Self-standing, conducting and capacitive biomimetic hybrid nanomembranes for selective molecular ion separation.

Hybrid free-standing biomimetic materials are developed by integrating the VDAC36 ß-barrel protein into robust and flexible three-layered polymer nanomembranes. The first and third layers are prepared by spin-coating a mixture of poly(lactic acid) (PLA) and poly(vinyl alcohol) (PVA). PVA nanofeatures are transformed into controlled nanoperforations by solvent-etching. The two nanoperforated PLA layers are separated by an electroactive layer, which is successfully electropolymerized by introducing a conducting sacrificial substrate under the first PLA nanosheet. Finally, the nanomaterial is consolidated by immobilizing the VDAC36 protein, active as an ion channel, into the nanoperforations of the upper layer. The integration of the protein causes a significant reduction of the material resistance, which decreases from 21.9 to 3.9 kΩ cm2. Electrochemical impedance spectroscopy studies using inorganic ions and molecular metabolites (i.e.l-lysine and ATP) not only reveal that the hybrid films behave as electrochemical supercapacitors but also indicate the most appropriate conditions to obtain selective responses against molecular ions as a function of their charge. The combination of polymers and proteins is promising for the development of new devices for engineering, biotechnological and biomedical applications.

Structural and functional characterization of Solanum tuberosum VDAC36.

As it forms water-filled channel in the mitochondria outer membrane and diffuses essential metabolites such as NADH and ATP, the voltage-dependent anion channel (VDAC) protein family plays a central role in all eukaryotic cells. In comparison with their mammalian homologues, little is known about the structural and functional properties of plant VDACs. In the present contribution, one of the two VDACs isoforms of Solanum tuberosum, stVDAC36, has been successfully overexpressed and refolded by an in-house method, as demonstrated by the information on its secondary and tertiary structure gathered from circular dichroism and intrinsic fluorescence. Cross-linking and molecular modeling studies have evidenced the presence of dimers and tetramers, and they suggest the formation of an intermolecular disulfide bond between two stVDAC36 monomers. The pore-forming activity was also assessed by liposome swelling assays, indicating a typical pore diameter between 2.0 and 2.7 nm. Finally, insights about the ATP binding inside the pore are given by docking studies and electrostatic calculations.

Peptide-surfactant interactions: A combined spectroscopic and molecular dynamics simulation approach.

In the present contribution, we report a combined spectroscopic and computational approach aiming to unravel at atomic resolution the effect of the anionic SDS detergent on the structure of two model peptides, the α-helix TrpCage and the ß-stranded TrpZip. A detailed characterization of the specific amino acids involved is performed. Monomeric (single molecules) and micellar SDS species differently interact with the α-helix and ß-stranded peptides, emphasizing the different mechanisms occurring below and above the critical aggregation concentration (CAC). Below the CAC, the α-helix peptide is fully unfolded, losing its hydrophobic core and its Asp-Arg salt bridge, while the ß-stranded peptide keeps its native structure with its four Trp well oriented. Above the CAC, the SDS micelles have the same effect on both peptides, that is, destabilizing the tertiary structure while keeping their secondary structure. Our studies will be helpful to deepen our understanding of the action of the denaturant SDS on peptides and proteins.

Polypyrrole-supported membrane proteins for bio-inspired ion channels.

Biomedical platforms constructed by immobilizing membrane proteins in matrixes made of synthetic organic polymers is a challenge because the structure and function of these proteins are affected by environmental conditions. In this work, an operative composite that regulates the diffusion of alkali ions has been prepared by functionalizing a supporting matrix made of poly(N-methylpyrrole) (PNMPy) with a ß-barrel membrane protein (Omp2a) that forms channels and pores. The protein has been unequivocally identified in the composite, and its structure has been shown to remain unaltered. The PNMPy-Omp2a platform fulfills properties typically associated with functional bio-interfaces with biomedical applications (e.g., biocompatibility, biodegrabadility, and hydrophilicity). The functionality of the immobilized protein has been examined by studying the passive ion transport response in the presence of electrolytic solutions with Na(+) and K(+) concentrations close to those found in blood. Although the behavior of PNMPy and PNMPy-Omp2a is very similar for solutions with very low concentration, the resistance of the latter decreases drastically when the concentration of ions increases to ∼100 mM. This reduction reflects an enhanced ion exchange between the biocomposite and the electrolytic medium, which is not observed in PNMPy, evidencing that PNMPy-Omp2a is particularly well suited to prepare bioinspired channels and smart biosensors.

The role of 2-methyl-2, 4-pentanediol in sodium dodecyl sulfate micelle dissociation unveiled by dynamic light scattering and molecular dynamics simulations.

The development of efficient protein refolding techniques remains a challenge in biotechnology. In that context, it has recently been reported that the addition of 2-methyl-2, 4-pentanediol (MPD) to sodium dodecyl sulfate (SDS) allows the renaturation of both soluble and membrane proteins. The present work combines experimental (dynamic light scattering; DLS) and theoretical (molecular dynamics) approaches to study the molecular basis of the association between SDS and MPD, in order to understand its relevance in the refolding process. DLS shows the micelle dissociation in the presence of molar concentrations of MPD, and simulations reveal that this process results from a screening of the negative charge on the SDS headgroup and a minimization of the solvent (water) accessibility of the detergent tail. This suggests a mechanism whereby the combination of these effects leads to the shift from a "harsh" to a "gentle" detergent behavior, which in turn promotes a productive refolding of the protein.

Towards a universal method for protein refolding: the trimeric beta barrel membrane Omp2a as a test case.

It has recently been reported that 2-methyl-2,4-pentanediol (MPD) can modulate the protein-binding properties of sodium dodecyl sulfate (SDS), turning it into a non-denaturing detergent. Indeed both alpha (the lysozyme) and beta (the carbonic anhydrase II) soluble enzymes, as well as a beta membrane protein (PagP) have been successfully refolded into their native form by using this amphiphatic alcohol. In order to support the universal character of our MPD-based technique, we have extended its transferability to the Omp2a trimeric membrane porin. The far-UV circular dichroism signature of Omp2a refolded with our original procedure is identical to that obtained by classical techniques, clearly indicating a proper refolding. Moreover, we show that the optimal SDS/MPD ratio for refolding Omp2a is similar to what has been observed for other types of proteins. While the protocol allows refolding at higher protein concentration (up to 4 mg/mL) and ionic strength (up to 1 M NaCl) than other refolding methods, it is also more efficient at basic pH values and medium temperature (20-40°C). Finally, the key role of the cosolvent was highlighted by a thorough study of the efficiency of MPD analogues, and a high variability was observed, as they can be able or unable to induce refolding at low or high salt concentrations.

Stochastic simulation of structural properties of natively unfolded and denatured proteins.

A new simulation strategy based on a stochastic process has been developed and tested to study the structural properties of the unfolded state of proteins at the atomistic level. The procedure combines a generation algorithm to produce representative uncorrelated atomistic microstructures and an original relaxation method to minimize repulsive non-bonded interactions. Using this methodology, a set of 14 unfolded proteins, including seven natively unfolded proteins as well as seven "classical" proteins experimentally described in denaturation conditions, has been investigated. Comparisons between the calculated and available experimental values of several properties, at hydrodynamic and atomic level, used to describe the unfolded state, such as the radius of gyration, the maximum length, the hydrodynamic radius, the diffusion coefficient, the sedimentation coefficient, and the NMR chemical shifts, reflect a very good agreement. Furthermore, our results indicate that the relationship between the radius of gyration and the hydrodynamic radius deviates from the Zimm's theory of polymer dynamics for random coils, as was recently observed using single-molecule fluorescent methods. Simulations reveal that the interactions between atoms separated by three chemical bonds (1-4 interactions) play a crucial role in the generation process, suggesting that the unfolded state is essentially governed by bonding and short-range non-bonding interactions.

Response of crown ether functionalized polythiophenes to alkaline ions.

The sensing response of 15-crown-5-ether functionalized polythiophene to Li+, Na+, and K+ has been investigated at the atomistic level using molecular dynamics simulations. The stability associated with all the identified binding sites has been corroborated by quantum mechanical calculations. Although the cavity of the macrocycle is not the most visited binding site, such receptor is responsible of the selective sensing response of this polythiophene derivative. PF6(-) counterions reduce the mobility of the alkaline cations, which do not occupy the crown ether cavity of consecutive repeating units due to electrostatic repulsions. Furthermore, the relative entropy for the "free state → bound state" has been estimated using a procedure based on the covariance matrix atom-positional fluctuations. Evaluation of the entropic contributions allow us to complete the thermodynamics scenario of binding process, which was recently initiated by calculating the enthalpies at quantum mechanical level [ Chem. Eur. J. 2009, 15, 4676]. Results indicate an entropycally driven binding preference.

Theoretical Investigation of the Geometries and UV-vis Spectra of Poly(l-glutamic acid) Featuring a Photochromic Azobenzene Side Chain.

The geometries and UV-vis spectra of azobenzene dyes grafted as a side chain on poly(l-glutamic acid) have been investigated using a combination of quantum mechanics/molecular mechanics (QM/MM) and time-dependent density functional theory (TD-DFT) methods at the TD-PBE0/6-311+G(d,p)//B3LYP/6-311G(d,p):Amber ff99 level of theory. The influence of the secondary structure of the polypeptide on the electronic properties of both the trans and cis conformations of azobenzene dyes has been studied. It turns out that the grafted dyes exhibit a red-shift of the π → π* absorption energies mainly due to the auxochromic shift induced by the peptidic group used to link the chromophoric unit to the polypeptide and that specific interactions between the glutamic side chain and the azobenzene moiety lead to a large blue-shift of the n → π* transition.

Assessment of the efficiency of long-range corrected functionals for some properties of large compounds.

Using the long-range correction (LC) density functional theory (DFT) scheme introduced by Iikura et al. [J. Chem. Phys. 115, 3540 (2001)] and the Coulomb-attenuating model (CAM-B3LYP) of Yanai et al. [Chem. Phys. Lett. 393, 51 (2004)], we have calculated a series of properties that are known to be poorly reproduced by standard functionals: Bond length alternation of pi-conjugated polymers, polarizabilities of delocalized chains, and electronic spectra of extended dyes. For each of these properties, we present cases in which traditional hybrid functionals do provide accurate results and cases in which they fail to reproduce the correct trends. The quality of the results is assessed with regard to experimental values and/or data arising from electron-correlated wave function approaches. It turns out that (i) both LC-DFT and CAM-B3LYP provide an accurate bond length alternation for polyacetylene and polymethineimine, although for the latter they decrease slightly too rapidly with chain length. (ii) The LC generalized gradient approximation and MP2 polarizabilities of long polyphosphazene and polymethineimine oligomers agree almost perfectly. In the same way, CAM-B3LYP corrects the major part of the B3LYP faults. (iii) LC and CAM techniques do not help in correcting the nonrealistic evolution with chain length of the absorption wavelengths of cyanine derivatives. In addition, though both schemes significantly overestimate the ground to excited state transition energy of substituted anthraquinone dyes, they provide a more consistent picture once a statistical treatment is performed than do traditional hybrid functionals.

Second-order Møller-Plesset evaluation of the bond length alternation of several series of linear oligomers.

We investigate, at the second-order Møller-Plesset level, the bond length alternation of 30 series of increasingly long linear oligomers for a total of more than 250 compounds, polyacetylene, polymethineimine, polyphosphinoborane, polyaminoborane, polyphosphazene, etc., for which, often for the first time, an accurate estimate of the polymeric bond length alternation is given. The variations induced either by chemical substitution of the backbone atoms or conformational modifications are discussed. Only three polymers present a large bond length alternation (>0.03 A). Systematic basis set effects have been unravelled, i.e., MP2/6-311G(2d) always overshoots the bond length alternation. Best estimates of the bond length alternation are provided for more than a dozen of polymers.

Ab initio assessment of the first hyperpolarizability of saturated and unsaturated polyaminoborane/polyphosphinoborane copolymers.

The linear and nonlinear optical properties of trans-cisoïd saturated and unsaturated polyaminoborane/polyphosphinoborane alternating copolymers are studied at the MP2/6-311G(2d)//PBE0/6-31G(2d) level of approximation, by using the increasingly large oligomer series methodology. We report the evolution with chain length of geometry parameters, partial atomic charges, electric dipole moments, polarizabilities and first hyperpolarizabilities of both phosphorus- and nitrogen-terminated chains. It turns out that for the saturated copolymer, linear and nonlinear optics properties of the saturated copolymer correspond to an average of the response of polyaminoborane and polyphosphinoborane. For the conjugated copolymer, the response is guided by the least delocalizable component.