Purification of arsenic-contaminated water using iron molybdate filters and monitoring of their genotoxic, mutagenic, and cytotoxic effects through bioassays.

Environmental contamination has been a cause of concern worldwide, being aggravated by anthropogenic activities carried out without the correct disposal of toxic products in the various habitats on our planet. In Brazil, mining companies are responsible for the contamination of large river basins with toxic elements from mining activities. Among these elements, arsenic draws attention because it is highly carcinogenic and found in waters in concentrations above those recommended by regulatory agencies. Here, Fe2(MoO4)3 nanoparticles are synthesized and used as a filter medium in water purification systems contaminated with arsenic. The adsorption kinetics of arsenic by Fe2(MoO4)3 nanoparticles is fast, showing pseudo-second-order rate constants of 0.0044, 0.0080, and 0.0106 g mg-1 min-1 for As3+, As5+, and MMA, respectively. The adsorption isotherms are better adjusted with the Langmuir and Redlich-Peterson models, indicating that the arsenic adsorption occurs in monolayers on the Fe2(MoO4)3 surface. The Fe2(MoO4)3 adsorption capacities determined for the As3+, As5+, and MMA species are 16.1, 23.1, and 23.5 mg g-1, respectively. The Fe2(MoO4)3 filter is efficient in purifying arsenic-contaminated water, reducing its initial concentration from 1000 µg L-1 to levels close to zero. Biological tests indicate that Fe2(MoO4)3 nanoparticles and filtered water have no cytotoxic, genotoxic, and mutagenic risks to human life. Those results suggest that the Fe2(MoO4)3 filter can be used as an efficient and safe technology for the purification of water contaminated by arsenic.

Gold-Coated Superparamagnetic Iron Oxide Nanoparticles Attenuate Collagen-Induced Arthritis after Magnetic Targeting.

The aim of the study was to evaluate if gold-coated superparamagnetic iron oxide nanoparticles (AuSPION) magnetic-targeted to the arthritic articulation of collagen induced arthritis (CIA) rats are able to ameliorate rheumatoid arthritis without producing significant biological adverse effects in comparison to colloidal Au nanoparticles (AuC) and metotrexate (MTX). Male Wistar rats were divided into control; arthritic; AuSPION (150 µg kg-1); AuC (150 µg kg-1) and MTX (2.5 µg kg-1). Treatments were administered thrice every other day by the intraperitoneal route 15 min after all groups had a neodymium magnet coupled to the right ankle joint (kept for 1 h). Paw edema and body weight were measured weekly. Joint sections were evaluated by Haematoxylin & Eosin and immunohistochemistry (TNF-α, IL-1ß). Biomarkers of oxidative stress were used to evaluate toxicity. Among the evaluated treatments, AuSPION led to significant clinical improvements (decreased edema and infiltration by leukocytes as well as less positively immunostained cells for both TNF-α and IL-1ß in synovium) accompanied by a lack of toxicity as indicated by redox state and genotoxicity assays. Our results clearly indicate that the magnetic targeting of AuSPION suppresses joint edema and inflammation, cytokine expression as well as the redox imbalance, thereby contributing to an amelioration of arthritis severity in CIA rats. The results demonstrate for the first time the potentiality of AuSPION administration under a magnetic field as an attractive alternative for future treatments of rheumatic diseases.

Simple synthesis and characterization of l-Cystine functionalized δ-FeOOH for highly efficient Hg(II) removal from contamined water and mining waste.

l-Cystine functionalized δ-FeOOH nanoparticles (Cys-δ-FeOOH) were prepared by a cheap and straightforward method for using as an adsorbent of Hg(II) in aqueous solution. X-ray diffraction (XRD), attenuated total reflectance infrared spectroscopy (ATR-IR), and Raman spectroscopy confirmed that Cys-δ-FeOOH was successfully synthesized. Cys-δ-FeOOH with 14 nm crystal size, 34 m2 g-1 surface area, and 9 nm pore size were produced. The functionalization of the δ-FeOOH surface with cysteine decreases the point of zero charge of the iron oxyhydroxide from 8.4 in δ-FeOOH to 5.7 in Cys-δ-FeOOH, which is beneficial for the adsorption of Hg(II) near neutral pH. The maximum Hg(II) adsorption capacity of the δ-FeOOH and Cys-δ-FeOOH at pH 7 were found to be 35 mg g-1 and 217 mg g-1, respectively. The kinetics data were best fitted by a pseudo-second-order model, suggesting chemical adsorption on the surface and pores of Cys-δ-FeOOH nanoparticles. Finally, δ-FeOOH and Cys-δ-FeOOH filters were constructed for purifying mercury-contaminated water. The filters were highly efficient to treat mercury-contaminated water from a Brazilian river, reducing the concentration of mercury in water to values below the allowed limits by the current legislation.

Magnetic iron species highly dispersed over silica: use as catalysts for removal of pollutants in water.

Fe2O3-SiO2 composites were prepared by impregnation (sample FeIMP) or doping (sample FeDOP) in the structure of porous silica. The dye removal capacity of the materials was investigated through adsorption and oxidation studies of methylene blue and rhodamine B. N2 adsorption/desorption measurements on FeIMP and FeDOP resulted in specific areas of 27 and 235 m2 g-1, respectively. Mössbauer spectroscopy and XRD data detected hematite and maghemite as the iron phases in the samples FeIMP and FeDOP, respectively. Adsorption isotherms and kinetic studies of the dyes were better fitted in DKR model for FeDOP, where the process follows a pseudo-second order with the interparticle diffusion step being the rate-limiting step. On the other hand, FeIMP has better fit in the Langmuir model. Photocatalytic activity was observed in FeDOP under UV irradiation by the presence of reaction-hydroxylated intermediates for MB (m/z = 301) and RhB (m/z = 459). However, the photocatalytic activity was strongly influenced by the adsorption affinity between dye/catalyst. Photogenerated holes are the species responsible for the dye degradation when the adsorption is too strong, while hydroxyl radical action will be favored when the adsorption is not vigorous as detected by ESI-MS. Graphical Abstract Action of photogenerated holes and free electrons into the photocatalytically mechanism of methylene blue degradation over a semiconductor.

Current Status of Magnetite-Based Core@Shell Structures for Diagnosis and Therapy in Oncology Short running title: Biomedical Applications of Magnetite@Shell Structures.

Superparamagnetic iron oxides, as magnetite (Fe3O4) or maghemite (γ-Fe2O3), are primary materials with intrinsic properties that enable them, as single components or as special composites, to base advanced techniques in medical clinical practices, as a contrast agent in magnetic resonance imaging (MRI), as magnetically-induced hyperthermic heat generator, and as a magnetic guide to locally deliver drugs to specific sites in the human body. An interesting approach to developing nanoplatforms for those applications consists in manufacturing core@shell nanostructures, in which the precursor magnetic iron oxide (usually, magnetite) acts as a core, and an organic, or inorganic compound is used as a shell in a multifunctional composite. In this review, we report the current advances in the use of magnetite-based core@shell nanostructures, including Fe3O4@SiO2 and Fe3O4@polymers, in MRI, magnetic hyperthermia and drug delivery systems for diagnosis and therapy of tumor cells. The development of nanoplatforms for combined therapy and diagnostic (theranostic) is also addressed.