then each domain is assembled using a combinatorial search. The protocol was validated on three test cases: a simulated system of antibody structures; and two experimentally based test cases: Tobacco mosaic virus, a rod-shaped virus; and Aquaporin Z, a bacterial membrane protein. We have shown that AFM-intermediate resolution topography and partial surface data are useful constraints for building macromolecular assemblies. The protocol is applicable to multicomponent structures connected in the polypeptide chain or as disjoint molecules. The approach effectively increases the resolution of AFM beyond topographical information down to atomic-detail structures.

Tobacco mosaic virus as an AFM tip calibrator.

The study of high-resolution topographic surfaces of isolated single molecules is one of the applications of atomic force microscopy (AFM). Since tip-induced distortions are significant in topographic images the exact AFM tip shape must be known in order to correct dilated AFM height images using mathematical morphology operators. In this work, we present a protocol to estimate the AFM tip apex radius using tobacco mosaic virus (TMV) particles. Among the many advantages of TMV, are its non-abrasivity, thermal stability, bio-compatibility with other isolated single molecules and stability when deposited on divalent ion pretreated mica. Compared to previous calibration systems, the advantage of using TMV resides in our detailed knowledge of the atomic structure of the entire rod-shaped particle. This property makes it possible to interpret AFM height images in term of the three-dimensional structure of TMV. Results obtained in this study show that when a low imaging force is used, the tip is sensing viral protein loops whereas at higher imaging force the tip is sensing the TMV particle core. The known size of the TMV particle allowed us to develop a tip-size estimation protocol which permits the successful erosion of tip-convoluted AFM height images. Our data shows that the TMV particle is a well-adapted calibrator for AFM tips for imaging single isolated biomolecules. The procedure developed in this study is easily applicable to any other spherical viral particles.

Structure-activity relationships in peptide-antibody complexes: implications for epitope prediction and development of synthetic peptide vaccines.

Interaction modes and molecular surface properties for both peptide- and protein-antibody complexes have been investigated. Datasets were constituted from the IMGT database and consisted of 37 peptide-antibody (PEPT) and 155 protein-antibody (PROT) complexes. A computer approach was developed to analyze the surface of peptides and proteins using a level set method which allows the characterization of shape complementarity using surface curvature. We found that in both datasets, the interacting surfaces of the two binding partners, exhibited a moderate degree of shape complementarity at the molecular level but not at the atomic level. We also evaluated the structural similarity between peptides bound to antibodies and the corresponding regions in the 3D structures of the cognate proteins. We found that no more than 25% of Phipsi; dihedral angles were conserved between the corresponding regions in peptides and proteins. We also superimposed the parent protein structure onto that of the bound peptides and visually looked for the presence of bumps or clashes between the cognate protein and the antibody. Except for antibodies possessing neutralizing activity and for those bound to a peptide longer than 30 residues, no superimposition in peptide-antibody complexes was found to be bump or clash-free. These findings indicate that studies restricted to continuous epitopes are unlikely to provide the information needed to design short linear peptides that could be expected to mimic satisfactorily the discontinuous epitopes of native proteins and be successful as synthetic vaccines.

Multi-template approach to modeling engineered disulfide bonds.

The key issue for disulfide bond engineering is to select the most appropriate location in the protein. By surveying the structure of experimentally engineered disulfide bonds, we found about half of them that have geometry incompatible with any native disulfide bond geometry. To improve the current prediction methods that tend to apply either ideal geometrical or energetical criteria to single three-dimensional structures, we have combined a novel computational protocol with the usage of multiple protein structures to take into account protein backbone flexibility. The multiple structures can be selected from either independently determined crystal structures for identical proteins, models of nuclear magnetic resonance experiments, or crystal structures of homology-related proteins. We have validated our approach by comparing the predictions with known disulfide bonds. The accuracy of prediction for native disulfide bonds reaches 99.6%. In a more stringent test on the reported engineered disulfide bonds, we have obtained a success rate of 93%. Our protocol also determines the oxido-reduction state of a predicted disulfide bond and the corresponding mutational cost. From the energy ranking, the user can easily choose top predicted sites for mutagenesis experiments. Our method provides information about local stability of the engineered disulfide bond surroundings.

Deciphering structure and topology of conserved COG2042 orphan proteins.

BACKGROUND: The cluster of orthologous group COG2042 has members in all sequenced Eukaryota as well as in many Archaea. The cellular function of these proteins of ancient origin remains unknown. PSI-BLAST analysis does not indicate a possible link with even remotely-related proteins that have been functionally or structurally characterized. As a prototype among COG2042 orthologs, SSO0551 protein from the hyperthermophilic archaeon Sulfolobus solfataricus was purified to homogeneity for biophysical characterization. RESULTS: The untagged protein is thermostable and behaves as a monomeric protein in gel filtration experiment. Several mass spectrometry-based strategies were combined to obtain a set of low resolution structural information. Kinetic data from limited proteolysis with various endoproteases are concordant in pointing out that region Glu73-Arg78 is hyper-sensitive, and thus accessible and flexible. Lysine labeling with NHS-biotin and cross-linking with DTSSP revealed that the 35 amino acid RLI motif at the N terminus is solvent exposed. Cross-links between Lys10-Lys14 and Lys23-Lys25 indicate that these residues are spatially close and in adequate conformation to be cross-linked. These experimental data have been used to rank multiple three-dimensional models generated by a de novo procedure. CONCLUSION: Our data indicate that COG2042 proteins may share a novel fold. Combining biophysical, mass-spectrometry data and molecular model is a useful strategy to obtain structural information and to help in prioritizing targets in structural genomics programs.

Two distinct binding sites for high potential iron-sulfur protein and cytochrome c on the reaction center-bound cytochrome of Rubrivivax gelatinosus.

The photosynthetic cyclic electron transfer of the purple bacterium Rubrivivax gelatinosus, involving the cytochrome bc(1) complex and the reaction center, can be carried out via two pathways. A high potential iron-sulfur protein (HiPIP) acts as the in vivo periplasmic electron donor to the reaction center (RC)-bound cytochrome when cells are grown under anaerobic conditions in the light, while cytochrome c is the soluble electron carrier for cells grown under (8)aerobic conditions in the dark. A spontaneous reversion of R. gelatinosus C244, a defective mutant in synthesis of the RC-bound cytochrome by insertion of a Km(r) cassette leading to gene disruption with a slow growth rate, restores the normal photosynthetic growth. This revertant, designated C244-P1, lost the Km(r) cassette but synthesized a RC-bound cytochrome with an external 77-amino acid insertion derived from the cassette. We characterized the RC-bound cytochrome of this mutant by EPR, time-resolved optical spectroscopy, and structural analysis. We also investigated the in vivo electron transfer rates between the two soluble electron donors and this RC-bound cytochrome. Our results demonstrated that the C244-P1 RC-bound cytochrome is still able to receive electrons from HiPIP, but it is no longer reducible by cytochrome c(8). Combining these experimental and theoretical protein-protein docking results, we conclude that cytochrome c(8) and HiPIP bind the RC-bound cytochrome at two distinct but partially overlapping sites.

Identification, purification, and characterization of an eukaryotic-like phosphopantetheine adenylyltransferase (coenzyme A biosynthetic pathway) in the hyperthermophilic archaeon Pyrococcus abyssi.

Although coenzymeA (CoA) is essential in numerous metabolic pathways in all living cells, molecular characterization of the CoA biosynthetic pathway in Archaea remains undocumented. Archaeal genomes contain detectable homologues for only three of the five steps of the CoA biosynthetic pathway characterized in Eukarya and Bacteria. In case of phosphopantetheine adenylyltransferase (PPAT) (EC 2.7.7.3), the putative archaeal enzyme exhibits significant sequence similarity only with its eukaryotic homologs, an unusual situation for a protein involved in a central metabolic pathway. We have overexpressed in Escherichia coli, purified, and characterized this putative PPAT from the hyperthermophilic archaeon Pyrococcus abyssi (PAB0944). Matrix-assisted laser desorption ionization-time of flight mass spectrometry and high performance liquid chromatography measurements are consistent with the presence of a dephospho-CoA (dPCoA) molecule tightly bound to the polypeptide. The protein indeed catalyzes the synthesis of dPCoA from 4'-phosphopantetheine and ATP, as well as the reverse reaction. The presence of dPCoA stabilizes PAB0944, as it induces a shift from 76 to 82 degrees C of the apparent Tm measured by differential scanning microcalorimetry. Potassium glutamate was found to stabilize the protein at 400 mm. The enzyme behaves as a monomeric protein. Although only distantly related, secondary structure prediction indicates that archaeal and eukaryal PPAT belong to the same nucleotidyltransferase superfamily of bacterial PPAT. The existence of operational proteins highly conserved between Archaea and Eukarya involved in a central metabolic pathway challenge evolutionary scenarios in which eukaryal operational proteins are strictly of bacterial origin.

BEPITOPE: predicting the location of continuous epitopes and patterns in proteins.

In growing need of obtaining highly specific monoclonal antibodies against novel proteins, we developed new functions implemented in the program BEPITOPE to predict continuous protein epitopes. This program not only can compute, combine, display and print prediction profiles, but also provides a list of suggested linear peptides to be synthesized. Novel facilities incorporated in BEPITOPE include the treatment of a whole genome, the search for a user-defined pattern, and the combination of prediction to pattern profiles. This latter approach is useful to remove unwanted predictions such as those including glycosylation sites.

Functional characterization of an anti-estradiol antibody by site-directed mutagenesis and molecular modelling: modulation of binding properties and prominent role of the V(L) domain in estradiol recognition.

The high-affinity monoclonal anti-estradiol antibody 9D3 presents a specificity defect towards estradiol-3-sulphate and 3-glucuronide conjugates incompatible with use in direct immunoassays. The corresponding single-chain variable fragment (scFv), cloned and produced in E. coli, exhibited a 10-fold lower affinity for estradiol (K(a)=1.2 x 10(9) M (-1)) and a slightly increased specificity defect for the 3-position. Site-directed mutagenesis revealed critical residues involved in estradiol recognition and produced mutants exhibiting up to a 3-fold increase of the binding affinity for estradiol and up to a 2-fold decrease of the cross-reactivity with estradiol-3-sulphate. A comparative model of the antibody 9D3-estradiol complex was built in which the estradiol D-ring is buried into the binding pocket while the 3-, 6- and 7-positions are solvent exposed, agreeing with the lack of specificity for these three positions. Two potential alternative orientations of the A-ring, one close to CDR H3 and L2 loops, and the other one close to CDR H2 and L3 loops, have been considered for the docking of estradiol, none of which could be unambiguously privileged taking into account data from cross-reactivity measurements, photolabelling and mutagenesis studies. For both orientations, estradiol is stabilized by hydrogen bonding of the 17beta-OH group with TyrL36, His89 and GlnH35 in the first case, or TyrL36, only, in the second case and by van der Waals contacts from TyrL91 with alpha- or beta-face of estradiol, respectively, and from ValH95 and GlyH97 with the opposite face. To elucidate the molecular basis of antibody 9D3 specificity, as compared with that of another anti-estradiol antibody 15H11, single variable domains (V(H) and V(L)) and scFv hybrids have been constructed. The binding activity of V(L)9D3 as well as the specificity of the V(L)9D3/V(H)15H11 hybrid, both similar to antibody 9D3, revealed a prominent role of V(L) in estradiol recognition. These findings establish premises for antibody engineering to reduce cross-reactivity, especially with estradiol-3-conjugates.